1
|
Xu Z, Yang Q, Zheng X, Liu X, Zhao J, Huat Tan S, Liu Z. All-weather-available down carbon fiber hydrogel with enhanced mechanical properties for simultaneous efficient clean water generation and dye adsorption from dye wastewater. J Colloid Interface Sci 2024; 669:864-876. [PMID: 38749225 DOI: 10.1016/j.jcis.2024.05.058] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2024] [Revised: 04/30/2024] [Accepted: 05/09/2024] [Indexed: 05/27/2024]
Abstract
Solar-driven photothermal conversion can produce clean water from dye wastewater while leaving the dye in the evaporation medium. Herein, a biomass-based composite hydrogel via down-fiber carbon (DFC) aerogel modified with chitosan-polyvinyl alcohol (CS-PVA) hydrogel was designed to address the aforementioned problem. The CS-PVA@DFC hydrogel integrated the capacity of simultaneous clean water production/dye adsorption during the day and continuous dye adsorption during the night. Furthermore, the modification of the CS-PVA hydrogel endowed the composite hydrogel with enhanced compression stress of 190.07 kPa (76.03 times that of DFC aerogel of 2.50 kPa) and impressive resilient recovery. Moreover, the CS-PVA@DFC hydrogel possessed solar light absorption of 99.56 % and strengthened water replenishment capacity due to the high porosity and CS-PVA hydrophilic network structure. The CS-PVA@DFC hydrogel demonstrated a stable, high evaporation rate of 2.34 kg·m-2·h-1 and simultaneous dye adsorption capacity of 70.39 % for treating methyl orange dye solution within 5 h. Additionally, the 24-h outdoor test showed that the CS-PVA@DFC hydrogel possessed excellent clean water production capacity during the daytime (reaching 4.17 kg·m-2·h-1 at 1:00p.m.) and continuous satisfactory dye adsorption capacity all day (89.68 %). These findings will inspire researchers seeking opportunities to improve the mechanical properties of aerogel and its application for treating wastewater, especially wastewater with harmful dyes.
Collapse
Affiliation(s)
- Zhenzhen Xu
- School of Textile and Garment, Anhui Polytechnic University, Beijing Mid-Road, Wuhu, 241000, China
| | - Qinqin Yang
- School of Textile and Garment, Anhui Polytechnic University, Beijing Mid-Road, Wuhu, 241000, China
| | - Xianhong Zheng
- School of Textile and Garment, Anhui Polytechnic University, Beijing Mid-Road, Wuhu, 241000, China
| | - Xinhua Liu
- School of Textile and Garment, Anhui Polytechnic University, Beijing Mid-Road, Wuhu, 241000, China
| | - Jianghui Zhao
- School of Textile and Garment, Anhui Polytechnic University, Beijing Mid-Road, Wuhu, 241000, China.
| | - Soon Huat Tan
- School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Pulau Pinang, Malaysia
| | - Zhi Liu
- School of Textile and Garment, Anhui Polytechnic University, Beijing Mid-Road, Wuhu, 241000, China.
| |
Collapse
|
2
|
Wang C, Zhu P, Huang Z, Zhang L, Xie S, Qi Z. Carboxymethylcellulose sodium-derived carbon aerogels for solar-driven water purification. CHEMOSPHERE 2024; 358:142109. [PMID: 38657692 DOI: 10.1016/j.chemosphere.2024.142109] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/27/2023] [Revised: 03/25/2024] [Accepted: 04/20/2024] [Indexed: 04/26/2024]
Abstract
Recycling polluted water via different techniques has become one of the most feasible ways to solve the freshwater crisis. We describe a novel method to prepare reusable and efficient photothermal energy conversion materials for water purification. Using crosslinked xerogels as precursor, the porous and interconnected carboxymethylcellulose sodium-derived carbon aerogels (abbreviated as CCAs) with good hydrophilic performance and strong light absorption capability are firstly fabricated through pyrolysis. Photothermal measurement results show that CCA15 exhibit excellent solar steam generation rate of 2.31 kg m-2 h-1 with high light-to-vapor conversion efficiency of 95.9% under 1 sun illumination. In addition, the feasible application of CCA15 for efficient water purification under 1 sun irradiation using a homemade water treatment device has been demonstrated successfully. The as-prepared CCAs shown in here can be a continuable solution to mitigate the global freshwater crisis.
Collapse
Affiliation(s)
- Chaoming Wang
- Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Aerospace Engineering, Southwest Jiaotong University, Chengdu, Sichuan, 610031, China.
| | - Peng Zhu
- Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Aerospace Engineering, Southwest Jiaotong University, Chengdu, Sichuan, 610031, China
| | - Zheng Huang
- Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Aerospace Engineering, Southwest Jiaotong University, Chengdu, Sichuan, 610031, China
| | - Lei Zhang
- Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Aerospace Engineering, Southwest Jiaotong University, Chengdu, Sichuan, 610031, China
| | - Shuaiao Xie
- Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Aerospace Engineering, Southwest Jiaotong University, Chengdu, Sichuan, 610031, China
| | - Zhiyong Qi
- Institute of Urban Agriculture, Chinese Academy of Agricultural Sciences, Chengdu, 610000, Sichuan, China
| |
Collapse
|
3
|
Zheng D, Wang K, Bai B. A critical review of sodium alginate-based composites in water treatment. Carbohydr Polym 2024; 331:121850. [PMID: 38388034 DOI: 10.1016/j.carbpol.2024.121850] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2023] [Revised: 01/18/2024] [Accepted: 01/19/2024] [Indexed: 02/24/2024]
Abstract
The global freshwater crisis is a pressing issue, especially in areas with little rainfall and inner continental regions. The growing attention to water scarcity has induced increased interest in research on advanced water treatment technologies. As an abundant bioactive material in nature, sodium alginate (SA) has been widely used in water management due to its outstanding water absorption and holding ability, reversible swelling property, and pollutant adsorption performance. Building on this, progress made in using various modified forms of SA to access clean water is addressed in this review. Covering studies concern the adsorption and separation of pollutants in wastewater by SA-based absorbents and freshwater harvesting by SA-based collectors. This review explores SA-based composites' composition-structure-construction designs and emphasizes the impact of materials like inorganic materials, functional polymers, and porous matrices and how they can be exploited for water treatment. It also highlights the mechanisms of contaminants adsorption and freshwater desorption of SA-based composites. Finally, the shortcomings and future orientation of SA-based composites are proposed, including performance optimization, structural modification, application expansion, and mechanism in-depth investigation. This review aims to offer a theoretical basis and technical guidance for the use of natural materials to respond to the shortage of freshwater resources.
Collapse
Affiliation(s)
- Dan Zheng
- School of Chemical and Blasting Engineering, Anhui University of Science and Technology, Huainan 232001, China
| | - Kai Wang
- College of Water Sciences, Beijing Normal University, Beijing 100875, China
| | - Bo Bai
- School of Water and Environment, Chang'an University, Xi'an 710054, China.
| |
Collapse
|
4
|
Chen S, Zheng D, Cen Q, Yoo CG, Zhong L, Yang D, Qiu X. Multifunctional Super-Hydrophilic MXene/Biomass Composite Aerogel Evaporator for Efficient Solar-Driven Desalination and Wastewater Treatment. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2400603. [PMID: 38659175 DOI: 10.1002/smll.202400603] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/25/2024] [Revised: 04/04/2024] [Indexed: 04/26/2024]
Abstract
Solar-driven interfacial evaporation is recognized as a sustainable and effective strategy for desalination to mitigate the freshwater scarcity issue. Nevertheless, the challenges of oil contamination, salt accumulation, and poor long-term stability of the solar desalination process limit its applications. Herein, a 3D biomass-based multifunctional solar aerogel evaporator is developed for water production with fabricated chitosan/lignin (CSL) aerogel as the skeleton, encapsulated with carbonized lignin (CL) particles and Ti3C2TiX (MXene) nanosheets as light-absorbing materials. Benefitting from its super-hydrophilic wettability, interconnected macropore structure, and high broadband light absorption (ca. 95.50%), the prepared CSL-C@MXene-20 mg evaporator exhibited a high and stable water evaporation flux of 2.351 kg m-2 h-1 with an energy conversion efficiency of 88.22% under 1 Sun (1 kW m-2) illumination. The CSL-C@MXene-20 mg evaporator performed excellent salt tolerance and long-term solar vapor generation in a 3.5 wt.% NaCl solution. Also, its super-hydrophilicity and oleophobicity resulted in superior salt resistance and anti-fouling performance in high salinity brine (20 wt.% NaCl) and oily wastewater. This work offers new insight into the manufacture of porous and eco-friendly biomass-based photothermal aerogels for advanced solar-powered seawater desalination and wastewater purification.
Collapse
Affiliation(s)
- Shilin Chen
- School of Chemistry and Chemical Engineering, Guangdong Engineering Research Center for Green Fine Chemicals, South China University of Technology, Guangzhou, 510640, China
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, 381 Wushan Road, Tianhe District, Guangzhou, 510640, China
| | - Dafeng Zheng
- School of Chemistry and Chemical Engineering, Guangdong Engineering Research Center for Green Fine Chemicals, South China University of Technology, Guangzhou, 510640, China
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, 381 Wushan Road, Tianhe District, Guangzhou, 510640, China
| | - Qiulan Cen
- School of Chemistry and Chemical Engineering, Guangdong Engineering Research Center for Green Fine Chemicals, South China University of Technology, Guangzhou, 510640, China
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, 381 Wushan Road, Tianhe District, Guangzhou, 510640, China
| | - Chang Geun Yoo
- Department of Chemical Engineering State University of New York College of Environment Science and Forestry, Syracuse, NY, 13210-2781, USA
| | - Lei Zhong
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| | - Dongjie Yang
- School of Chemistry and Chemical Engineering, Guangdong Engineering Research Center for Green Fine Chemicals, South China University of Technology, Guangzhou, 510640, China
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, 381 Wushan Road, Tianhe District, Guangzhou, 510640, China
| | - Xueqing Qiu
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China
| |
Collapse
|
5
|
Zhang H, Du Y, Jing D, Yang L, Ji J, Li X. Integrated Janus Evaporator with an Enhanced Donnan Effect and Thermal Localization for Salt-Tolerant Solar Desalination and Thermal-to-Electricity Generation. ACS APPLIED MATERIALS & INTERFACES 2023; 15:49892-49901. [PMID: 37815919 DOI: 10.1021/acsami.3c12517] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/12/2023]
Abstract
Solar-driven interfacial evaporation (SIE) technology has great advantages in seawater desalination. However, during the long-term operation of a solar evaporator, salts can be deposited on the solar absorbing surface, which, in turn, hinders the evaporation process. Therefore, there is an urgent need to propose new antisalt strategies to solve this problem. Here, we present a novel cogeneration system leveraging a salt-tolerant, heterogeneous Janus-structured evaporator (FHJE) for simultaneous solar desalination and thermoelectric generation. The top evaporation layer is composed of a graphene-based photothermal membrane pre-embedded with Fe3+ cations, which enhanced solar absorption and energy conversion abilities. Meanwhile, the Fe3+ cations further contribute to the Donnan effect, effectively repelling salt ions in saltwater. The bottom layer comprises a hydrogel composed of hydrophilic phytic acid (PA) and poly(vinyl alcohol) (PVA), fostering facilitation of water transport. The FHJE was demonstrated to exhibit evaporation rate and efficiency as high as 3.655 kg m-2 h-1 and 94.7% in 10 wt% saltwater, respectively, and superior salt resistance ability without salt accumulation after 8 h of continuous evaporation (15 wt%). Furthermore, a hydropower cogeneration evaporator device was constructed, and it possesses an open-circuit voltage (VOC) and a maximum output power density of up to 143 mV and 1.33 W m-2 under 1 sun, respectively. This study is expected to provide new ideas for comprehensive utilization of solar energy.
Collapse
Affiliation(s)
- He Zhang
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu 610059, China
| | - Yuping Du
- School of Chemical Engineering, Sichuan University, Chengdu 610065, China
| | - Dengwei Jing
- International Research Center for Renewable Energy, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China
| | - Liu Yang
- Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, Jiangsu 210096, China
| | - Junyi Ji
- School of Chemical Engineering, Sichuan University, Chengdu 610065, China
- State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu 610065, P. R. China
| | - Xiaoke Li
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu 610059, China
- International Research Center for Renewable Energy, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China
| |
Collapse
|
6
|
Liu H, Gu J, Liu Y, Yang L, Li A, Yu J, Wang L, Qin X. Gradient-Charged Hydrogels for Highly Efficient Solar Steam Generation and Desalination. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:13641-13648. [PMID: 37696039 DOI: 10.1021/acs.langmuir.3c01786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/13/2023]
Abstract
Solar-driven interface desalination (SDID) is a promising and sustainable technology that produces freshwater from brine. Ionic hydrogels are effective evaporators, providing enhanced interaction with water and ions due to the charged groups on hydrophilic polymer networks. In this study, we developed a hydrogel-based solar steam generator with a gradient-charged (GC) structure for desalination. The gradient-charged groups' distribution on the hydrogels creates gradients of free water and osmotic pressure, realizing rapid water supplement as well as desalination of concentrated brine. Consequently, the GC hydrogel demonstrated an exceptional water evaporation rate, achieving a value as high as 2.61 kg m-2 h-1 in pure water and 1.72 kg m-2 h-1 on treating with 20 wt % NaCl solution under one sun illumination. Following the substantial solar-driven evaporation, impurities, including salt and other pollutants, were removed, thereby ensuring the purity of the condensed water. Overall, the GC hydrogel-based evaporator is a promising solution for SDID to achieve effective and sustainable water desalination.
Collapse
Affiliation(s)
- Huijie Liu
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China
| | - Jiatai Gu
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China
| | - Ye Liu
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China
| | - Lei Yang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, International Joint Laboratory for Advanced Fiber and Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China
| | - Ailin Li
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China
| | - Jianyong Yu
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai 201620, China
| | - Liming Wang
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China
| | - Xiaohong Qin
- Key Laboratory of Textile Science & Technology of Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China
| |
Collapse
|
7
|
Arshad N, Irshad MS, Asghar MS, Alomar M, Tao J, Shah MAKY, Wang X, Guo J, Wageh S, Al‐Hartomy OA, Kalam A, Hao Y, Ouyang Z, Zhang H. 2D MXenes Embedded Perovskite Hydrogels for Efficient and Stable Solar Evaporation. GLOBAL CHALLENGES (HOBOKEN, NJ) 2023; 7:2300091. [PMID: 37745825 PMCID: PMC10517291 DOI: 10.1002/gch2.202300091] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/29/2023] [Revised: 06/12/2023] [Indexed: 09/26/2023]
Abstract
Solar evaporation is a facile and promising technology to efficiently utilize renewable energy for freshwater production and seawater desalination. Here, the fabrication of self-regenerating hydrogel composed of 2D-MXenes nanosheets embedded in perovskite La 0.6Sr 0.4Co 0.2Fe 0.8O3- δ (LSCF)/polyvinyl alcohol hydrogels for efficient solar-driven evaporation and seawater desalination is reported. The mixed dimensional LSCF/Ti3C2 composite features a localized surface plasmonic resonance effect in the polymeric network of polyvinyl alcohol endows excellent evaporation rates (1.98 kg m-2 h-1) under 1 k Wm-2 or one sun solar irradiation ascribed by hydrophilicity and broadband solar absorption (96%). Furthermore, the long-term performance reveals smooth mass change (13.33 kg m-2) during 8 h under one sun. The composite hydrogel prompts the dilution of concentrated brines and redissolves it back to water (1.2 g NaCl/270 min) without impeding the evaporation rate without any salt-accumulation. The present research offers a substantial opportunity for solar-driven evaporation without any salt accumulation in real-life applications.
Collapse
Affiliation(s)
- Naila Arshad
- Collaborative Innovation Centre for Optoelectronic Science & TechnologyInternational Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of EducationInstitute of Microscale OptoelectronicsShenzhen UniversityShenzhen518060P. R. China
- Interdisciplinary Center of High Magnetic Field PhysicsCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen518060P. R. China
| | - Muhammad Sultan Irshad
- Collaborative Innovation Centre for Optoelectronic Science & TechnologyInternational Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of EducationInstitute of Microscale OptoelectronicsShenzhen UniversityShenzhen518060P. R. China
- School of Materials Science and EngineeringHubei UniversityWuhan430062P. R. China
| | - M. Sohail Asghar
- School of Materials Science and EngineeringHubei UniversityWuhan430062P. R. China
| | - Muneerah Alomar
- Department of PhysicsCollege of SciencesPrincess Nourah bint Abdulrahman UniversityP. O. Box 84428Riyadh11671Saudi Arabia
| | - Junyang Tao
- School of Materials Science and EngineeringHubei UniversityWuhan430062P. R. China
| | - M. A. K. Yousaf Shah
- School of Energy and EnvironmentSoutheast UniversityNo. 2 Si Pai LouNanjing210096China
| | - Xianbao Wang
- School of Materials Science and EngineeringHubei UniversityWuhan430062P. R. China
| | - Jinming Guo
- School of Materials Science and EngineeringHubei UniversityWuhan430062P. R. China
| | - S. Wageh
- Department of PhysicsFaculty of ScienceKing Abdulaziz UniversityJeddah21589Saudi Arabia
| | - Omar A. Al‐Hartomy
- Research Center for Advanced Materials Science (RCAMS)King Khalid UniversityP. O. Box 9004Abha61413Saudi Arabia
| | - Abul Kalam
- Department of PhysicsFaculty of ScienceKing Abdulaziz UniversityJeddah21589Saudi Arabia
| | - Yabin Hao
- Collaborative Innovation Centre for Optoelectronic Science & TechnologyInternational Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of EducationInstitute of Microscale OptoelectronicsShenzhen UniversityShenzhen518060P. R. China
| | - Zhengbiao Ouyang
- Collaborative Innovation Centre for Optoelectronic Science & TechnologyInternational Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of EducationInstitute of Microscale OptoelectronicsShenzhen UniversityShenzhen518060P. R. China
| | - Han Zhang
- Collaborative Innovation Centre for Optoelectronic Science & TechnologyInternational Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of EducationInstitute of Microscale OptoelectronicsShenzhen UniversityShenzhen518060P. R. China
- Interdisciplinary Center of High Magnetic Field PhysicsCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen518060P. R. China
| |
Collapse
|
8
|
Wang X, Tarahomi M, Sheibani R, Xia C, Wang W. Progresses in lignin, cellulose, starch, chitosan, chitin, alginate, and gum/carbon nanotube (nano)composites for environmental applications: A review. Int J Biol Macromol 2023; 241:124472. [PMID: 37076069 DOI: 10.1016/j.ijbiomac.2023.124472] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2023] [Revised: 04/04/2023] [Accepted: 04/12/2023] [Indexed: 04/21/2023]
Abstract
Water sources are becoming increasingly scarce, and they are contaminated by industrial, residential, and agricultural waste-derived organic and inorganic contaminants. These contaminants may pollute the air, water, and soil in addition to invading the ecosystem. Because carbon nanotubes (CNTs) can undergo surface modification, they can combine with other substances to create nanocomposites (NCs), including biopolymers, metal nanoparticles, proteins, and metal oxides. Furthermore, biopolymers are significant classes of organic materials that are widely used for various applications. They have drawn attention due to their benefits such as environmental friendliness, availability, biocompatibility, safety, etc. As a result, the synthesis of a composite made of CNT and biopolymers can be very effective for a variety of applications, especially those involving the environment. In this review, we reported environmental applications (including removal of dyes, nitro compounds, hazardous materialsو toxic ions, etc.) of composites made of CNT and biopolymers such as lignin, cellulose, starch, chitosan, chitin, alginate, and gum. Also, the effect of different factors such as the medium pH, the pollutant concentration, temperature, and contact time on the adsorption capacity (AC) and the catalytic activity of the composite in the reduction or degradation of various pollutants has been systematically explained.
Collapse
Affiliation(s)
- Xuan Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China
| | - Mehrasa Tarahomi
- Amirkabir University of Technology-Mahshahr Campus, University St., Nahiyeh San'ati, Mahshahr, Khouzestan, Iran
| | - Reza Sheibani
- Amirkabir University of Technology-Mahshahr Campus, University St., Nahiyeh San'ati, Mahshahr, Khouzestan, Iran.
| | - Changlei Xia
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China.
| | - Weidong Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China
| |
Collapse
|
9
|
Setyawan H, Juliananda J, Widiyastuti W. Engineering Materials to Enhance Light-to-Heat Conversion for Efficient Solar Water Purification. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c03170] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/07/2022]
Affiliation(s)
- Heru Setyawan
- Department of Chemical Engineering, Faculty of Industrial Technology and System Engineering, Sepuluh Nopember Institute of Technology, Kampus ITS Sukolilo, Surabaya60111, Indonesia
| | - Juliananda Juliananda
- Department of Chemical Engineering, Faculty of Industrial Technology and System Engineering, Sepuluh Nopember Institute of Technology, Kampus ITS Sukolilo, Surabaya60111, Indonesia
| | - Widiyastuti Widiyastuti
- Department of Chemical Engineering, Faculty of Industrial Technology and System Engineering, Sepuluh Nopember Institute of Technology, Kampus ITS Sukolilo, Surabaya60111, Indonesia
| |
Collapse
|
10
|
Rational design of molybdenum sulfide/tungsten oxide solar absorber with enhanced photocatalytic degradation toward dye wastewater purification. J Colloid Interface Sci 2022; 631:33-43. [DOI: 10.1016/j.jcis.2022.11.015] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2022] [Revised: 10/24/2022] [Accepted: 11/04/2022] [Indexed: 11/09/2022]
|