Removal and recovery of phosphorus from secondary effluent using layered double hydroxide-biochar composites

Lanthanum-calcium bimetallic-modified attapulgite- chitosan hydrogel beads for efficient phosphate removal from water: Performance evaluation, mechanistic and life cycle assessment

Phosphorus is a critical factor in the control of eutrophication. We developed a three-dimensional porous, bimetallic-modified adsorbent La-Ca-CS/ATP to remove excess phosphate from water. Langmuir model showed that the theoretical adsorption capacity of La-Ca-CS/ATP was up to 123 mg P/g. The amount of La and Ca leached by La-Ca-CS/ATP was small, and the adsorption of 36.08 mg P/g was maintained during the five cycles of La-Ca-CS/ATP. The La-Ca-CS/ATP adsorption mechanism mainly involved surface precipitation, ligand exchange, electrostatic attraction, and inner-sphere complexation. Molecular dynamics demonstrated that La and Ca had complementary effects on binding sites and energy barriers within the range of 0.5-0.7 nm and 1.2-2 nm, enhancing the adsorption effect of La-Ca-CS/ATP. The life cycle assessment results showed that adding calcium could help reduce the environmental impact of lanthanum and chitosan. The production of La-Ca-CS/ATP adsorbed 73.88 P mg/g and emitted 24.73 kg CO2 eq, which was less than other adsorbents.

Metal element-based adsorbents for phosphorus capture: Chaperone effect, performance and mechanism

Excessive phosphorus (P) enters the water bodies via wastewater discharges or agricultural runoff, triggering serious environmental problems such as eutrophication. In contrast, P as an irreplaceable key resource, presents notable supply-demand contradictions due to ineffective recovery mechanisms. Hence, constructing a system that simultaneously reduce P contaminants and effective recycling has profound theoretical and practical implications. Metal element-based adsorbents, including metal (hydro) oxides, layered double hydroxides (LDHs) and metal-organic frameworks (MOFs), exhibit a significant chaperone effect stemming from strong orbital hybridization between their intrinsic Lewis acid sites and P (Lewis base). This review aims to parse the structure-effect relationship between metal element-based adsorbents and P, and explores how to optimize the P removal properties. Special emphasis is given to the formation of the metal-P chemical bond, which not only depends on the type of metal in the adsorbent but also closely relates to its surface activity and pore structure. Then, we delve into the intrinsic mechanisms behind these adsorbents' remarkable adsorption capacity and precise targeting. Finally, we offer an insightful discussion of the prospects and challenges of metal element-based adsorbents in terms of precise material control, large-scale production, P-directed adsorption and effective utilization.

Use of waste marble powder for the synthesis of novel calcium-rich biochar: Characterization and application for phosphorus recovery in continuous stirring tank reactors

This study investigates-for the first time-the synthesis of a novel Ca-rich biochar (N-Ca-B) and its potential use for phosphorus (P) recovery from both synthetic solutions (SS) and treated urban wastewater (TUW) in a continuous stirring tank reactor (CSTR) mode. The novel biochar was synthesized by pyrolysis at 900 °C of a mixture composed of three different materials: animal biomass (poultry manure; PM), lignocellulosic waste (date palm fronds; DPFs), and abundant mineral waste (waste marble powder; WMP). Characterization of N-Ca-B showed that it has good textural properties: well-developed porosity, and high specific surface area. Furthermore, high calcium hydroxide (Ca(OH)2) and calcium oxides (CaO) nanoparticle loads were observed on the biochar surface. The dynamic CSTR assays indicated that the P recovery efficiency mainly depended on the biochar mass, P influent concentration, and, especially, the Ca content of the feeding solution. Owing to its richness in Ca cations, TUW exhibited the highest adsorbed P amount (109.2 mg g-1), i.e., about 14% larger than the SS. P recovery occurs through precipitation as hydroxyapatite, surface complexation, and electrostatic interactions with positively charged biochar particles. In real-world scenarios, CSTR systems can be applied as a tertiary treatment step in existing wastewater treatment plants (WWTPs). Decanted P-loaded biochar can be used in agriculture as a slow-release fertilizer instead of commercial products.

FeCa-based layered double hydroxide, a high-performance phosphorus adsorbent in constructed wetlands and ecological dams - A pilot scale study

Research studies have modified traditional substances to seek fast-acting removal of phosphorus in constructed wetlands (CWs) and ecological dams, rather than develop a brand-new nano-adsorbent. This work synthesized FeCa-based layered double hydroxide (FeCa-LDH) with a chemical co-precipitation method, and the performance, mechanism and factors of phosphorus removal were investigated. FeCa-LDH showed a marked ability to adsorb phosphorus from waste water, with a removal efficiency of 94.4% and 98.2% in CWs and ecological dams, respectively. Both FTIR and XPS spectrum evidenced that FeCa-LDH removed phosphorus via electrostatic and hydrogen-bonding adsorption, as well as a coordination reaction and interlayer anion exchange. FeCa-LDH showed a higher capacity to remove phosphorus in alkaline and neutral waste water than in acid conditions. Co-occurrence anions, which influenced the efficiency of the phosphorus removal capacity are considered in the sequence below: CO32- ≈ HCO3- > SO42- > NO3-. Innovatively, FeCa-LDH was not affected by the low-temperature limitation for CWs, and phosphorus removal efficiency at 5 °C was almost equal to that at 25 °C. These results cast a new idea on the construction, application and phosphorus removal performance of CWs and ecological dams.

Recent developments in metallic-nanoparticles-loaded biochars synthesis and use for phosphorus recovery from aqueous solutions. A critical review

Phosphorus (P) represents a major pollutant of water resources and at the same time a vital element for human and plants. P recovery from wastewaters and its reuse is a necessity in order to compensate the current important depletion of P natural reserves. The use of biochars for P recovery from wastewaters and their subsequent valorization in agriculture, instead of synthetic industrial fertilizers, promotes circular economy and sustainability concepts. However, P retention by pristine biochars is usually low and a modification step is always required to improve their P recovery efficiency. The pre- or post-treatment of biochars with metal salts seems to be one of the most efficient approaches. This review aims to summarize and discuss the most recent developments (from 2020- up to now) in: i) the role of the feedstock nature, the metal salt type, the pyrolysis conditions, and the experimental adsorption parameters on metallic-nanoparticles-loaded biochars properties and effectiveness in recovering P from aqueous solutions, as well as the dominant involved mechanisms, ii) the effect of the eluent solutions nature on the regeneration ability of P-loaded biochars, and iii) the practical challenges facing the upscaling of P-loaded biochars production and valorization in agriculture. This review shows that the synthesized biochars through slow pyrolysis at relatively high temperatures (up to 700-800 °C) of mixed biomasses with Ca- Mg-rich materials or impregnated biomasses with specific metals in order to from layered double hydroxides (LDHs) biochars composites exhibit interesting structural, textural and surface chemistry properties allowing high P recovery efficiency. Depending on the pyrolysis's and adsorption's experimental conditions, these modified biochars may recover P through combined mechanisms including mainly electrostatic attraction, ligand exchange, surface complexation, hydrogen bonding, and precipitation. Moreover, the P-loaded biochars can be used directly in agriculture or efficiently regenerated with alkaline solutions. Finally, this review emphasizes the challenges concerning the production and use of P-loaded biochars in a context of circular economy. They concern the optimization of P recovery process from wastewater in real-time scenarios, the reduction of energy-related biochars production costs and the intensification of communication/dissemination campaigns to all the concerned actors (i.e., farmers, consumers, stakeholders, and policymakers) on the benefits of P-loaded biochars reuse. We believe that this review is beneficial for new breakthroughs on the synthesis and green application of metallic-nanoparticles-loaded biochars.

Ca-La layered double hydroxide (LDH) for selective and efficient removal of phosphate from wastewater

Adsorption showed advantages in removing phosphorus (P) at low concentrations. Desirable adsorbents should have sufficiently high adsorption capacity and selectivity. In this study, a Ca-La layered double hydroxide (LDH) was synthesized for the first time by using a simple hydrothermal coprecipitation method for phosphate removal from wastewater. A maximum adsorption capacity of 194.04 mgP/g was achieved, ranking on the top of known LDHs. Adsorption kinetic experiments showed that 0.02 g/L Ca-La LDH could effectively reduce PO₄^3-P from 1.0 to <0.02 mg/L within 30 min. With the copresence of bicarbonate and sulfate at concentrations 17.1 and 35.7 times of that of PO₄^3-P, the Ca-La LDH showed promising selectivity towards phosphate (with a reduction in the adsorption capacity of <13.6%). In addition, four other (Mg-La, Co-La, Ni-La, and Cu-La) LDHs containing different divalent metal ions were synthesized by using the same coprecipitation method. Results showed much higher P adsorption performance of the Ca-La LDH than those LDHs. Field Emission Electron Microscopy (FE-SEM)-Energy Dispersive Spectroscopy (EDS), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), and mesoporous analysis were performed to characterize and compare the adsorption mechanisms of different LDHs. The high adsorption capacity and selectivity of the Ca-La LDH were mainly explained by selective chemical adsorption, ion exchange, and inner sphere complexation.

Egg White-Mediated Fabrication of Mg/Al-LDH-Hard Biochar Composite for Phosphate Adsorption

Phosphorus is one of the main causes of water eutrophication. Hard biochar is considered a promising phosphate adsorbent, but its application is limited by its textural properties and low adsorption capacity. Here, an adhesion approach in a mixed suspension containing egg white is proposed for preparing the hybrid material of Mg/Al-layered double hydroxide (LDH) and almond shell biochar (ASB), named L-AE or L-A (with or without egg white). Several techniques, including XRD, SEM/EDS, FTIR and N2 adsorption/desorption, were used to characterize the structure and adsorption behavior of the modified adsorbents. The filament-like material contained nitrogen elements at a noticed level, indicating that egg white was the crosslinker that mediated the formation of the L-AE hybrid material. The L-AE had a higher phosphate adsorption rate with a higher equilibrium adsorption capacity than the L-A. The saturation phosphate adsorption capacity of L-AE was nearly three times higher than that of L-A. Furthermore, the number of surface groups and the density of the positively charged surface sites follow the ASB < L-A < L-AE order, which is consistent with their phosphate adsorption performance. The study may offer an efficient approach to improving hard biochar’s adsorption performance in wastewater treatment.