Alfalfa biochar supported Mg-Fe layered double hydroxide as filter media to remove trace metal(loid)s from stormwater

Adsorption of heavy metals by biochar in aqueous solution: A review

Heavy metal pollution (e.g., Cd, Hg, Pb, Cu, Ni, Zn, As and Cr) has become a crucial issue worldwide. Among various remediation strategies, adsorption is widely recognized for its environmental sustainability, cost-effectiveness, and operational simplicity. In this context, biochar has gained significant attention due to its promising adsorption performance. To systematically support adsorption studies, this review compiled essential models for adsorption experiments, including commonly used adsorption kinetics models, isotherm models, and thermodynamic analysis methods. Moreover, we systematically analyzed key factors affecting heavy metal adsorption by biochar, such as its physicochemical properties, environmental pH, temperature, initial concentration, dosage, and the presence of coexisting ions, to identify the conditions that govern adsorption capacity. In addition, the adsorption performance of biochar toward eight significant heavy metals is reviewed in detail, with a focus on elucidating the underlying mechanisms, including complexation, ion exchange, cation-π bonding, electrostatic interactions, and precipitation. Finally, based on identified research gaps and critical challenges, we discuss emerging research tools, including machine learning and advanced surface modifications, to guide the targeted design of biochar materials for enhanced adsorption capacity.

Biomass chitosan/sodium alginate colorimetric imprinting hydrogels with integrated capture and visualization detection for cadmium(II)

Due to Cd(II) with highly toxic, persistent and bioaccumulative, the discharge of it into the environment brings serious pollution. Developing strategies that are efficient, low-cost, pollution-free and specific to removing Cd(II) from wastewater is therefore of great urgency and prime importance. A novel chitosan/sodium alginate ionic imprinting(IICA) hydrogels with specific adsorption capacity for Cd(II) was prepared through freeze-thaw and ion imprinting, and finally the colorimetric sensor (IICAS) was prepared via introducing Rhodamine B(RhB) and Victoria blue(VBB) by immersion to achieve visual detection of Cd(II). The IICA hydrogels with imprinted hole structure had higher adsorption capacity and better specific selectivity for Cd(II). As well as internal diffusion, coordination, ion exchange, and hydrogen bonding influenced the adsorption rate. Moreover, the IICAS exhibited good selective detection ability and linearity for Cd(II) with the fitted correlation coefficient (R2) = 0.98, limit of detection (LOD) = 35 nmol/L. Combined with the smartphone platform, portable and quantitative detection of Cd(II) can be achieved, Within the 0-100 mg/L range, R2 remained 0.94, and LOD was 75 nmol/L. This strategy of preparing a novel whole biomass IICAS integrating capture and visual detection provides a new insight into the construction of a promising candidate sensor for the removal and detection of Cd(II).

High-performance biochar-loaded MgAl-layered double oxide adsorbents derived from sewage sludge towards nanoplastics removal: Mechanism elucidation and QSAR modeling

Utilization of sewage sludge for the fabrication of environmental functional materials is highly desirable to achieve pollution mitigation and resource recovery. In the present work, we introduced a novel MgAl-layered double oxide (LDO)@biochar composite adsorbent in-situ fabricated from Al-rich sewage sludge, and its excellent application in nanoplastics adsorption. Initially, fifteen model contaminants with varied conjugate structures, hydrogen bonding and ionic properties were selected for an investigation of adsorption behavior and adsorption selectivity on LDO@biochar. Structural variation of LDO@biochar suggested reconstruction of the layered double hydroxide (LDH) during the adsorption process due to the "memory effect". Under the synergy of LDH and biochar, the contaminants were adsorbed via multiple adsorbent-adsorbate interactions, including anion exchange, electrostatic interaction, hydrogen bonding and π-π conjugation. Then, a quantitative structure-activity relationship (QSAR) model was constructed by integrating the number of hydrogen bond acceptors, polarity surface area, number of aromatic rings, and Fukui index f(-)x together to reflect the affinity of each contaminant to the adsorbent. Guided by the QSAR model, the negatively charged polystyrene nanoplastics with continuously conjugated aromatic rings were predicted to be effectively adsorbed on LDO@biochar. Experimental tests confirmed a great capacity of LDO@biochar towards the polystyrene nanoplastics, given the equilibrium adsorption capacity as high as 360 mg g-1 at 30-50 °C. This work not only opened up a new avenue for sustainable utilization of sewage sludge towards high-performance environmental functional materials, but also demonstrated the potential of the QSAR analysis as a rapid and accurate approach for guiding the application of an adsorbent to new emerging containments.

Enhancing sorption of layered double hydroxide-based magnetic biochar for arsenic and cadmium through optimized preparation protocols

The impact of multiple preparation protocols on properties and performance of modified biochar remains unclear. This study prepared layered double hydroxide (LDH)-based magnetic biochars (LMBCs) with different LDH loading rates (LLR), pyrolysis temperatures, and biomass sources to explore their performance-characterization relationships toward As(III) and Cd(II). Higher LLR and pyrolysis temperature enhanced LMBCs᾿ adsorption capacities by increasing specific surface area (SSA) and metal/O-containing groups. Hence, LMBC produced at 2:1 LLR (LDH: magnetic biochar) and 800 ℃ pyrolysis exhibited maximum adsorption over 2 times that of LMBC with 0.5:1 LLR and 400 ℃ pyrolysis. Bamboo-sourced LMBC demonstrated superior adsorption than sewage sludge and garlic-sourced LMBCs due to its increased SSA, enabling a higher loading of nano-LDH. Adsorption of As(III) and Cd(II) onto LMBCs was governed by metal-mineral and metal-containing group through co-precipitation and complexation. This study provides a reference for adjusting the preparation protocols to improve sorption performance of modified biochar toward multiple heavy metals.

Effective adsorption of Pb(ii) from wastewater using MnO2 loaded MgFe-LD(H)O composites: adsorption behavior and mechanism

Pb(ii) adsorption by MnO₂/MgFe-layered double hydroxide (MnO₂/MgFe-LDH) and MnO₂/MgFe-layered metal oxide (MnO₂/MgFe-LDO) materials was experimentally studied in lab-scale batches for remediation property and mechanism analysis. Based on our results, the optimum adsorption capacity for Pb(ii) was achieved at the calcination temperature of 400 °C for MnO₂/MgFe-LDH. Langmuir and Freundlich adsorption isotherm models, pseudo-first-order and pseudo-second-order kinetics, Elovich model, and thermodynamic studies were used for exploring the Pb(ii) adsorption mechanism of the two composites. In contrast to MnO₂/MgFe-LDH, MnO₂/MgFe-LDO_{400 °C} has a stronger adsorption capacity and the Freundlich adsorption isotherm model (R² > 0.948), the pseudo-second-order kinetic model (R² > 0.998), and the Elovich model (R² > 0.950) provide great fits to the experimental data, indicating that the adsorption occurs predominantly via chemisorption. The thermodynamic model suggests that MnO₂/MgFe-LDO_{400 °C} is spontaneously heat-absorbing during the adsorption process. The maximum adsorption capacity of MnO₂/MgFe-LDO_{400 °C} for Pb(ii) was 531.86 mg g^-1 at a dosage of 1.0 g L^-1, pH of 5.0, and temperature of 25 °C. Through characterization analysis, the main mechanisms involved in the adsorption process were precipitation action, complexation with functional groups, electrostatic attraction, cation exchange and isomorphic replacement, and memory effect. Besides, MnO₂/MgFe-LDO_{400 °C} has excellent regeneration ability in five adsorption/desorption experiments. The above results highlight the powerful adsorption capacity of MnO₂/MgFe-LDO_{400 °C} and may inspire the development of new types of nanostructured adsorbents for wastewater remediation.

Removal Performance and Mechanism of Emerging Pollutant Chloroquine Phosphate from Water by Iron and Magnesium Co-Modified Rape Straw Biochar

Chloroquine phosphate (CQP) is effective in treating coronavirus disease 2019 (COVID-19); thus, its usage is rapidly increasing, which may pose a potential hazard to the environment and living organisms. However, there are limited findings on the removal of CQP in water. Herein, iron and magnesium co-modified rape straw biochar (Fe/Mg-RSB) was prepared to remove CQP from the aqueous solution. The results showed that Fe and Mg co-modification enhanced the adsorption efficiency of rape straw biochar (RSB) for CQP with the maximum adsorption capacity of 42.93 mg/g (at 308 K), which was about two times higher than that of RSB. The adsorption kinetics and isotherms analysis, as well as the physicochemical characterization analysis, demonstrated that the adsorption of CQP onto Fe/Mg-RSB was caused by the synergistic effect of pore filling, π-π interaction, hydrogen bonding, surface complexation, and electrostatic interaction. In addition, although solution pH and ionic strength affected the adsorption performance of CQP, Fe/Mg-RSB still had a high adsorption capability for CQP. Column adsorption experiments revealed that the Yoon-Nelson model better described the dynamic adsorption behavior of Fe/Mg-RSB. Furthermore, Fe/Mg-RSB had the potential for repeated use. Therefore, Fe and Mg co-modified biochar could be used for the remediation of CQP from contaminated water.