Adsorption, boiling or membrane filtration for disinfection by-product removal: How to make our drinking water safer?

Optimization of anode positioning in constructed wetlands coupled with microbial fuel cells based on C/O microenvironment for simultaneous removal of disinfection by-products and nitrogen

Constructed wetland coupled with microbial fuel cell (CW-MFC) has been applied for the advanced removal of emerging contaminants and nitrogen due to its sustainability potential. However, the impact of anode positioning on the synergistic removal of disinfection by-products (DBPs) and nitrogen in CW-MFC remains insufficiently understood. In this study, three CW-MFCs with different anode positions were constructed to explore the response differences in the removal of DBPs (represented by haloacetic acids-HAAs) and nitrogen. It was observed that the CW-MFC with the anode positioned centrally exhibited considerable nitrogen removal (TN removal efficiency: 56.3 ± 8.6 %) and HAAs degradation performance (dichloroacetic acid removal efficiency: 97.8 ± 1.3 %). Correlation analysis identified the advantageous carbon-oxygen environment at the anode as the most critical factor. Furthermore, this carbon-oxygen environment (CODcr-anode/DO=27.7) directly provided favorable conditions for electroactive bacteria to inhabit the anode, significantly enriching denitrifiers and HAAs-degrading bacteria at the cathode. Key genes (HAAs and carbon-nitrogen metabolic) were upregulated, clarifying the mechanisms of synergistic removal of HAAs and nitrogen in CW-MFCs with centrally positioned anodes. This study highlights the importance of CW-MFCs with anode positioning in the synergistic removal of DBPs and nitrogen, providing straightforward and feasible strategy for optimizing CW-MFC performance and scaling up.

The released micro/nano-plastics from plastic containers amplified the toxic response of disinfection by-products in human cells

Micro- and nanoplastics (MNPs) released from plastic containers pose significant food safety concerns; however, their release patterns in different containers along with their impacts on other pollutants remain poorly understood. This study revealed that feeding bottles, food containers, and paper cups released approximately 104 microplastics and 107 nanoplastics after hot water treatment. These released MNPs were nontoxic in six cell types, whereas they significantly amplified the toxicity of disinfection by-products (DBPs), a widely existing contaminant in drinking water. The joint toxicity was influenced by MNPs size, the types of cells and DBPs, with a maximum synergistic efficiency of 57.89 ± 4.64 % in human hepatic carcinoma cells (HepG2) exposed to nanoplastics from feeding bottles and iodoacetamide. Additionally, the exposure assessment indicated that released MNPs posed greater risks to infants. These findings suggested that while MNPs alone were nontoxic, their interactions with DBPs presented potential risks, particularly for sensitive populations.

Characterization of Disinfection By-Products Originating from Residual Chlorine-Based Disinfectants in Drinking Water Sources

In this study, samples from the Yangtze River, Han River, and Liangzi Lake in Wuhan City were utilized to characterize the formation of disinfection by-products (DBPs) from chlorine-based disinfection residues in drinking water sources. The results indicated that the main DBPs in drinking water sources were trichloromethane (TCM) and trichloroacetic acid (TCAA). The generation of DBPs was significantly positively correlated with oxidative substances, aromatic compounds, pH, and ammonia nitrogen (NH3-N) content in the water. The concentration of TCAA increased from 0 to 2.45 ± 0.31 mg/L when the reaction time increased to 72 h. As the NaClO concentration increased from 5 mg/L to 15 mg/L, the concentrations of TCAA, TBM, and DCAN increased from 2.03 ± 0.04 mg/L, 0 mg/L, and 0 mg/L to 2.49 ± 0.34 mg/L, 0.21 ± 0.07 mg/L, and 0.10 ± 0.04 mg/L before decreasing to 1.75 ± 0.19 mg/L, 0.17 ± 0.07 mg/L, and 0.04 ± 0.05 mg/L, respectively. The orthogonal experimental results showed that Br-, NH3-N, and pH all had significant influences on the TCM generation, whereas temperature affected the formation of TCAA in the Han River. This work reveals the factors influencing the generation of DBPs from chlorine-based disinfection residues, offering a prevention and control method for DBPs in drinking water sources from a theoretical perspective.

Engineered MXene/Bi2S3 nanoflowers in sodium alginate hydrogel: A synergistic eradicator of disinfected byproducts in aqueous environment

In this work, Bi2S3 nanoflowers were in situ anchored on the surface of Ti3C2 via a hydrothermal process to obtain MXene-supported Ti3C2/Bi2S3 nanocomposite, then incorporated inside in sodium alginate polymer to prepared hydrogel materials (Ti3C2/Bi2S3@SA-H) which outperforms and have an excellent capability for the removal of pollutants like disinfected byproducts. The synthesized hydrogel material Ti3C2/Bi2S3@SA-H may be utilized for a variety of functional materials in environmental applications. Furthermore, the Ti3C2/Bi2S3@SA-H was characterized by SEM, EDX, XRD, BET, AFM, FTIR, Zeta potential, XPS, Raman and TGA. Remarkably, Ti3C2/Bi2S3@SA-H hydrogel 0.007 cm3 g-1, 159.5 nm and 0.0017 cm3 g-1, 160.5 nm materials exhibited the highest average pore diameter. The research focused on evaluating the adsorption capability of Ti3C2/Bi2S3@SA-H hydrogel materials for 2,6-dibromo-4-nitrophenol (DBNP), 2,4,6-triiodophenol (TIP), 2,4,6-Trichlorophenol (TCP) and 2,6-dichloro-4-nitrophenol (DCNP). The findings indicated that the material exhibited the eradication efficiency of about 662, 657, 647 and 617 mg/g from DBNP, TIP, TCP and DCNP respectively. Several adsorption isotherms were extensively examined, encompassing the Temkin, Langmuir and Freundlich models, alongside pseudo-first and second-order models. The Langmuir and pseudo-second-order models showed the highest degree of consistency with the observed data. Concerning regeneration and reusability, the materials demonstrated easy regeneration and effective recyclability over the course of 10 cycles. The notable adsorption capacity, coupled with the innovative combination of Ti3C2/Bi2S3 and polymer hydrogel, along with its recyclability, positions our material Ti3C2/Bi2S3@SA-H as a highly prospective competitors for wastewater treatment and other critical areas in water research.

Biopolymeric Nanocomposites for Wastewater Remediation: An Overview on Recent Progress and Challenges

Essential for human development, water is increasingly polluted by diverse anthropogenic activities, containing contaminants like organic dyes, acids, antibiotics, inorganic salts, and heavy metals. Conventional methods fall short, prompting the exploration of advanced, cost-effective remediation. Recent research focuses on sustainable adsorption, with nano-modifications enhancing adsorbent efficacy against persistent waterborne pollutants. This review delves into recent advancements (2020-2023) in sustainable biopolymeric nanocomposites, spotlighting the applications of biopolymers like chitosan in wastewater remediation, particularly as adsorbents and filtration membranes along with their mechanism. The advantages and drawbacks of various biopolymers have also been discussed along with their modification in synthesizing biopolymeric nanocomposites by combining the benefits of biodegradable polymers and nanomaterials for enhanced physiochemical and mechanical properties for their application in wastewater treatment. The important functions of biopolymeric nanocomposites by adsorbing, removing, and selectively targeting contaminants, contributing to the purification and sustainable management of water resources, have also been elaborated on. Furthermore, it outlines the reusability and current challenges for the further exploration of biopolymers in this burgeoning field for environmental applications.