Dental implant primary stability in different regions of the Jawbone: CBCT-based 3D finite element analysis

Evaluating Micro-computed Tomography in Dental Implant Osseointegration: A Systematic Review and Meta-analysis

RATIONALE AND OBJECTIVES

The success of dental implants is heavily dependent on the implant's efficient integration with the surrounding bone, a process known as osseointegration. This integration is influenced by a range of individual characteristics of each patient, as well as the accuracy of diagnostic imaging techniques. Micro-computed tomography (micro-CT) is capable of capturing detailed three-dimensional images with high resolution. It may offer superior capabilities for assessing the connections between bones and implants compared to older techniques such as cone-beam computed tomography (CBCT) and intraoral radiography. This systematic review will discuss the uses of micro-CT in dental implant osseointegration, compare it to other radiography methods, and discuss it's effect on patients, especially those with previous history of periodontal disease.

MATERIALS AND METHODS

This research performed an extensive search across multiple databases, choosing papers based on specific criteria for inclusion and exclusion. The study focus was on using micro-CT to evaluate bone osseointegration. Meta-analyses were conducted to measure the impact of micro-CT on bone loss and the success rates of implants, while comparing various surgical procedures and depths of implantation. This systematic review is registered in PROSPERO with the registration number CRD42023482747.

RESULTS

The result of this study comprised 28 papers, incorporating a meta-analysis of 8. It emphasized the exceptional spatial resolution of micro-CT, which enables accurate assessments of bone volume and density, crucial factors for implant success. Micro-CT, when compared to CBCT and intraoral radiography, provides more comprehensive information, but it faces limitations due to its elevated expenses and radiation exposure. The analysis also indicated that micro-CT could be particularly advantageous in tailored therapy planning, particularly for patients with impaired conditions. Systemic factors like diabetes or periodontal disease can cause bone conditions.

CONCLUSION

Micro-CT is a highly advanced imaging technique that offers extensive information about dental implants, which is essential for evaluating osseointegration. Although micro-CT has several limitations, it has the capacity to improve clinical outcomes by providing more accurate diagnoses and tailored implant techniques. Subsequent investigations should focus on assessing its cost-effectiveness and establishing protocols to mitigate radiation exposure.

Finite-Element Analysis of the Effect of Utilizing Various Material Assemblies in “All on Four” on the Stresses on Mandible Bone and Prosthetic Parts

Background. Fixed prostheses often utilize the “All-on-four” technique, in which four implants are inserted into the jaw bone, and a framework supports them. Titanium is usually used in the fabrication of “All-on-four” parts, due to its superior mechanical properties; however, it has drawbacks such as aesthetic impairment, casting issues, stress shielding, and incompatibility with imaging techniques. These drawbacks have motivated researchers to find alternative materials such as polymers. Recently, the new polymeric material PEEK has a major role in most areas of dentistry, and therefore, it can represent an alternative biomaterial to overcome the drawbacks of titanium. The density of bone is expected to influence the choice of “All-on-four” materials. Purpose. This research applied finite-element investigations to evaluate the stresses on bone tissues and prosthetic parts in “All on four,” utilizing three assemblies of materials, in normal and low bone densities. These assemblies were titanium (Type 1), titanium/PEEK (Type 2), and PEEK (Type 3). Materials and Methods. A 3D Mandibular model was constructed with a fixed prosthesis, and three assemblies of materials were stimulated, under 300 N unilateral force. The von Mises stresses were computed for the prosthetic parts and mucosa, while the maximum and minimum principal stresses/strains were computed for bone tissues due to their brittle and ductile properties. Moreover, the displacements of implants were extracted to check the prosthesis stability. Results. Type 2 and Type 3 minimized the stresses on frameworks, implants, abutments, and bone tissues, however, increased the mucosal stress, in comparison to Type 1. In the low-density model, Type 3 was recommended to reduce the stresses/strains on bone tissues and decrease the implant displacement, avoiding bone failure and increasing prosthesis stability. Conclusions. The bone density influenced the choice of “All-on-four” assembly. Moreover, further research on PEEK implants and abutments is required in the future.

The Importance of Correlation between CBCT Analysis of Bone Density and Primary Stability When Choosing the Design of Dental Implants—Ex Vivo Study

This study aims to determine the correlation between the mean value of bone density measured on the CBCT device and the primary stability of dental implants determined by resonant frequency analysis. An experimental study was conducted on a material of animal origin: bovine femur and pig ribs. Two types of implants were used in this study: self-tapping and non-self-tapping of the same dimensions. Results of the experimental study showed a statistically significant correlation between bone density expressed in HU units and the primary stability of self-tapping and non-self- tapping dental implants expressed in ISQ units in bovine femur bones and self-tapping implants and pig rib bones. There was no statistically significant correlation between non-self-tapping dental implants in pig rib bones. Self-tapping and non-self-tapping implants did not show statistical significance in the primary stability in bones of different qualities. The analysis of bone density from CBCT images in the software of the apparatus expressed in HU units can be used to predict the degree of primary stability of self-tapping and non-self-tapping dental implants in bones of densities D1 and D2, and self-tapping dental implants in bones of the lower quality D4.

Inter radicular bone dimensions in primary stability of immediate molar implants - A cone beam computed tomography retrospective analysis

Purpose

The purpose of the study was to analyze the dimensions of socket morphology, interradicular bone dimensions, root length and morphology, buccal cortical bone thickness and gap defect between the implant bone in mandibular molars with cone beam computed tomography (CBCT) for immediate molar implant (IMI) placement.

Materials and methods

Sample sizes of 300 mandibular 1st and 2nd molars were each selected from the CBCT scans by inclusion and exclusion criteria. CBCT measurements were performed for socket size morphology, mesiodistal width, and buccolingual cancellous bone width at the crest at the apex. Width of the buccal cortical plate at the crest and interradicular bone (IRB) at the apex, 3 mm cervical to the apex and 6 mm cervical to the apex. Vertical parameters from the crest to furcation (L1), length from furcation to the apex (L2) and mesiodistal root morphology were measured to analyze the root configuration.

Results

All the parameters were analyzed for descriptive statistics for the mean and standard deviation. The majority were of Type B and C socket morphology with peri-implant bone defects of 2–2.5 mm, and the interradicular bone septum (IRB) was moderate for both first molar (1 M) and second molar (2 M) sites, but 2 M was shown to have less IRB than 1 M. Adequate buccal cortical bone thickness of 1.1 mm to 1.4 mm and buccolingual cancellous bone width were measured for both the 1 M and 2 M sites.

Conclusion

The morphology of the molar extraction socket determines the adequate stability for IMI. In mandibular molar teeth, where interradicular bone is incompetent in providing good primary stability, in addition to interradicular bone, clinicians should look for support from the apical bone and interdental septal bone for attaining primary stability of IMI.

Three-Dimensional Finite Element Investigation into Effects of Implant Thread Design and Loading Rate on Stress Distribution in Dental Implants and Anisotropic Bone

Variations in the implant thread shape and occlusal load behavior may result in significant changes in the biological and mechanical properties of dental implants and surrounding bone tissue. Most previous studies consider a single implant thread design, an isotropic bone structure, and a static occlusal load. However, the effects of different thread designs, bone material properties, and loading conditions are important concerns in clinical practice. Accordingly, the present study performs Finite Element Analysis (FEA) simulations to investigate the static, quasi-static and dynamic response of the implant and implanted bone material under various thread designs and occlusal loading directions (buccal-lingual, mesiodistal and apical). The simulations focus specifically on the von Mises stress, displacement, shear stress, compressive stress, and tensile stress within the implant and the surrounding bone. The results show that the thread design and occlusal loading rate have a significant effect on the stress distribution and deformation of the implant and bone structure during clinical applications. Overall, the results provide a useful insight into the design of enhanced dental implants for an improved load transfer efficiency and success rate.