Mixed reverse micellar systems for extraction and purification of β-glucosidase

Extraction and reimmobilization of used commercial lipase from industrial waste

In industrial application, immobilized lipase are typically not reused and served as industrial waste after a certain process is completed. The capacity on the reusability of the spent lipase is not well studied. This current study embarks on reusing the remaining lipase from the spent immobilized enzyme. Active lipases were recovered using a simple reverse micellar extraction (RME). RME is the extraction process of targeted biomolecules using an organic solvent and a surfactant. This method was the first attempt reported on the recovery of the lipase from the used immobilized lipase. RME of the spent lipase was done using the nonionic Triton X-100 surfactant and toluene. Various parameters were optimized to maximize the lipase recovery from the used immobilized lipase. The optimum forward extraction condition was 0.075 M KCl, and backward conditions were at 0.15 M Triton X-100/toluene (pH 6, 2 M KCl) with recovery of 66%. The extracted lipase was immobilized via simple adsorption into the ethanol pretreated carrier. The optimum conditions of immobilization resulted in 96% of the extracted lipase was reimmobilized. The reimmobilized lipase was incubated for 20 h in pH 6 buffer at 50 °C of water bath shaker. The reimmobilized lipase still had 27% residual activity after 18 h of incubation, which higher thermal stability compared to the free lipase. In conclusion, the free lipase was successfully extracted from the spent immobilized lipase and reimmobilized into the new support. It exhibited high thermal stability, and the reusability of the spent lipase will promote continued use of industrial lipase and reduce the cost of the manufacturing process.

Spatial Distribution and Solvent Polarity-Triggered Release of a Polypeptide Incorporated into Invertible Micellar Assemblies

Extracting, stabilizing, or delivering biomacromolecules such as proteins and peptides in organic phases have potential applications in biocatalysis, protein extraction, and food antioxidation. However, most current delivery/stabilization platforms face various limitations such as protein/peptide molecular size, platform stability/reusability, and/or potential damage to the cargos. A potential solution to these problems is micellar self-assemblies from amphiphilic invertible polymers, which have recently been demonstrated to be powerful as molecular hosts to deliver both small molecular drugs and functional polypeptides in the aqueous phase. To better understand the function of biomacromolecules and predict the usefulness of the formed invertible micellar assemblies (IMAs) as biomacromolecular hosts in organic phases, it is critical to characterize the spatial distribution, structure, and dynamics of biomacromolecules in the IMA including those upon release. However, the background signals of the IMAs limit the application of most peptide characterization approaches. In this work, we overcome the technical barriers by using site-directed spin labeling electron paramagnetic resonance to probe the spatial arrangement and release of a model, the hemagglutinin (HA) peptide, in the IMAs formed from two different amphiphilic invertible polymers. By site-specifically probing three residues along the peptide chain, for the first time, we depict the possible spatial distribution of HA within the IMAs. By triggering the disassembly of the IMAs with a thermodynamically good solvent (in this study, acetone), we detailed the stability of IMAs in toluene and the peptide release conditions once the polarity of the medium changes. Our findings are important for the application of peptides/proteins at the polar-nonpolar interface or using this interface to extract or deliver biomacromolecules. Our work also demonstrates the power of SDSL-EPR on probing peptide or micelle dynamics, which can be generalized to understand proteins or other biomacromolecules in micellar polymer assemblies in varied applications.

Reverse micelle Extraction of Antibiotics using an Eco-friendly Sophorolipids Biosurfactant

Reverse micelles extraction of erythromycin and amoxicillin were carried out using the novel Sophorolipids biosurfactant. By replacing commonly used chemical surfactants with biosurfactant, reverse micelle extraction can be further improved in terms of environmental friendliness and sustainability. A central composite experimental design was used to investigate the effects of solution pH, KCl concentration, and sophorolipids concentration on the reverse micelle extraction of antibiotics. The most significant factor identified during the reverse micelle extraction of both antibiotics is the pH of aqueous solutions. Best forward extraction performance for erythromycin was found at feed phase pH of approximately 8.0 with low KCl and sophorolipids concentrations. Optimum recovery of erythromycin was obtained at stripping phase pH around 10.0 and with low KCl concentration. On the other hand, best forward extraction performance for amoxicillin was found at feed phase pH around 3.5 with low KCl concentration and high sophorolipids concentration. Optimum recovery of erythromycin was obtained at stripping phase pH around 6.0 with low KCl concentration. Both erythromycin and amoxicillin were found to be very sensitive toaqueous phase pH and can be easily degraded outside of their stable pH ranges.

Reverse micellar extraction of lactoferrin from its synthetic solution using CTAB/n-heptanol system

The partitioning of Lactoferrin (LF) into the reverse micellar phase formed by a cationic surfactant, cetyltrimethylammonium bromide (CTAB) in n-heptanol from the synthetic solution of LF was studied. The solubilization behaviour of LF into the reverse micellar phase and back extraction using a fresh stripping phase were improved by studying the effect of processing parameters, including surfactant concentration, solution pH, electrolyte salt concentration and addition of alcohol as co-solvent. Forward extraction of 100% was achieved at CTAB concentration of 50 mM in n-heptanol solvent, pH of 10 and 1 M NaCl. The electrostatic force and hydrophobic interaction have major influence on LF extraction during forward and back extraction respectively. The size of the reverse micelles and their corresponding water content were measured at different operating conditions to assess their role on the LF extraction. The present reverse micellar system has potential to solubilise almost all the LF into the reverse micelles during forward extraction and could able to allow back extraction from the reverse micellar phase with addition of small amount of co-solvent.