1
|
Sivaraman S, Michael Anbuselvan N, Venkatachalam P, Ramiah Shanmugam S, Selvasembian R. Waste tire particles as efficient materials towards hexavalent chromium removal: Characterisation, adsorption behaviour, equilibrium, and kinetic modelling. CHEMOSPHERE 2022; 295:133797. [PMID: 35122814 DOI: 10.1016/j.chemosphere.2022.133797] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2021] [Revised: 01/08/2022] [Accepted: 01/27/2022] [Indexed: 06/14/2023]
Abstract
The growing demand for vehicles is increasing every year, and this paves the way for the environmental problem for the generation of the waste tire (WT) and associated disposal after their end life. On the other direction, effluent from tannery and electroplating industries contented with a higher concentration of chromium, which is a toxic pollutant, induces mutation effects. In this work, the approach of reutilization of waste tires as adsorbent is reported towards the sequestrations of hexavalent chromium (Cr(VI)) from the simulated system. The waste tire sample is activated using orthophosphoric acid (H3PO4) and utilized for adsorption studies. Adsorption studies are performed with native tire sample (NTP) and activated tire sample (ATP). About 96.5% of Cr(VI) adsorption efficiency was attained using ATP and at the optimal adsorption solution pH 2.0. The adsorbent performed relatively well in wide a range of initial solution pH tested in the present research. The experimental data analysis of Cr(VI) adsorption onto NTP and ATP revealed the best fit with the kinetic model of pseudo-second-order. Further, the equilibrium data were analysed using two-parameter isotherms, relatively the Langmuir isotherm best represented in both NTP and ATP. ATP demonstrated with higher Cr(VI) removal performance with an adsorption capacity of 102.90 mg/g, according to the Langmuir model. The proposed idea of utilizing waste tire particles as adsorbents in the treatment of Cr(VI) contaminated water offers valuable guidance towards further investigations in the directions of dynamic adsorption and effluent treatment.
Collapse
Affiliation(s)
- Subramaniyasharma Sivaraman
- Center for Bioenergy, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, 613401, India
| | - Nithin Michael Anbuselvan
- Department of Chemical Engineering, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, 613401, India
| | - Ponnusami Venkatachalam
- Center for Bioenergy, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, 613401, India; Department of Chemical Engineering, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, 613401, India
| | - Saravanan Ramiah Shanmugam
- Center for Bioenergy, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, 613401, India.
| | - Rangabhashiyam Selvasembian
- Center for Bioenergy, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, 613401, India; Department of Chemical Engineering, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, 613401, India.
| |
Collapse
|
2
|
Pressure-Driven Membrane Process: A Review of Advanced Technique for Heavy Metals Remediation. Processes (Basel) 2021. [DOI: 10.3390/pr9050752] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/30/2023] Open
Abstract
Pressure-driven processes have come a long way since they were introduced. These processes, namely Ultra-Filtration (UF), Nano-Filtration (NF), and Reverse-Osmosis (RO), aim to enhance the efficiency of wastewater treatment, thereby aiming at a cleaner production. Membranes may be polymeric, ceramic, metallic, or organo-mineral, and the filtration techniques differ in pore size from dense to porous membrane. The applied pressure varies according to the method used. These are being utilized in many exciting applications in, for example, the food industry, the pharmaceutical industry, and wastewater treatment. This paper attempts to comprehensively review the principle behind the different pressure-driven membrane technologies and their use in the removal of heavy metals from wastewater. The transport mechanism has been elaborated, which helps in the predictive modeling of the membrane system. Fouling of the membrane is perhaps the only barrier to the emergence of membrane technology and its full acceptance. However, with the use of innovative techniques of fabrication, this can be overcome. This review is concluded with perspective recommendations that can be incorporated by researchers worldwide as a new problem statement for their work.
Collapse
|
3
|
Zhu F, Zheng YM, Zhang BG, Dai YR. A critical review on the electrospun nanofibrous membranes for the adsorption of heavy metals in water treatment. JOURNAL OF HAZARDOUS MATERIALS 2021; 401:123608. [PMID: 33113718 DOI: 10.1016/j.jhazmat.2020.123608] [Citation(s) in RCA: 88] [Impact Index Per Article: 29.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/09/2020] [Revised: 07/26/2020] [Accepted: 07/27/2020] [Indexed: 06/11/2023]
Abstract
Electrospun nanofibrous membranes (ENFMs) have many superior advantages, such as large specific surface area, high porosity, easy modification, good flexibility, and easy separation for recycling, which are consider as excellent adsorbents. In this paper, the research progress in the adsorption of heavy metals in water treatment by ENFMs is reviewed. Three types of ENFMs, including organic polymer ENFMs, organic polymer/inorganic material composite ENFMs and inorganic ENFMs are summarized, and their adsorption capacities for heavy metals in water are compared. The adsorption selectivity and capacity of ENFMs for heavy metals are depended largely on the type and number of functional groups on the surface of membranes, and usually the more the functional groups, the higher the adsorption capacity. The adsorption mechanisms of ENFMs are also mainly determined by the type of functional groups on the membrane. At present, the main challenge is to achieve the mass production of high-quality nanofibers and their actual application in the treatment of heavy metal-containing wastewater. Therefore, more consideration should be focused on the improvement of stability, mechanical strength and reusability of ENFMs. This review may provide an insight for the development of ENFMs-based adsorbents for heavy metals separation and water purification in the future.
Collapse
Affiliation(s)
- Fan Zhu
- School of Water Resources and Environment, Beijing Key Laboratory of Water Resources & Environmental Engineering, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing 100083, China.
| | - Yu-Ming Zheng
- CAS Key Laboratory of Urban Pollutant Conversion, Institute of Urban Environment, Chinese Academy of Sciences, 1799 Jimei Road, Xiamen 361021, China.
| | - Bao-Gang Zhang
- School of Water Resources and Environment, Beijing Key Laboratory of Water Resources & Environmental Engineering, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing 100083, China.
| | - Yun-Rong Dai
- School of Water Resources and Environment, Beijing Key Laboratory of Water Resources & Environmental Engineering, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing 100083, China.
| |
Collapse
|
4
|
Nafti Mateur M, Gonzalez Ortiz D, Jellouli Ennigrou D, Horchani-Naifer K, Bechelany M, Miele P, Pochat-Bohatier C. Porous Gelatin Membranes Obtained from Pickering Emulsions Stabilized with h-BNNS: Application for Polyelectrolyte-Enhanced Ultrafiltration. MEMBRANES 2020; 10:membranes10070144. [PMID: 32646064 PMCID: PMC7408420 DOI: 10.3390/membranes10070144] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/12/2020] [Revised: 06/30/2020] [Accepted: 07/06/2020] [Indexed: 11/16/2022]
Abstract
In recent years, numerous studies have been conducted to develop biopolymer-based membranes, highlighting the challenges to prepare porous structures with control porosity. In this paper an innovative method that relies on the generation of Pickering emulsions was developed to prepare porous membranes from gelatin for filtration purpose. Hexagonal boron nitride nanosheets (h-BNNS) were used to stabilize micro-droplets of castor oil in a continuous homogeneous gelatin solution. Two steps in the membrane preparation process strongly influenced the porous structure. Specifically, the duration of the drying time after emulsion casting and the duration of the cross-linking step affected membrane pore size, hydrophobicity, water swelling, and water permeability. By controlling these two steps, membranes could be designed with pore size between 0.39 and 1.60 μm and display pure water permeability between 150 and 506 L h−1 m−2 bar−1. These membranes have been tested for complexation–ultrafiltration experiments in which iron ions were removed from aqueous solutions with/without poly (acrylic acid) (PAA). Without PAA, the removal of free iron (II) ions was low (not more than 14%). The addition of PAA (200 ppm) allowed obtaining high removal rates (97%) at pH ≥ 5 with 3 bars of transmembrane pressure.
Collapse
Affiliation(s)
- Molka Nafti Mateur
- Institut Européen des Membranes, IEM UMR 5635, Université de Montpellier, CNRS, ENSCM, Place Eugene Bataillon, 34095 Montpellier, France; (M.N.M.); (D.G.O.); (M.B.); (P.M.)
- Physico-Chemical Laboratory of Mineral Materials and their Applications, National Center for Research in Materials Sciences, BP 73, 8027 Soliman, Tunisia; (D.J.E.); (K.H.-N.)
| | - Danae Gonzalez Ortiz
- Institut Européen des Membranes, IEM UMR 5635, Université de Montpellier, CNRS, ENSCM, Place Eugene Bataillon, 34095 Montpellier, France; (M.N.M.); (D.G.O.); (M.B.); (P.M.)
| | - Dorra Jellouli Ennigrou
- Physico-Chemical Laboratory of Mineral Materials and their Applications, National Center for Research in Materials Sciences, BP 73, 8027 Soliman, Tunisia; (D.J.E.); (K.H.-N.)
| | - Karima Horchani-Naifer
- Physico-Chemical Laboratory of Mineral Materials and their Applications, National Center for Research in Materials Sciences, BP 73, 8027 Soliman, Tunisia; (D.J.E.); (K.H.-N.)
| | - Mikhael Bechelany
- Institut Européen des Membranes, IEM UMR 5635, Université de Montpellier, CNRS, ENSCM, Place Eugene Bataillon, 34095 Montpellier, France; (M.N.M.); (D.G.O.); (M.B.); (P.M.)
| | - Philippe Miele
- Institut Européen des Membranes, IEM UMR 5635, Université de Montpellier, CNRS, ENSCM, Place Eugene Bataillon, 34095 Montpellier, France; (M.N.M.); (D.G.O.); (M.B.); (P.M.)
- Institut Universitaire de France, IUF, 1 Rue Descartes, CEDEX 5, 75231 Paris, France
| | - Céline Pochat-Bohatier
- Institut Européen des Membranes, IEM UMR 5635, Université de Montpellier, CNRS, ENSCM, Place Eugene Bataillon, 34095 Montpellier, France; (M.N.M.); (D.G.O.); (M.B.); (P.M.)
- Correspondence: ; Tel.: +33-467-143-327
| |
Collapse
|
5
|
Le HS, Qiu YR. Selective separation of Cd(II), Zn(II) and Pb(II) from Pb-Zn smelter wastewater via shear induced dissociation coupling with ultrafiltration. KOREAN J CHEM ENG 2020. [DOI: 10.1007/s11814-020-0509-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
6
|
|
7
|
|
8
|
Lin Y, Cai Y, Drioli E, Fan Y. Enhancing mechanical and photocatalytic performances on TiO2/Ti composite ultrafiltration membranes via Ag doping method. Sep Purif Technol 2015. [DOI: 10.1016/j.seppur.2015.02.024] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
9
|
Desai KR, Murthy ZVP. Removal of Ag(I) and Cr(VI) by Complexation-Ultrafiltration and Characterization of the Membrane by CFSK Model. SEP SCI TECHNOL 2014. [DOI: 10.1080/01496395.2012.690486] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
10
|
Zeng J, Guo Q, Ou-Yang Z, Zhou H, Chen H. Chromium(VI) removal from aqueous solutions by polyelectrolyte-enhanced ultrafiltration with polyquaternium. ASIA-PAC J CHEM ENG 2013. [DOI: 10.1002/apj.1764] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Jianxian Zeng
- School of Chemistry and Chemical Engineering; Hunan University of Science and Technology, Key Laboratory of Theoretical Chemistry and Molecular Simulation of Ministry of Education, Hunan Province College Key Laboratory of QSAR/QSPR; Xiangtan 411201 China
| | - Qiannan Guo
- School of Chemistry and Chemical Engineering; Hunan University of Science and Technology, Key Laboratory of Theoretical Chemistry and Molecular Simulation of Ministry of Education, Hunan Province College Key Laboratory of QSAR/QSPR; Xiangtan 411201 China
| | - Zhenzhong Ou-Yang
- School of Chemistry and Chemical Engineering; Hunan University of Science and Technology, Key Laboratory of Theoretical Chemistry and Molecular Simulation of Ministry of Education, Hunan Province College Key Laboratory of QSAR/QSPR; Xiangtan 411201 China
- Changsha Environmental Protection College; Changsha 410004 China
| | - Hu Zhou
- School of Chemistry and Chemical Engineering; Hunan University of Science and Technology, Key Laboratory of Theoretical Chemistry and Molecular Simulation of Ministry of Education, Hunan Province College Key Laboratory of QSAR/QSPR; Xiangtan 411201 China
| | - Huajun Chen
- School of Chemistry and Chemical Engineering; Hunan University of Science and Technology, Key Laboratory of Theoretical Chemistry and Molecular Simulation of Ministry of Education, Hunan Province College Key Laboratory of QSAR/QSPR; Xiangtan 411201 China
| |
Collapse
|
11
|
Llanos J, Rodrigo MA, Pérez A, Cañizares P. Treatment of Cu/Zn wastes by combined PSU-electrodeposition processes. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2013; 116:181-185. [PMID: 23313862 DOI: 10.1016/j.jenvman.2012.11.041] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2012] [Revised: 11/14/2012] [Accepted: 11/26/2012] [Indexed: 06/01/2023]
Abstract
This work is focused on the study of the electrodeposition stage of a combined polymer-supported ultrafiltration (PSU)-electrodeposition process for the recovery and selective separation of Cu/Zn mixtures. With this aim, the electrodeposition of Cu/Zn mixtures was evaluated in the presence of ethoxylated polyethylenimine, a polymer that has exhibited good performance in PSU processes in previous studies and whose performance has been fully characterised in the literature. It was determined that at pH values equal to or less than 4, macromolecular complexes formed with both Cu and Zn are weak and electrodeposition can take place very efficiently, with the deposition of copper being strongly favoured. For values of the applied electrical charge equal or greater than 0.1 A h dm(-3), the purity of the copper deposit is greater than 99% for the range of Cu/Zn molar ratios between 1 and infinity. Next, long-term experiments in continuous mode showed that the average deposition rate was close to the maximum rate achieved when operating in discontinuous mode and that the electrodeposition process does not negatively affect the performance of the polymer in the PSU processes.
Collapse
Affiliation(s)
- Javier Llanos
- Chemical Engineering Department, University of Castilla-La Mancha, Edificio Enrique Costa Novella, Campus Universitario s/n, 13005 Ciudad Real, Spain.
| | | | | | | |
Collapse
|
12
|
Patil PN, Marathe KV. Selective Separation of Nickel (II) and Cobalt (II) from Waste Water by Using Continuous Cross-Flow Micellar Enhanced Ultrafiltration with Addition of Chelating Agent. SEP SCI TECHNOL 2013. [DOI: 10.1080/01496395.2012.690485] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
13
|
Recovery of Tungsten (VI) from Aqueous Solutions by Complexation-ultrafiltration Process with the Help of Polyquaternium. Chin J Chem Eng 2012. [DOI: 10.1016/s1004-9541(12)60406-6] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
14
|
Zeng J, He Q, Zhou H, Sun X, Zhang J. Recovery of cerium(III) from aqueous solutions by complexation-ultrafiltration process. ASIA-PAC J CHEM ENG 2012. [DOI: 10.1002/apj.1617] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Jianxian Zeng
- College of Chemistry and Chemical Engineering; Hunan University of Science and Technology; Xiangtan; 411201; China
| | - Qincheng He
- College of Chemistry and Chemical Engineering; Hunan University of Science and Technology; Xiangtan; 411201; China
| | - Hu Zhou
- College of Chemistry and Chemical Engineering; Hunan University of Science and Technology; Xiangtan; 411201; China
| | - Xiahui Sun
- College of Chemistry and Chemical Engineering; Hunan University of Science and Technology; Xiangtan; 411201; China
| | - Jiaojiao Zhang
- College of Chemistry and Chemical Engineering; Hunan University of Science and Technology; Xiangtan; 411201; China
| |
Collapse
|
15
|
Zeng J, Li S, Sun X, Chen X. Application of Polyelectrolyte-Enhanced Ultrafiltration for Rhenium Recovery from Aqueous Solutions. Chem Eng Technol 2012. [DOI: 10.1002/ceat.201100454] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
16
|
Zong C, Ai K, Zhang G, Li H, Lu L. Dual-emission fluorescent silica nanoparticle-based probe for ultrasensitive detection of Cu2+. Anal Chem 2011; 83:3126-32. [PMID: 21425862 DOI: 10.1021/ac2001324] [Citation(s) in RCA: 223] [Impact Index Per Article: 17.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Abstract
An effective dual-emission fluorescent silica nanoparticle-based probe has been constructed for rapid and ultrasensitive detection of Cu(2+). In this nanoprobe, a dye-doped silica core served as a reference signal, thus providing a built-in correction for environmental effects. A response dye was covalently grafted on the surface of the silica nanoparticles through a chelating reagent for Cu(2+). The fluorescence of the response dye could be selectively quenched in the presence of Cu(2+), accompanied by a visual orange-to-green color switch of the nanoprobe. The nanoprobe provided an effective platform for reliable detection of Cu(2+) with a detection limit as low as 10 nM, which is nearly 2 × 10(3) times lower than the maximum level (∼20 μM) of Cu(2+) in drinking water permitted by the U.S. Environmental Protection Agency (EPA). The high sensitivity was attributed to the strong chelation of Cu(2+) with polyethyleneimine (PEI) and a signal amplification effect. The nanoprobe constructed by this method was very stable, enabling the rapid detection of Cu(2+) in real water samples. Good linear correlations were obtained over the concentration range from 1 × 10(-7) to 8 × 10(-7) (R(2) = 0.99) with recoveries of 103.8-99.14% and 95.5-95.14% for industrial wastewater and lake water, respectively. Additionally, the long-wavelength emission of the response dye can avoid the interference of the autofluorescence of the biosystems, which facilitated their applications in monitoring Cu(2+) in cells. Furthermore, the nanoprobe showed a good reversibility; the fluorescence can be switched "off" and "on" by an addition of Cu(2+) and EDTA, respectively.
Collapse
Affiliation(s)
- Chenghua Zong
- State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 5625 Renmin Street, Changchun, 130022, People's Republic of China
| | | | | | | | | |
Collapse
|