Improving lignin removal from pre-hydrolysis liquor by horseradish peroxidase-catalyzed polymerization

N, S/P co-doped hemicellulose-based carbon dots with tunable fluorescence for anti-counterfeiting

Based on the status quo of high energy consumption and low utilization of nonfibrous components in traditional pulp and paper industry, a sustainable and facile approach was proceeded to realize the high-value utilization of hemicelluloses from papermaking waste liquor. The hemicellulose waste produced by ethanol precipitation in pre-hydrolysis liquor (PHL), was directly used to fabricate carbon dots (CDs) via a hydrothermal method. The hydrothermal carbonization and heteroatoms doping contributed to the sp2 conjugated domains and surface defect states of CDs, thus creating the bright blue (N-CDs), deep cyan (N/S-CDs), and light cyan (N/P-CDs) fluorescence under UV radiation. The XPS analysis and density functional theory (DFT) calculations demonstrated that the large sp2 conjugated system and the synergistic effect of CO, N-(C)3, CS, and PO groups promoted the narrow of band gap and the red-shift of fluorescence emission. Importantly, the prepared CDs grew in situ on cotton fibers, showed excellent fluorescent performance. The obtained CDs could be also utilized to prepare anti-counterfeiting film and ink due to their excellent optical features, verifying the great potential application as security material. The feasible strategy of the high-value conversion of biomass waste opens a window of opportunity for the practical anti-counterfeiting utilizations.

A Novel and Effective Recyclable BiOCl/BiOBr Photocatalysis for Lignin Removal from Pre-Hydrolysis Liquor

The presence of lignin hampers the utilization of hemicelluloses in the pre-hydrolysis liquor (PHL) from the kraft-based dissolving pulp production process. In this paper, a novel process for removing lignin from PHL was proposed by effectively recycling catalysts of BiOCl/BiOBr. During the whole process, BiOCl and BiOBr were not only adsorbents for removing lignin, but also photocatalysts for degrading lignin. The results showed that BiOCl and BiOBr treatments caused 36.3% and 33.9% lignin removal, respectively, at the optimized conditions, and the losses of hemicellulose-derived saccharides (HDS) were both 0.1%. The catalysts could be regenerated by simple photocatalytic treatment and obtain considerable CO and CO2. After 15 h of illumination, 49.9 μmol CO and 553.0 μmol CO2 were produced by BiOCl, and 38.7 μmol CO and 484.3 μmol CO2 were produced by BiOBr. Therefore, both BiOCl and BiOBr exhibit excellent adsorption and photocatalytic properties for lignin removal from pre-hydrolysis.

Enhancement of lignin removal from pre-hydrolysis liquor for saccharide recovery via horseradish peroxidase treatment in the presence of Ca2

The removal of lignin is important to the recovery of saccharides from the pre-hydrolysis liquor (PHL) in kraft-based dissolved pulp production. A one-step process for lignin removal from PHL via treatment with horseradish peroxidase (HRP) in the presence of Ca²⁺ was proposed, and its principle was studied. The results demonstrated synergy between HRP and Ca²⁺ in lignin removal from PHL, whereas NH₄⁺ had little effect on lignin removal. HRP treatment in the presence of 60 mmol/L of Ca²⁺ resulted in a lignin removal of 64.8% accompanied by a saccharide loss of 14.2%. HRP catalyzed both the polymerization and depolymerization of the lignin in the PHL. The HRP-catalyzed lignin polymerization rendered some lignin insoluble enabling it to be directly removed. The HRP-catalyzed depolymerization of lignin decreased its molecular weight with an evident increase in its carboxyl content. The insoluble complexes formed between the lignin with carboxyl and the Ca²⁺ facilitated the removal of the depolymerized lignin.

Total utilization of lignin and carbohydrates in Eucalyptus grandis: an integrated biorefinery strategy towards phenolics, levulinic acid, and furfural

BACKGROUND

Lignocellulosic biomass, which is composed of cellulose, hemicellulose and lignin, represents the most abundant renewable carbon source with significant potential for the production of sustainable chemicals and fuels. Current biorefineries focus on cellulose and hemicellulose valorization, whereas lignin is treated as a waste product and is burned to supply energy to the biorefineries. The depolymerization of lignin into well-defined mono-aromatic chemicals suitable for downstream processing is recognized increasingly as an important starting point for lignin valorization. In this study, conversion of all three components of Eucalyptus grandis into the corresponding monomeric chemicals was investigated using solid and acidic catalyst in sequence.

RESULTS

Lignin was depolymerized into well-defined monomeric phenols in the first step using a Pd/C catalyst. The maximum phenolic monomers yield of 49.8 wt% was achieved at 240 °C for 4 h under 30 atm H₂. In the monomers, 4-propanol guaiacol (12.9 wt%) and 4-propanol syringol (31.9 wt%) were identified as the two major phenolic products with 90% selectivity. High retention of cellulose and hemicellulose pulp was also obtained, which was treated with FeCl₃ catalyst to attain 5-hydroxymethylfurfural, levulinic acid and furfural simultaneously. The optimal reaction condition for the co-conversion of hemicellulose and cellulose was established as 190 °C and 100 min, from which furfural and levulinic acid were obtained in 55.9% and 73.6% yields, respectively. Ultimately, 54% of Eucalyptus sawdust can be converted into well-defined chemicals under such an integrated biorefinery method.

CONCLUSIONS

A two-step process (reductive catalytic fractionation followed by FeCl₃ catalysis) allows the fractionation of all the three biopolymers (cellulose, hemicellulose, and lignin) in Eucalyptus biomass, which provides a promising strategy to make high-value chemicals from sustainable biomass.