Modification of nZVI with a bio-conjugate containing amine and carbonyl functional groups for catalytic activation of persulfate

Development of persulfate-based advanced oxidation processes to remove synthetic azo dyes from aqueous matrices

Azo dyes are largely used in many industries and discharged in large volumes of their effluents into the aquatic environment giving rise to non-esthetic pollution and health-risk problems. Due to the high stability of azo dyes in ambient conditions, they cannot be abated in conventional wastewater treatment plants. Over the last fifteen years, the decontamination of dyeing effluents by persulfate (PS)-based advanced oxidation processes (AOPs) has received a great attention. In these methods, PS is activated to be decomposed into sulfate radical anion (SO4•-), which is further partially hydrolyzed to hydroxyl radical (•OH). Superoxide ion (O2•-) and singlet oxygen (1O2) can also be produced as oxidants. This review summarizes the results reported for the discoloration and mineralization of synthetic and real waters contaminated with azo dyes covering up to November 2023. PS activation with iron, non-iron transition metals, and carbonaceous materials catalysts, heat, UVC light, photocatalysis, photodegradation with iron, electrochemical and related processes, microwaves, ozonation, ultrasounds, and other processes is detailed and analyzed. The principles and characteristics of each method are explained with special attention to the operating variables, the different oxidizing species generated yielding radical and non-radical mechanisms, the addition of inorganic anions and natural organic matter, the aqueous matrix, and the by-products identified. Finally, the overall loss of toxicity or partial detoxification of treated azo dye solutions during the PS-based AOPs is discussed.

A walnut shell biochar-nano zero-valent iron composite membrane for the degradation of carbamazepine via persulfate activation

In this study, novel walnut shell biochar-nano zero-valent iron nanocomposites (WSBC-nZVI) were synthesized using a combined pyrolysis/reduction process. WSBC-nZVI displayed a high removal efficiency (86 %) for carbamazepine (CBZ) compared with walnut shell biochar (70 %) and nano zero-valent iron (76 %) in the presence of persulfate (PS) (0.5 g/L catalyst, 10 mg/L CBZ, 1 mM persulfate). Subsequently, WSBC-nZVI was applied for the fabrication of the membrane using a phase inversion method. The membrane demonstrated an excellent removal efficiency of 91 % for CBZ in a dead-end system (2 mg/L CBZ, 1 mM persulfate). In addition, the effect of various operating conditions on the degradation efficiency in the membrane/persulfate system was investigated. The optimum pH was close to neutral, and an increase in CBZ concentration from 1 mg/L to 10 mg/L led to a drop in removal efficiency from 100 % to 24 %. The degradation mechanisms indicated that oxidative species, including 1O2, OH, SO4-, and O2-, all contribute to the degradation of CBZ, while the role of 1O2 is highlighted. The CBZ degradation products were also investigated, and the possible pathways and the predicted toxicity of intermediates were proposed. Furthermore, the practical use of the membrane was validated by the treatment of real wastewater.

Recent Advances in Nanoscale Zero-Valent Iron (nZVI)-Based Advanced Oxidation Processes (AOPs): Applications, Mechanisms, and Future Prospects

The fast rise of organic pollution has posed severe health risks to human beings and toxic issues to ecosystems. Proper disposal toward these organic contaminants is significant to maintain a green and sustainable development. Among various techniques for environmental remediation, advanced oxidation processes (AOPs) can non-selectively oxidize and mineralize organic contaminants into CO2, H2O, and inorganic salts using free radicals that are generated from the activation of oxidants, such as persulfate, H2O2, O2, peracetic acid, periodate, percarbonate, etc., while the activation of oxidants using catalysts via Fenton-type reactions is crucial for the production of reactive oxygen species (ROS), i.e., •OH, •SO4-, •O2-, •O3CCH3, •O2CCH3, •IO3, •CO3-, and 1O2. Nanoscale zero-valent iron (nZVI), with a core of Fe0 that performs a sustained activation effect in AOPs by gradually releasing ferrous ions, has been demonstrated as a cost-effective, high reactivity, easy recovery, easy recycling, and environmentally friendly heterogeneous catalyst of AOPs. The combination of nZVI and AOPs, providing an appropriate way for the complete degradation of organic pollutants via indiscriminate oxidation of ROS, is emerging as an important technique for environmental remediation and has received considerable attention in the last decade. The following review comprises a short survey of the most recent reports in the applications of nZVI participating AOPs, their mechanisms, and future prospects. It contains six sections, an introduction into the theme, applications of persulfate, hydrogen peroxide, oxygen, and other oxidants-based AOPs catalyzed with nZVI, and conclusions about the reported research with perspectives for future developments. Elucidation of the applications and mechanisms of nZVI-based AOPs with various oxidants may not only pave the way to more affordable AOP protocols, but may also promote exploration and fabrication of more effective and sustainable nZVI materials applicable in practical applications.

UV-activated persulfates oxidation of anthraquinone dye: Kinetics and ecotoxicological assessment

Sulfate radical-based advanced oxidation processes (SR-AOPs) are gaining popularity as a feasible alternative for removing recalcitrant pollutants in an aqueous environment. Persulfates, namely peroxydisulfate (PDS) and peroxymonosulfate (PMS) are the most common sulfate radical donors. Persulfates activation by ultraviolet (UV) irradiation is considered feasible due to the high concentration of radicals produced as well as the lack of catalysts leaching. The research focuses on determining the impact of activated PDS and PMS on the degradation of anthraquinone dye, i.e., Acid Blue 129 (AB129). UV-activated PDS and PMS can quickly degrade the AB129 as well as restrict the formation of by-products. This could explain the reduced ecotoxicity levels of the treated water after degradation, using an aquatic plant (Lemna minor) and a crustacean (Daphnia magna). This, on the other hand, can ensure that the sulfate radical-based processes can be an environmentally friendly technology.

Morphology regulation of zero-valent iron nanosheets supported on microsilica for promoting peroxymonosulfate activation

Combing the assisted dispersion strategy of support with the wet chemical reduction method, a novel nano-zero valent iron/microsilica (nZVI/M) composite was successfully fabricated, where the 2D nZVI nanosheets were uniformly anchored and covered on the surface of microsilica. The introduction of microsilica notably relieved the agglomeration effect of nZVI nanosheets, which induced the improvement of specific surface area (45.68 m²/g) and pore volume (0.172 cm³/g), and thereby exposing more active sites for bisphenol A (BPA) removal. The optimized nZVI/M-0.6 displayed the superior catalytic performance in the presence of peroxymonosulfate (PMS) with the degradation rate of BPA reached above 97% within 3 min and a higher constant rate of 0.659 min^-1, which was approximately 3.9 times as high as that of nZVI/PMS system. The homogeneously dispersion of nZVI nanosheets on microsilica benefited for the assembly of the pollutants and boosting the kinetics of the catalytic degradation process. As a highly efficient PMS activator, it could well maintain the catalytic activity in different real water samples. The quenching experiments verified that SO₄^•- played the dominate role for BPA removal. This work offered novel insights for designing and preparing iron-based persulfate activator for wastewater treatment.

Bioaccumulation of Trace Elements from Aqueous Solutions by Selected Terrestrial Moss Species

The interrelationship between metal concentrations in mosses and their surroundings prompts research toward examining their accumulation properties, as it is particularly important for their usage in biomonitoring studies that use mosses. In this study, the kinetics of elemental sorption in three moss species (Pleurozium schreberi, Dicranum polysetum, and Sphagnum fallax) were investigated under laboratory conditions. Sorption from metal salt solutions was carried out under static conditions with decreasing elemental concentration. Functional groups responsible for binding metal cations to the internal structures of the mosses were also identified. It was shown that the equilibrium state was reached after about 60 min. Under the conditions of the experiment, in the first 10 min of the process, about 70.4-95.3% of metal ions were sorbed from the solution into the moss gametophytes by P. schreberi (57.1-89.0% by D. polysetum and 54.1-84.5% by S. fallax) with respect to the concentration of this analyte accumulated in the mosses at equilibrium. It can be assumed that the exposure of mosses with little contamination by heavy metals in an urbanized area under active biomonitoring will cause an increase in the concentration of these analytes in proportion to their concentration in atmospheric aerosols. In the case of P. schreberi and D. polysetum, the O-H/N-H band was enormously affected by the adsorption process. On the other hand, FTIR (Fourier transform infrared spectroscopy) analysis of S. fallax after adsorption showed slight changes for most of the bands analyzed. Based on this study, it can be concluded that mosses can be used as, for example, a biomonitor in monitoring of urban ecosystems, but also in the phytoremediation of surface waters.

Activation of Peroxydisulfate by Bimetallic Nano Zero-Valent Iron for Waste-Activated Sludge Disintegration

Waste-activated sludge (WAS) disintegration using peroxydisulfate (PDS) has attracted scientific attention over the past few years. Despite several advantages offered by a sulfate radical-advanced oxidation process, there are still too many downsides of this treatment that limit its facile large-scale application. This study investigated whether modifying nano zero-valent iron (nZVI) with a second metal such as Ag and Cu enhanced the disruption of WAS. The disintegration efficiency was assessed using standard techniques, i.e., soluble chemical oxygen demand, Fourier-transform infrared spectroscopy and a scanning electron microscope. The bimetallics were shown to have an improved disintegration efficiency of > 2.5-fold compared with the untreated sample. Furthermore, nZVI/Ag was found to be more efficient than nZVI/Cu for PDS activation, which was validated by the higher ratio (3 and 2.5 for nZVI/Ag and nZVI/Cu, respectively) between the soluble extracellular polymeric substances and the bound extracellular polymeric substances (S-EPS/B-EPS). Similar conclusions were derived from a SEM analysis. The improved disintegration efficiency could be related to the enhanced electron transfer from nZVI to PDS or the intrinsic properties of silver, which was found to be one of the best activators for PDS under homogeneous conditions. We believe that this study deepens the understanding of PDS heterogeneous activation processes.

Effective degradation of Direct Red 81 using FeS-activated persulfate process

As a burgeoning advanced oxidation process (AOP), heterogeneous activation of persulfate (PS) for synthetic refractory contaminants decontamination has recently received much attention. In this study, FeS was selected as a heterogeneous PS activator to facilitate the degradation of a typical recalcitrant contaminant of diazo dye Direct Red 81 (DR 81). The results showed that approximately 95% of 0.03 mM DR 81 was removed within 60 min with FeS and PS doses of 1.5 × 10^-3 M. The efficient decomposition of DR 81 by the FeS/PS system was assumed to be mainly attributed to the highly reactive SO₄^-• and •OH, which was related to PS cleavage by both dissolved Fe²⁺ leached from FeS and Fe²⁺ bound on the FeS surface. Except for strongly alkaline conditions, DR 81 decolorations by FeS/PS were insignificantly affected by operational parameters such as temperature, initial solution pH, and rotate speed. Meanwhile, the presence of five inorganic anions being studied had distinct impacts on DR 81 degradation and followed a strict order of NO₃^- < Cl^- < SO₄^2- < CO₃^2- < PO₄^3-. However, FeS/PS system was highly adaptable, and FeS, which is used as a PS activator was more stable. GC/MS and TOC data revealed that thorough mineralization of DR 81 by PS/FeS in an initial fast reaction phase to transform DR 81 to aromatic intermediates, followed by a slow reaction phase that mineralized these organic intermediates into carboxylic acids and carbon dioxide through further oxidation.

Enhanced degradation of sulfamethoxazole by a modified nano zero-valent iron with a β-cyclodextrin polymer: Mechanism and toxicity evaluation

Rising concern about emerging and already persisting pollutants in water has urged the scientific community to develop novel remedial techniques. A new group of remediation methods is based on the modification of nanoscale zero-valent iron particles (nZVI), which are well known for treating volatile organic compounds and heavy metals. The properties of nZVI may be further enhanced by modifying their structure or surface using "green" polymers. Herein, nZVI was modified by a β-cyclodextrin polymer (β-CDP), which is considered an environmentally safe and inexpensive adsorbent of contaminants. This composite was used for the first time for the degradation of sulfamethoxazole (SMX). Coating by β-CDP not only enhanced the degradation of SMX (>95%, under 10 min) by the nanoparticles in a wide pH range (3-9) and enabled their efficient reusability (for three cycles) but also made the coated nZVI less toxic to the model bioindicator microalga Raphidocelis subcapitata. Moreover, degradation products of SMX were found to be less toxic to Escherichia coli bacteria and R. subcapitata microalga, contrary to the SMX antibiotic itself, indicating a simple and eco-friendly cleaning process. This research aims to further stimulate and develop novel remedial techniques based on nZVI, and provides a potential application in the degradation of antibiotics in a wide pH range. Moreover, the wealth of available cyclodextrin materials used for surface modification may open a way to discover more efficient and attractive composites for environmental applications.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.

Influence of catalyst zeta potential on the activation of persulfate

The effect of the zeta potential of nano zero-valent iron (nZVI) and carbocatalyst on the activation of persulfate was investigated. The oxidation experiments were performed on three different compounds, with variously modified nZVI and three distinct carbocatalysts. From the obtained results, an evident linear correlation between nanoparticles' zeta potential and reaction rate constants of these three compounds oxidation may be observed. This phenomenon is not mechanism-specific and occurs for the radical and non-radical processes. The present work indicates the critical influence of the surface charge of nZVI and carbocatalysts on the persulfate catalytic activation.