Role of different dimensional carbon nanoparticles in catalytic oxidation of organic pollutants and alleviating membrane fouling during ultrafiltration of surface water

Gradient purification of surface water and ultrafiltration membrane fouling mitigation based on Fe(VI) multifunctional integration characteristics: Is a sedimentation unit necessary?

Ferrate (Fe(VI)) can provide oxidation and in-situ coagulation/adsorption for the removal of emerging contaminants and natural organic matter, and can be used in conjunction with ultrafiltration (UF) membrane to enhance the removal of composite contaminants and mitigate UF membrane fouling. Based on the Fe(VI) multifunctional integration characteristics, the study objectively and comprehensively verified the gradient purification of surface water and the UF membrane fouling mitigation by Fe(VI)-UF and sulfite (S(IV)) activated Fe(VI) (S(IV)/Fe(VI))-UF, elucidated the effect of sedimentation unit on the UF mechanism and the membrane fouling behaviors, and revealed the free energy changes throughout the UF process. The experimental results demonstrated that S(IV)/Fe(VI)-UF showed superior purification performance and UF membrane fouling mitigation than Fe(VI)-UF. S(IV)/Fe(VI)-UF achieved removals of sulfamethoxazole, DOC, and UV254 up to 77.73 %, 61.86 %, and 86.33 %, and was able to significantly mitigate UF membrane fouling by prolonging the transition stage and positively shifting the interfacial free energy. Innovatively, the absence of a sedimentation unit was found to adversely affect the initial stages of Fe(VI)-UF and S(IV)/Fe(VI)-UF by lowering the energy barriers, while negligibly affecting cake filtration. Additionally, the water treatment cost of S(IV)/Fe(VI) was 0.3 yuan per ton, indicating notable economic benefits and engineering potential. While deepening the understanding of Fe(VI) multifunctional integration characteristics, the above results provided theoretical and data support for S(IV)/Fe(VI)-UF and Fe(VI)-UF treatment of surface water, and enriched the application scenarios of Fe(VI)-related technologies.

Effect of peroxydisulfate activated by B-doped NiFe2Ox for degrading contaminants and mitigating nanofiltration membrane fouling in the landfill leachate treatment

Catalytic oxidation pretreatment is a significant focus in the field of membrane fouling control; however, traditional catalytic materials are plagued by limitations in catalytic sites and challenges in recovery. In this study, a novel catalyst, B-doped NiFe2Ox, was prepared with magnetic recovery capabilities and abundant oxygen vacancies to address landfill leachate treatment and mitigate membrane fouling. The results demonstrated the efficient activation of persulfate (PS) by the catalytic sites on B-NiFe2Ox, which significantly degraded the complex organic pollutants like conjugated double bonds and aromatic compounds in landfill leachate. A large amount of humic acid and soluble microbial products in the landfill leachate were efficiently degraded upon contact with sulfate and hydroxyl radicals produced by B-NiFe2Ox/PS, thereby resulting in achieving a chemical oxygen demand removal efficiency of up to 72 % and more than a twofold enhancement in filtration flux. Moreover, the characteristics of the fouled layer reveal that the B-NiFe2Ox/PS system facilitated the formation of a porous cake layer, maximizing the retention of functional groups on the NF270 membrane surface. Notably, a minor presence of B-NiFe2Ox is uniformly distributed within the cake layer, indicating the in-situ occurrence of weak catalytic oxidation reactions. This study provides an effective and innovative approach utilizing catalytic oxidation for membrane fouling control.

Fouling and Chemical Cleaning Strategies for Submerged Ultrafiltration Membrane: Synchronized Bench-Scale, Full-Scale, and Engineering Tests

This study investigated membrane fouling issues associated with the operation of a submerged ultrafiltration membrane in a drinking water treatment plant (DWTP) and optimized the associated chemical cleaning strategies. By analyzing the surface components of the membrane foulant and the compositions of the membrane cleaning solution, the primary causes of membrane fouling were identified. Membrane fouling control strategies suitable for the DWTP were evaluated through chemical cleaning tests conducted for bench-scale, full-scale, and engineering cases. The results show that the membrane foulants were primarily composed of a mixture of inorganics and organics; the inorganics were mainly composed of Al and Si, while the organics were primarily humic acid (HA). Sodium citrate proved to be the most effective cleaning agent for inorganic fouling, which was mainly composed of Al, whereas sodium hypochlorite (NaClO) combined with sodium hydroxide (NaOH) showed the best removal efficiency for organic fouling, which predominantly consisted of HA and Si. However, sodium hypochlorite (NaClO) combined with sodium hydroxide (NaOH) showed the best removal efficiency for organic fouling and Si; organic fouling predominantly consisted of HA. Based on the bench-scale test results, flux recovery was verified in the full-scale system. Under a constant pressure of 30 kPa, the combined acid-alkali cleaning achieved the best flux recovery, restoring the flux from 22.8 L/(m2·h) to 66.75 L/(m2·h). In the engineering tests, combined acid-alkali cleaning yielded results consistent with those of the full-scale tests. In the practical engineering cleaning process, adopting a cleaning strategy of alkaline (NaClO + NaOH) cleaning followed by acidic (sodium citrate) cleaning can effectively solve the membrane fouling problem.

Nano-confined catalysis with Co nanoparticles-encapsulated carbon nanotubes for enhanced peroxymonosulfate oxidation in secondary effluent treatment: Water quality improvement and membrane fouling alleviation

Despite widespread deployment and investigation of ultrafiltration (UF) for secondary effluent purification, the challenge of membrane fouling due to effluent organic matter (EfOM) remains formidable. This study introduced a novel pretreatment method utilizing Co nanoparticles-encapsulated carbon nanotubes activated peroxymonosulfate (Co@CNT/PMS) to degrade EfOM and mitigate membrane fouling. Characterization of Co@CNT revealed the efficient encapsulation of Co nanoparticles within nanotubes, which notably enhanced the catalytic degradation of bisphenol A and typical organics. The tube-encapsulated structure increased the concentration of reactive species within the confined nanoscopic space, thereby improving the probability of collisions with pollutants and promoting their degradation. The Co@CNT/PMS pretreatment led to substantial reductions in aromatic compounds, fluorescent components, and both high and middle molecular weight substances. These changes proved crucial in diminishing the fouling potential in subsequent UF processes, where reversible and irreversible fouling resistances decreased by 97.1 % and 72.8 %, respectively. The transition volume from pore blocking to cake filtration markedly increased, prolonging the formation of a dense fouling layer. Surface properties analysis indicated a significant reduction of pollutants on membrane surfaces after the Co@CNT/PMS pretreatment. This study underscored the efficacy of confinement-based advanced oxidization pretreatment in enhancing UF performance, presenting a viable resolution to membrane fouling.

Nanoporous air filtering systems made from renewable sources: benefits and challenges

There is a crucial need for air purification systems due to increasing air contamination, while conventional air-filtering materials face challenges in eliminating gaseous and particulate pollutants. This review examines the development and characteristics of nanoporous polymeric materials developed from renewable resources, which have rapidly advanced in recent years. These materials offer more sustainable alternatives for nanoporous structures made out of conventional polymers and significantly impact the properties of porous polymers. The review explores nanoporous materials' production from renewable sources, filtering mechanisms, physicochemical makeup, and sensing capabilities. The recent advancements in this field aim to enhance production techniques, lower pressure drop, and improve adsorption efficiency. Currently, supporting approaches include using adsorbent layers and binders to immobilize nanoporous materials. Furthermore, the prospects and challenges of nanoporous materials obtained from renewable sources used for air purification are discussed.

New insights into Co3O4-carbon nanotube membrane for enhanced water purification: Regulated peroxymonosulfate activation mechanism via nanoconfinement

Co-based peroxymonosulfate (PMS) activation system with fascinating catalytic performance has become a promising technology for water purification, but it always suffers from insufficient mass transfer, less exposed active sites and toxic metal leaching. In this work, a carbon nanotube membrane confining Co3O4 inside (Co3O4-in-CNT) was prepared and was coupled with PMS activation (catalytic membrane process) for sulfamethoxazole (SMX) removal. Compared with counterpart with surface-loaded Co3O4 (Co3O4-out-CNT), the Co3O4-in-CNT catalytic membrane process exhibited enhanced SMX removal (99.5% vs. 89.1%) within residence time of 2.89 s, reduced Co leaching (20 vs. 147 μg L-1) and more interestingly, the nonradical-to-radical mechanism transformation (from 1O2 and electron transfer to SO4•- and •OH). These phenomena were ascribed to the nanoconfinement effect in CNT, which enhanced mass transfer (2.80 × 10-4 vs. 5.98 × 10-5 m s-1), accelerated Co3+/Co2+ cycling (73.4% vs. 65.0%) and showed higher adsorption energy for PMS (cleavage of O-O bond). Finally, based on the generated abundant reactive oxygen species (ROS), the seven degradation pathways of SMX were formed in system.

Using Fe(II)/Fe(VI) activated peracetic acid as pretreatment of ultrafiltration for secondary effluent treatment: Water quality improvement and membrane fouling mitigation

Ultrafiltration (UF) is a technology commonly used to treat secondary effluents in wastewater reuse; however, it faces two main challenges: 1) membrane fouling and 2) inadequate nitrogen (N), phosphorus (P), and organic micropollutants (OMPs) removal. To address these two issues, in this study, we applied peracetic acid (PAA), Fe(VI)/PAA, and Fe(II)/PAA as UF pretreatments. The results showed that the most effective pretreatment was Fe(II)/200 μM PAA, which reduced the total fouling resistance by 90.2%. In comparison, the reduction was only 29.7% with 200 μM PAA alone and 64.3% with Fe(VI)/200 μM PAA. Fe(II)/200 μM PAA could effectively remove fluorescent components and hydrophobic organics in effluent organic matter (EfOM), and enhance the repulsive force between foulants and membrane (according to XDLVO analysis), and consequently, mitigate pore blocking and delay cake layer formation. Regarding pollutant removal, Fe(II)/200 μM PAA effectively degraded OMPs (>85%) and improved P removal by 58.2% via in-situ Fe(Ⅲ) co-precipitation. The quencher and probe experiments indicated that FeIVO2+, •OH, and CH3C(O)OO•/CH3C(O)O• all played important roles in micropollutant degradation with Fe(II)/PAA. Interestingly, PAA oxidation produced highly biodegradable products such as acetic acid, which significantly elevated the BOD5 level and increased the BOD5/total nitrogen (BOD5/TN) ratio from 0.8 to 8.6, benefiting N removal with subsequent denitrification. Overall, the Fe(II)/PAA process exhibits great potential as a UF pretreatment to control membrane fouling and improve water quality during secondary effluent treatment.

UV/Fe(II)/S(IV) Pretreatment for Ultrafiltration of Microcystis aeruginosa-Laden Water: Fe(II)/Fe(III) Triggered Synergistic Oxidation and Coagulation

Ultrafiltration (UF) has been proven effective in removing algae during seasonal algal blooms, but the algal cells and the metabolites can induce severe membrane fouling, which undermines the performance and stability of the UF. Ultraviolet-activated sulfite with iron (UV/Fe(II)/S(IV)) could enable an oxidation-reduction coupling circulation and exert synergistic effects of moderate oxidation and coagulation, which would be highly preferred in fouling control. For the first time, the UV/Fe(II)/S(IV) was systematically investigated as a pretreatment of UF for treating Microcystis aeruginosa-laden water. The results showed that the UV/Fe(II)/S(IV) pretreatment significantly improved the removal of organic matter and alleviated membrane fouling. Specifically, the organic matter removal increased by 32.1% and 66.6% with UV/Fe(II)/S(IV) pretreatment for UF of extracellular organic matter (EOM) solution and algae-laden water, respectively, while the final normalized flux increased by 12.0-29.0%, and reversible fouling was mitigated by 35.3-72.5%. The oxysulfur radicals generated in the UV/S(IV) degraded the organic matter and ruptured the algal cells, and the low-molecular-weight organic matter generated in the oxidation penetrated the UF and deteriorated the effluent. The over-oxidation did not happen in the UV/Fe(II)/S(IV) pretreatment, which may be attributed to the cyclic redox Fe(II)/Fe(III) coagulation triggered by the Fe(II). The UV-activated sulfate radicals in the UV/Fe(II)/S(IV) enabled satisfactory organic removal and fouling control without over-oxidation and effluent deterioration. The UV/Fe(II)/S(IV) promoted the aggregation of algal foulants and postponed the shift of the fouling mechanisms from standard pore blocking to cake filtration. The UV/Fe(II)/S(IV) pretreatment proved effective in enhancing the UF for algae-laden water treatment.

Enhancing ultrafiltration of algal-rich water using ferrate activated with sodium percarbonate: Foulants variation, membrane fouling alleviation, and collaborative mechanism

Ultrafiltration (UF) is a reliable method to treat algal-rich water, whereas severe membrane fouling has impeded its actual application. To improve UF performance and alleviate membrane fouling resulted by algal foulants, a novel strategy coupling ferrate (Fe(VI)) and sodium percarbonate (SPC) was proposed. During the coupling process, Fe(VI) was activated by SPC to generate high-valent Fe intermediates (Fe(V) and Fe(IV)), which played a crucial role in high-efficiency oxidation for algal foulants, and the in-situ formed Fe(III) particles decomposed by Fe(VI) also enhanced the coagulation and adsorption capacity to the coupling system. Under the triple effects of coagulation, adsorption and oxidation, the algal foulants were efficiently eliminated. The zeta potential increased from -32.70 mV to -6.56 mV at most, the particle size was significantly enlarged, and the generated flocs possessed a great settleability. The morphology, viability, and integrity of algae cells were effectively maintained. The dissolved organic matters and fluorescent organics were efficiently removed, as well as macromolecular organics were reduced into lower molecular weight components. With the collaborative effect of Fe(VI) and SPC, the terminal specific flux was increased from 0.29 to 0.92, and the reversible and irreversible fouling resistances were reduced by 98.5% and 69.4%, individually. The surface functional groups were changed, and the dominant mechanisms were also converted to pore blocking from cake layer filtration. Overall, the experimental results would provide some new thoughts in actual production for algal-rich water treatment and UF membrane fouling alleviation.

Effect of peroxydisulfate oxidation catalyzed with ordered mesoporous carbons on controlling ultrafiltration membrane fouling by algal organic matter

As typical ordered mesoporous carbons (OMCs) materials, CMK-3 and CMK-8 were proposed for catalyzing peroxydisulfate (PDS), and the OMCs/PDS process was combined with membrane filtration to remove algal extracellular organic matter and mitigate membrane fouling. The CMK-3/PDS process achieved substantial reduction of dissolved organic carbon and UV₂₅₄, followed by CMK-8/PDS. The degradation behavior of fluorescent organics demonstrated the superior performance of OMCs/PDS, while the decomposition of high molecular weight (MW) compounds and generation of lower MW organics were observed. Generally, CMK-3 possessed higher catalytic activity on PDS compared with CMK-8 and powdered activated carbon. The CMK-3/PDS process distinctly decreased the fouling resistances for polyether sulfone and polyvinylidene fluoride membranes, with the reversible resistance reduced by 59.5-83.2% and irreversible resistance declined by 71.7-73.0%. In the meanwhile, CMK-3/PDS prolonged the volumes to the transition period, and postponed the cake layer's generation. The characterization of the membrane morphologies and chemical compositions also showed effective alleviation of fouling. The generated SO₄^-, OH, O₂^- and ¹O₂ as major active oxidation species provided radical as well as non-radical reaction ways for pollutants removal. Overall, our study provides some new ideas for membrane-based combined water purification processes.

Magnetic graphene oxide for methylene blue removal: adsorption performance and comparison of regeneration methods

A series of Fe₃O₄-graphene oxide (GO) composite materials (MGOs) with abundant surface area, rich oxygen-containing functional groups, and magnetic properties were prepared in a facile coprecipitation method and then employed for the adsorptive removal of methylene blue (MB) from water. The kinetic data were better fitted in the pseudo-second-order model than in the pseudo-first-order model, and the intraparticle diffusion model revealed the two-step diffusion process including diffusion in the boundary layer and in the porous structures. The maximum adsorption amounts of MB were calculated to be 37.5-108 mg/g at 25 °C and pH 9 using the Langmuir isotherm model. Thermodynamic study showed that the adsorption process was spontaneous, with ΔH° of 23.0-49.6 kJ/mol and ΔS° of 131-249 J∙mol^-1∙K^-1. The adsorption amount of MB increased with pH in the range of 4-10. Inorganic ions including Na⁺ and Ca²⁺ suppressed the adsorption of MB, and the more pronounced impact of Ca²⁺ was ascribed to its higher valence state. The cetyltrimethylammonium bromide (CTAB) surfactant showed a stronger inhibitory effect than Ca²⁺. The adsorption mechanism was proposed to be a combination of electrostatic interactions, hydrophobic adsorption, and electron donor-acceptor interactions. Two methods were used for the regeneration of spent MGO, and the results showed that the peroxomonosulfate (PMS) oxidation method was more favorable than the acid washing method, considering the better regeneration ability and lower amount of washing water used. Finally, the reaction mechanism of PMS oxidation was analyzed based on quenching tests and in situ open circuit potential measurements, which proved that OH and ¹O₂ played dominant roles and that the fine adsorption ability of MGO promoted the reaction between them and MB.

Synergistic process using calcium peroxide and ferrous iron for enhanced ultrafiltration of Microcystis aeruginosa-laden water

Algal blooms and eutrophication in natural surface water not only pose a threat to human health, but also adversely affect the water purification process. Ultrafiltration (UF) has been proved to be effective for the retention of algal cells, but its further application is still restricted by the relatively limited removal of algal organics and membrane fouling. To enhance the UF performance, a synergistic process using calcium peroxide and ferrous sulfate (CaO₂/FeSO₄) was proposed for the treatment of Microcystis aeruginosa-laden water. The results suggested that the removal of algal cells and organics, fluorescent components were effectively increased with the synergism of CaO₂ and FeSO₄. The particle size distribution and morphology revealed that the size of algal pollutants apparently increased due to the formation of algal flocs. With CaO₂/FeSO₄ pretreatment, the terminal specific flux of polyethersulfone and polyvinylidene fluoride membranes were increased by 75.0% and 56.5%, individually. The fouling resistances were significantly reduced, and the fouling mechanism transition to cake filtration was delayed. The membrane interface properties including morphologies and functional groups were characterized, further verifying the effectiveness. The in-situ formed Fe³⁺ integrated with Ca(OH)₂ showed excellent coagulation effect, thus promoting the agglomeration of algal foulants. Simultaneously, the generated hydroxyl radical could improve the oxidative degradation of algal organics. In conclusion, the CaO₂/FeSO₄ strategy has great advantages and application prospects in enhancing UF performance for Microcystis aeruginosa-laden water treatment.

Synergistic oxidation-filtration process of electroactive peroxydisulfate with a cathodic composite CNT-PPy/PVDF ultrafiltration membrane

Ultrafiltration is an advanced water treatment process which performs poorly in the removal of small molecule organic pollutants, and is susceptible to irreversible membrane fouling. In this study, a new carbon nanotube cross-linked polypyrrole composite ultrafiltration membrane (CNT-PPy/PVDF) was fabricated, and exhibited excellent conductivity, hydrophilicity, and permeability in a novel electro-filtration activated peroxydisulfate (PDS) system (EFAP) for cathodic electrochemical activation of PDS. The EFAP showed satisfactory performance in removal of series of small molecule organic pollutants (i.e., carbamazepine, sulfamethoxazole, phenol, diclofenac.) and stable removal ratio (remaining above 90% after 20 operating cycles). Further study proved the electric field could effectively protect the cathodic CNT-PPy/PVDF membrane from oxidative damage through continual free electrons injection. Besides, the EFAP achieved up to 95% flux recovery and 80% reduction of irreversible membrane fouling (bovine serum albumin as the model foulant). Moreover, experiments confirmed that the in situ generated ^•OH, SO₄^•-, and ¹O₂ were the main reactive oxygen species contributing to small organics removal, while the irreversible membrane fouling mitigation was mainly due to the electrical repulsion, SO₄^•- and ^•OH, rather than ¹O₂. This new type of EFAP may provide a promising and sustainable approach in organic emerging contaminants control in water treatment.

The nitrogen-doped multi-walled carbon nanotubes modified membrane activated peroxymonosulfate for enhanced degradation of organics and membrane fouling mitigation in natural waters treatment

The synthesized catalyst nitrogen-doped multi-walled carbon nanotubes (N-MWCNTs) were introduced into membrane technology for peroxymonosulfate (PMS) activation. The enhanced permeability of the N-MWCNTs-modified membrane might be attributed to the increase in hydrophilicity and membrane porosity. The catalytic degradation and membrane filtration performance for the N-MWCNTs-modified membrane/PMS system in treating different types of natural waters were evaluated. The removal of phenol by the N-MWCNTs-modified membrane was 83.67% in 2 min, which was greater than the phenol removal by the virgin membrane (3.39%) and N-MWCNT powder (41.42%), respectively. Moreover, the resultant membrane coupled with PMS activation exhibited outstanding removal effects on the fluorescent organics in the secondary effluent and Songhua River water. The combination effectively reduced the total membrane fouling caused by the secondary effluent, Songhua River water, and three typical model organics by 28.19-61.98%. Electron paramagnetic resonance and classical quenching tests presented that the active species (SO4·-, ·OH, and 1O2) and other non-radical processes generated by N-MWCNTs activated PMS decreased the foulants deposition on the membrane surface. Meanwhile, the membrane interception accelerated the aggregation of pollutants and PMS towards the membrane surface through applied pressure, facilitating their mass transfer to the N-MWCNTs surface for the catalysis exerted more effectively. This study demonstrated the potential application of the coupling of N-MWCNTs catalytic oxidation and the UF, which offers a promising prospect to improve the permeate quality and simultaneously overcome the membrane fouling barriers.

The role of PAC adsorption-catalytic oxidation in the ultrafiltration performance for treating natural water: Efficiency improvement, fouling mitigation and mechanisms

Powdered activated carbon (PAC) has turned out to be an efficient adsorbent in drinking water treatment, whereas its application integrated with membrane filtration is still controversial because of the combined fouling effect between organic pollutants and PAC. To this end, an integrated process of combining PAC adsorption-catalytic oxidation and membrane filtration was proposed for natural surface water treatment. The synergistic effect of PAC and peroxymonosulfate (PMS) was confirmed through the generation of reactive oxidation species, and both radical oxidative pathways (^•OH, SO₄^•- and O₂^•-) and nonradical (¹O₂ and PMS) pathways involved in the process. The removal efficiency of DOC and UV₂₅₄ was significantly strengthened by PAC/PMS, with removal rates of 56.1% and 64.9%, respectively. The integration of PAC and PMS could significantly enhance the reduction of fluorescent organics, and pollutants with varying molecular weights. The fouling condition of membrane was dramatically alleviated, with the flux increased by 38.9%, and the reversible and irreversible resistances declined by 79.7% and 48.3%, respectively. The major fouling mechanism was significantly changed, and complete pore blocking always played a dominant role, rather than cake filtration. The effectiveness of PAC/PMS was further verified by the characterization of membrane surface morphologies and functional groups. Moreover, the attractive interactions between foulants and membrane were converted to repulsive interactions with the pretreatment of PAC/PMS. The proposed synergistic process was efficient and convenient, which could significantly improve the purification efficiency of conventional PAC-UF system in drinking water treatment.

Coupling sodium percarbonate (SPC) oxidation and coagulation for membrane fouling mitigation in algae-laden water treatment

To alleviate algal fouling in membrane water treatment processes, conventional technologies such as coagulation with poly aluminum chloride (PACl) has been widely adopted by many drinking water treatment plants. However, coagulation alone exhibited relatively weak removal effect for algal pollutants, and the coagulant residues due to the excess dosage also raised concerns. Thus, a novel process of coupling sodium percarbonate (SPC) oxidation and PACl coagulation was proposed, integrated with membrane filtration for algae-laden water treatment. The dosages of PACl and SPC were optimized, and the SPC dosing strategies were systematically compared. The changes in the characteristics of algal pollutants were investigated, and the results revealed that the resistance of algal foulants to aggregation was decreased, and the particle size of algal foulants became larger. With the synergism of coagulation and oxidation, the degradation of fluorescent organics was strengthened, and macromolecular biopolymers were decomposed into low molecular weight organics. The fouling control efficiency was further explored, and the results indicated that both irreversible and reversible fouling were effectively controlled, among which PACl/SPC (simultaneous treatment) performed best with the irreversible fouling reduced by 90.5%, while the efficiency of SPC-PACl (SPC followed by PACl) was relatively lower (57.3%). The fouling mechanism was altered by slowing the formation of cake filtration, and the reduction of algal cells played a more important role for the fouling alleviation. The interface properties of contaminated membranes (i.e., functional groups, images, and micromorphology) were characterized, and the efficiency of the proposed strategy was further verified. The proposed strategy exhibits great application values for improving membrane performance during algae-laden water treatment.

Fabrication of Co3O4-Bi2O3-Ti catalytic membrane for efficient degradation of organic pollutants in water by peroxymonosulfate activation

In this study, a functionalized Co₃O₄-Bi₂O₃-Ti catalytic membrane (CBO-Ti-M) was prepared and applied for removing organic pollutants via activating peroxymonosulfate (PMS) in the dead-end filtration mode. Characterizations including scanning electron microcopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the Co₃O₄-Bi₂O₃ catalyst was successfully supported on the Ti membrane. The CBO-Ti-M /PMS system could efficiently remove various organic pollutants such as sulfamethoxazole, methyl orange, bisphenol A and methylene blue, achieving removal efficiencies of 98.0%-99.5%. The effects of PMS concentration, flow rate and solution environment on degradation efficiency were investigated in detail. Furthermore, quenching experiments, electron spin resonance (ESR) and in-situ open circuit potential (OCP) tests collectively demonstrated that singlet oxygen as well as the non-radical electron transfer pathway mainly contributed in the reaction mechanism. The synergistic effect of Co and Bi was illustrated according to XPS results, and the possible degradation pathway of MB was proposed based on LC-MS analysis. Reusability test showed that pollutant removal efficiency with the CBO-Ti-M /PMS system remained stable in four runs and limited metal leaching was observed.