Tailored oxygen defect coupling composition engineering Co Mn2O4 spinel hollow nanofiber enables improved Bisphenol A catalytic degradation

Hollow Nanoreactors Unlock New Possibilities for Persulfate-Based Advanced Oxidation Processes

As a novel type of catalytic material, hollow nanoreactors are expected to bring new development opportunities in the field of persulfate-based advanced oxidation processes due to their peculiar void-confinement, spatial compartmentation, and size-sieving effects. For such materials, however, further clarification on basic concepts and construction strategies, as well as a discussion of the inherent correlation between structure and catalytic activity are still required. In this context, this review aims to provide a state-of-the-art overview of hollow nanoreactors for activating persulfate. Initially, hollow nanoreactors are classified according to the constituent components of the shell structure and their dimensionality. Subsequently, the different construction strategies of hollow nanoreactors are described in detail, while common synthesis methods for these construction strategies are outlined. Furthermore, the most representative advantages of hollow nanoreactors are summarized, and their intrinsic connections to the nanoreactor structure are elucidated. Finally, the challenges and future prospects of hollow nanoreactors are presented.

Degradation of 2, 4-dichlorophenol by peroxymonosulfate catalyzed by ZnO/ZnMn2 O4

In this study, a highly efficient peroxymonosulfate (PMS) activator, ZnO/ZnMn2 O4 , was synthesized using a simple one-step hydrothermal method. The resulting bimetallic oxide catalyst demonstrated a homogenous and high-purity composition, showcasing synergistic catalytic activity in activating PMS for degrading 2, 4-dichlorophenol (2, 4-DCP) in aqueous solution. This catalytic performance surpassed that of individual ZnO, Mn2 O3 , and ZnMn2 O4 metal materials. Under the optimized conditions, the removal efficiency of 2, 4-DCP reached approximately 86% within 60 min, and the catalytic ability remained almost constant even after four cycles of recycling. The developed degradation system proved effective in degrading other azo-dye pollutants. Certain inorganic anions such as HPO4 - , HCO3 - , and NO3 - significantly inhibited the degradation of 2, 4-DCP, while Cl- and SO4 2- did not exhibit such interference. Results from electrochemical experiments indicated that the electron transfer ability of ZnO/ZnMn2 O4 surpassed that of individual metals, and electron transfer occurred between ZnO/ZnMn2 O4 and the oxidant. The primary active radicals responsible for degrading 2, 4-DCP were identified as SO4 •- , OH• and O2 •- , generated through the oxidation and reduction of PMS catalyzed by Zn (II) and Mn (III). Furthermore, X-ray photoelectron spectroscopy (XPS) analysis of the fresh and used catalysts revealed that the exceptional electron transfer ability of ZnO facilitated the valence transfer of Mn (III) and the transfer of electrons to the catalyst's oxygen surface, thus enhancing the catalytic efficiency. The analysis of radicals and intermediates indicates that the two main pathways for degrading 2, 4-DCP involve hydroxylation and radical attack on its aromatic ring. PRACTITIONER POINTS: A bimetallic ZnO/ZnMn2 O4 catalyst was synthesized and characterized. ZnO/ZnMn2 O4 can synergistically activate PMS to degrade 2, 4-DCP compared with single metal oxide. Three primary active radicals, O2 •- , • OH, and SO4 •- , were generated to promote the degradation. ZnO promoted electron transfer among the three species of Mn to facilitate oxidizing pollutants. Hydroxylation and radical attack on the aromatic ring of 2, 4-DCP are the two degradation pathways.

In situ anchoring of iron and zinc oxides nanoparticles onto rice husk cellulose for efficient wastewater remediation

The development of effective and economical technologies for the treatment of contaminated wastewater has been of great significance to researchers. Therefore, an equal molar ratio of iron and zinc oxides nanoparticles was hydrothermally immobilized on the cellulose fibers of rice husk. Using XRD, SEM, FTIR, EDX, TEM, VSM, BET, and TGA/DTG, the structure, and characteristics of Cel/α-Fe₂O₃-ZnO, a ternary nanocomposite, were affirmed. The nanocomposite displayed a mesoporous structure with a substantial surface area. The efficiency of nanocomposite as a new adsorbent has been studied for the extraction of reactive black 5 (RB5), which is a diazo-anionic dye from simulated wastewater. The medium's pH was the dominant factor of RB5 adsorption, and the optimal removal effectiveness was acquired at pH 2. The adsorption values of RB5 correspond to second-order kinetics. They also matched Langmuir with a maximum capacity of 99.30 mg g^-1. For real industrial wastewater, Cel/α-Fe₂O₃-ZnO has successfully reduced a number of major pollutants, including ammonia (92.73 %), color (92.88 %), COD (91.53 %), BOD₅ (84.97 %), TSS (96.27 %), TP (52.17 %) and TN (47.23 %). These results illustrate the effective application of the ternary nanocomposite in wastewater treatment.

Modulating photothermal properties by integration of fined Fe-Co in confined carbon layer of SiO2 nanosphere for pollutant degradation and solar water evaporation

Environmental governance by photothermal materials especially for the separation of organic pollutants and regeneration of freshwater afford growing attention owing to their special solar-to-heat properties. Here, we construct a special functional nanosphere composed of an internal silica core coated by a thin carbon layer encapsulated plasmonic bimetallic FeCo₂O₄ spinel (SiO₂@CoFe/C) by a facile self-assembled approach and tuned calcination. Through combining the advantage of bimetallic Fe-Co and carbon layer, this obtained nanosphere affords improved multiple environmental governing functions including peroxymonosulfate (PMS) activation to degrade pollutants and photothermal interfacial solar water evaporation. Impressively, fined bimetal (FeCo) species (20 nm) acted as main catalytic substance were distributed on the N-doping carbon thin layer, which favors electron transfer and reactive accessibility of active metals. The increasing treatment temperature of catalysts caused the optimization of the surface active metal species and tuning catalytic properties in the AOPs. Besides, the incorporation of Co in the SiO₂@CoFe/C-700 could enable the improved PMS activation efficiency compared to SiO₂@Fe/C-700 and the mixed SiO₂@Co/C-700 and SiO₂@Fe/C-700, hinting a synergetic promotion effect. The bimetal coupled catalyst SiO₂@CoFe/C-700 affords enhanced photothermal properties compared to SiO₂@Co/C-700. Furthermore, photothermal catalytic PMS activation using optimal SiO₂@CoFe/C-700 was further explored in addressing stubborn pollutants including oxytetracycline, sulfamethoxazole, 2, 4-dichlorophenol, and phenol. The free radical quenching control suggests that both the sulfate radical, hydroxyl radical, superoxide radical, and singlet oxygen species are involved in the degradation, while the hydroxyl radical and singlet oxygen play a dominant role. Furthermore, the implementation of a solar-driven interfacial water evaporation model using SiO₂@CoFe/C-700 was further studied to obtain freshwater regeneration (1.26 kg m^-2 h^-1, 76.81% efficiency), indicating the comprehensive ability of the constructed nanocomposites for treating complicated environmental pollution including organics removal and freshwater regeneration.

Synthesis of triethylenetetramine modified sodium alginate/CuS nanocrystal composite for enhanced Cr(VI) removal: Performance and mechanism

Photocatalysis has been widely used for the removal of hexavalent chromium from wastewater as an efficient and environmental friendly method. However, conventional photocatalysts generally exhibit poor adsorption properties toward Cr(VI), resulting in unsatisfactory performance in high concentrated wastewaters. In this study, we synthesized a novel composite material with high Cr(VI) adsorption ability by blending prepared CuS nanocrystals into triethylenetetramine modified sodium alginate for the enhanced photocatalytic removal of Cr(VI). Effect of CuS dosage, pH value, light source and intensity were discussed for the optimum Cr(VI) removal conditions. The synthesized composite has shown good adsorption performance toward Cr(VI) and the overall removal rate reached 98.99 % within 50 min under UV light irradiation with citric acid as hole scavenger. Adsorption isotherm, thermodynamics, and kinetics with corresponding model fitting were discussed, which suggested that the monolayer and chemical adsorption dominated the adsorption process. Characterization results indicated that amino and hydroxyl groups contributed electrons in the photocatalysis reaction for the reduction of Cr(VI) to Cr(III). CuS nanocrystals can enhance the surface charge and light absorbance ability of the composite, and the Cr(VI) removal was governed by electrostatic interaction and photo-induced redox reaction.

Enabling Efficient Aerobic 5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid in Water by Interfacial Engineering Reinforced Cu-Mn Oxides Hollow Nanofiber

Herein, a one-dimensional hollow nanofiber catalyst composed of tightly packed multiphase metal oxides of Mn₂ O₃ and Cu_1.4 Mn_1.6 O₄ was constructed by electrospinning and tailored thermal treatment procedure. The characterization results comprehensively confirmed the special morphology and composition of various comparative catalysts. This strategy endowed the catalyst with abundant interfacial characteristics of components Mn₂ O₃ and Cu_1.4 Mn_1.6 O₄ nanocrystal. Impressively, the tuning thermal treatment resulted in tailored Cu^I sites and surface oxygen species of the catalyst, thus affording optimized oxygen vacancies for reinforced oxygen adsorption, while the concomitant enhanced lattice oxygen activity in the constructed composite catalyst ensured the higher catalytic oxidation ability. More importantly, the regulated proportion of oxygen vacancy and lattice oxygen in the composite catalyst was obtained in the best catalyst, beneficial to accelerate the reaction cycle. Compared to other counterparts obtained by different temperatures, the CMO-500 sample exhibited superior selective aerobic 5-hydroxymethylfurfural (HMF) oxidation to 2,5-furandicarboxylic acid (FDCA, 96 % yield) in alkali-bearing aqueous solution using O₂ at 120 °C, which resulted from the above-mentioned composition optimization and interfacial engineering reinforced surface oxygen consumption and regeneration cycle. The reaction mechanism was further proposed to uncover the lattice oxygen and oxygen vacancy participating HMF conversion process.