3D-printed montmorillonite nanosheets based hydrogel with biocompatible polymers as excellent adsorbent for Pb(Ⅱ) removal

Zinc oxide nanoparticles encapsulated in alginate beads: a promising and recyclable adsorbent for simultaneous uptake of toxic metals

Heavy metal toxicity is a known problem and various methods are used for treatment. Adsorption has some advantages and it would be promising if environmentally friendly and cheap materials were utilized. Alginate and zinc oxide nanoparticles were selected and composite alginate beads were used for the removal of mixed metals from aqueous solutions. Batch and column experiments were conducted to determine some parameters' effects and the adsorbent's real application potential. According to the batch experiments, zinc oxide nanoparticles to alginate ratio of 0.5 g g-1, and pH levels nearby to the neutral range led to better metal removals. 0.5 ml min-1of flow rate supplied better metal removal efficiencies in columns, with the highest treatment as 86% of Pb2+. Acid treatment can be successfully applied for the regeneration of the adsorbent, at least three times only with a 4% reduction in the adsorption efficiency. Heavy metal uptake was compatible with the pseudo 2nd order model indicating chemisorption as a dominant mechanism. Also, the intraparticle diffusion model illustrated adsorption might govern more than one step. The Langmuir model had the best fit and suggested monolayer covering for Pb2+, 76.3 mg g-1. Alginate-based nanocomposite beads were useful for mixed metal removal and could be used.

Fluorescent starch-based hydrogel with cellulose nanofibrils and carbon dots for simultaneous adsorption and detection of Pb(II)

The adsorption removal of lead (Pb) ions has become a crucial area of research due to the potential health hazards associated with Pb contamination. Developing cost-effective adsorbents for the removal of Pb(II) ions is significantly important. Hence, a novel fluorescent starch-based hydrogel (FSH) using starch (ST), cellulose nanofibrils (CN), and carbon dots (CD) was fabricated for simultaneous adsorption and detection of Pb(II). A comprehensive characterization of FSH, including its morphological features, chemical composition, and fluorescence characteristics, was conducted. Notably, FSH exhibited a maximum theoretical adsorption capacity of 265.9 mg/g, which was 13.0 times higher than that of pure ST. Moreover, FSH was employed as a fluorescent sensor for Pb(II) determination, achieving a limit of detection (LOD) of 0.06 μg/L. An analysis was further performed to investigate the adsorption and detection mechanisms of Pb(II) utilizing FSH. This study provides valuable insights into the production of a novel cost-effective ST-based adsorbent for the removal of Pb(II) ions.

Efficient removal of heavy metals from aqueous solutions using Mn-doped FeOOH: Performance and mechanisms

The treatment of heavy metal ion contamination in aquatic ecosystems has been a growing global concern for centuries. Iron oxide nanomaterials are effective in heavy metals removal, but are frequently challenging due to the precipitation of Fe(III) and poor reusability. To improve the removal of heavy metals by iron hydroxyl oxide (FeOOH), the iron-manganese oxide material (FMBO) was separately prepared to remove Cd(II), Ni(II), and Pb(II) in individual and multiple systems. Results revealed that the loading of Mn enlarged the specific surface area and stabilized the structure of FeOOH. FMBO achieved 18%, 17%, and 40% higher removal capacities of Cd(II), Ni(II), and Pb(II) than that of FeOOH, respectively. Besides, mass spectrometry analysis demonstrated that the surface hydroxyls (-OH, Fe/Mn-OH) of FeOOH and FMBO provided the active sites for metal complexation. Fe(III) was reduced by Mn ions and further complexed with heavy metals. Further density functional theory calculations revealed that Mn loading led to the structural reconstruction of the electron transfer, which significantly promoted stable hybridization. This confirmed that FMBO improved the properties of FeOOH and was efficient for removing heavy metals from wastewater.

Chitosan-induced self-assembly of montmorillonite nanosheets along the end-face for methylene blue removal from water

In this study, chitosan-induced self-assembly of montmorillonite nanosheets (MMTNS) along the end-face to form the layered and porous structured composite with high adsorption capacity towards MB dye wastewater was investigated. The self-assembly process was driven by the hydrogen-bond interaction among -OH groups distributed along the end-face of MMTNS and -NH₂ groups on chitosan (CS) chain, which finally formed the infinite two-dimensional lamellae. This technology remained the exposed adsorption sites on MMTNS surface, and solved the separation issue of spent MMTNS from water, making MMTNS/CS an excellent adsorption material for macromolecular MB dye. The maximum adsorption capacity of MMTNS/CS towards MB reached 243 mg/g, which was achieved via the Na⁺- exchange, hydrogen-bond and n-π stacking interactions with MB molecules. This work aimed at breaking through the bottleneck of small adsorption capacity of traditional MMT adsorbents, solving the problem of solid-liquid separation of nanosheets, and effectively reducing the adsorption cost, which might guide an important direction for adsorption material design and development in the future.

Design strategies, surface functionalization, and environmental remediation potentialities of polymer-functionalized nanocomposites

Inorganic nanoparticles (NPs) have a tunable shape, size, surface morphology, and unique physical properties like catalytic, magnetic, electronic, and optical capabilities. Unlike inorganic nanomaterials, organic polymers exhibit excellent stability, biocompatibility, and processability with a tailored response to external stimuli, including pH, heat, light, and degradation properties. Nano-sized assemblies derived from inorganic and polymeric NPs are combined in a functionalized composite form to import high strength and synergistically promising features not reflected in their part as a single constituent. These new properties of polymer/inorganic functionalized materials have led to emerging applications in a variety of fields, such as environmental remediation, drug delivery, and imaging. This review spotlights recent advances in the design and construction of polymer/inorganic functionalized materials with improved attributes compared to single inorganic and polymeric materials for environmental sustainability. Following an introduction, a comprehensive review of the design and potential applications of polymer/inorganic materials for removing organic pollutants and heavy metals from wastewater is presented. We have offered valuable suggestions for piloting, and scaling-up polymer functionalized nanomaterials using simple concepts. This review is wrapped up with a discussion of perspectives on future research in the field.

Programmable Anisotropic Hydrogel Composites for Soft Bioelectronics

Fabrication of hydrogel composites embedded with aligned one-dimensional nanoparticles has shown substantial growth over the last five years. Direct ink printing technology (DIW) has been used in this work to create the alignment of the one-dimensional nanoparticles due to the shear gradient of the pesudoplastic precursor (2-hydroxyethyl methacrylate (HEMA) with thickening agents). Orderly distributed one-dimensional particles constructing anisotropic nanostructures endow the hydrogel composite with unique mechanical, electric, or electromechanical coupling properties. Quasi-static uniaxial tensile test, electric resistivity and piezoresistivity measurements have been conducted for investigating the mechanical, electric, and the electromechanical coupling properties of the hydrogel composites, respectively. Based on the experimental results, it can be speculated that the developed printing process is able to fabricate hydrogel composites with programmable anisotropic mechanical, electric, and electromechanical properties. The products pumped out from this work has the potential of being substrate for soft devices, and may have great impact on the fields of flexible bioelectronics. This article is protected by copyright. All rights reserved.