Fluorinated porous organic polymers for efficient recovery perfluorinated electronic specialty gas from exhaust gas of plasma etching

A HF-resistant perfluorinated porous polymer for the separation of electronic specialty gases

A perfluorinated porous polymer, PFPP-1, featuring large SBET (1068 m2 g-1) and ultrahigh fluorine content (35.6 at%), was synthesized to accomplish high HF resistance and selective adsorption of F-gases. Enhanced dipole interactions and optimal F-gas/N2 selectivity highlight PFPP-1's potential for efficient recovery of electronic specialty gases in sustainable electronics.

Molecular Mechanism Behind the Capture of Fluorinated Gases by Metal-Organic Frameworks

Fluorinated gases (F-gases) play a vital role in the chemical industry and in the fields of air conditioning, refrigeration, health care, and organic synthesis. However, the direct emission of waste gases containing F-gases into the atmosphere contributes to greenhouse effects and generates toxic substances. Developing porous materials for the energy-efficient capture, separation, and recovery of F-gases is highly desired. Recently, as a highly designable porous adsorbents, metal-organic frameworks (MOFs) exhibit excellent selective sorption performance toward F-gases, especially for the recognition and separation of different F-gases with highly similar properties, showing their great potential in F-gases control and recovery. In this review, we discuss the capture and separation of F-gases and their azeotropic, near-azeotropic, and isomeric mixtures in various application scenarios by MOFs, specifically classify and analyze molecular interaction between F-gases and MOFs, and interpret the mechanisms underlying their high performance regarding both adsorption capacity and selectivity, providing a repertoire for future materials design. Challenges faced in the transformation research roadmap of MOFs adsorbent separation technologies toward F-gases are also discussed, and areas for future research endeavors are highlighted.

Room-Temperature Synthesis of a Fluorine-Functionalized Nanoporous Organic Polymer for Highly Efficient SF6 Adsorption and Separation

Sulfur hexafluoride (SF6) is widely used in the power industry and significantly contributes to the greenhouse effect, necessitating the development of efficient materials for SF6 capture, particularly fluorine-containing materials. However, existing fluorine-containing materials often require complex monomers and high synthesis temperatures. Herein, we report the synthesis of a fluorine-functionalized carbazole-based nanoporous organic polymer (CNOP-7) at room temperature, using commercially available 4,4'-bis(9H-carbazole-9-yl)-1,1'-biphenyl and 1,1,1-trifluoroacetone. CNOP-7 contains 14.7% fluorine atoms and exhibits a high specific surface area of 1270 m2·g-1, demonstrating excellent SF6 adsorption and separation performance. The SF6/N2 selectivity of CNOP-7 reaches 107 at 273 K and 73 at 298 K. Furthermore, dynamic breakthrough experiments confirm that CNOP-7 can efficiently and repeatedly separate SF6 from SF6/N2 mixtures. Molecular simulations reveal the mechanism behind its efficient separation. This work offers fresh perspectives on the development and fabrication of adsorbents for efficient SF6 sequestration.

Room-temperature synthesis of a fluorine-functionalized nanoporous organic polymer for efficient SF6 separation

Addressing the environmental impact of SF6, we synthesized a fluorine-functionalized triphenylamine-based nanoporous organic polymer, ANOP-8, at room temperature using N,N,N',N'-tetraphenylbenzidine and 2,3,4,5,6-pentafluorobenzaldehyde. ANOP-8, which incorporates 14.86% fluorine, has a BET surface area of 694 m2 g-1 and a robust C-C structure. It achieves SF6/N2 selectivities of 65 and 51 at 298 K and 1 bar through ideal adsorbed and breakthrough experiments, respectively. Molecular simulations have revealed the adsorption mechanisms, underscoring the potential of fluorinated polymers in developing future adsorbents for toxic gases.

Non-CO2 greenhouse gas separation using advanced porous materials

Global warming has become a growing concern over decades, prompting numerous research endeavours to reduce the carbon dioxide (CO2) emission, the major greenhouse gas (GHG). However, the contribution of other non-CO2 GHGs including methane (CH4), nitrous oxide (N2O), fluorocarbons, perfluorinated gases, etc. should not be overlooked, due to their high global warming potential and environmental hazards. In order to reduce the emission of non-CO2 GHGs, advanced separation technologies with high efficiency and low energy consumption such as adsorptive separation or membrane separation are highly desirable. Advanced porous materials (APMs) including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), porous organic polymers (POPs), etc. have been developed to boost the adsorptive and membrane separation, due to their tunable pore structure and surface functionality. This review summarizes the progress of APM adsorbents and membranes for non-CO2 GHG separation. The material design and fabrication strategies, along with the molecular-level separation mechanisms are discussed. Besides, the state-of-the-art separation performance and challenges of various APM materials towards each type of non-CO2 GHG are analyzed, offering insightful guidance for future research. Moreover, practical industrial challenges and opportunities from the aspect of engineering are also discussed, to facilitate the industrial implementation of APMs for non-CO2 GHG separation.

Combining Polymerization and Templating toward Hyper-Cross-Linked Poly(propargyl aldehyde)s and Poly(propargyl alcohol)s for Reversible H2O and CO2 Capture and Construction of Porous Chiral Networks

Two series of hyper-cross-linked microporous polyacetylene networks containing either -[CH=C(CH=O)]- or -[CH=C(CH₂OH)]- monomeric units are reported. Networks are prepared by chain-growth copolymerization of acetal-protected propargyl aldehyde and acetal-protected propargyl alcohol with a 1,3,5-triethynylbenzene cross-linker followed by hydrolytic deprotection/detemplating. Deprotection not only liberates reactive CH=O and CH₂OH groups in the networks but also modifies the texture of the networks towards higher microporosity and higher specific surface area. The final networks with CH=O and CH₂OH groups attached directly to the polyene main chains of the networks have a specific surface area from 400 to 800 m²/g and contain functional groups in a high amount, up to 9.6 mmol/g. The CH=O and CH₂OH groups in the networks serve as active centres for the reversible capture of CO₂ and water vapour. The water vapour capture capacities of the networks (up to 445 mg/g at 297 K) are among the highest values reported for porous polymers, making these materials promising for cyclic water harvesting from the air. Covalent modification of the networks with (R)-(+)-3-aminopyrrolidine and (S)-(+)-2-methylbutyric acid enables the preparation of porous chiral networks and shows networks with CH=O and CH₂OH groups as reactive supports suitable for the anchoring of various functional molecules.

Porous organic polymers for drug delivery: hierarchical pore structures, variable morphologies, and biological properties

Porous organic polymers have received considerable attention in recent years because of their applicability as biomaterials. In particular, their hierarchical pore structures, variable morphologies, and tunable biological properties make them suitable as drug-delivery systems. In this review, the synthetic and post forming/control methods including templated methods, template-free methods, mechanical methods, electrospun methods, and 3D printing methods for controlling the hierarchical structures and morphologies of porous organic polymers are discussed, and the different methods affecting their specific surface areas, hierarchical structures, and unique morphologies are highlighted in detail. In addition, we discuss their applications in drug encapsulation and the development of stimuli (pH, heat, light, and dual-stimuli)-responsive materials, focusing on their use for targeted drug release and as therapeutic agents. Finally, we present an outlook concerning the research directions and applications of porous polymer-based drug delivery systems.