MOFs and GO-based composites as deliberated materials for the adsorption of various water contaminants

Construction of a MIL-101-DGA (MOF) Coupling Betaine Hydrochloride System for the Green and Efficient Separation of Zirconium and Hafnium

Metal-organic framework materials (MOFs) have potential for practical applications in solid-phase separation technology. However, no studies of the separation of hafnium and zirconium using MOFs have been performed. This work synthesized MIL-101-DGA solid-phase adsorbent material, which was synthesized using amino-containing MIL-101-NH2 as a matrix material by introducing diglycolic acid (DGA) functional groups through a one-step ring-opening reaction. Betaine hydrochloride was selected as the complexing agent to establish the MIL-101-DGA coupling betaine hydrochloride push-pull system; this system could act as an alternative to the traditional MIBK-HSCN separation system. We are the first to report that this MIL-101-DGA coupling betaine hydrochloride system could obtain separation coefficients (βZr/Hf) of 19.7 at pH 0.50 and 8.2 at pH 1.46. Furthermore, the highest adsorption capacity of MIL-101-DGA for Zr was 63.7 mg/g. These results demonstrated that MIL-101-DGA had excellent separation performance for zirconium and hafnium in the betaine hydrochloride medium. This system also exhibited an outstanding cycling performance and immersion stability. After multiple adsorption/desorption cycles and 1 week of immersion in various solutions, the structure and adsorption capability essentially remained unchanged. The adsorption mechanism was thoroughly examined using a suite of analysis and detection methods, including the slope method, FT-IR, XPS, and DFT. In conclusion, we propose that the MIL-101-DGA coupling betaine hydrochloride system, which is an efficient and green separation system, could replace the traditional MIBK-HSCN separation system; our study provides a concept for the industrialization of zirconium and hafnium separation from key mineral resources.

Fabrication of a poly(m‑aminophenol)/3-aminopropyl triethoxysilane/graphene oxide ternary nanocomposite for removal of Cu(II) from aqueous solution

Three composites based on Poly (meta-aminophenol) (PmAP), (3-aminopropyl) triethoxysilane (APTES) and graphene oxide (GO) were synthesized with initial GO dispersion of 3.3, 6.6, and 9.9 mg/mL. First, in-situ polymerization of meta-aminophenol monomer on the surface of graphene oxide (GO) was carried out. Then, the hydroxyl groups of both the GO and the polymer were targeted using (3-aminopropyl) triethoxysilane (APTES) to stop the polymer solubility, increase adsorption sites, and bind the two components. The obtained three composites were applied for efficient removal of Cu(II) from polluted water. PmAP/APTES/GO(6.6) composite was the best one for the uptake of Cu(II) with a maximum adsorption capacity of 324.54 mg/g at 40 °C and pH 7 according to Langmuir. PmAP/APTES/GO(6.6) hybrid composite was characterized by different techniques. The adsorption of Cu(II) on this composite was optimized under various experimental conditions. Furthermore, the isotherm data of the uptake of Cu(II) on PmAP/APTES/GO(6.6) were found to agree with the Freundlich and Langmuir model's linear and nonlinear forms. Chemosorption was suggested by the Dubinin-Radushkevich (D-R) isotherm model as the calculated mean sorption energy exceeds 16 kJ/mol. The thermodynamic analysis of the adsorption process reflects an endothermic, spontaneous process that leads to more disorder at the solid-liquid interface. The chemical interactions between Cu(II) versus oxygen and nitrogen of the functional groups on the surface were demonstrated by X-ray Electron Spectroscopy (XPS). Five cycles of adsorption and desorption of Cu(II) from the prepared composite were carried out with a loss of only 6.3% of its adsorption capacity.

Enhancement of Methylene Blue Adsorption by Acid-Base Neutralization-Induced Bulging MXene/RGO Composite Foams

Nanocomposite films made from graphene oxide (GO) and MXene have a dense layered structure due to nanosheet self-stacking, limiting their dye adsorption performance. In this study, acid-base neutralization reactions are used to induce MXene/reduced graphene oxide (RGO) films bulging, which opens the stacked layer structure within the membrane and enhances MB adsorption performance. The effects of the pH, temperature, contact time, and initial concentration of MB on the adsorption performance are further investigated. The results indicate that the adsorption process conforms to the pseudo-second-order kinetic and Freundlich isotherm models and is heat-absorbing and spontaneous, and the MXene/RGO foams have an adsorption capacity of up to 1099.5 mg g-1 for MB. In addition, our study show that the MXene/RGO foams not only have better reusability, but also exhibit better adsorption for other dyes. The efficient MB removal is attributed to the increased specific surface area of the composite foams, increased active sites, strong electrostatic interactions between MB and the composite foams, as well as intercalation adsorption. These findings offer new options for solving dye effluent problems.

Ligand-triggered antenna effect and dual emissions in Eu(III) MOF and its application in multi-mode sensing of 1,4-dioxane

A new set of metal-organic frameworks was designed by functionalizing g-C3N4 with benzoic acid and using them as structure-directing ligands during the metal-organic framework (MOF) formation. One such MOF exhibited dual emissions, both metal- and ligand-centered, enabling ratiometric sensing of the carcinogenic industrial solvent dioxane. The fabricated MOFs possessed a unique fluffy spherical morphology that enabled atomic level resolution in transmission electron microscopy-a rarity in MOFs due to the 'Knock-on' effect. Sensor experiments showed a rapid response within 5 s of analyte introduction and achieved a low limit of detection (LOD) of 0.026 ppm, well below the FDA-approved level of 10 ppm. In addition, the sensor exhibited exceptional selectivity, discriminating 1,4-dioxane from a pool of 16 solvents. This increased sensing capability was attributed to the formation of complexes and precise alignment of energy levels between the host and analyte, facilitating photoinduced electron transfer (PET). This material is equally efficient for colorimetric detection of the same solvent under excitation of UV light as well as gas phase detection of this volatile organic compound through I-V characteristics. Density functional theory (DFT) analysis supported the crucial role of Eu and the ligand system in efficiently detecting 1,4-dioxane by fluorescence spectroscopy, as shown in the energy level diagram. Future research could focus on optimizing these metal-organic frameworks for enhanced industrial applications in the detection of dioxane and exploring their potential applications in real-world environmental monitoring and public health safety.

Aggregation of graphene oxide upon the stripping of oxidized debris: An experimental and molecular dynamics simulation study

The most recent structural study of graphene oxide (GO) indicates that the oxidized debris (ODs) adhered to as-prepared GO will strip in certain aquatic settings. The impact of ODs stripping on the characteristics of GO has been widely reported, but its effects on GO aggregation have received less attention. Here, the influence of OD stripping on the GO aggregation property was identified, and the aggregation of as-prepared GO and GO upon OD stripping was compared. Upon ODs stripping, the pKa values of GO shifted from 3.91, 6.25, and 9.84 to 4.54, 6.65, and 10.21, respectively. Further analysis indicated the removal of ODs reduced the net negative charge and improved the hydrophobicity of GO, hence promoting the aggregation of GO. The acceleration of GO-Ca2+-OD aggregate formation was facilitated by the collective effects of ODs stripping, functional group deprotonation, double layer compression, OD bridging, and charge neutralization. The metal ions and stripped ODs attach to GO edges and link GO, which perform like bridges and contribute to further aggregation. In general, the existence of ODs adds complexity to the constructions and characteristics of GO, and it is important to take this into account while evaluating the aggregation characteristic of GO-based materials.

Progressive Insights into Metal-Organic Frameworks and Metal-Organic Framework-Membrane Composite Systems for Wastewater Management

The sustainable management of wastewater through recycling and utilization stands as a pressing concern in the trajectory of societal advancement. Prioritizing the elimination of diverse organic contaminants is paramount in wastewater treatment, garnering significant attention from researchers worldwide. Emerging metal-organic framework materials (MOFs), bridging organic and inorganic attributes, have surfaced as novel adsorbents, showcasing pivotal potential in wastewater remediation. Nevertheless, challenges like limited water stability, elevated dissolution rates, and inadequate hydrophobicity persist in the context of wastewater treatment. To enhance the performance of MOFs, they can be modified through chemical or physical methods, and combined with membrane materials as additives to create membrane composite materials. These membrane composites, derived from MOFs, exhibit remarkable characteristics including enhanced porosity, adjustable pore dimensions, superior permeability, optimal conductivity, and robust water stability. Their ability to effectively sequester organic compounds has spurred significant research in this field. This paper introduces methods for enhancing the performance of MOFs and explores their potential applications in water treatment. It delves into the detailed design, synthesis strategies, and fabrication of composite membranes using MOFs. Furthermore, it focuses on the application prospects, challenges, and opportunities associated with MOF composite membranes in water treatment.

Investigating the potential of structurally defective UiO-66 for Sb (V) removal from tailing wastewater

Antimony contamination of tailings from the mining process remain attracted a great amount of concern. In this study, defective UiO-66-X crystal materials are rationally constructed using trifluoroacetic acid and hydrochloric acid as modulators for the removal of Sb(V) from actual tailing sand leachates. XRD and TG characterizations reveal that the number and kind of defects in UiO-66 are influenced by the type of modulators and the addition of trifluoroacetic acid makes UiO-66-TFA contain both cluster and ligand defects. Adsorption experiments show that UiO-66 and UiO-66-HCl achieve 100% removal of Sb(V) at pH 7.5 of the tailing sand leachate, and up to 90% removal of Sb(V) by the three materials at pH 2.5. It is noteworthy that the removal rate of Sb(V) by UiO-66-HCl is still satisfactory even under strongly acidic conditions at pH 0.5, with good potential for practical applications. Four kinetic models are used to fit the adsorption data and the analysis shows that the mechanism of Sb(V) adsorption by three adsorbent is all pseudo-second order and chemisorption acts as an important role in the adsorption process. In addition, the fixed bed adsorption experiments show that the material exhibit good prospects for practical applications.

Recent Advances in Metal-Organic Framework (MOF)-Based Photocatalysts: Design Strategies and Applications in Heavy Metal Control

The heavy metal contamination of water systems has become a major environmental concern worldwide. Photocatalysis using metal-organic frameworks (MOFs) has emerged as a promising approach for heavy metal remediation, owing to the ability of MOFs to fully degrade contaminants through redox reactions that are driven by photogenerated charge carriers. This review provides a comprehensive analysis of recent developments in MOF-based photocatalysts for removing and decontaminating heavy metals from water. The tunable nature of MOFs allows the rational design of composition and features to enhance light harvesting, charge separation, pollutant absorptivity, and photocatalytic activities. Key strategies employed include metal coordination tuning, organic ligand functionalization, heteroatom doping, plasmonic nanoparticle incorporation, defect engineering, and morphology control. The mechanisms involved in the interactions between MOF photocatalysts and heavy metal contaminants are discussed, including light absorption, charge carrier separation, metal ion adsorption, and photocatalytic redox reactions. The review highlights diverse applications of MOF photocatalysts in treating heavy metals such as lead, mercury, chromium, cadmium, silver, arsenic, nickel, etc. in water remediation. Kinetic modeling provides vital insights into the complex interplay between coupled processes such as adsorption and photocatalytic degradation that influence treatment efficiency. Life cycle assessment (LCA) is also crucial for evaluating the sustainability of MOF-based technologies. By elucidating the latest advances, current challenges, and future opportunities, this review provides insights into the potential of MOF-based photocatalysts as a sustainable technology for addressing the critical issue of heavy metal pollution in water systems. Ongoing efforts are needed to address the issues of stability, recyclability, scalable synthesis, and practical reactor engineering.

Co-adsorption and Fenton-like oxidation in the efficient removal of methylene blue by MIL-88B@UiO-66 nanoflowers

Development of binary MOF-on-MOF heterostructures is a research hotspot in MOFs chemistry due to the advantages elicited by a closely connected interface, which may endow more abundant functionality and even broader applications in interface chemistry. A MOF-on-MOF heterostructure was constructed by in situ growth of MIL-88B on the outer surface of UiO-66. The resultant MIL-88B@UiO-66 produced had an interesting flower-like morphology composed of MIL-88B (petal) on tetrahedral UiO-66 (core). The MIL-88B@UiO-66 heterostructure showed adsorption and Fenton-like oxidation abilities, with distinctly improved structural stability in aqueous solution compared with that of single MIL-88B. Methylene blue (MB) was selected as the target molecule to evaluate the adsorption and Fenton-like oxidation activities. The efficiency of total removal of MB was studied systematically under various operating conditions and the influencing factors were optimized. The kinetics of adsorption and catalytic oxidation were simulated to explore the interactions between MB and MIL-88B@UiO-66. The mechanisms of enhanced adsorption and Fenton-like oxidation were suggested. The cyclic removal performance and structural stability of MIL-88B@UiO-66 were also determined.

Enhanced performance of ZIF-8 nanocrystals hybrid monolithic composites via an in-situ growth strategy for efficient capillary microextraction of perfluoroalkyl phosphonic acids

Enrichment of perfluoroalkyl phosphonic acids (PFPAs) is of great significance and challenging for environmental monitoring, due to their toxic and persistent nature, highly fluorinated character as well as low concentration. Herein, novel metal-organic frameworks (MOFs) hybrid monolithic composites were prepared via metal oxide-mediated in situ growth strategy and utilized for capillary microextraction (CME) of PFPAs. A porous pristine monolith was initially obtained by copolymerization of the zinc oxide nanoparticles (ZnO-NPs)-dispersed methacrylic acid (MAA) with ethylenedimethacrylate (EDMA) and dodecafluoroheptyl acrylate (DFA). Afterwards, nanoscale-facilitated transformation of ZnO nanocrystals into the zeolitic imidazolate framework-8 (ZIF-8) nanocrystals was successfully realized via the dissolution-precipitation of the embedded ZnO-NPs in the precursor monolith in the presence of 2-methylimidazole. Experimental and spectroscopic results (SEM, N₂ adsorption-desorption, FT-IR, XPS) revealed that the coating of ZIF-8 nanocrystals significantly increased the surface area of the obtained ZIF-8 hybrid monolith and endowed the material abundant surface-localized unsaturated zinc sites. The proposed adsorbent showed highly enhanced extraction performance for PFPAs in CME, which was mainly ascribed to the strong fluorine affinity, Lewis acid/base complexing, anion-exchange, and weakly π-CF interaction. The coupling of CME with LC-MS enables effective and sensitive analysis of ultra-trace PFPAs in environment water and human serum. The coupling method demonstrated low detection limits (2.16-4.12 ng L^-1) with satisfactory recoveries (82.0-108.0%) and precision (RSDs ≤6.2%). This work offered a versatile route to design and fabricate selective materials for emerging contaminant enrichment in complicated matrices.

Cation-Exchange in Metal-Organic Framework as a Strategy to Obtain New Material for Ascorbic Acid Detection

Ascorbic acid (AA) is an important biomolecule, the deficiency or maladjustment of which is associated with the symptoms of many diseases (e.g., cardiovascular disease or cancer). Therefore, there is a need to develop a fluorescent probe capable of detecting AA in aqueous media. Here, we report the synthesis, structural, and spectroscopic characterization (by means of, e.g., XRD, XPS, IR and Raman spectroscopy, TG, SEM, and EDS analyses), as well as the photoluminescent properties of a metal-organic framework (MOF) based on Cu²⁺ and Eu³⁺ ions. The ion-exchange process of the extraframework cation in anionic Cu-based MOF is proposed as an appropriate strategy to obtain a new material with a nondisturbed structure and a sensitivity to interaction with AA. Accordingly, a novel Eu[Cu₃(μ₃-OH)(μ₃-4-carboxypyrazolato)₃] compound for the selective optical detection of AA with a short detection time of 5 min is described.

Enhancing Interfacial and Electromagnetic Interference Shielding Properties of Carbon Fiber Composites via the Hierarchical Assembly of the MWNT/MOF Interphase

A metal-organic framework (MOF) based on a conjugated organic ligand and a transition-metal ion was designed and used to construct a novel multiwalled carbon nanotube (MWNT)/MOF interphase via hierarchical assembly on the carbon fiber (CF) surface and was compared to various interphases established by MWNT and MOF. An intertwined MWNT and MOF "jujube core" was randomly dispersed on MWNT@CF and MOF@CF surfaces, while interpenetrating structures with the MWNT network and MOF jujube core were simultaneously observed on MWNT/MOF@CF due to coordination bonds and π-π conjugation effects, which were derived from the MWNT template with carboxyl groups and sp²-hybridized domains as well as the secondary growth of MOF to promote self-assembly and the connection of MOF. The transverse fiber bundle test (TFBT) strength and interfacial shear strength (IFSS) of the MWNT/MOF@CF composite were 36.9, 6.1, and 20.8%, 16.3% higher than those of MWNT@CF and MOF@CF composites, which were attributed to the smoothed modulus transition of the stiffening interphase formed by the MWNT/MOF hybrid structure as "armor" to effectively buffer the stress transfer between a carbon fiber and the resin matrix. Compared to MWNT@CF and MOF@CF composites, MWNT/MOF@CF composites had the highest EMI shielding effectiveness, which was attributed to the combined effects of multiple reflections, conductive loss, and interface polarization from the interpenetrating MWNT/MOF hybrid structures, which realized the integration of the structure and function of the carbon fiber composites.

Effective adsorption of cadmium and lead using SO3H-functionalized Zr-MOFs in aqueous medium

Cadmium (Cd) and Lead (Pb) from industrial wastewater can bioaccumulate in the living organisms of water bodies, posing serious threats to human health. Therefore, efficient remediation of heavy metal ions of Cd (II) and Pb (II) in aqueous media is necessary for public health and environmental sustainability. In the present study, water stable Zirconium (Zr) based metal organic frameworks (MOFs) with SO3H functionalization were synthesized by solvothermal method and used first time for the adsorption of Cd (II) and Pb (II). Synthesis of UiO-66-SO3H, nano-sized (<100 nm) MOFs, was confirmed by FTIR, XRD, FESEM and BET. Effects of contact time, pH and temperature were investigated for adsorption of Cd (II) and Pb (II) onto SO3H-functionalized Zr-MOFs. The UiO-66-SO3H displayed notable rejections of 97% and 88% towards Cd (II) and Pb (II), respectively, after 160 min at 25 °C and pH (6) with an initial concentration of 1000 mg/L. Adsorption capacities of Cd (II) and Pb (II) were achieved as 194.9154 (mg/g) and 176.6879 (mg/g), respectively, at an initial concentration of 1000 mg/L. The Pseudo second-order kinetic model fitted well with linear regression (R2) of value 1. The mechanism was confirmed mainly as a chemisorption and coordination interaction between sulfone group (-SO3H) and metal ions Cd (IIa) and Pb (II). These results may support effective adsorption and can be studied further to enrich and recycle other heavy metals from wastewater.

Nanocomposites of Copper Trimesinate and Graphene Oxide as Sorbents for the Solid-Phase Extraction of Organic Dyes

A nanocomposite based on graphene oxide and copper trimesinate was obtained by the in situ method. The samples have permanent porosity and a microporous structure with a large surface area corresponding to the adsorption type I. A study of the adsorption properties of the obtained composites with respect to organic dyes (malachite green, indigo carmine, brilliant green, Rose Bengal, crystal violet) showed that adsorption largely depends on the content of graphene oxide in the composites. The complex is an effective sorbent for the extraction of cationic and neutral organic dyes when the content of graphene oxide in the nanocomposite is 20% of the calculated copper trimesinate due to electrostatic forces of interaction. For anionic dyes, the maximum adsorption is achieved when using a composite containing 5% graphene oxide due to the predominance of physical sorption. Experimental results show that the obtained sorbent can be used for extraction in a wide pH range, illustrating the excellent pH window offered by this adsorbent. Kinetics data were properly fitted with the pseudo-second-order model. Equilibrium data were best correlated with the Freundlich model. The process was endothermic and spontaneous in nature. The composite makes it possible to achieve a maximum sorption of 393 mg/g, which is a sufficiently high value for the absorption of dyes.