Degrading hazardous benzohydroxamic acid in the industrial beneficiation wastewater by dielectric barrier discharge reactor

Constructing 3D flower-like S-scheme N-Bi2O2CO3/g-C3N4 heterojunction with enhanced photocatalytic performance

Mineral processing wastewater contains a lot of organic matter and heavy metal ions, and poor self-degradation ability makes it a key treatment object in environmental treatment. Photocatalysis is a promising technology to efficiently mineralize refractory contaminants from wastewater. In this work, 3D flower-like S-scheme N-Bi2O2CO3/g-C3N4 heterostructures were successfully constructed by hydrothermal method with the auxiliary of ionic liquids. The photocatalytic experiments show that the catalytic activity of heterojunction photocatalysts was significantly higher than that of bare g-C3N4 and N-Bi2O2CO3 for the degradation of two pollutants. NBOC/CN-2 shows the highest photocatalytic performance, and the degradation efficiency of sodium isobutyl xanthate (SIBX) on NBOC/CN-2 is 1.85 and 3 times that of bare g-C3N4 and Bi2O2CO3, respectively. The degradation efficiency of m-Cresol on NBOC/CN-2 is 8.34 and 6.93 times that of bare g-C3N4 and N-Bi2O2CO3, respectively. This significantly enhanced photocatalytic activity is attributed to the formation of flower-like heterojunctions, which can greatly increase the specific surface area and facilitate the separation and migration of photogenerated carriers. Total organic carbon (TOC) experiment proves that the two pollutants are effectively mineralized under the action of the prepared photocatalyst. The degradation path of m-Cresol degradation products was inferred based on the ion fragments. The capture experiment and Nitro-blue tetrazolium (NBT)-•O2- measurement show that superoxide radical plays a major role in photocatalytic degradation. The outstanding stability of the prepared flower-like heterojunction samples was examined by cyclic experiments. The S-scheme charge transfer mechanism has been proposed to explain the boosted activity of the flower-like heterojunction photocatalyst. This work provides a new idea for the design of efficient and stable g-C3N4-based photocatalyst for the photocatalytic degradation of refractory wastewater.

Plasma-microbubble treatment and sustainable agriculture application of diclofenac-contaminated wastewater

The demand for efficient wastewater treatment is becoming increasingly urgent due to the rising threat of pharmaceutical residues in water. As a sustainable advanced oxidation process, cold plasma technology is a promising approach for water treatment. However, the adoption of the technology encounters several challenges, including the low treatment efficiency and the potentially unknown environmental impact. Here, microbubble generation was integrated with cold plasma system to enhance treatment of wastewater contaminated with diclofenac (DCF). The degradation efficiency depended on the discharge voltage, gas flow, initial concentration, and pH value. The best degradation efficiency was 90.9% after 45 min plasma-bubble treatment under the optimum process parameters. The hybrid plasma-bubble system exhibited strongly synergistic performance heralded by up to seven-times higher DCF removal rates than the two systems operated separately. The plasma-bubble treatment remains effective even after addition of SO₄^2-, Cl^-, CO₃^2-, HCO₃^-, and humic acid (HA) as interfering background substances. The contributions of •O₂^-, O₃, •OH, and H₂O₂ reactive species to the DCF degradation process were specified. The synergistic mechanisms for DCF degradation were deduced through the analysis of the degradation intermediates. Further, the plasma-bubble treated water was proven safe and effective to stimulate seed germination and plant growth for sustainable agriculture applications. Overall, these findings provide new insights and a feasible approach with a highly synergistic removal effect for the plasma-enhanced microbubble wastewater treatment, without generating secondary contaminants.

High efficiency and rapid treatment of naproxen sodium wastewater by dielectric barrier discharge coupled with catalysis

Pharmaceutical wastewater has the characteristics of high organic concentration and poor biodegradability, which will cause serious environmental pollution when discharged into water bodies. In this work, naproxen sodium was used to simulate pharmaceutical wastewater by dielectric barrier discharge technology. The effects of dielectric barrier discharge (DBD) and combined catalysis on the removal of naproxen sodium solution were studied. The removal effect of naproxen sodium was affected by discharge conditions, including discharge voltage, frequency, air flow rate and electrode materials. It was found that the highest removal rate of naproxen sodium solution was 98.5%, when the discharge voltage was 7000 V, the frequency was 3333 Hz, and the air flow rate was 0.3 m³/h. In addition, the effect of the initial conditions of naproxen sodium solution was studied. The removal of naproxen sodium was relatively effective at low initial concentrations as well as under the condition of weak acid or near-neutral solution. However, the initial conductivity of naproxen sodium solution had little effect on the removal rate. The removal effect of naproxen sodium solution was compared by using catalyst combined with DBD plasma and DBD plasma alone. x%La/Al₂O₃, Mn/Al₂O₃ and Co/Al₂O₃ catalysts were added. The removal rate of naproxen sodium solution reached the highest after adding 14%La/Al₂O₃ catalyst, which played the best synergistic effect. The removal rate of naproxen sodium was 18.4% higher than that without catalyst. The results showed that the combination of DBD and La/Al₂O₃ catalyst may be a promising method to remove naproxen sodium efficiently and quickly. And this method is a new attempt to treat naproxen sodium.

Advances of non-thermal plasma discharge technology in degrading recalcitrant wastewater pollutants. A comprehensive review

With development and urbanization, the amount of wastewater generated due to human activities drastically increases yearly, causing water pollution and intensifying the already worsened water crisis. Although convenient, conventional wastewater treatment methods such as activated sludge, stabilization ponds, and adsorption techniques cannot fully eradicate the complex and recalcitrant contaminants leading to toxic byproducts generation. Recent advancements in wastewater treatment techniques, specifically non-thermal plasma technology, have been extensively investigated for the degradation of complex pollutants in wastewater. Non-thermal plasma is an effective alternative for degrading and augmenting the biodegradability of recalcitrant pollutants due to its ability to generate reactive species in situ. This article critically reviews the non-thermal plasma technology, considering the plasma discharge configuration and reactor types. Furthermore, the influence of operational parameters on the efficiency of the plasma systems and the reactive species generated by the system during discharge has gained significant interest and hence been discussed. Also, the application of non-thermal plasma technology for the degradation of pharmaceuticals, pesticides, and dyes and the inactivation of microbial activities are outlined in this review article. Additionally, optimistic applications involving the combination of non-thermal plasma and catalysts and pilot and industrial-scale projects utilizing non-thermal plasma technology have been addressed. Concluding perceptions on the challenges and future perspectives of the non-thermal technology on wastewater treatment are accentuated. Overall, this review outlines a comprehensive understanding of the non-thermal plasma technology for recalcitrant pollutant degradation from a scientific perspective providing detailed instances for reference.

A novel multi-components hierarchical porous composite prepared from solid wastes for benzohydroxamic acid degradation

In this study, a novel carbon-wrapped-iron hierarchical porous catalyst (Fe/C-Mn₈₀₀) was prepared from electrolytic manganese residue (EMR) and sewage sludge (SS), which showed outstanding degradation ability toward benzohydroxamic acid (BHA, nearly 90 % was removed within 60 min) with low metal leaching rate. Mechanism exploration found transition metal ions (Fe and Mn) can serve as electron acceptors and facilitate the generation of persistent free radicals (PFRs). These transition metal ions and PFRs mainly participated in the single-electron pathway via activating PMS to generate a large amount of reactive oxygen species (ROS). While the electron negative graphitic N and CO groups not only improve the electronegatively of catalyst, but also acted as the electron sacrificers to favor the electron transfer and directly oxidized the absorbed BHA through the ternary activated outer-sphere complexes. Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) analysis further demonstrated the crucial role of pre-adsorption during the degradation process. This work provided a deep insight into the degradation mechanism of metal/carbon composite and promising opportunity widened the horizon of the high-value utilization of EMR and SS.