Charge transfer uplift in dye-sensitized solar cells using fibrous nanocrystals of platinum-based bimetallic counter electrodes

Iridium-palladium binary alloy as a counter electrode in dye-sensitized solar cells

This study is concerned with the iridium-palladium (Ir-Pd) binary alloy as a counter electrode (CE) for DSSC. The CE was prepared using the liquid phase deposition (LPD) technique. The influence of the concentration of hydrogen hexachloroiridate(IV) hydrate (H2Cl6Ir·H2O) on the properties and the performance of the device was investigated. The source of iridium was H2Cl6Ir·H2O. XRD analysis confirmed that the dominant phase of Ir-Pd existed in the sample. The grain size of Ir-Pd increased with the increase in the concentration of H2Cl6Ir·H2O until an optimum concentration of 0.7 mM was reached. The % wt of Ir was found to increase with the concentration of H2Cl6Ir·H2O. The device utilizing Ir-Pd CE with 0.7 mM H2Cl6Ir·H2O demonstrated the highest power conversion efficiency (PCE) of 5.84%, beating that of the device with Pt CE having a PCE of 5.04%. This is because the device possesses the lowest charge transfer resistance (Rct), highest recombination resistance (Rcr), and longest carrier lifetime (τ), and the device possesses the highest reduction current (Jpc) and incident-photon conversion efficiency (IPCE). The PCE was significantly affected by Ir content in the binary alloy of Ir-Pd. According to the PCE result, Ir-Pd CE was found as a suitable substitution for Pt as CE for the device.

A Novel Dye-Sensitized Solar Cell Structure Based on Metal Photoanode without FTO/ITO

Traditional dye-sensitized solar cells (DSSC) use FTO/ITO containing expensive rare elements as electrodes, which are difficult to meet the requirements of flexibility. A new type of flexible DSSC structure with all-metal electrodes without rare elements is proposed in this paper. Firstly, a light-receiving layer was prepared outside the metal photoanode with small holes to realize the continuous oxidation-reduction reaction in the electrolyte; Secondly, the processing technology of the porous titanium dioxide (TiO₂) film was analyzed. By testing the J–V characteristics, it was found that the performance is better when the heating rate is slow. Finally, the effects of different electrode material combinations were compared through experiments. Our results imply that in the case of all stainless-steel electrodes, the open-circuit voltage can reach 0.73 V, and in the case of a titanium photoanode, the photoelectric conversion efficiency can reach 3.86%.