Comparison of different permanent chemical modifiers for lead determination in Orujo spirits by electrothermal atomic absorption spectrometry

Study of the mechanism of embolism removal in xylem vessels by using microfluidic devices

Determining the mechanism that effects embolism repair in the xylem vessels of plants is of great significance in predicting plant distribution and the screening of drought-resistant plants. However, the mechanism of perforation plates of xylem vessels in the acceleration of embolism repair is still not clear by using conventional methods of anatomy and visualization technology. Microfluidic devices have shown their ability to simulate physiological environments and conduct quantitative experiments. This work proposes a biomimetic microfluidic device to study the mechanism of perforation plates of xylem vessels in the acceleration of embolism repair. The results proffered that the perforation plates increase the rate of embolism removal by increasing the pressure differential through the vessel, and the rate of embolism removal is related to the structural parameters of the perforation plate. A combination of the perforation size, the vessel diameter and the perforation plate angle can be optimised to generate higher pressure differentials, which can accelerate the process of embolism repair. This work provides a new method for studying the mechanism of microstructures of natural plants. Furthermore, the mechanism that perforation plates accelerate embolism repair was applied to an electrochemical flow sensor for online determination of heavy metal ions. Test results of this application indicate that the mechanism can be applied in the engineering field to solve the problems of reduced sensitivity of devices, inaccuracy of analysis results and poor reaction performance caused by bubbles that are generated or introduced easily in microdevices, which paves the way for applying the theory to engineering.

A Review of Microfluidic Detection Strategies for Heavy Metals in Water

Heavy metal pollution of water has become a global issue and is especially problematic in some developing countries. Heavy metals are toxic to living organisms, even at very low concentrations. Therefore, effective and reliable heavy metal detection in environmental water is very important. Current laboratory-based methods used for analysis of heavy metals in water require sophisticated instrumentation and highly trained technicians, making them unsuitable for routine heavy metal monitoring in the environment. Consequently, there is a growing demand for autonomous detection systems that could perform in situ or point-of-use measurements. Microfluidic detection systems, which are defined by their small size, have many characteristics that make them suitable for environmental analysis. Some of these advantages include portability, high sample throughput, reduced reagent consumption and waste generation, and reduced production cost. This review focusses on developments in the application of microfluidic detection systems to heavy metal detection in water. Microfluidic detection strategies based on optical techniques, electrochemical techniques, and quartz crystal microbalance are discussed.

Lead contamination of fruit spirits intended for own consumption as a potential overlooked public health issue? A pilot study

OBJECTIVE

The aim of the study was to analyse the occurrence of lead in selected samples of fruit distilled spirits for own consumptions in terms of possible contribution to the occurrence of alcohol-attributable diseases.

METHODS

In a pilot study, we analysed 18 samples of fruit spirits for own consumption. Most of the samples were distilled in the local growing distilleries in the Žilina Region with exception of 3 samples collected in the Trnava Region (one of them was of Hungarian origin). Sample preparation included previous mineralization with use of microwave decomposition system Multiwave 60 50 Hz. The samples were analysed by atomic absorption spectroscopy with graphic furnace (AAS GBC XplorAA 5000 with GF 5000).

RESULTS

The average ethanol level in our samples was higher in comparison with distributed spirits. We detected lead in all samples. In two of them the concentration was lower than the limit of quantitation (LOQ). The highest lead concentrations were observed in plum spirit from Hungary (581.0 μg/l), and in grape spirit made in the Trnava Region (466.3 μg/l).

CONCLUSIONS

Lead is a widespread contaminant of fruit spirits prepared for own consumption. Taking into consideration its common occurrence and possible multiplicative effect with ethanol, we can assume that lead can contribute to the occurrence of several alcohol-attributable chronic diseases. Due to the insufficient information in this field, our results provide significant insight into the issue and present an important starting point for further research.

Application of zirconium-iridium permanent modifier for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry

A novel and robust method for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry was developed, using zirconium-iridium coating as permanent modifier (140 μg Zr and 4 μg Ir). After 300 atomization cycles, it was necessary to add 2 μg of Ir. Due to the varying concentrations of Pb in atmospheric particulate matter, lead was monitored at two wavelengths, at the less sensitive line of 261.4 nm for high concentration samples (>20 μg L(-1)) or at 283.3 nm for the low concentration samples. Matrix-matched calibration had to be performed for quantitative recoveries (96-102 %). Following this approach, the four elements were determined in atmospheric particulate matter samples from an industrial area near the city of Athens in two different time periods (cold-warm) with limits of detection of 5.5 ng m(-3) for Pb at 261.4 nm and 0.29 ng m(-3) at 283.3 nm, 0.019 ng m(-3) for Cd, 0.14 ng m(-3) for As, and 0.22 ng m(-3) for Ni. Lead, Cd, and As levels were very low, whereas Ni content was at comparable levels with other areas worldwide.

Characterization of monoclonal antibodies for lead-chelate complexes: applications in antibody-based assays

Monoclonal antibodies against lead were generated by immunizing BALB/c mice with lead conjugated to keyhole limpet hemocyanin (KLH) via a bifunctional chelator, S-2-(4-aminobenzyl)diethylenetriamine pentaacetic acid (DTPA). Stable hybridoma cell lines were produced by fusion of murine splenocytes and SP2/0 myeloma cells. One of the hybridomas generated from this fusion (4/7) synthesized and secreted an antibody that bound tightly to Pb2+-DTPA complexes but not to metal-free DTPA. The performance for a competitive inhibition enzyme-linked immunosorbent assay (ELISA) incorporating this antibody was assessed for its sensitivity to changes in pH, ionic strength, and blocking reagents. The cross-reactivities in this ELISA were less than 3% for Fe3+, Cd2+, Hg2+, and Cu2+ and less than 0.3% for Cr3+, Mn2+, Mg2+, In3+, Ag1+, Ni2+, Co2+, Zn2+, Ca2+, Cu1+, and Hg1+. The IC50 value achieved for lead was 2.72 +/- 0.034 microM, showing the detection range of 0.092-87.2 microM and the lowest detection limit of 0.056 +/- 0.005 microM. Recoveries from the analyte-fortified tap water and ultrapure water were in the range of 80-114% . These results indicate that the ELISA could be a convenient analytical tool for monitoring lead residues in drinking water.