Classification of biodiesel using NIR spectrometry and multivariate techniques

Structural discrimination of nanosilica particles and mixed-structure silica by multivariate analysis applied to SAXS profiles in combination with FT-IR spectroscopy

New methodology to quickly identify changes in the structural properties of mesoporous silica materials through simultaneous multivariate analyses applied to techniques with different principles as SAXS curves and FT-IR spectra.

Digital image-based classification of biodiesel

This work proposes a simple, rapid, inexpensive, and non-destructive methodology based on digital images and pattern recognition techniques for classification of biodiesel according to oil type (cottonseed, sunflower, corn, or soybean). For this, differing color histograms in RGB (extracted from digital images), HSI, Grayscale channels, and their combinations were used as analytical information, which was then statistically evaluated using Soft Independent Modeling by Class Analogy (SIMCA), Partial Least Squares Discriminant Analysis (PLS-DA), and variable selection using the Successive Projections Algorithm associated with Linear Discriminant Analysis (SPA-LDA). Despite good performances by the SIMCA and PLS-DA classification models, SPA-LDA provided better results (up to 95% for all approaches) in terms of accuracy, sensitivity, and specificity for both the training and test sets. The variables selected Successive Projections Algorithm clearly contained the information necessary for biodiesel type classification. This is important since a product may exhibit different properties, depending on the feedstock used. Such variations directly influence the quality, and consequently the price. Moreover, intrinsic advantages such as quick analysis, requiring no reagents, and a noteworthy reduction (the avoidance of chemical characterization) of waste generation, all contribute towards the primary objective of green chemistry.

Using FTIR spectra and pattern recognition for discrimination of tea varieties

In order to classify typical Chinese tea varieties, Fourier transform infrared spectroscopy (FTIR) of tea polysaccharides (TPS) was used as an accurate and economical method. Partial least squares (PLS) modeling method along with a self-organizing map (SOM) neural network method was utilized due to the diversity and heterozygosis between teas. FTIR spectra results of tea extracts after spectra preprocessing were used as input data for PLS and SOM multivariate statistical analyses respectively. The predicted correlation coefficient of optimization PLS model was 0.9994, and root mean square error of calibration and cross-validation (RMSECV) was 0.03285. The features of PLS can be visualized in principal component (PC) space, contributing to discover correlation between different classes of spectra samples. After that, a data matrix consisted of the scores on the selected 3PCs computed by principle component analysis (PCA) and the characteristic spectrum data was used as inputs for training of SOM neural network. Compared with the PLS linear technique's recognition rate of 67% only, the correct recognition rate of the PLS-SOM as a non-linear classification algorithm to differentiate types of tea reaches up to 100%. And the models become reliable and provide a reasonable clustering of tea varieties.

Fourier transform infrared spectroscopy (FTIR) and multivariate analysis for identification of different vegetable oils used in biodiesel production

The main objective of this study was to use infrared spectroscopy to identify vegetable oils used as raw material for biodiesel production and apply multivariate analysis to the data. Six different vegetable oil sources—canola, cotton, corn, palm, sunflower and soybeans—were used to produce biodiesel batches. The spectra were acquired by Fourier transform infrared spectroscopy using a universal attenuated total reflectance sensor (FTIR-UATR). For the multivariate analysis principal component analysis (PCA), hierarchical cluster analysis (HCA), interval principal component analysis (iPCA) and soft independent modeling of class analogy (SIMCA) were used. The results indicate that is possible to develop a methodology to identify vegetable oils used as raw material in the production of biodiesel by FTIR-UATR applying multivariate analysis. It was also observed that the iPCA found the best spectral range for separation of biodiesel batches using FTIR-UATR data, and with this result, the SIMCA method classified 100% of the soybean biodiesel samples.

A rapid and accurate method for on-line measurement of straw-coal blends using near infrared spectroscopy

On-line measurement of biomass-coal blends is very important for developing appropriate subsidy policies for biomass co-firing power generation. Near infrared reflectance spectroscopy (NIRS) was used for on-line qualitative analysis of straw, coal and straw-coal blends and on-line quantitative analysis of straw content of straw-coal blends. A total of 80 straw samples, nine coal samples, 120 straw-coal blends samples with straw content from 70% to 99% (blends1) and 120 straw-coal blends samples with straw content from 1% to 30% (blends2) were prepared. Spectra were obtained using a Thermo Fisher Scientific Antaris Target FT-NIR spectrometer. Linear discriminant analysis method was used for qualitative analysis, correct classification percentages of straw, blends1, blends2 and coal were 89.87%, 79.66%, 94.92% and 100%, respectively. The ratio of standard error of performance to standard deviation (RPD) of quantitative analysis model was 3.52. It is concluded NIRS is a rapid and accurate method for on-line measurement of straw-coal blends.

Variable selection in near-infrared spectroscopy: benchmarking of feature selection methods on biodiesel data

During the past several years, near-infrared (near-IR/NIR) spectroscopy has increasingly been adopted as an analytical tool in various fields from petroleum to biomedical sectors. The NIR spectrum (above 4000 cm(-1)) of a sample is typically measured by modern instruments at a few hundred of wavelengths. Recently, considerable effort has been directed towards developing procedures to identify variables (wavelengths) that contribute useful information. Variable selection (VS) or feature selection, also called frequency selection or wavelength selection, is a critical step in data analysis for vibrational spectroscopy (infrared, Raman, or NIRS). In this paper, we compare the performance of 16 different feature selection methods for the prediction of properties of biodiesel fuel, including density, viscosity, methanol content, and water concentration. The feature selection algorithms tested include stepwise multiple linear regression (MLR-step), interval partial least squares regression (iPLS), backward iPLS (BiPLS), forward iPLS (FiPLS), moving window partial least squares regression (MWPLS), (modified) changeable size moving window partial least squares (CSMWPLS/MCSMWPLSR), searching combination moving window partial least squares (SCMWPLS), successive projections algorithm (SPA), uninformative variable elimination (UVE, including UVE-SPA), simulated annealing (SA), back-propagation artificial neural networks (BP-ANN), Kohonen artificial neural network (K-ANN), and genetic algorithms (GAs, including GA-iPLS). Two linear techniques for calibration model building, namely multiple linear regression (MLR) and partial least squares regression/projection to latent structures (PLS/PLSR), are used for the evaluation of biofuel properties. A comparison with a non-linear calibration model, artificial neural networks (ANN-MLP), is also provided. Discussion of gasoline, ethanol-gasoline (bioethanol), and diesel fuel data is presented. The results of other spectroscopic techniques application, such as Raman, ultraviolet-visible (UV-vis), or nuclear magnetic resonance (NMR) spectroscopies, can be greatly improved by an appropriate feature selection choice.