Disposable immunosensor for human cytomegalovirus glycoprotein B detection

Silver nanoparticles in electrochemical immunosensing and the emergence of silver-gold galvanic exchange detection

Nanoparticle-based electrochemical immunosensors demonstrate high sensitivity toward biomarker detection due to the large surface area of the nanoparticles and their ability to amplify the signal of the target molecule. Additionally, they have a fast response time, relatively lower cost, and can be easily miniaturized for point-of-care applications. Among noble metals, silver nanoparticles (AgNPs) have been extensively used in electrochemical sensors due to their unique properties, such as catalytic activity and excellent electrical conductivity. This Feature Article describes six approaches for incorporating AgNPs in electrochemical platforms, featuring the most recent developments in the silver-gold galvanic exchange-based detection strategy. With a few exceptions, many of these detection methods use AgNP oxidation into Ag+ ions, followed by electrodeposition of Ag+ ions onto the working electrode as zero-valent Ag metal and a final stripping step using a voltammetric technique. Combining these steps provides desirable low detection limits and good sensitivity for various biomarkers. A few other methods involved the reduction of Ag+ ions and depositing them as Ag metal onto the electrode using a reagent mixture so that the striping analysis could be performed. Typically, this reagent mixture includes Ag+ ions, a reducing agent, or an enzyme substrate. Besides, AgNPs have also been directly used to modify the surface of electrodes to facilitate kinetically favored redox-mediated electrochemical reactions. In addition to Ag detection methods, this report will also provide recent examples to illustrate how the size and shape of AgNPs impact the detection limits and sensitivity of an electrochemical assay. Finally, we discuss recent developments in lab-on-a-chip type immunosensors designed explicitly for Ag-based metalloimmunoassay detection, and we envision that this article will provide a comprehensive summary of the operational principles and new insights into such immunoassay systems.

Microelectromechanical system-based biosensor for label-free detection of human cytomegalovirus

The human cytomegalovirus (HCMV) is an asymptomatic common virus that is typically harmless, but in some cases, it can be life threatening. Thus, there is an urgent need to develop novel diagnostic methods and strengthen the efforts to combat this virus. A microcantilever-based biosensor functionalised with the UL83-antibody of HCMV (UL83-HCMV antibody) has been developed to detect the UL83-antigen of HCMV (UL83-HCMV antigen) at different concentrations ranging from 0.3 to 300 ng/ml. The response of the biosensor to the presence of UL83-HCMV antigen was measured through the shift in resonance frequency before and after antigen-antibody binding. The system shows a low detection limit of 84 pg/ml, which is comparable to traditional sensors, and a detection time of less than 15 min was achieved. The selectivity of the sensor was demonstrated using three different proteins with and without the UL83-HCMV antigen. The biosensor shows high selectivity for the UL83-HCMV antigen. Mass loading by the UL83-HCMV antigen was roughly estimated with a sensitivity of ∼30 fg/Hz. This technique is crucial for the fabrication of portable and low-cost biosensors that can be used in real-time monitoring and enables early medical diagnosis.

Nanoparticle Reservoirs for Paper-Only Immunosensors

Biosensors made entirely of paper are becoming increasingly popular due to their low cost, facile fabrication, and lightweight portability for in-field measurements. However, it is difficult to store nanoparticles in paper substrates without irreversibly binding them to the cellulose matrix. This makes it challenging to fabricate biosensors incorporating nanoparticle probes in paper-based reservoirs. Here, we overcome this limitation with a new method for storing protein-decorated nanoparticles on paper substrates that also allows to release them on demand. It consists of spotting nanoparticles onto pieces of filter paper previously modified with polystyrene sulfonate. Gold nanoparticles modified with avidin or antibodies can be easily transferred from the dry reservoir to a receiving wet piece of paper by simply pressing with the finger or a clamp. Paper-based immunosensors incorporating the reservoir enabled the detection of glycoprotein B from human cytomegalovirus in serum with a limit of detection of 0.03 ng mL^-1 and a total assay time of only 12 min. The low limit of detection obtained with a short assay time along with the long shelf-life of the reservoirs make the proposed paper-only biosensors ideal of point-of-care diagnostics.

Nanotextured Surface on Flexographic Printed ZnO Thin Films for Low-Cost Non-Faradaic Biosensors

In this work, the formation of a nanotextured surface is reported on flexographic printed zinc oxide thin films which provide an excellent platform for low-cost, highly sensitive biosensing applications. The ability to produce nanotextured surfaces using a high-throughput, roll-to-roll production method directly from precursor ink without any complicated processes is commercially attractive for biosensors that are suitable for large-scale screening of diseases at low cost. The zinc oxide thin film was formed by printing a zinc acetate precursor ink solution and annealing at 300 °C. An intricate nanotexturing of the film surface was achieved through 150 °C drying process between multiple prints. These surface nanostructures were found to be in the range of 100 to 700 nm in length with a width of 58 ± 18 nm and a height of between 20 and 60 nm. Such structures significantly increase the surface area to volume ratio of the biosensing material, which is essential to high sensitivity detection of diseases. Nonfaradaic electrochemical impedance spectroscopy measurements were carried out to detect the pp65-antigen of the human cytomegalovirus using the printed device, which has a low limit of detection of 5 pg/mL.

Recent Progress in Electrochemical Biosensors for Glycoproteins

This review provides an overview of recent progress in the development of electrochemical biosensors for glycoproteins. Electrochemical glycoprotein sensors are constructed by combining metal and carbon electrodes with glycoprotein-selective binding elements including antibodies, lectin, phenylboronic acid and molecularly imprinted polymers. A recent trend in the preparation of glycoprotein sensors is the successful use of nanomaterials such as graphene, carbon nanotube, and metal nanoparticles. These nanomaterials are extremely useful for improving the sensitivity of glycoprotein sensors. This review focuses mainly on the protocols for the preparation of glycoprotein sensors and the materials used. Recent improvements in glycoprotein sensors are discussed by grouping the sensors into several categories based on the materials used as recognition elements.