One-step synthesis of fluorescent carbon dots for sensitive and selective detection of hyperin

Carbon dot-based fluorescent sensors for pharmaceutical detection: Current innovations, challenges, and future prospects

Environmental contamination by pharmaceuticals has become a matter of concern as they are released in sewage systems at trace levels, thus impacting biological systems. Increasing concerns about the low-level occurrence of pharmaceuticals in the environment demands sensitive and selective monitoring. Owing to their high sensitivity and specificity carbon dots (CDs) have emerged as suitable fluorescent sensors. This review discusses the current scenario of the status of pharmaceuticals in the environment, limitations associated with traditional techniques employed for their detection, and benefits offered by CDs like easy surface modification and tunable optical properties for sensing applications. Several representative means by which CDs interact with other molecules such as inner filter effect (IFE), dynamic quenching (DQ), static quenching (SQ), Förster resonance energy transfer (FRET), among others, are also discussed along with co-referencing fluorophores to design sensors. Based on developments described herein, CDs-based sensors can be expected to sense pharmaceuticals ranging from nanogram to picogram, target real-time industrial and spiked sample analysis, etc., which provides direction for future research.

Selective determination of ellagic acid in aqueous solution using blue-green emissive copper nanoclusters

Development of beneficial sensors to analyze ellagic acid concentrations is of great importance for food safety and human health. Herein, a facile and fast fluorescent probe was carried out for the excellently selective and sensitive measurement of ellagic acid in real samples through histidine protected copper nanoclusters (histidine@Cu NCs) as a nanosensor. This as-developed histidine@Cu NCs were performed through UV-vis absorption spectroscopy, fluorescence spectroscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy and fluorescence lifetime analysis. The TEM image revealed that this nanomaterial had spherical features with the average diameter of 2.5 ± 0.05 nm. The blue-green fluorescence of this Cu NCs was found under the UV light. Meanwhile, the maximum excitation and emission wavelength were located at 387 nm and 488 nm. After addition of ellagic acid, the fluorescence of histidine@Cu NCs was slowly weakened with excellent linear range of 0.5-300 μM and detection limit of 0.077 μM. The fluorescence weakening mechanism of this nanosensor were attributed to the inner filter effect (IFE) and static quenching. Finally, this as-established analysis platform was successfully employed to measure ellagic acid in real samples.

Complementary and Alternative Medicine for Premature Ovarian Insufficiency: A Review of Utilization and Mechanisms

Premature ovarian insufficiency (POI) is defined as a decline in ovarian function before the age of 40 and is one of the leading causes of infertility in women. The etiology is complex, and the pathogenesis is not clear. The main treatment is hormone replacement therapy, but a growing body of data confirms that such treatment can increase the risk of endometrial disease and cardiovascular disease. Complementary and alternative medicine (CAM) has been widely used in patients with POI due to its limited adverse reactions and high efficiency. According to literature reports, CAM therapy for POI mainly includes traditional Chinese medicine, acupuncture, psychotherapy, dietary supplements, and exercise therapy. This article reviews the application of CAM in the treatment of POI and attempts to determine the therapeutic effects and the mechanisms behind these effects based on existing clinical and experimental studies in order to provide theoretical support for the treatment of POI.

Ratiometric fluorescence sensor for sensitive detection of inorganic phosphate in environmental samples

Fast, simple, and low-cost on-site visualized detection of inorganic phosphate (Pi) is in great demand since phosphate is the major reason of eutrophication. In this work, a ratiometric fluorescent probe composed by green carbon dots (GCDs) and red carbon dots (RCDs) has been established for high-sensitivity and selective sensing of Pi. A trend of color change from red to green is observed for the detection of Pi under ultraviolet light and the detection limit is 0.09 μM in the range of 0 to 55 μM. Fluorescent test paper prepared from the probe solution was successfully applied to semi-quantitative visual detection of Pi in real-world water and soil samples, which shows great real-world application potentials.

General, Metal-free Synthesis of Carbon Nanofiber Assemblies from Plant Oils

We designed a metal-free synthesis of carbon nanofiber based on ketene chemistry using phosphorus pentoxide (P2 O5 ) and vegetable oil. Based on the characterization of intermediates, P2 O5 -oil reaction yielded most possibly alkylketenes, which polymerized into poly(ketene) with abundant enol groups. The enol groups further reacted with P2 O5 , forcing the poly(ketene) to assemble into a nano-sized preassembly structure. Moderate heating transforms these structures into carbonaceaus nanofibers. This approach is applicable to other chemicals with similar structure to vegetable oil. The carbon nanofibers with P-O-C functionalization show relatively high graphitization degree and promising textural properties. The C-O-P environment accounts for 66 at % of the total P and creates a superior thermal stability. As a model application, a CDI system built of a carbon-nanofiber-based electrode countered by an activated carbon-based electrode exhibited exceptional performance.

Ratiometric fluorescence nanoprobe for monitoring of intracellular temperature and tyrosine based on a dual emissive carbon dots/gold nanohybrid

A novel dual-emission nitrogen doped carbon dots/gold nanohybrid (NCDs-Au) was designed for specific and sensitive ratiometric detection of intracellular temperature and tyrosine. In this probe, a reductive NCDs was successfully prepared with the use of natural biomass Dendrobium officinale as precursor. The new prepared NCDs acted as both reducers and stabilizers to synthesize a novel NCDs-Au nanohybrid by a facile one-step procedure along with a quantum yield of 14.3%. The prepared nanoprobe showed characteristic fluorescence emissions of NCDs and Au NCs with single-wavelength excitation. Notably, the nanoprobe shows an interesting wavelength-dependent dual response to temperature (448 nm) and tyrosine (660 nm), enabling the two targets to be detected proportionally. As an effective temperature sensor, the nanoprobe exhibited good temperature-dependent fluorescence with a sensational linear response from 5 to 75 °C. In addition, the sensor has a linear response toward tyrosine in the range of 0.5-175 μM with a detection limit of 0.19 μM. Moreover, the fluorescent nanoprobe was successfully applied to ratiometricly monitor the variation of temperature or tyrosine level in cells because of the low cytotoxicity, chemical stability and excellent fluorescence properties. These results suggested that the nanoprobe here has provided the possibility for rapidly biosensing with the acceptable selectivity and sensitivity.

N, S, I co-doped carbon dots for folic acid and temperature sensing and applied to cellular imaging

The application of fluorescent carbon dots in bio-imaging has huge positive significance in the field of biomedicine. By taking this advantage, herein we prepared nitrogen, sulfur and iodine doped carbon dots (N,S,I-CDs) by a facile hydrothermal reaction using C₃N₃S₃, potassium iodate (KIO₃) and ethylenediamine (EDA), and the obtained N,S,I-CDs show bright blue fluorescence with a high fluorescence quantum yield of about 32.4%. The prepared N, S, I-CDs could interact with the folic acid (FA) with high selectivity, lead to development of a high sensitive method for the FA detection from 0.1 to 175 μM wide linear range with a detection limit of 84 nM (S/N = 3) and also applied them in U-2 OS cells imaging. Moreover, this sensor possessed a good sensitivity, linearity and reversibility in the temperature range of 10-80 °C, and successfully applied for the temperature sensing in cell HT-29 samples. This investigation illustrates that as-prepared N, S, I-CDs probe may have great potential as a high-performance platform for the accurate recognition of temperature in cells and could provide a new tool for the detection of FA in cells.

Recent Advances in Functionalized Carbon Dots toward the Design of Efficient Materials for Sensing and Catalysis Applications

Since the past decade, enormous research efforts have been devoted to the detection/degradation and quantification of environmental toxic pollutants and biologically important molecules due to their ubiquitous necessity in the fields of environmental protection and human health. These fields of sensor and catalysis are advanced to a new era after emerging of nanomaterials, especially, carbon nanomaterials including graphene, carbon nanotube, carbon dots (C-dots), etc. Among them, the C-dots in the carbon family are rapidly boosted in the aspect of synthesis and application due to their superior properties of chemical and photostability, highly fluorescent with tunable, non/low-toxicity, and biocompatibility. The C-dot-based functional materials have shown great potential in sensor and catalysis fields for the detection/degradation of environmental pollutants. The major advantage of C-dots is that they can be easily prepared from numerous biomass/waste materials which are inexpensive and environment-friendly and are suitable for a developing trend of sustainable materials. This review is devoted to the recent development (since 2017) in the synthesis of biomass- and chemical-derived C-dots as well as diverse functionalization of C-dots. Their capability as a sensor and catalyst and respective mechanism are summarized. The future perspectives of C-dots are also discussed.

One-step microwave-assisted preparation of oxygen-rich multifunctional carbon quantum dots and their application for Cu2+-curcumin detection

Carbon quantum dots (CQDs), owing to its unique optical properties, have achieved tremendous progress for the detection of different metal ions, organic small molecules, macromolecules, etc. Here we synthesized fluorescent CQDs by a simple one-step microwave-assisted method using 3,4-Dihydroxy-l-phenylalanine (levodopa) as the carbon resource. The CQDs proved to be a multifunctional probe which can be used for detection of various species including copper ion, biothiols and curcumin, via different mechanisms. The selective detection of copper ion was obtained by fluorescence quenching and the mechanism was proved to be static quenching by electrostatic interaction. The fluorescence of levoCQDs-Cu²⁺ system can be recovered by biothiols (GSH, Cys and Hcy), implying levoCQDs-Cu²⁺ system can also be applied for biothiols detection. The excitation spectrum of levoCQDs had a good overlap with the absorption peak of curcumin, making it as a suitable curcumin probe by fluorescence quenching via inner filter effect (IFE). Furthermore, the levoCQDs can also track the formation of Cu²⁺-Curcumin complexes by restoring the fluorescence of the CQDs in levoCQDs and Cu²⁺-Curcumin system, and this feature may be exploited in the mechanism study of Cu²⁺-Curcumin in the treatment of Alzheimer's disease. The fluorescent levoCQDs were finally used for Cu²⁺ and curcumin detection in some real samples including different types of environmental water samples and human serum samples, providing a convenient strategy to monitor Cu²⁺and curcumin in environmental and biological samples.

Carbon Dots Green Synthesis for Ultra-Trace Determination of Ceftriaxone Using Response Surface Methodology

The present study sought to develop a facile and green synthetic approach for producing fluorescent carbon dots (CDs) from a natural biomass using aqueous extraction of carbonized blue crab shell. Spherical carbon dots (6.00 ± 3.0 nm) exhibited an extended emission range with excellent quantum yield (14.5 ± 3.5%). In order to measure ceftriaxone, we offered a simple and sensitive method, based on fluorescence quenching of carbon dots in plasma and water with recovery values of 94.5-104.1%. Furthermore, with usage of central composite design (CCD) based response surface methodology (RSM); we optimized the effect of different factors. In addition, ANOVA evaluated the accuracy and suitability of quadratic model. Under optimal conditions, fluorescence quenching revealed a sensitive response in the concentration range of 20-1000 nM with the limit of detection 9.0 nM for ceftriaxone. Finally, carbon dots-based fluorescence quenching procedure was able to quantify ceftriaxone in plasma, as well as mineral and tap water. Spiked samples achieved satisfactory efficiencies.