Sensitive detection of bisphenol A by coupling solid phase microextraction based on monolayer graphene-coated Ag nanoparticles on Si fibers to surface enhanced Raman spectroscopy

Sensitive and rapid detection of bisphenol A using signal amplification nanoparticles loaded with anti-bisphenol A monoclonal antibody

Bisphenol A has been reported to be a ubiquitous contaminant, and exposure to this compound can lead to adverse effects in human health. In the study, monoclonal antibody against BPA (anti-BPA mAb) with high affinity (3.74 × 109 L/mol) secreted by cell line 2E3 was successfully screened. Inspired by the signal amplification of nanoparticles, anti-BPA mAbs were labeled with nano-materials including colloidal gold (AuNP) and gold nanoflowers (AuNF) for preparation of immunoprobes and AuNP-/AuNF-based test strips. The developed AuNP- and AuNF-based test strips achieved the rapid and sensitive detection of BPA within 10 min, with the limit of detection (LOD) of 25 μg/mL and 3.125 μg/mL, respectively. The detection result in BPA spiked samples measured by the proposed methods was consistent with that detected by LC-MS method. The preparation process of as-prepared test strip is time-saving and considered as ideal candidates method for rapid screening BPA in real samples.

Composite membrane of graphene oxide and gold nanoparticles functionalized S fiber taper aptasensor for highly sensitive bisphenol A detection

The S fiber taper (SFT) aptasensor with a composite sensitive membrane of graphene oxide and gold nanoparticles was proposed for the rapid and highly sensitive detection of bisphenol A (BPA). The SFT was obtained using a fusion splicer; subsequently, the composite film was deposited on its surface, and the specific aptamer was covalently bonded to the surface of gold nanoparticles. The detection mechanism relies on monitoring changes in the external refractive index induced by the specific binding of BPA to the aptamer. The developed SFT aptasensor exhibited a remarkable sensitivity of 15.5 nm/nM and a limit of detection as low as 0.01 nM for BPA. These findings highlight the aptasensor's potential for diverse monitoring applications.

β-Bi2O3 Nanosheets Functionalized with Bisphenol A Synthetic Receptors: A Novel Material for Sensitive Photoelectrochemical Platform Construction

In this study, β-Bi₂O₃ nanosheets functionalized with bisphenol A (BPA) synthetic receptors were developed by a simple molecular imprinting technology and applied as the photoelectric active material for the construction of a BPA photoelectrochemical (PEC) sensor. BPA was anchored on the surface of β-Bi₂O₃ nanosheets via the self-polymerization of dopamine monomer in the presence of a BPA template. After the elution of BPA, the BPA molecular imprinted polymer (BPA synthetic receptors)-functionalized β-Bi₂O₃ nanosheets (MIP/β-Bi₂O₃) were obtained. Scanning electron microscopy (SEM) of MIP/β-Bi₂O₃ revealed that the surface of β-Bi₂O₃ nanosheets was covered with spherical particles, indicating the successful polymerization of the BPA imprinted layer. Under the best experimental conditions, the PEC sensor response was linearly proportional to the logarithm of BPA concentration in the range of 1.0 nM to 1.0 μM, and the detection limit was 0.179 nM. The method had high stability and good repeatability, and could be applied to the determination of BPA in standard water samples.

Combining thin-film microextraction and surface enhanced Raman spectroscopy to sensitively detect thiram based on 3D silver nanonetworks

By coupling thin-film microextraction (TFME) with surface enhanced Raman scattering (SERS), a facile method was developed for the determination of thiram in the complex matrix (orange juice or grape peel). The substrate of TFME was made by self-assembling silver sol on the silicon wafer to form a three-dimensional (3D) silver nanonetwork structure, without adding any template, which was used for TFME and SERS detection, respectively. The substrate exhibits high reproducibility with a relative standard deviation of about 7.32 % in spot and spot SERS intensity. The SERS signal intensity at a shift of 1384 cm^-1 and the thiram concentration showed good linearity in the range of 0.01-5 µg/L and the linear correlation coefficient was 0.9912. The detection limit for thiram was found to be 0.01 µg/L. The TFME-SERS method was applied for the determination of thiram in fruit juice and the results were obtained very well. Therefore, this method is expected to play a role in the detection of trace pollutants.

Trends in Application of SERS Substrates beyond Ag and Au, and Their Role in Bioanalysis

This article compares the applications of traditional gold and silver-based SERS substrates and less conventional (Pd/Pt, Cu, Al, Si-based) SERS substrates, focusing on sensing, biosensing, and clinical analysis. In recent decades plethora of new biosensing and clinical SERS applications have fueled the search for more cost-effective, scalable, and stable substrates since traditional gold and silver-based substrates are quite expensive, prone to corrosion, contamination and non-specific binding, particularly by S-containing compounds. Following that, we briefly described our experimental experience with Si and Al-based SERS substrates and systematically analyzed the literature on SERS on substrate materials such as Pd/Pt, Cu, Al, and Si. We tabulated and discussed figures of merit such as enhancement factor (EF) and limit of detection (LOD) from analytical applications of these substrates. The results of the comparison showed that Pd/Pt substrates are not practical due to their high cost; Cu-based substrates are less stable and produce lower signal enhancement. Si and Al-based substrates showed promising results, particularly in combination with gold and silver nanostructures since they could produce comparable EFs and LODs as conventional substrates. In addition, their stability and relatively low cost make them viable alternatives for gold and silver-based substrates. Finally, this review highlighted and compared the clinical performance of non-traditional SERS substrates and traditional gold and silver SERS substrates. We discovered that if we take the average sensitivity, specificity, and accuracy of clinical SERS assays reported in the literature, those parameters, particularly accuracy (93-94%), are similar for SERS bioassays on AgNP@Al, Si-based, Au-based, and Ag-based substrates. We hope that this review will encourage research into SERS biosensing on aluminum, silicon, and some other substrates. These Al and Si based substrates may respond efficiently to the major challenges to the SERS practical application. For instance, they may be not only less expensive, e.g., Al foil, but also in some cases more selective and sometimes more reproducible, when compared to gold-only or silver-only based SERS substrates. Overall, it may result in a greater diversity of applicable SERS substrates, allowing for better optimization and selection of the SERS substrate for a specific sensing/biosensing or clinical application.

Flexible nano-cloth-like Ag cluster@rGO with ultrahigh SERS sensitivity for capture-optimization-detection due to effective molecule-substrate interactions

Surface-enhanced Raman scattering (SERS) is a rapid and promising detection technique for trace molecules. A central goal of research in this area is to achieve the highly sensitive detection of molecules built on a systematic understanding of enhancement mechanisms. Herein, we develop a Ag cluster@rGO composite nanostructure, which utilizes strong molecular adsorption to achieve ultrahigh SERS sensitivity. Ag clusters are prepared without additional reducing agents, leaving a low carbon footprint in the fabrication process. Finite-difference time-domain (FDTD) simulations show strong electromagnetic field enhancements generated at the edges and interstices of Ag clusters due to the specificity of their structure. Density Functional Theory (DFT) calculations show that the HOMO-LUMO energy gap value is significantly reduced when Ag cluster@rGO forms a composite system with the target molecule, which enables efficient charge transfer between the substrate and molecules, resulting in charge transfer enhancement. A detection limit of 10^-14 M using our substrate can be achieved for the environmental pollutant dye rhodamine 6G (Rh6G). The detection limits of bisphenol A (BPA) and its derivatives reach nanomolar levels with good signal stability. More importantly, we demonstrate the ability to rapidly screen BPA migration in Chinese Baijiu. Our SERS platform can be further developed for environmental pollution control and food safety.

Sensitive detection of ferbam by coupling solid phase microextraction with surface enhanced Raman spectroscopy based on Au nano-glass capillary

In this study, we developed an innovative approach that combines solid phase microextraction (SPME) with surface-enhanced Raman spectroscopy (SERS) to detect pesticide ferbam rapidly. An Au nano-glass capillary was fabricated by coating template-freely synthesized three-dimensional network Au nanostructures (3D-NW AuNSs) on the roughened surface of glass capillary and used for SPME and SERS respectively. Significant Raman signals were obtained by the SPME-SERS method, followed by detection of ferbam in water and orange juice samples with only 1 min SPME process. Results showed that Au nano-glass capillaries could achieve the detection of ferbam with limit of detection of 0.05 μg/L, and coefficient of determination (R²) of 0.9913. The recovery of predicted results was in the range of 88.46-103.29% and the relative standard deviation (RSD) was 3.5-8.2%. This study demonstrated potential capability of the SPME-SERS method for rapid (within 1 min) and sensitive detection of organic compounds in complex matrices. The SERS-active Au nano-glass capillary is easy to carry and operate, and is expected to play a role in the detection of trace pollutants.

Advanced Optical Sensing of Phenolic Compounds for Environmental Applications

Phenolic compounds are particularly dangerous due to their ability to remain in the environment for a long period of time and their toxic effects. They enter in the environment in different ways, such as waste from paper manufacturing, agriculture (pesticides, insecticides, herbicides), pharmaceuticals, the petrochemical industry, and coal processing. Conventional methods for phenolic compounds detection present some disadvantages, such as cumbersome sample preparation, complex and time-consuming procedures, and need of expensive equipment. Therefore, there is a very large interest in developing sensors and new sensing schemes for fast and easy-to-use methods for detecting and monitoring the phenolic compound concentration in the environment, with special attention to water. Good analytical properties, reliability, and adaptability are required for the developed sensors. The present paper aims at revising the most generally used optical methods for designing and fabricating biosensors and sensors for phenolic compounds. Some selected examples of the most interesting applications of these techniques are also proposed.

Rapid SERS inspection of carcinogenic aromatic amines in textiles by using liquid interfacial assembled Au array

Wide uses of azo dyes produce a great risk of high residuals of carcinogenic aromatic amines, and hence it is important to rapidly analyze these carcinogenic compounds in the textile products to guarantee product safety. In the present work, a surface enhanced Raman spectroscopic (SERS) method was developed for rapid detection of carcinogenic aromatic amines in textiles. In this method, target aromatic amines are extracted from textiles, and then gold nanoparticles are added to the organic extractant, which assemble into closely packed Au array at liquid interface in situ. Finally, fingerprint SERS signals of the target aromatic amines are detected on the generated Au array on the basis of strong chemical interaction between the aromatic amines and the Au surface. The proposed method provided good reproducibility with a relative standard deviation of 3.5% for ten parallel tests of benzidine. It was applied to analyze 70 textile products. To strengthen the spectroscopic data processing, a cluster analysis model was established with 50 samples to automatically identify the spectra based on the good signal reproducibility. The other 20 samples were used as test sets to validate this model. It was found that all the positive samples were successfully identified with false positive rate of 20%. With the addition of the Artificial Intelligence step, the reliability of the discriminant results can be ensured.

Surface-Enhanced Raman Sensing of Semi-Volatile Organic Compounds by Plasmonic Nanostructures

Facile detection of indoor semi-volatile organic compounds (SVOCs) is a critical issue to raise an increasing concern to current researchers, since their emissions have impacted the health of humans, who spend much of their time indoors after the recent incessant COVID-19 pandemic outbreaks. Plasmonic nanomaterial platforms can utilize an electromagnetic field to induce significant Raman signal enhancements of vibrational spectra of pollutant molecules from localized hotspots. Surface-enhanced Raman scattering (SERS) sensing based on functional plasmonic nanostructures has currently emerged as a powerful analytical technique, which is widely adopted for the ultra-sensitive detection of SVOC molecules, including phthalates and polycyclic aromatic hydrocarbons (PAHs) from household chemicals in indoor environments. This concise topical review gives updated recent developments and trends in optical sensors of surface plasmon resonance (SPR) and SERS for effective sensing of SVOCs by functionalization of noble metal nanostructures. Specific features of plasmonic nanomaterials utilized in sensors are evaluated comparatively, including their various sizes and shapes. Novel aptasensors-assisted SERS technology and its potential application are also introduced for selective sensing. The current challenges and perspectives on SERS-based optical sensors using plasmonic nanomaterial platforms and aptasensors are discussed for applying indoor SVOC detection.

Quantitative detection of crystal violet using a surface-enhanced Raman scattering based on a flower-like HAp/Ag nanocomposite

Herein, we proposed a simple one-pot sol-thermal strategy to prepare a highly sensitive and reproducible SERS substrate. The silver-doped hydroxyapatite nanocomposite (HAp/Ag) could suppress the oxidation of silver nanoparticles, which endow the SERS substrate with good stability and reproducibility. Due to the strong interaction between the HAp/Ag substrate and the analytes, a stronger Raman signal generated during the process of SERS detection. In particular, the HAp/Ag substrate enabled the determination of rhodamine 6G (R6G) and crystal violet (CV), and the limits of detection (LOD) were low at 10^-6 M and 10^-5 M, respectively. In addition, the HAp/Ag substrate could be used for the quantitative analysis of CV in wastewater with a good linear relationship between 10^-2 and 10^-5 M. In this context, the HAp/Ag substrate combines the superior properties of both Ag NPs and HAp particles, providing a potential method for monitoring the environment and building a convenient SERS platform to detect pollutants in wastewater.

Surface-Enhanced Raman Spectroscopy for Bisphenols Detection: Toward a Better Understanding of the Analyte-Nanosystem Interactions

Silver nanoparticles functionalized with thiolated β-cyclodextrin (CD-SH) were employed for the detection of bisphenols (BPs) A, B, and S by means of surface-enhanced Raman spectroscopy (SERS). The functionalization of Ag nanoparticles with CD-SH leads to an improvement of the sensitivity of the implemented SERS nanosensor. Using a multivariate analysis of the SERS data, the limit of detection of these compounds was estimated at about 10⁻⁷ M, in the range of the tens of ppb. Structural analysis of the CD-SH/BP complex was performed by density functional theory (DFT) calculations. Theoretical results allowed the assignment of key structural vibrational bands related to ring breathing motions and the inter-ring vibrations and pointed out an external interaction due to four hydrogen bonds between the hydroxyl groups of BP and CD located at the external top of the CD cone. DFT calculations allowed also checking the interaction energies of the different molecular species on the Ag surface and testing the effect of the presence of CD-SH on the BPs’ affinity. These findings were in agreement with the experimental evidences that there is not an actual inclusion of BP inside the CD cavity. The SERS sensor and the analysis procedure of data based on partial least square regression proposed here were tested in a real sample consisting of the detection of BPs in milk extracts to validate the detection performance of the SERS sensor.

Mechanical power driven SPME-SERS ultra-fast detection of illegal additives in aquaculture water

A dual-function (extraction and detection) porous silver fiber with high enhancement effect was constructed based on a convenient electrochemical etching method. The prepared silver fiber not only had high enrichment capacity and good Surface Enhanced Raman Spectroscopy (SERS) performance but also had good laser stability and uniformity. A strategy combining mechanical power and integration of solid phase extraction (SPME) and SERS detection was used. Driven by mechanical power, the analyte malachite green (MG) was enriched on the prepared silver fiber after 40 seconds, which can realize an ultra-fast and sensitive detection with a detection limit of 8.48 × 10-9 M. At the same time, this fiber can be regenerated after being treated with NaBH4. The silver fiber can be used for the detection of MG and CV after being immersed in NaBH4 solution for a few minutes. After 5 cycles of processing, the measurement signals of the silver fiber can reach 70% of the initial signals. The mechanical power driven SPME-SERS (MPD-SPME-SERS) integrated detection method can be used to analyse aquaculture water within 1 minute with a good linear relationship.

Electro-enhanced solid-phase microextraction with covalent organic framework modified stainless steel fiber for efficient adsorption of bisphenol A

In this work, electro-enhanced solid-phase microextraction (EE-SPME) and covalent organic framework (COF) were adopted to improve the extraction efficiency. A conductive COF synthesized of 2,6-diaminoanthraquinone (DQ) and 1,3,5-triformylphloroglucinol (TP) was in situ bonded to the stainless steel wire via facile solution-phase approach and used as the EE-SPME fiber coating to preconcentrate a typical endocrine disruptor bisphenol A (BPA). Compared with conventional SPME, the DQTP bonded fiber coupled with EE-SPME device exhibited higher extraction efficiency and achieved extraction equilibrium within 10 min. The proposed approach based on EE-SPME and gas chromatography coupled with flame ionization detector gave a linear range of 0.05-10 μg mL^-1 and detection limit of 3 μg L^-1 (S/N = 3) with good precision (<6.7%) and reproducibility (<7.1%) spiked with 0.1, 0.5, 1.0 μg mL^-1 BPA. Quantitative determination of BPA in extracts of food packagings (mineral water bottles, milk boxes and milk tea cups) was achieved with recoveries from 88.6 to 118.0%.

Determination of bisphenol A: Old problem, recent creative solutions based on novel materials

Bisphenol A is a synthetic compound widely used in industry, in the production of polycarbonate, epoxy resins, and thermal paper, among others. Its annual production is estimated at millions of tons per year, demonstrating its importance. Despite its wide application in various everyday products, once in the environment (due to its disposal or leaching), it has high toxicity to humans and animal life, and this problem has been well known for years. Given this problem, many researchers seek alternatives for its monitoring in matrices such as natural water, waste, food, and biological matrices. For this, new advanced materials have been developed, characterized, and applied in creative ways for the preparation of samples for the determination of bisphenol A. This article aims to present some of these important and recent applications, describing the use of molecularly imprinted polymers, metal and covalent organic frameworks, ionic liquids and magnetic ionic liquids, and deep eutectic solvents as creative solutions in sample preparation for the long-standing problem of bisphenol A determination.

Combining microextraction methods with surface-enhanced Raman spectroscopy towards more selective and sensitive analyte detection by plasmonic metal nanoparticles

Raman signals of analytes can be enhanced on the surface of noble nanoparticles by generating SERS signals, which can be further enhanced using microextraction (ME) techniques.

Assessment of different isotope dilution strategies and their combination with switchable solvent-based liquid phase microextraction prior to the quantification of bisphenol A at trace levels via GC-MS

Different isotope dilution strategies were evaluated to quantify bisphenol A. High accuracy and precision were achieved by SS-LPME and ID⁴ combination.

Solid-phase microextraction: An appealing alternative for the determination of endogenous substances - A review

The determination of endogenous substances is of great significance for obtaining important biotic information such as biological components, metabolic pathways and disease biomarkers in different living organisms (e.g. plants, insects, animals and humans). However, due to the complex matrix and the trace concentrations of target analytes, the sample preparation procedure is an essential step before the analytes of interest are introduced into a detection instrument. Solid-phase microextraction (SPME), an emerging sample preparation technique that integrates sampling, extraction, concentration, and sample introduction into one step, has gained wide acceptance in various research fields, including in the determination of endogenous compounds. In this review, recent developments and applications of SPME for the determination of endogenous substances over the past five years are summarized. Several aspects, including the design of SPME devices (sampling configuration and coating), applications (in vitro and in vivo sampling), and coupling with emerging instruments (comprehensive two-dimensional gas chromatography (GC × GC), ambient mass spectrometry (AMS) and surface enhanced Raman scattering (SERS)) are involved. Finally, the challenges and opportunities of SPME methods in endogenous substances analysis are also discussed.

A green and facile synthesis for rGO/Ag nanocomposites using one-step chemical co-reduction route at ambient temperature and combined first principles theoretical analyze

Recently, graphene decorated with various inorganic nanoparticles, such as Pt, Au, Ag, TiO₂ and Fe₃O₄, among which Ag nanocomposites are good candidates for electronics, optics, electrochemistry and catalysis. However, preparation techniques for Ag nanoparticles/carbon matrix hybrids require tedious multi-step processes often involving toxic reducing agents/high temperatures which is not viable for scalable production. Here, a facile, one step and eco-friendly chemical co-reduction route was utilized to synthesis of a new nanocomposites by Ag nanoparticle anchored on reduced graphene oxide (rGO) at ambient temperature and combined first principles theoretical analyze their interfacial adsorption behavior, is reported. In this way, graphene oxide (GO) and Ag⁺ simultaneously reduced by thiourea dioxide (TD) without using any additional reduced reactants. Results indicated that GO was successfully reduced to rGO and well-dispersed Ag nanoparticles with sizes of 6-7 nm, anchored on the surface of rGO sheets. Reduction mechanism was attributed to the synergistic effect of its hydrolysis products in aqueous media. The experiment and theoretical calculation results obtained demonstrate this method to be applicable to the synthesis of other metals on rGO sheets in order to improve wettability and interfacial bonding between rGO and metal and may possibly find various forthcoming medicinal, industrial and technological applications.

Braid solid-phase microextraction of polycyclic aromatic hydrocarbons by using fibers coated with silver-based nanomaterials in combination with HPLC with fluorometric detection

Authors propose a novel braid support configuration for use in solid-phase microextraction (SPME) fibers. Two different braided supports (double and triple) were prepared and compared with the conventional single support configuration. Three kinds of silver-based nanomaterials that serve as coatings on these supports are described. They included silver dendrites, silver nanoparticles (AgNPs), and silver dendrites decorated with AgNPs (Ag-dendrites@AgNPs). They were prepared by electrodeposition, a layer-by-layer (LBL) method, and a hybrid strategy, respectively. Fibers were used in the direct-immersion (DI) mode of SPME. Five polycyclic aromatic hydrocarbons (PAHs) were studied as model analytes by DI-SPME when analyzing (spiked) underground waters. PAHs were further determined with high-performance liquid chromatography (HPLC) and fluorescence detection. The analytical performance of the fibers was compared to that of the commercial polydimethylsiloxane (PDMS) fiber of 100 μm thickness. AgNPs obtained by LBL was the best coating and the double braid was the best support configuration. The configuration of the SPME support always played an important role independently on the coating material, being always beneficial the use of double-braids. Despite the low coatings volumes of the silver-based fibers compared to that of PDMS, the analytical features of the method were adequate. Figures of merit include: (a) limits of detection down to 20 ng·L^-1; (b) intra-day, inter-day, and inter-fiber precisions (expressed as RSDs) of <13%, <12%, and < 13%, respectively; and (c) adequate operational lifetime (>60 extractions). Graphical abstract Schematic presentation of braided solid-phase microextraction support configurations together with different silver-based nanomaterials as coatings.

Preparation of polypyrrole/nanosilica composite for solid-phase microextraction of bisphenol and phthalates migrated from containers to eye drops and injection solutions

This paper describes the electrodeposition of polyphosphate-doped polypyrrole/nanosilica nanocomposite coating on steel wire for direct solid-phase microextraction of bisphenol A and five phthalates. We optimized influencing parameters on the extraction efficiency and morphology of the nanocomposite such as deposition potential, concentration of pyrrole and polyphosphate, deposition time and the nanosilica amount. Under the optimized conditions, characterization of the nanocomposite was investigated by scanning electron microscopy and Fourier transform infra-red spectroscopy. Also, the factors related to the solid-phase microextraction method including desorption temperature and time, extraction temperature and time, ionic strength and pH were studied in detail. Subsequently, the proposed method was validated by gas chromatography-mass spectrometry by thermal desorption and acceptable figures of merit were obtained. The linearity of the calibration curves was between 0.01 and 50 ng/mL with acceptable correlation coefficients (0.9956-0.9987) and limits of detection were in the range 0.002-0.01 ng/mL. Relative standard deviations in terms of intra-day and inter-day by five replicate analyses from aqueous solutions containing 0.1 ng/mL of target analytes were in the range 3.3%-5.4% and 5%-7.1%, respectively. Fiber-to-fiber reproducibilities were measured for three different fibers prepared in the same conditions and the results were between 7.3% and 9.8%. Also, extraction recoveries at two different concentrations were ≥96%. Finally, the suitability of the proposed method was demonstrated through its application to the analysis of some eye drops and injection solutions.

An organic-inorganic hybrid silica aerogel prepared by co-precursor method for solid-phase microextraction coating

In order to improve the extraction performance of silica aerogel, an organic-inorganic hybrid silica aerogel was developed as the coating of solid-phase microextraction (SPME). It was prepared via the co-precursor reaction between tris(triethoxysilylpropyl)amine and tetraethyl orthosilicate. Coupled with gas chromatography, the hybrid silica aerogel-coated SPME fiber was evaluated using polycyclic aromatic hydrocarbons (PAHs). Compared to silica aerogel, the hybrid silica aerogel displayed better extraction performance, peak areas of PAH analytes were increased by about 2 times. The affecting parameters including extraction time, extraction temperature, ionic strength, stirring rate and desorption time were optimized, and an analytical method was established with wide linear ranges (0.005-20 μg L^-1, 0.010-20 μg L^-1, 0.100-20 μg L^-1), good correlation coefficients (0.9967-0.9994), low limits of detection (0.001-0.030 μg L^-1) and limits of quantitation (0.005-0.100 μg L^-1). Satisfactory extraction repeatability (RSD≤6.1%, n = 3) and preparation repeatability (RSD ≤ 9.8%, n = 3) were also obtained. Compared to the reported coatings and the commercial coating, the organic-inorganic hybrid silica aerogel has higher or comparable sensitivity, better repeatability, and shorter extraction time and longer service life. The established method was used for the detection of lake water and rain water, and some targets were quantified successfully.