Quenched sandwich-type photoelectrochemical aptasensor for protein detection based on exciton energy transfer

Recent Progresses in Development of Biosensors for Thrombin Detection

Thrombin is a serine protease with an essential role in homeostasis and blood coagulation. During vascular injuries, thrombin is generated from prothrombin, a plasma protein, to polymerize fibrinogen molecules into fibrin filaments. Moreover, thrombin is a potent stimulant for platelet activation, which causes blood clots to prevent bleeding. The rapid and sensitive detection of thrombin is important in biological analysis and clinical diagnosis. Hence, various biosensors for thrombin measurement have been developed. Biosensors are devices that produce a quantifiable signal from biological interactions in proportion to the concentration of a target analyte. An aptasensor is a biosensor in which a DNA or RNA aptamer has been used as a biological recognition element and can identify target molecules with a high degree of sensitivity and affinity. Designed biosensors could provide effective methods for the highly selective and specific detection of thrombin. This review has attempted to provide an update of the various biosensors proposed in the literature, which have been designed for thrombin detection. According to their various transducers, the constructions and compositions, the performance, benefits, and restrictions of each are summarized and compared.

Sensitivity of photoelctrocehmical aptasensor using spiral nanorods for detecting antiobiotic levels in experimental and real samples

Given increasing concern regarding antibiotic environmental contamination, there is immediate need to monitor antibiotic levels to effectively control pollution. In this study, we used a photoelectrochemical aptasensor based on TiO₂@MoS₂ spiral nanoarrays to detect chloramphenicol (CAP) in antibiotics. Nanoarrays were directly grown on fluorine-doped tin oxide (FTO) conductive glass with excellent biochemical stability, while aptamer-SH were immobilized by chemical binding on a synthetic TiO₂@MoS₂ nanoarray. Results show that the photocurrents were reduced in the presence of photoelectrochemistry associated with specific selection of aptamer for CAP. When the measurement of the fabricated nanomaterial chip was carried out using a three-electrode system, we found a highly specific and stable detection of chloramphenicol that ranged between 0.1 pM and 1 μM, with the detection limit of 0.1 pM. In addition, we obtained satisfactory results when real sample were used to validate the potential of photoelectrochemical (PEC) aptasensor for detecting chloramphenicol content in milk. Our results demonstrate that photoelectrochemical aptasensor is conducive to the development of less toxic multifunctional nanomaterials, making the biosensor more robust and environmentally friendly. Therefore, photoelectrochemical aptasensor can be widely applied in the field of environmental monitoring.

Hollow performances quenching label of Au NPs@CoSnO3 nanoboxes-based sandwich photoelectrochemical immunosensor for sensitive CYFRA 21-1 detection

In this work, a fire-new "signal-off" type photoelectrochemical (PEC) immunosensor based on bismuth sulfide/iodine doped bismuth oxychloride (Bi₂S₃/I:BiOCl) heterostructure as a platform and Au nanoparticles loaded hollow CoSnO₃ nanoboxes (Au NPs@CoSnO₃) as quenching label was designed, for sensitive detection of CYFRA 21-1. The I:BiOCl with flower-like structure could supply high specific surface area for loading nanometer materials. Then, Bi₂S₃ was formed in-situ by S^2- adsorption on the surface of I:BiOCl by dangling bond of Bi³⁺, but did not change the flower-like structure of I:BiOCl. Then, n-type Bi₂S₃ and p-type I:BiOCl heterostructure showed good photoelectric behavior by providing an additional electric field to accelerate electron-hole separation. Furthermore, the production process of the heterostructure was simple, fast, low temperature, and without complex raw materials. The Au NPs@CoSnO₃ with good photocatalytic activity could strongly compete with Bi₂S₃/I:BiOCl for electron donor of ascorbic acid (AA). Meanwhile, the CoSnO₃ with hollow structure made the quenching effect more significant by the light-scattering effect that enhanced the light absorption capacity and shorten distance of carrier transport. Under optimal conditions, this proposed strategy displayed the low detection limit of 30 fg/mL, with a high linearity range from 100 fg/mL to 100 ng/mL for tumor markers CYFRA 21-1. Simultaneously, it also exhibited excellent specificity and acceptable stability, which might provide a new perspective for the fabrication of other PEC immunosensors with heterostructure simple synthesis and hollow materials.

Photoelectrochemical thrombin biosensor based on perylene-3,4,9,10-tetracarboxylic acid and Au co-functionalized ZnO nanorods with signal-off quenching effect of Ag@Ag2S

In this work, a thrombin photoelectrochemical aptasensor was reported based on a photoanode of perylene-3,4,9,10-tetracarboxylic acid (PTCA), Au nanoparticle co-functionalized ZnO nanorods (ZnO NRs) and the "signal-off" amplification effect of Ag@Ag2S. The photocurrent response of the ZnO NRs was improved greatly due to the excellent visible-light photoelectric performance of PTCA and the surface plasmon resonance (SPR) effect of Au nanoparticles. Due to the specific recognition between thrombin and aptamers, the non-conductive complex with a steric hindrance structure blocked the diffusion path of the electron donating ascorbic acid (AA) and then the "signal-off" Ag@Ag2S quencher was captured. The quencher blocked the irradiation light toward the ZnO NRs/PTCA/Au electrode and competitively consumed the electron donor AA that could have been involved in the oxidation reaction with photogenerated holes of PTCA, resulting in the further decrease of the photocurrent. Based on the evident photocurrent response of the photoanode and the superior quenching strategies, the detection limit of thrombin is as low as 33 fM with a wide linear detection range from 0.0001 nM to 50 nM. The prepared biosensor also exhibited good specificity, reproducibility and stability, suggesting potential application in thrombin specific detection.

Selective determination of non-organophosphorus insecticide using DNA aptamer-based single-use biosensors

In the present study, we developed a disposable aptamer-based biosensor for rapid, sensitive, and reliable detection of acetamiprid (ACE). To improve the sensitivity of the aptasensor, poly-5-amino-2-mercapto-1,3,4-thiadiazole [P(AMT)] and gold nanoparticles (AuNPs) were progressively electrodeposited on the screen-printed electrode (SPE) surface by using cyclic voltammetry (CV) technique. For the determination of ACE, thiol-modified primary aptamer (Apt1) was selected by using the SELEX method and immobilized on the surface of the P(AMT) and AuNPs-modified SPE (SPE/P(AMT)/AuNPs) via AuS bonding. Then, the surface-bound aptamer was incubated with ACE for 45 Min. After that, the biotin-labeled aptamer 2 (Apt2) was interacted with the ACE, then the enzyme-labeled step was performed. In this step, alkaline phosphatase (ALP) was bound to the surface through the interaction between Apt2 labeled with biotin and streptavidin (strep)-ALP conjugate. The determination of ACE was achieved by measuring the oxidation signal of α-naphthol, which is formed on the electrode surface through the interaction of ALP with α-naphthyl phosphate. The working range of the developed aptasensor was determined as 5 × 10^-12 -5 × 10^-10  mol L^-1 with a low limit of detection (1.5 pmol L^-1 ). It was also found that the proposed aptasensor possessed great advantages such as low cost, good selectivity, and good reproducibility.

Photoelectrochemical assay for DNA hydroxymethylation determination based on the inhibited photoactivity of black TiO2 nanosphere by ZnO

A photoelectrochemical method was proposed for DNA hydroxymethylation determination using black TiO₂ (B-TiO₂) nanosphere as photoactive material and ZnO as photoactivity inhibitor. After hydroxymethylated DNA (5hmC-DNA) was captured on the probe modified B-TiO₂/ITO electrode surface through hybridization, a glycosyl can be then transferred from uridine diphosphoglucose to 5hmC-DNA and formed a covalent structure with -CH₂OH in the presence of T4 β-glucosyltransferase (β-GT). Afterwards, based on a series of covalent reaction, amino functionalized ZnO nanoparticles are further immobilized to the surface of the electrode. Due to the capacity to expend the irradiation light and the photogenerated electron of electron donor, the modified ZnO nanoparticles can result in a decreased photocurrent. The developed method shows wide linear ranges from 0.05-200 nM for hydroxymethylated DNA and 1-220 unit·mL^-1 for T4-β-glucosyltransferase. The corresponding determination limits were 0.013 nM and 0.24 unit·mL^-1, respectively. The enzyme activity inhibited by 4-phenylimidazole was evaluated. This photoelectrochemical method shows high specificity for 5hmC-DNA (compared to 5fC, 5mC, m6A, control) and β-GT (compared to β-AGT, UGT2B7), and shows excellent stability for testing 5hmC (RSD = 2.75%). Graphical abstractSchematic representation of photoelectrochemical method for DNA hydroxymethylation and β-glucosyltransferase detection based on the glycosylation reaction of -CH₂OH in 5-hydroxymethylcytosine and the inhibition activity of ZnO to the photoactivity of black TiO₂ nanospheres.

A novel supramolecular polymer gel-based long-alkyl-chain-functionalized coumarin acylhydrazone for the sequential detection and separation of toxic ions

A novel approach for the detection and separation of toxic ions was successfully developed via the introduction of competitive reactions into a long-alkyl-chained acylhydrazone-based coumarin supramolecular polymer, chemosensor OGC (3%, n-BuOH/H₂O), which showed sequential detection and separation of CN^-, Fe³⁺ and S^2-, Ag⁺ in the gel state with high selectivity and sensitivity. Moreover, the ion-responsive films were prepared for the convenient and continuous detection of CN^-, Fe³⁺ and S^2-, Ag⁺ in water solution.

A "signal-on" electrochemical biosensor based on DNAzyme-driven bipedal DNA walkers and TdT-mediated cascade signal amplification strategy

In this work, a dual amplified signal enhancement approach based on coupling deoxyribozyme (DNAzyme)-driven bipedal DNA walkers (BDW) and terminal deoxynucleotidyl transferase (TdT)-mediated DNA elongation signal amplifications has been developed for highly sensitive and label-free electrochemical detection of thrombin in human serums. In presence of thrombin, the BDW complex, which is comprised from the target thrombin and two DNAzyme-containing probes, can exhibit autonomous cleavage behavior on the surface of the substrate DNA (SD) modified electrode, and remove the cleaved DNA fragment from the electrode surface. Subsequently, the TdT can catalyze the elongation of the SD with free 3'-OH termini and formation of many G-quadruplex sequence replicates with the presence of 2'-deoxyaguanosine-5'-triphosphate (dGTP) and adenosine 5'-triphosphate (dATP) at a molar ratio of 6:4. These G-quadruplex sequences bind hemin and generate drastically amplified current response for sensitive detection of thrombin in a "signal-on" and completely label-free fashion. Under optimized conditions, the response peak current was linear with the concentration of thrombin in the range from 0.5 pM to 100000 pM with detection limit of 0.31 pM. This research provides us a sustainable idea for the hyphenated multiple amplification strategies and a stable and effective method for the detection of protein biomarkers.