Tailoring the surface chemistry of SiO2-based monoliths to enhance the selectivity of SALDI-MS analysis of small molecules

Matrix- and surface-assisted laser desorption/ionization-mass spectrometry analysis of fingermark components for forensic studies: current trends and future prospects

The chemical analysis of fingermarks (FMs) has attracted considerable attention in the realm of forensic investigations. Techniques based on direct ionization of a sample by laser irradiation, specifically matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS), have provided excellent figures of merit for analyzing high molecular-weight compounds. However, it can be challenging to analyze low molecular-weight compounds using MALDI-MS owing to potential interference produced by the organic matrices in the low molecular-weight region, which can impede the detection of small molecules (m/z < 700 Da). Alternately, surface-assisted laser desorption/ionization-mass spectrometry (SALDI-MS) has shown great promise for small molecules analysis owing to the unique properties of the nanostructures used, particularly, minimal chemical background in low m/z region improved the production of ions involved in this method. The advancement of MALDI-MS and SALDI-MS has propelled their application in the analysis of FM components, focused on gaining deep insights into individual traits. This review aims to outline the current role of MALDI-MS and SALDI-MS in the chemical analysis of FMs. It also describes the latest achievements in forensic intelligence derived from fingermark analysis using these powerful methods. The accomplishments include the understanding of certain characteristics and lifestyles of donors. The review offers a comprehensive overview of the challenges and demands in this field. It suggests potential enhancements in this rapidly expanding domain to bridge the gap between research and practical police casework.

Continuous synthesis of BaFe2O4 and BaFe12O19 nanoparticles in a droplet microreactor for efficient detection of antihistamine drugs in oral fluid using surface-assisted laser desorption/ionization mass spectrometry

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) has received considerable attention as a complementary approach to matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), offering substantial potential for analyzing molecules in the low-mass region. Herein, we propose a facile method, a microreactor for the synthesis of two types of barium ferrite (BaFe2O4 and BaFe12O19) nanoparticles (NPs) within moving droplets for detecting antihistamine (AH) drugs in oral fluid (OF). The synthesized BaFe2O4 and BaFe12O19 NPs exhibited small particle size, good ultraviolet absorption, and excellent performance in SALDI-MS, as determined by survival yield measurements. The limits-of-detection for AH drugs were in the range of 1 pg mL-1 to 100 ng mL-1, and spot-spot reproducibility of the SALDI substrates was satisfactory. Moreover, when analyzing cetirizine in OF, the obtained recoveries of cetirizine were 101% and 99% using BaFe2O4 and BaFe12O19 NP, respectively. Furthermore, the proposed method was validated by analyzing OF samples from a healthy volunteer who consumed a 5 mg levocetirizine tablet for seven days. SALDI-MS analysis confirmed the successful detection of endogenous components, the parent ion of cetirizine, and other exogenous substances. This study reports an advanced application of droplet microreactor technology for designing and synthesizing a wide range of novel and efficient SALDI-MS substrates for various applications.

Development of efficient SALDI substrate based on Au-TiO2 nanohybrids for environmental and forensic detection of dyes and NSAIDs

Herein, a matrix-free approach is presented for comprehensive environmental and forensic analysis of dyes and nonsteroidal anti-inflammatory drugs (NSAIDs) using Au-TiO₂ nanohybrids coupled with surface-assisted pulsed laser desorption ionization-mass spectrometry (SALDI-MS). The Au-TiO₂ nanohybrids was prepared and characterized using inductively coupled plasma-optical emission spectrometry (ICP-OES), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), surface area measurements, ultraviolet-visible (UV-vis) spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy-energy dispersive spectrometry (SEM-EDS). Initially, the optimal Au content was assessed using the survival yield (SY) method, confirming that 7.5% Au content on the TiO₂ surface offered the highest ionization efficiency. Subsequently, environmental analyses of dyes and NSAIDs in water samples were performed, and sensitive detection of all analytes was achieved with limits of detection (LODs) ranging from 10.0 ng mL^-1 to 10.0 fg mL^-1 and good spot-to-spot reproducibility. Additionally, the effect of potential contaminants commonly found in environmental samples, such as salts, surfactants and pesticides was also considered. Despite signal intensity reduction at high concentrations of some salts, the target analytes were detected, while the presence of surfactants and pesticides did not cause significant signal intensity reduction. Additionally, dyed and undyed Tetoron fibers and the effect of adhesive tape were evaluated. Direct analysis of the dyed Tetoron fibers on the target plate, using the nanohybrids, enabled higher detection sensitivity of the dyes, in addition to adducts of polystyrene and cellulose, the main components of the fiber. Finally, NSAIDs in oral fluid were analyzed and sensitive detection of the analytes was observed using the nanohybrids with LODs and LOQs in the range of 0.1-10 ng mL^-1 and 1-20 ng mL^-1, respectively. The trueness of the exact mass was in the range of 0.64-6.2 ppm while the recovery of the spiked samples was in the range of 82.90-107.54%% indicating the efficiency of the Au-TiO₂ nanohybrids as SALDI substrate. Thus, the Au-TiO₂ nanohybrids hold considerable promise in terms of sensitivity, reproducibility, and LOD, and may significantly contribute to environmental and forensic identification.

Preparation of ionogel-bonded mesoporous silica and its application in liquid chromatography

A new preparation strategy for stable ionogels on silica obtained by a chemical bonding method and its application in LC.

Influence of core size and capping ligand of gold nanoparticles on the desorption/ionization efficiency of small biomolecules in AP-SALDI-MS

Gold nanoparticles (AuNP) are frequently used in surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) for analysis of biomolecules because they exhibit suitable thermal and chemical properties as well as strong surface plasmonic effects. Moreover, the structures of AuNP can be controlled by well-established synthesis protocols. This was important in the present work, which studied the influence of the nanoparticles' structures on atmospheric pressure (AP)-SALDI-MS performance. A series of AuNP with different core sizes and capping ligands were investigated, to examine the desorption/ionization efficiency (DIE) under AP-SALDI conditions. The results showed that both the AuNP core size as well as the nature of the surface ligand had a strong influence on DIE. DIE increased with the size of the AuNP and the hydrophobicity of the ligands. Chemical interactions between ligand and analytes also influenced DIE. Moreover, we discovered that removing the organic ligands from the deposited AuNP substrate layer by simple laser irradiation prior to LDI further amplified DIE values. The optimized AuNP were successfully used to analyze a wide arrange of different low molecular weight biomolecules as well as a crude pig brain extract, which readily demonstrated the ability of the technique to detect a wide range of lipid species within highly complex samples.

Porous TiO2 Film Immobilized with Gold Nanoparticles for Dual-Polarity SALDI MS Detection and Imaging

Surface-assisted laser desorption/ionization (SALDI) mass spectrometry (MS) has become an attractive complementary approach to matrix-assisted laser desorption/ionization (MALDI) MS. SALDI MS has great potential for the detection of small molecules because of the absence of applied matrix. In this work, a functionalized porous TiO₂ film immobilized with gold nanoparticles (AuNPs-FPTDF) was prepared to enhance SALDI MS performance. The porous TiO₂ films were prepared by the facile sol-gel method and chemically functionalized for dense loading of AuNPs. The prepared AuNPs-FPTDF showed superior performance in the detection and imaging of small molecules in dual-polarity modes, with high detection sensitivity in the low pmol range, good repeatability, and low background noise compared to common organic MALDI matrixes. Its usage efficiently enhanced SALDI MS detection of various small molecules, such as amino acids and neurotransmitters, fatty acids, saccharides, alkaloids, and flavonoids, as compared with α-cyano-4-hydroxycinnamic acid, 9-aminoacridine, and the three precursor substrates of AuNPs-FPTDF. In addition, the blood glucose level in rats was successfully determined from a linearity concentration range of 0.5-9 mM, as well as other biomarkers in rat serum with SALDI MS. More importantly, the spatial distribution of metabolites from the intact flowers of the medicinal plant Catharanthus roseus was explored by using the AuNPs-FPTDF as an imprint SALDI MS substrate in dual-polarity modes. These results demonstrate wide applications and superior performances of the AuNPs-FPTDF as a multifunctional SALDI surface with enhanced detection sensitivity and imaging capabilities.