The hydrophilic boronic acid-poly(ethylene glycol) methyl ether methacrylate copolymer brushes functionalized magnetic carbon nanotubes for the selective enrichment of glycoproteins

Facial on-line enrichment of glycoproteins by capillary electrophoresis with boronate-functionalized poly(glycidyl methacrylate) microparticles coated column

A facial and rapid method for glycoproteins enrichment by capillary electrophoresis was developed. The 3-aminophenylboronic acid-functionalized poly(glycidyl methacrylate) microparticles (PGMA@APBA) were attached to the capillary inlet (length of ∼1.5 cm) by electrostatic self-assemble action to prepare a partially coated capillary column. The process is simple and reversible, allowing for easy renewal of the PGMA@APBA coating when its enrichment efficiency decreases. By utilizing the coated column, glycoproteins can be enriched within 2 min. The column exhibits a specific enrichment for glycoproteins and can be consecutively used for approximately 60 runs. The relative standard deviations (RSDs) of peak area of run-to-run (n = 5) and batch-to-batch (n = 3) were 1.5 % and 1.0%, respectively. The method was successfully applied to enrich glycoproteins from 1 × 1012-fold diluted real egg white sample, indicating its practical applicability.

Construction of the molecularly imprinted adsorbent based on shaddock peel biochar sphere for highly sensitive detection of ribavirin in food and water resources

Ribavirin (RBV) that is not metabolically released into the environment can contaminate the environment and even make organisms resistant to it. Therefore, it is of great significance to establish a simple and effective method for adsorbing RBV in the environment. In this study, a novel biochar-based boronate affinity molecularly imprinted polymers (C@H@B-MIPs) were synthesized. This is the first time that shaddock peel biochar sphere was used as a carrier for specific recognition of RBV. The polymerization conditions were optimized and the binding properties of RBV were studied. Benefiting from the synergistic effect of boronate affinity and surface imprinting, the C@H@B-MIPs showed rapid equilibrium kinetics of 15 min, high adsorption capacity of 18.30 mg g-1, and excellent reusability for RBV. The linear range was 0.05-100 mg L-1, and the detection limit was 0.023 mg L-1. This method was triumphant applied to the selective adsorption of RBV in food and water resources with recovery rates of 81.4-97.7%. This study provides a practical platform for the manufacture of efficient biomass-based adsorbents.

Benzeneboronic-alginate/quaternized chitosan-catechol powder with rapid self-gelation, wet adhesion, biodegradation and antibacterial activity for non-compressible hemorrhage control

Although hemostatic powders have excellent adaptability for irregular and inaccessible wounds, their hemostasis for continuous bleeding or bleeding wounds of non-compressible organs remains a critical challenge. Herein, a series of benzeneboronic acid-modified sodium alginate/catechol-modified quaternized chitosan (SA-BA/QCS-C, SBQCC) powders is developed by borate ester crosslinking for non-compressible hemorrhage control. SBQCC powders possess remarkable tissue adhesion, rapid self-gelation, good cytocompatibility and antibacterial activity against S. aureus and E. coil. The blood coagulation assays show that SBQCC powders display excellent blood clotting ability due to the synergistic effect of SA-BA and QCS-C. The SBQCC2 powder with the SA-BA to QCS-C mass ratio of 5 to 3 has the greatest effect on the blood-clotting rate. Upon depositing SBQCC2 powder to bleeding wounds of rabbit liver, the powder can absorb a large amount of blood and form a stable hydrogel physical barrier at the bleeding wounds in situ to achieve non-pressing rapid hemostasis. The SBQCC2 powder also has good biocompatibility and can be degraded in vivo. Altogether, the SBQCC powders can be a promising candidate for rapid hemostasis, and these findings may provide a new perspective for improving the hemostatic efficiency of the hemostatic powder in biomedical fields.

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymer for specific separation and enrichment of glycoprotein from food samples: a co-modification of DMSA and boronate affinity

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymers (D-MIPs) were developed as solid phase extraction (SPE) adsorbents for the specific identification of ovalbumin (OVA) under physiological pH conditions prior to ultraviolet visible (UV-vis) spectrophotometric detection. Herein, macroporous alumina (MA) was used as a matrix; dimercaptosuccinic acid (DMSA) and 3-aminophenylboric acid (APBA) were employed as dual-functional monomers; APBA is a self-polymerizing monomer. The effects of synthesis conditions, SPE conditions as well as selectivity, reproducibility, and reusability were studied. The co-modification of DMSA and boronate affinity renders the adsorbent exhibiting a high adsorption capacity (114.4 mg g^-1) and short equilibrium time (30 min). The surface imprinting technology causes the adsorbent to have high selectivity towards OVA. The OVA recovery range is 91.1-99.6%. This study provides a promising method for the enrichment of OVA and other cis-diol-containing analytes in complex biological samples. A novel metal oxide-based macroporous ordered nanoparticle with a combination of DMSA and boronate affinity was successfully prepared for specific separation and enrichment of glycoprotein from complex biological samples.

Preparation of a boronate affinity-functionalized metal–organic framework material for selective recognition and separation of glycoproteins at physiological pH

A boronate affinity functionalized metal–organic framework material was successfully prepared for the efficient and selective extraction of OVA glycoprotein from egg white samples and protein powder.

Recent advances in magnetic carbon nanotubes: synthesis, challenges and highlighted applications

Magnetic carbon nanotubes (MCNTs), consisting of carbon nanotubes (CNTs) and magnetic nanoparticles (MNPs), have enormous exploration and application potentials due to their superior physical and chemical properties, such as unique magnetism and high enrichment performance. This review concentrates on the rapid advances in the synthesis and application of magnetic carbon nanotubes. Great progress has been made in the preparation of MCNTs by developing methods including chemical vapor deposition, pyrolysis procedure, sol-gel process, template-based synthesis, filling process and hydrothermal/solvothermal method. Various applications of MCNTs as a mediator of the adsorbent in magnetic solid-phase extraction, sensors, antibacterial agents, and imaging system contrast agents, and in drug delivery and catalysis are discussed. In order to overcome the drawbacks of MCNTs, such as sidewall damage, lack of convincing quantitative characterization methods, toxicity and environmental impact, and deficiency of extraction performance, researchers proposed some solutions in recent years. We systematically review the latest advances in MCNTs and discuss the direction of future development.

A review on recent advances in the enrichment of glycopeptides and glycoproteins by liquid chromatographic methods: 2016-Present

Among various protein post-translational modifications (PTMs), glycosylation has received special attention due to its immense role in molecular interactions, cellular signal transduction, immune response, etc. Aberration in glycan moieties of a glycoprotein is associated with cancer, diabetes, and bacterial and viral infections. In biofluids (plasma, saliva, urine, milk, etc.), glycoproteins are low in abundance and are masked by the presence of high abundant proteins. Hence, prior to their identification using mass spectrometry methods, liquid chromatography (LC)-based approaches were widely used. A general enrichment strategy involves a protein digestion step, followed by LC-based enrichment and desorption of glycopeptides, and enzymatic excision of the glycans. The focus of this review article is to highlight the articles published since 2016 that dealt with different LC-based approaches for glycopeptide and glycoprotein enrichment. The preparation of stationary phases, their surface activation, and ligand immobilization strategies have been discussed in detail. Finally, the major developments and future trends in the field have been summarized.

A strategy of utilizing Cu2+-mediating interaction to prepare magnetic imprinted polymers for the selective detection of celastrol in traditional Chinese medicines

In this work, a novel strategy to prepare molecularly imprinted polymers (MIPs) functionalized magnetic carbon nanotubes (MCNTs) via a facile sol-gel polymerization by adopting Cu²⁺-mediating interaction was presented for selective recognition of celastrol (Cel), in the traditional Chinese medicines (TCM). Firstly, template Cel, 3-aminopropyltriethoxysilane (APTES) as monomer and Cu²⁺ (co-monomer) were mixed to form a self-assembled pre-complex, in which Cu²⁺ could coordinate with Cel. Meanwhile, APTES plays a role of bridge between APTES and Cel. Secondly, carboxyl modified MCNTs as substrate was added into the pre-complex solution. After that, a multi-step sol-gel polymerization process was occurred in the presence of tetraethylorthosilicate as cross-linker and acetic acid as catalyst. Finally, MIPs layer was formed on the surface of the MCNTs (Cel-MIPs@MCNTs) after the removal of template with methanol/acetic. The morphology and structure of Cel-MIPs@MCNTs was investigated by various characterization techniques. The adsorption performance of Cel-MIPs@MCNTs to Cel was illustrated by kinetic, isothermal and selective binding experiments. The results displayed that the Cel-MIPs@MCNTs possessed fast kinetic equilibrium time (40 s), high adsorption capacity (13.35 μg mg^-1), good imprinting factor of 3.41, and high magnetic responsivity (44.38 emu·g^-1), which can be used as an ideal adsorbent for rapid isolation and enrichment of target analytes. A selective and sensitive method based on Cel-MIPs@MCNTs coupling with HPLC was developed for Cel determination including a wide linear range (0.15-200 μg mL^-1) with correlation coefficient of 0.9998, a low limit of detection (0.05 μg mL^-1). Furthermore, the applicability of Cel-MIPs@MCNTs was demonstrated to isolate and determine Cel in TCM samples with satisfactory recoveries ranged from 84.47% to 91.5% (RSD<5.35%). The results revealed that Cel-MIPs@MCNTs offer great potential as an adsorbent for selective and efficient isolation of Cel from complex TCM samples.

The molecular imprinting of magnetic nanoparticles with boric acid affinity for the selective recognition and isolation of glycoproteins

A strategy was designed for the molecular imprinting of magnetic nanoparticles with boric acid affinity (MNPs@MIP) which were then used for the selective recognition and isolation of glycoproteins. Fe₃O₄ nanoparticles were prepared by a solvothermal method and direct silanization by the condensation polymerization of aminopropyltriethoxysilane (APTES). Subsequently, phenylboric acid was functionalized by reductive amination between 2,3-difluoro-4-formyl phenylboric acid (DFFPBA) and the amido group. The resultant Fe₃O₄@SiO₂–DFFPBA was then used for the selective adsorption of a glycoprotein template. Finally, a molecularly imprinted layer was covered on the surface nanoparticles by the condensation polymerization of tetraethyl orthosilicate (TEOS). The adsorption capacities of the resultant MNPs@MIP–HRP and MNPs@MIP–OVA to horseradish peroxidase (HRP) or ovalbumin (OVA) were significantly higher than non-imprinted particles (MNPs@NIP). Moreover, the adsorption capacities of MNPs@MIP–HRP and MNPs@MIP–OVA on non-template protein and non-glycoprotein bovine serum albumin (BSA) were significantly lower than those of their respective template proteins, thus indicating that both of the prepared MNPs@MIP exhibited excellent selectivity.

A strategy was designed for the preparation of molecular imprinting of magnetic nanoparticles with boric acid affinity (MNPs@MIP), and the resultant MNPs@MIP exhibited excellent selectivity for template glycoproteins.

A novel porous polymeric microsphere for the selective adsorption and isolation of conalbumin

Porous polymeric microspheres, poly(styrene-divinyl benzene, PSDVB)-poly(ethylene glycol monoallyl ether, PEGMAE), termed as PSDVB-PEGMAE, are prepared via double emulsion interfacial polymerization strategy. PSDVB-PEGMAE microspheres exhibit a mean diameter of 2.98 μm, and possess heterogeneous porous structure with a pore volume of 0.354 cm³ g^-1 and a pore size of 34.3 nm. PEGMAE moiety is identified on the external surface of the microspheres, while both PSDVB and PEGMAE moieties are found in the interior pores. The PSDVB-PEGMAE microspheres possess favorable selectivity towards the adsorption of conalbumin (ConA) through hydrogen-bonding and hydrophobic interactions, via surface and inter-pore adsorption. At pH 6, an adsorption capacity of 171.9 mg g^-1 is achieved for ConA. The captured ConA may be readily recovered by stripping with a cetane trimethyl ammonium bromide (CTAB) solution (0.1%, m/v). The microspheres are further used for the isolation of ConA from egg white, deriving high purity ConA as demonstrated by SDS-PAGE assay.

Diethylenetriamine assisted functionalization of boronic acid on poly GMA-MAA-DVB for selective enrichment of glycoproteins and glycopeptides

Cis-diol compounds are class of biomolecules including nucleosides, glycoproteins, saccharides, and nucleotides, which play vital roles in various biological processes. Due to low abundances of these species in the complex biological samples, their identification and analysis is difficult. Boronate affinity materials are commonly used for the isolation and enrichment of cis-diol compounds, due to their unique, facile and selective enrichment mechanism. In this study we report a selective approach to extract nucleosides, glycopeptides and glycoproteins using boronic acid functionalized GMA-MAA-DVB polymer. This novel polymer, reported for the first time in proteomics, have high BET surface area (132.8447 m² g^-1) which contribute to efficient enrichment and average pore size (20.3449 nm) to facilitates the nano confinement effect for strong interactions. Hydrophilic character of methacrylic acid and diethylenetriamine, along with inherent affinity of boronic acid for glycosylated biomolecules result in selectivity up to 1:500 for peptides and 1:1000 for glycoprotein. Binding constant for cis-diol compounds are in the range of 10^-4 to 10^-6 M and theoretical binding capacity up to 85 mg g^-1 for HRP and 180 mg g^-1 for IgG, respectively. Furthermore, boronic acid functionalized polymer (BFP) enrich glycoproteins and glycopeptides in range of 1 pg mL^-1 and 0.04 ng mL^-1 with S/N ≥ 3. Finally, material is applied to enrich the glycoproteins from healthy human saliva sample and six glycoproteins are identified.