Alternative screening method for analyzing the water samples through an electrical microfluidics chip with classical microbiological assay comparison of P. aeruginosa

Design and optimization of microchannel for enhancement of the intensity of induced signal in particle/cell impedance measurement

The measured impedance signal of a single particle or cell in a microchannel is of the μA level, which is a challenge for measuring such weak signals. Therefore, it is necessary to improve the intensity for expanding the applications of impedance measurement. In this paper, we analyzed the impact of geometric parameters of microchannel on output signal intensity by using the three-dimensional finite element method. In comparison to conventional microchannels, which are distributed at a uniform height, the microchannels in this design use the height difference to enhance the signal intensity. By analyzing the effects of the geometric dimensions of the constriction channel, main channel height, radius of particles, types of cells, shapes of particles with different ellipticities, and particles spacing on the current signal, we concluded the optimal dimensions of these parameters to improve the intensity of the induced current signal. Through the fabrication of the optimized size of device and experimental demonstration, it is verified that the current signal intensity caused by the particle with a diameter of 10 µm is nearly twice that of the conventional structure with a height of 20 µm, which proves the correctness of the optimization results and the feasibility of this work. In addition, the performance of the device was verified by measuring the mixtures of different size particles as well as non-viable and viable yeast cells.

Recent developments of (bio)-sensors for detection of main microbiological and non-biological pollutants in plastic bottled water samples: A critical review

The importance of water in all biological processes is undeniable. Ensuring access to clean and safe drinking water is crucial for maintaining sustainable water resources. To elaborate, the consumption of water of inadequate quality can have a repercussion on human health. Furthermore, according to the instability of tap water quality, the consumption rate of bottled water is increasing every day at the global level. Although most people believe bottled water is safe, it can also be contaminated by microbiological or chemical pollution, which can increase the risk of disease. Over the last decades, several conventional analytical tools applied to analyze the contamination of bottled water. On the other hand, some limitations restrict their application in this field. Therefore, biosensors, as emerging analytical method, attract tremendous attention for detection both microbial and chemical contamination of bottled water. Biosensors enjoy several facilities including selectivity, affordability, and sensitivity. In this review, the developed biosensors for analyzing contamination of bottled water were highlighted, as along with working strategies, pros and cons of studies. Challenges and prospects were also examined.

An Evaluation of the Sensitivity and Applicability of a Droplet Digital Polymerase Chain Reaction Assay to Simultaneously Detect Pseudomonas aeruginosa and Pseudomonas fragi in Foods

Achieving effective control over microbial contamination necessitates the precise and concurrent identification of numerous pathogens. As a common bacterium in the environment, Pseudomonas is rich in variety. It not only has pathogenic strains, but also spoilage bacteria that cause food spoilage. In this research, we devised a remarkably sensitive duplex droplet digital PCR (dddPCR) reaction system to simultaneously detect pathogenic Pseudomonas aeruginosa (P. aeruginosa) and spoilage Pseudomonas fragi (P. fragi). By employing comparative genomics, we identified four genes of P. fragi. Through a specific analysis, the RS22680 gene was selected as the detection target for P. fragi, and the lasR gene was chosen for P. aeruginosa, which were applied to construct a dddPCR reaction. In terms of specificity, sensitivity and anti-interference ability, the constructed dddPCR detection system was verified and analyzed. The assay showed excellent sensitivity and applicability, as evidenced by a limit of detection of 100 cfu/mL. When the concentration of natural background bacteria in milk or fresh meat was 100 times that of the target detection bacteria, the method was still capable of completing the absolute quantification. In the simulation of actual sample contamination, P. aeruginosa could be detected after 3 h of enrichment culture, and P. fragi could be detected after 6 h. The established dddPCR detection system exhibits exceptional performance, serving as a foundation for the simultaneous detection of various pathogenic bacteria in food products.

Microfluidic colorimetric detection platform with sliding hybrid PMMA/paper microchip for human urine and blood sample analysis

A microfluidic colorimetric detection (MCD) platform consisting of a sliding hybrid PMMA/paper microchip and a smart analysis system is proposed for the convenient, low-cost and rapid analysis of human urine and whole blood samples. The sliding PMMA/paper microchip comprises a PMMA microfluidic chip for sample injection and transportation, a paper strip for sample filtration (urine) or separation (blood), and a sealed paper-chip detection zone for sample reaction and detection. In the proposed device, the paper-chip is coated with bicinchoninic acid (BCA) and biuret reagent and is then assembled into the PMMA microchip and packaged in aluminum housing. In the detection process, the PMMA/paper microchip is slid partially out of the housing, and 2 μL of sample (urine or whole blood) is dripped onto the sample injection zone. The chip is then slid back into the housing and the sample is filtered/separated by the paper strip and transferred under the effects of capillary action to the sealed paper-chip detection zone. The housing is inserted into the color analysis system and heated at 45 °C for 5 min to produce a purple-colored reaction complex. The complex is imaged using a CCD camera and the RGB color intensity of the image is then analyzed using a smartphone to determine the total protein (TP) concentration of the sample. The effectiveness of the proposed method is demonstrated using TP control samples with known concentrations in the range of 0.03-5.0 g/dL. The detection results obtained for 50 human urine samples obtained from random volunteers are shown to be consistent with those obtained from a conventional hospital analysis system (R² = 0.992). Moreover, the detection results obtained for the albumin (ALB) and creatine (CRE) concentrations of 50 whole blood samples are also shown to be in good agreement with the results obtained from the hospital analysis system (R² = 0.982 and 0.988, respectively).

A critical review on quantum dots: From synthesis toward applications in electrochemical biosensors for determination of disease-related biomolecules

Fluorescent quantum dots (QDs), defined by a diameter size of <10 nm, have been the core concept of nanoscience and nanotechnology since their inception. QDs possess many unique structural, electrochemical and photochemical properties that render them a promising platform for sensing applications. These nanomaterials can greatly enhance the analytical performances of biosensors, namely detection limit, sensitivity and selectivity. QDs are being developed not only because of their ability for signal enhancement but also because of their high capacity for fuctionalization with bioreceptors. In this review, we summarize a basic knowledge of QDs before focusing on their application to sensing thus far followed by a discussion of future directions for research into the sensing field. Due to the nature of QDs, especially their ability to combine nanotechnology and biotechnology, they possess the potential to open a novel paradigm on early diagnosis of diseases using the electrochemical biosensors. Therefore, we try to give a comprehensive view of the role of these zero-dimensional (0D) nanomaterials in the designing electrochemical sensors for determination of disease-related biomolecules, including tumor markers, inflammatory biomarkers, depression markers and archetypal biomarker in diabetes diagnosis. Considering the high potential of QDs for the electrochemistry-based biosensing strategies, the authors suggest that more research is needed on understanding their electronic properties and why synthesis and surface modification methods can affect these properties.