Detection of Ag+ ions via an anti-aggregation mechanism using unmodified gold nanoparticles in the presence of thiamazole

Recent Advancements in Sensing of Silver ions by Different Host Molecules: An Overview (2018-2023)

The chemosensors act as powerful tool in the detection of metal ions due to their simplicity, high sensitivity, low cost, low detection limit, rapid photophysical response, and application to the environmental and medical fields. This review article presents an overview for the chemosensing of Ag+ ions based on Calix, MOF, Nanoparticle, COF, Calix, Electrochemical chemosensor published from 2018 to 2023. Here, we have reviewed the sensing of Ag+ ions and summarised the binding response, mechanism, LOD, colorimetric response, adsorption capacity, technique used. The purpose of this review article to provide a detailed summary of the performance of different host chemosensors that are helpful for providing future direction to researchers on Ag+ ion detection and provides path to design effective chemsosensor (simple to synthesize, cost effective, high sensitivity, with more practical application). While studying the related article literature, we came across some challenges and that has been discussed lastly and provided solutions for them.

Tannic Acid-Functionalized Silver Nanoparticles as Colorimetric Probe for the Simultaneous and Sensitive Detection of Aluminum(III) and Fluoride Ions

In this study, we employed tannic acid (TA)-functionalized silver nanoparticles (TA@AgNPs) as colorimetric probe for the simultaneous and sensitive detection of Al(III) and F- ions. The proposed sensor was based on the aggregation and anti-aggregation effects of target Al(III) and F- ions on TA@AgNPs, respectively. Because of the strong coordination bond between Al(III) ions and TA, the addition of Al(III) ions to TA@AgNPs could cause aggregation and, hence, result in a significant change in the absorption and color of the test solution. Interestingly, in the presence of F- ions, the aggregation effect of Al(III) ions on TA@AgNPs can be effectively prevented. The extent of aggregation and anti-aggregation effects was concentration-dependent and can be used for the quantitative detection of Al(III) and F- ions. The as-proposed sensor presented the sensitive detection of Al(III) and F ions with limits of detection (LOD) of 0.2 and 0.19 μM, respectively. In addition, the proposed sensor showed excellent applicability for the detection of Al(III) and F- ions in real water samples. Moreover, the sensing strategy offered a simple, rapid, and sensitive detection procedure and could be used as a potential alternative to conventional methods, which usually involve sophisticated instruments, complicated processes, and a long detection time.

Poly(3-amino-carbazole) derivatives containing 1,10-phenanthroline and 8-hydroxyquinoline ligands: Synthesis, properties and application as ion sensors

As we know, excessive metal ions can even damage human health. Herein, two novel kinds of fluorescent sensing materials Poly(3-amino-carbazole) derivatives containing 1,10-phenanthroline and 8-hydroxyquinoline were synthesized and further applied to fluorescence detection for ions. The results show that Ni²⁺, Cu²⁺, and Pd²⁺ have excellent quenching effects on the fluorescence of Poly[9-(1,10-phenanthroline-2-yl)-9H-carbazol-3-amine] (PPNC), the LOD for these ions reaches 5.2 nM, 12.7 nM, 33.5 nM respectively. In the process of ion response, there is no shift of UV absorption peak, combined with IR spectra and theoretical calculation simulation, the quenching is considered to be caused by the coordination between metal ions and the second amine (-NH-) or 1,10-phenanthroline ligand of PPNC, which leads to the charge transfer from ligands to metal ions. In addition, an acid test was done for PPNC to verify and detect the presence of secondary amine (-NH-), and the results show that PPNC has good acid sensing ability which also supports the secondary amine (-NH-) structure. Finally, the paper test was performed on PPNC, indicating that PPNC has the potential for visual application.

Plasmonic nanoparticle's anti-aggregation application in sensor development for water and wastewater analysis

Colorimetric sensors have emerged as a powerful tool in the detection of water pollutants. Plasmonic nanoparticles use localized surface plasmon resonance (LSPR)-based colorimetric sensing. LSPR-based sensing can be accomplished through different strategies such as etching, growth, aggregation, and anti-aggregation. Based on these strategies, various sensors have been developed. This review focuses on the newly developed anti-aggregation-based strategy of plasmonic nanoparticles. Sensors based on this strategy have attracted increasing interest because of their exciting properties of high sensitivity, selectivity, and applicability. This review highlights LSPR-based anti-aggregation sensors, their classification, and role of plasmonic nanoparticles in these sensors for the detection of water pollutants. The anti-aggregation based sensing of major water pollutants such as heavy metal ions, anions, and small organic molecules has been summarized herein. This review also provides some personal insights into current challenges associated with anti-aggregation strategy of LSPR-based colorimetric sensors and proposes future research directions.

A Review of Analytical Techniques for the Determination and Separation of Silver Ions and Its Nanoparticles

Many articles have already been published dealing with silver ions and its nanoparticles, but mostly from the environmental and toxicological point of view. This article is a review focused on the various analytical techniques and detection platforms used in the separation and determination of mentioned above species, especially on the trace concentration level. Commonly used are optical methods because of their high sensitivity and easy automation. The separation methods are mainly used for the separation and preconcentration of silver particles. Their combination with other analytical techniques, mainly inductively coupled plasma mass spectrometry (ICP-MS) leads to very low detection limits of analysis. The electrochemical methods are also powerful and perspective mainly because of the fabrication of new sensors designed for silver determination. All methods may be combined with each other to achieve a synergistic improvement of analytical parameters with an impact on sensitivity, selectivity and reliability. The paper comprises a review of all three types of analytical methods on the determination of trace quantities of silver ions and its nanoparticles.

Toxic Ag+ detection based on Au@Ag core shell nanostructure formation using Tannic acid assisted synthesis of Pullulan stabilized gold nanoparticles

Herein, a sensitive colorimetric detection strategy is proposed for Ag⁺ detection based on the use of environmentally friendly synthesis of gold nanoparticles (AuNPs), at room temperature, using (tannic acid, TA), as the reductant and pullulan (PUL) as stabilizing agent. The colloidal solution (TA/PUL-AuNPs), at the optimal synthesis conditions, showed maximum absorbance at 529 nm with a berry red color. TEM and FESEM validated that the particles are spherical and monodispersed, while other characterization results elucidated the role of pullulan in the nano-synthesis. Ag⁺ addition to the probe (TA/PUL-AuNPs), pH 11, resulted in naked-eye color changes, owing to Au@Ag core shell nanostructure formation. Further, the added Ag⁺ is reduced to AgNPs, on the surface of the TA/PUL-AuNPs probe. A hypsochromic shift in the absorption maximum, from 529 to 409 nm was observed, while (A_Ag+-A_bl)@409 nm exhibited linearity with Ag⁺ concentrations, from 0.100 to 150 µM. The estimated limit of detection was 30.8 nM, which is far lower than the acceptable limit of 0.930 µM from the regulatory agency. The TA/PUL-AuNPs probe was further tested for Ag⁺ detection in lake water samples, and it displayed satisfactory detection performances for real sample applications.

Gold Nanoparticles-Based Colorimetric Assays for Environmental Monitoring and Food Safety Evaluation

Recent years have witnessed an exponential increase in the research on gold nanoparticles (AuNPs)-based colorimetric sensors to revolutionize point-of-use sensing devices. Hence, this review is compiled focused on current progress in the design and performance parameters of AuNPs-based sensors. The review begins with the characteristics of AuNPs, followed by a brief explanation of synthesis and functionalization methods. Then, the mechanisms of AuNPs-based sensors are comprehensively explained in two broad categories based on the surface plasmon resonance (SPR) characteristics of AuNPs and their peroxidase-like catalytic properties (nanozyme). SPR-based colorimetric sensors further categorize into aggregation, anti-aggregation, etching, growth-mediated, and accumulation-based methods depending on their sensing mechanisms. On the other hand, peroxidase activity-based colorimetric sensors are divided into two methods based on the expression or inhibition of peroxidase-like activity. Next, the analytes in environmental and food samples are classified as inorganic, organic, and biological pollutants, and recent progress in detection of these analytes are reviewed in detail. Finally, conclusions are provided, and future directions are highlighted. Improving the sensitivity, reproducibility, multiplexing capabilities, and cost-effectiveness for colorimetric detection of various analytes in environment and food matrices will have significant impact on fast testing of hazardous substances, hence reducing the pollution load in environment as well as rendering food contamination to ensure food safety.

A Colorimetric Detection of Noradrenaline in Wastewater Using Citrate-Capped Colloidal Gold Nanoparticles Probe

This study reports a simple, fast, and low-cost detection of noradrenaline (NA) in wastewater using citrate-capped colloidal gold nanoparticles (AuNPs). The addition of NA to citrate-capped colloidal AuNPs generates a colour modulation that the bare eye can detect due to the aggregation of the colloidal AuNPs. The relationship between the NA concentration and colloidal AuNPs aggregation was further monitored by ultraviolet–visible light (UV–vis) spectroscopy in an aqueous solution. The method displayed a linear range of 0–500 μM with R2 = 0.99 and an LOD and LOQ of 42.2 and 140.5 μM. Application in an environmental sample collected from the Darville Wastewater Treatment Plant shows that this work provided a cost-effective and spectrophotometric method that could be used for monitoring contamination in wastewater.

Sulfur-doped graphitic carbon nitride nanosheets as a sensitive fluorescent probe for detecting environmental and intracellular Ag

Silver is widely used in medical materials, photography, electronics and other industries as a precious metal. The large-scale industrial production of silver-containing products and liquid waste emissions aggravate the environmental pollution. Silver ion is one of the most toxic metal ions, causing pollution to the environment and damage to public health. Therefore, the efficient and sensitive detection of Ag+ in the water environment is extremely important. Sulfur-doped carbon nitride nanosheets (SCN Ns) were prepared by melamine and thiourea via high-temperature calcination. The morphology, chemical composition and surface functional groups of the SCN Ns were characterized by SEM, TEM, XRD, XPS, and FT-IR. The fluorescence of SCN Ns was gradually quenched as the Ag+ concentration increased. The detection limit for Ag+ was as low as 0.28 nM. The quenching mechanism mainly is attributed to static quenching. In this paper, SCN Ns were used as the fluorescent probe for detecting Ag+. SCN Ns have successfully detected Ag+ in different environmental aqueous samples and cells. Finally, SCN Ns were further applied to the visual quantitative detection of intracellular Ag+.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

The selective detection of Fe3+ ions using citrate-capped gold nanoparticles

Citrate is a ubiquitous biological molecule that functions as Fe³⁺ chelators in some bacteria and the blood plasma of humans. Inspired by the strong affinity between citrate and Fe³⁺, a colorimetric Fe³⁺ probe based on citrate-capped AuNPs without any additional modification was designed. Citrate-capped AuNPs with a diameter of 22 nm were applied to detect Fe³⁺ without other reagents' assistance. This easily-prepared and low-cost colorimetric sensor exhibited good selectivity towards Fe³⁺ among common metal ions, a good linear relationship in the range of 0.1-0.8 μM of Fe³⁺ and quick response time of 10 min.

Advances in Colorimetric Assay Based on AuNPs Modified by Proteins and Nucleic Acid Aptamers

This review is focused on the biosensing assay based on AuNPs (AuNPs) modified by proteins, peptides and nucleic acid aptamers. The unique physical properties of AuNPs allow their modification by proteins, peptides or nucleic acid aptamers by chemisorption as well as other methods including physical adsorption and covalent immobilization using carbodiimide chemistry or based on strong binding of biotinylated receptors on neutravidin, streptavidin or avidin. The methods of AuNPs preparation, their chemical modification and application in several biosensing assays are presented with focus on application of nucleic acid aptamers for colorimetry assay for determination of antibiotics and bacteria in food samples.

Surface engineering strategies of gold nanomaterials and their applications in biomedicine and detection

Gold nanomaterials have potential applications in biosensors and biomedicine due to their controllable synthesis steps, high biocompatibility, low toxicity and easy surface modification. However, there are still various limitations including low water solubility and stability, which greatly affect their applications. In addition, some synthetic methods are very complicated and costly. Therefore, huge efforts have been made to improve their properties. This review mainly introduces the strategies for surface modification of gold nanomaterials, such as amines, biological small molecules and organic small molecules as well as the biological applications of these functionalized AuNPs. We aim to provide effective ideas for better functionalization of gold nanomaterials in the future.