Photonic crystal based biosensors: Emerging inverse opals for biomarker detection

Cytosine-rich mismatched DNA aptamer combined with superparamagnetic photonic crystal sensing material for the specific visual detection of silver ions

DNA aptamer superparamagnetic photonic crystals (DSPCs), enriched with a highly selective cytosine-rich mismatched single-stranded DNA aptamer (CRDA), were successfully employed in a novel visual detection strategy for the detection of silver ions (Ag+). The technologies of superparamagnetic colloidal nanospheres (SCNs), DNA aptamer, and photonic crystals were combined to fabricate DPSCs. The aptamer was immobilized via electrostatic adsorption with amino groups that were chemically introduced on the surface of the SCNs, forming D-NH-SCNs. The detection is achieved by forming an Ag+ complex (C-Ag+-C) between Ag+ and D-NH-SCN. The DSPCs assembled under a magnetic field by D-NH-SCNs effectively detected Ag+ in the range of 1 μg/L to 5 mg/L, corresponding to the critical concentration range for heavy metals in drinking water. During the detection, the DSPC exhibited a wavelength blueshift from 652.8 nm to 626.4 nm (26.4 nm), as well as changes in reflection intensity. Notably, when detecting Ag+, a change in DSPC color from orange to yellow was observed. In summary, the developed visual detection material facilitates direct Ag + sensing. In the future, different DNA aptamers will be modified further to detect various targets in the fields of medicine, environmental monitoring, and food safety.

Photon Management Enabled by Opal and Inverse Opal Photonic Crystals: from Photocatalysis to Photoluminescence Regulation

Light is a promising renewable energy source and can be converted into heat, electricity, and chemical energy. However, the efficiency of light-energy conversion is largely hindered by limited light-absorption coefficients and the low quantum yield of current-generation materials. Photonic crystals (PCs) can adjust the propagation and distribution of photons because of their unique periodic structures, which offers a compelling platform for photon management. The periodicity of materials with an alternating refractive index can be used to manipulate the dispersion of photons to generate the photonic bandgap (PBG), in which light is reflected. The slow photon effect, i. e., photon propagation at a reduced group velocity near the edges of the PBG, is widely regarded as another valuable optical property for manipulating light. Furthermore, multiple light scattering can increase the optical path, which is a vital optical property for PCs. Recently, the light reflected by PBG, the slow photon effect, and multiple light scattering have been exploited to improve light utilization efficiency in photoelectrochemistry, materials chemistry, and biomedicine to enhance light-energy conversion efficiency. In this review, the fabrication of opal or inverse opal PCs and the theory for improving the light utilization efficiency of photocatalysis, solar cells, and photoluminescence regulation are discussed. We envision photon management of opal or inverse opal PCs may provide a promising avenue for light-assisted applications to improve light-energy-conversion efficiency.

Carbon dots-based fluorescent molecularly imprinted photonic crystal hydrogel strip: Portable and efficient strategy for selective detection of tetracycline in foods of animal origin

Rapid, portable, and sensitive detection of tetracycline (TC) is crucial for the environment and human health. In this study, we developed carbon dots (CDs)-based fluorescent molecularly imprinted photonic crystal hydrogel (FMIPH) strips for TC detection in animal-derived foods. CDs emit fluorescent signals, and molecularly imprinted polymers provide specific recognition sites for TC. Inverse opal photonic crystals afford stable 3D macroporous mass transfer channels that considerably reduce binding time between TC and the strips. The portable FMIPH strip exhibited a linear fluorescence response to TC in the concentration range of 0.1-50 μg mL-1, with a detection limit of 0.067 μg mL-1. Good recoveries of TC (93.86-112.59%) were observed in TC-spiked commercially available pork, eggs, and milk. A combination of FMIPH strips with a portable fluorescent reading device could achieve sensitive, on-site, and real-time detection of TC in animal-derived foods.

Sensitivity and quality factor improvement of photonic crystal sensors by geometrical optimization of waveguides and micro-ring resonators combination

In this work, the process of designing and simulating optical sensors based on photonic crystal (PC) micro-ring resonators (MRRs) has been investigated. According to the PC type, different waveguides and resonators can be designed, and various topologies can be proposed from their combination, for optical sensor applications. Here, the investigated MRR is of the symmetrical micro-hexagonal ring resonator (MHRR) type. Different arrays of MHRR arrangement have been designed to investigate their effects on the output spectrum. The results of the design and simulation of different topologies have been analyzed and compared with other numerical researches. Considering all the necessary aspects of PC optical sensors, a detailed and comprehensive algorithm has been presented for designing these devices and choosing the optimal structure. In a more complementary process, the effects of reflector rods have been investigated, which indicates the existence of similarity and compatibility in the design between the distance of reflector rods and the length of MHRRs to obtain the optimal structure. Finally, the effect of different values of lattice constant and radius of dielectric rods on FWHM, transmission (TR) and resonant wavelength is studied, and the most optimal mode is presented. In order to measure the performance of the proposed optimal sensor, its application for gas detection has been analyzed. TR, FWHM, quality factor (QF), sensitivity (S) and figure of merit (FOM) of the proposed sensor were equal to 96%, 0.31 nm, 2636, 6451 nm/RIU and 2960 RIU-1 respectively. An examination of results from similar research indicates a rational and effective approach for generating diverse topologies, aiming to attain the most optimal configuration for optical sensors employing MRRs. Furthermore, employing a systematic design process based on established principles and the proposed algorithm helps prevent arbitrary parameter variations, facilitating the attainment of desired outcomes in a more streamlined and efficient manner. Given the comprehensive nature of this research, it presents a viable solution for designing optical devices based on MRRs for use in optical integrated circuits (OICs) applications.

Biomarkers and optical based biosensors in cardiac disease detection: early and accurate diagnosis

Rapid and precise detection methods for the early-stage detection of cardiovascular irregularities are crucial to stopping and reducing their development. Cardiovascular diseases (CVDs) are the leading cause of death in the world. Hence, cardiac-related biomarkers are essential for monitoring and managing of process. The necessity for biomarker detection has significantly widened the field of biosensor development. Bio-sensing methods offer rapid detection, low cost, sensitivity, portability, and selectivity in the development of devices for biomarker detection. For the prediction of cardiovascular diseases, some biomarkers can be used, like C-reactive protein (CRP), troponin I or T, creatine kinase (CK-MB), B-type natriuretic peptide (BNP), myoglobin (Mb), suppression of tumorigenicity 2 protein (ST2) and galectin-3 (Gal3). In this review, recent research studies were covered for gaining insight into utilizing optical-based biosensors, including surface plasmon resonance (SPR), photonic crystals (PCs), fluorescence-based techniques, fiber optics, and also Raman spectroscopy biosensors for the ultrasensitive detection of cardiac biomarkers. The main goal of this review is to focus on the improvement of optical biosensors in the future for the diagnosis of heart diseases and to discuss how to enhance their properties for use in medicine. Some main data from each study reviewed are emphasized, including the CVD biomarkers and the response range of the optical-based devices and biosensors.

Self-Assembly of Shark Scale-Patterned Tunable Superhydrophobic/Antifouling Structures with Visual Color Response

The stacked riblet-like shark scales, also known as dermal denticles, allow them to control the boundary layer flow over the skin and to reduce interactions with any biomaterial attached, which guide the design of antifouling coatings. Interestingly, shark scales are with a wide variation in geometry both across species and body locations, thereby displaying diversified antifouling capabilities. Inspired by the multifarious denticles, a stretchable shark scale-patterned silica hollow sphere colloidal crystal/polyperfluoroether acrylate-polyurethane acrylate composite film is engineered through a scalable self-assembly approach. Upon stretching, the patterned photonic crystals feature different short-term antibacterial and long-term anti-biofilm performances with a distinguished color response under varied elongation ratios. To gain a better understanding, the dependence of elongation ratio on antiwetting behaviors, antifouling performances, and structural color changes has also been investigated in this research.

Engineering Porous Silicon-Based Microcavity for Chemical Sensing

In this article, the authors theoretically and experimentally investigated ways to improve the efficiency of porous silicon (PS)-based optical microcavity sensors as a 1D/2D host matrix for electronic tongue/nose systems. The transfer matrix method was used to compute reflectance spectra of structures with different [n_Ln_H] sets of low n_L and high n_H bilayer refractive indexes, the cavity position λ_c, and the number of bilayers N_bi. Sensor structures were prepared by electrochemically etching a silicon wafer. The kinetics of adsorption/desorption processes of ethanol-water-based solution was monitored in real time with a reflectivity probe-based setup. It was theoretically and experimentally demonstrated that the sensitivity of the microcavity sensor is higher for structures with refractive indexes in the lower range (and the corresponding porosity values in the upper range). The sensitivity is also improved for structures with the optical cavity mode (λ_c) adjusted toward longer wavelengths. The sensitivity of a distributed Bragg reflector (DBR) with cavity increases for a structure with cavity position λ_c in the long wavelength region. The full width at half maximum (fwhm_c) of the microcavity is smaller and the quality factor of microcavity (Q_c) is higher for the DBR with a larger number of structure layers N_bi. The experimental results are in good agreement with the simulated data. We believe that our results can help in developing rapid, sensitive, and reversible electronic tongue/nose sensing devices based on a PS host matrix.

Microfluidic Biosensor Integrated with Signal Transduction and Enhancement Mechanism for Ultrasensitive Noncompetitive Assay of Multiple Mycotoxins

To achieve high-throughput ultrasensitive detection of mycotoxins in food, a functional DNA-guided transition-state CRISPR/Cas12a microfluidic biosensor (named FTMB) was successfully constructed. The signal transduction CRISPR/Cas12a strategy in FTMB has utilized DNA sequences with a specific recognition function and activators to form trigger switches. Meanwhile, the transition-state CRISPR/Cas12a system was constructed by adjusting the composition ratio of crRNA and activator to achieve a high response for low concentrations of target mycotoxins. On the other hand, the signal enhancement of FTMB has efficiently integrated the signal output of quantum dots (QDs) with the fluorescence enhancement effect of photonic crystals (PCs). The construction of universal QDs for the CRISPR/Cas12a system and PC films matching the photonic bandgap produced a significant signal enhancement by a factor of 45.6. Overall, FTMB exhibited a wide analytic range (10^-5-10¹ ng·mL^-1), low detection of limit (fg·mL^-1), short detection period (∼40 min), high specificity, good precision (coefficients of variation <5%), and satisfactory practical sample analysis capacity (the consistency with HPLC at 88.76%-109.99%). It would provide a new and reliable solution for the rapid detection of multiple small molecules in the fields of clinical diagnosis and food safety.

An aptamer-functionalized photonic crystal sensor for ultrasensitive and label-free detection of aflatoxin B1

As a novel optical responsive material, photonic crystal is a promising sensing material in the recognition and detection of small molecules. Herein, a label-free composite sensor for aflatoxin B1 (AFB1) based on aptamer-functionalized photonic crystal arrays was successfully developed. Three-dimensional photonic crystals (3D PhCs) with a controllable number of layers were produced by a layer-by-layer (LBL) approach, and the introduction of gold nanoparticles (AuNPs) facilitated the immobilization procedure of recognition element aptamers, thus creating the AFB1 sensing detection system (AFB1-Apt 3D PhCs). The sensing system AFB1-Apt 3D PhCs exhibited a good linearity in the wide range of 1 pg mL^-1-100 ng mL^-1 AFB1 with a limit of detection (LOD) of 0.28 pg mL^-1. Furthermore AFB1-Apt 3D PhC was successfully applied in the determination of AFB1 in the millet and beer samples with good recovery. The sensing system performed ultrasensitive and label-free detection to the target, which could be further applied in the fields of food safety, clinical diagnosis or environmental monitoring, establishing an efficient and rapid universal detection platform.

Achieving Functionality and Multifunctionality through Bulk and Interfacial Structuring of Colloidal-Crystal-Templated Materials

Over the past 25 years, the field of colloidal crystal templating of inverse opal or three-dimensionally ordered macroporous (3DOM) structures has made tremendous progress. The degree of structural control over multiple length scales, understanding of mechanical properties, and complexity of systems in which 3DOM materials are a component have increased substantially. In addition, we are now seeing applications of 3DOM materials that make use of multiple features of their architecture at the same time. This Feature Article focuses on the different properties of 3DOM materials that provide functionality, including a relatively large surface area, the interconnectedness of the pores and the resulting good accessibility of the internal surface, the nanostructured features of the walls, the structural hierarchy and periodicity, well-defined surface roughness, and relative mechanical robustness at low density. It provides representative examples that illustrate the properties of interest related to applications including energy storage and conversion systems, sensors, catalysts, sorbents, photonics, actuators, and biomedical materials or devices.

A Robust Method for the Elaboration of SiO2-Based Colloidal Crystals as a Template for Inverse Opal Structures

Photonic crystals (PCs) are nanomaterials with photonic properties made up of periodically modulated dielectric materials that reflect light between a wavelength range located in the photonic band gap. Colloidal PCs (C-PC) have been proposed for several applications such as optical platforms for the formation of physical, chemical, and biological sensors based on a chromatic response to an external stimulus. In this work, a robust protocol for the elaboration of photonic crystals based on SiO₂ particle (SP) deposition using the vertical lifting method was studied. A wide range of lifting speeds and particle suspension concentrations were investigated by evaluating the C-PC reflectance spectrum. Thinner and higher reflectance peaks were obtained with a decrease in the lifting speed and an increase in the SP concentrations up to certain values. Seven batches of twelve C-PCs employing a SP 3% suspension and a lifting speed of 0.28 µm/s were prepared to test the reproducibility of this method. Every C-PC fabricated in this assay has a wavelength peak in a range of 10 nm and a peak width lower than 90 nm. Inverse-opal polymeric films with a highly porous and interconnected morphology were obtained using the developed C-PC as a template. Overall, these results showed that reproducible colloidal crystals could be elaborated on a large scale with a simple apparatus in a short period, providing a step forward in the scale-up of the fabrication of photonic colloidal crystal and IO structures as those employed for the elaboration of photonic polymeric sensors.

Emerging 0D, 1D, 2D, and 3D nanostructures for efficient point-of-care biosensing

The recent COVID-19 infection outbreak has raised the demand for rapid, highly sensitive POC biosensing technology for intelligent health and wellness. In this direction, efforts are being made to explore high-performance nano-systems for developing novel sensing technologies capable of functioning at point-of-care (POC) applications for quick diagnosis, data acquisition, and disease management. A combination of nanostructures [i.e., 0D (nanoparticles & quantum dots), 1D (nanorods, nanofibers, nanopillars, & nanowires), 2D (nanosheets, nanoplates, nanopores) & 3D nanomaterials (nanocomposites and complex hierarchical structures)], biosensing prototype, and micro-electronics makes biosensing suitable for early diagnosis, detection & prevention of life-threatening diseases. However, a knowledge gap associated with the potential of 0D, 1D, 2D, and 3D nanostructures for the design and development of efficient POC sensing is yet to be explored carefully and critically. With this focus, this review highlights the latest engineered 0D, 1D, 2D, and 3D nanomaterials for developing next-generation miniaturized, portable POC biosensors development to achieve high sensitivity with potential integration with the internet of medical things (IoMT, for miniaturization and data collection, security, and sharing), artificial intelligence (AI, for desired analytics), etc. for better diagnosis and disease management at the personalized level.

Silica Inverse Opal Nanostructured Sensors for Enhanced Immunodetection of Extracellular Vesicles by Quartz Crystal Microbalance with Dissipation Monitoring

Extracellular vesicles (EVs) are nanosized circulating assemblies that contain biomarkers considered promising for early diagnosis within neurology, cardiology, and oncology. Recently, acoustic wave biosensors, in particular based on quartz crystal microbalance with dissipation monitoring (QCM-D), have emerged as a sensitive, label-free, and selective EV characterization platform. A rational approach to further improving sensing detection limits relies on the nanostructuration of the sensor surfaces. To this end, inorganic inverse opals (IOs) derived from colloidal self-assembly present a highly tunable and scalable nanoarchitecture of suitable feature sizes and surface chemistry. This work systematically investigates their use in two-dimensional (2D) and three-dimensional (3D) for enhanced QCM-D EV detection. Precise tuning of the architecture parameters delivered improvements in detection performance to sensitivities as low as 6.24 × 10⁷ particles/mL. Our findings emphasize that attempts to enhance acoustic immunosensing via increasing the surface area by 3D nanostructuration need to be carefully analyzed in order to exclude solvent and artifact entrapment effects. Moreover, the use of 2D nanostructured electrodes to compartmentalize analyte anchoring presents a particularly promising design principle.

Electrochemiluminescence Systems for the Detection of Biomarkers: Strategical and Technological Advances

Electrochemiluminescence (ECL)-based sensing systems rely on light emissions from luminophores, which are generated by high-energy electron transfer reactions between electrogenerated species on an electrode. ECL systems have been widely used in the detection and monitoring of diverse, disease-related biomarkers due to their high selectivity and fast response times, as well as their spatial and temporal control of luminance, high controllability, and a wide detection range. This review focuses on the recent strategic and technological advances in ECL-based biomarker detection systems. We introduce several sensing systems for medical applications that are classified according to the reactions that drive ECL signal emissions. We also provide recent examples of sensing strategies and technologies based on factors that enhance sensitivity and multiplexing abilities as well as simplify sensing procedures. This review also discusses the potential strategies and technologies for the development of ECL systems with an enhanced detection ability.

Factors Influencing Recognition Capability of Inverse Opal Structured Photonic Crystal Sensors

Nowadays, many kinds of colloidal photonic crystal (PC) sensors with inverse opal (IO) structures have been developed. However, there are few systematic studies on the factors influencing their recognition capability and responsiveness capability. In this paper, the relationships between recognition capability of IO structured PC sensors and all the parameters in Bragg–Snell’s law have been explored. In addition, research on the recognition ability of PC sensors typically focuses only on the refractive index difference between the identified substances. Herein, we define two concepts, namely the absolute refractive index difference and the relative refractive index difference, and prove that the recognition ability not only relies on the absolute refractive index between the identified substances, but also on the relative refractive index. Bragg–Snell’s law analysis confirms that the responsiveness capability is directly proportional to the void size of the IO structure, which is also confirmed by the finite difference time domain (FDTD) method. It is believed that these systematic studies have important guiding significance for creating advanced IO structured PC sensors.

Dual-Responsive Photonic Crystal Sensors Based on Physical Crossing-Linking SF-PNIPAM Dual-Crosslinked Hydrogel

Flexible wearable materials have frequently been used in drug delivery, healthcare monitoring, and wearable sensors for decades. As a novel type of artificially designed functional material, photonic crystals (PCs) are sensitive to the changes in the external environment and stimuli signals. However, the rigidity of the PCs limits their application in the field of biometric and optical sensors. This study selects silk fibroin (SF) and poly-N-isopropylacrylamide (PNIPAM) as principal components to prepare the hydrogel with the physical crosslinking agent lithium silicate (LMSH) and is then integrated with PCs to obtain the SF-PNIPAM dual-crosslinked nanocomposite for temperature and strain sensing. The structural colors of the PCs change from blue to orange-red by the variation in temperature or strain. The visual temperature-sensing and adhesion properties enable the SF-PNIPAM dual-crosslinked nanocomposite to be directly attached to the skin in order to monitor the real-time dynamic of human temperature. Based on its excellent optical properties and biocompatibility, the SF-PNIPAM dual-crosslinked nanocomposite can be applied to the field of visual biosensing, wearable display devices, and wound dressing materials.

Structure and Optical Properties of Opal Films Made by an Out-of-Plane Electric Field-Assisted Capillary Deposition Method

Self-assembled opals that are considered as a promising candidate for three-dimensional photonic crystals often suffer from the existence of internal defects. Defects influence optical properties and limit the applicability of opal films. Directed assembly using external fields may offer a certain degree of tunability in the opal formation process. We investigate the effect of an out-of-plane electric field on the formation and optical properties of opal films deposited using the capillary deposition method. The application of an electric field of intermediate strength (20-30 V/cm) can improve opal quality. The quality of opal films was found to depend on the polarity of the bottom substrate resulting from the beneficial influence of an asymmetry between the growths and the interplay with gravity. The negatively charged bottom substrate results in slightly better opal quality. This finding shows the potential of electric fields to tune opal formation in order to reduce the defect content.

Flory-Huggins VOC Photonics Sensor Made of Cellulose Derivatives

As a widespread air pollutant, volatile organic compounds (VOCs) are harmful to the human body's skin, nervous system, and respiratory system. Low-cost, extensive, and continuous detection of VOCs is of great significance to human health. We infiltrated and coated cellulose acetate on the inverse opal photonic crystal skeleton of methylcellulose-polyvinyl alcohol-graphene oxide to construct a degradable, high-toughness cellulose VOC sensor. Cellulose acetate enhances the response to VOCs and achieves a highly selective response to acetone vapor due to the smaller Flory-Huggins parameter with acetone. This work proposes a general, simple, easy-to-use, and highly selective photonic crystal VOC sensor development strategy. Calculated from the Flory-Huggins solution theory, a suitable polymer was selected to modify the inverse opal photonic crystal framework and achieve high selectivity detection.

Label-Free Physical Techniques and Methodologies for Proteins Detection in Microfluidic Biosensor Structures

Proteins in biological fluids (blood, urine, cerebrospinal fluid) are important biomarkers of various pathological conditions. Protein biomarkers detection and quantification have been proven to be an indispensable diagnostic tool in clinical practice. There is a growing tendency towards using portable diagnostic biosensor devices for point-of-care (POC) analysis based on microfluidic technology as an alternative to conventional laboratory protein assays. In contrast to universally accepted analytical methods involving protein labeling, label-free approaches often allow the development of biosensors with minimal requirements for sample preparation by omitting expensive labelling reagents. The aim of the present work is to review the variety of physical label-free techniques of protein detection and characterization which are suitable for application in micro-fluidic structures and analyze the technological and material aspects of label-free biosensors that implement these methods. The most widely used optical and impedance spectroscopy techniques: absorption, fluorescence, surface plasmon resonance, Raman scattering, and interferometry, as well as new trends in photonics are reviewed. The challenges of materials selection, surfaces tailoring in microfluidic structures, and enhancement of the sensitivity and miniaturization of biosensor systems are discussed. The review provides an overview for current advances and future trends in microfluidics integrated technologies for label-free protein biomarkers detection and discusses existing challenges and a way towards novel solutions.

Optical Biosensors for Diagnostics of Infectious Viral Disease: A Recent Update

The design and development of biosensors, analytical devices used to detect various analytes in different matrices, has emerged. Biosensors indicate a biorecognition element with a physicochemical analyzer or detector, i.e., a transducer. In the present scenario, various types of biosensors have been deployed in healthcare and clinical research, for instance, biosensors for blood glucose monitoring. Pathogenic microbes are contributing mediators of numerous infectious diseases that are becoming extremely serious worldwide. The recent outbreak of COVID-19 is one of the most recent examples of such communal and deadly diseases. In efforts to work towards the efficacious treatment of pathogenic viral contagions, a fast and precise detection method is of the utmost importance in biomedical and healthcare sectors for early diagnostics and timely countermeasures. Among various available sensor systems, optical biosensors offer easy-to-use, fast, portable, handy, multiplexed, direct, real-time, and inexpensive diagnosis with the added advantages of specificity and sensitivity. Many progressive concepts and extremely multidisciplinary approaches, including microelectronics, microelectromechanical systems (MEMSs), nanotechnologies, molecular biology, and biotechnology with chemistry, are used to operate optical biosensors. A portable and handheld optical biosensing device would provide fast and reliable results for the identification and quantitation of pathogenic virus particles in each sample. In the modern day, the integration of intelligent nanomaterials in the developed devices provides much more sensitive and highly advanced sensors that may produce the results in no time and eventually help clinicians and doctors enormously. This review accentuates the existing challenges engaged in converting laboratory research to real-world device applications and optical diagnostics methods for virus infections. The review's background and progress are expected to be insightful to the researchers in the sensor field and facilitate the design and fabrication of optical sensors for life-threatening viruses with broader applicability to any desired pathogens.

Highly Ordered Inverse Opal Structures Synthesized from Shape-Controlled Nanocrystal Building Blocks

Three-dimensional ordered porous materials known as inverse opal films (IOFs) were synthesized using nanocrystals with precisely defined morphologies. Comprehensive theoretical and experimental studies of the volume fraction ratio and electrostatic interactions between nanocrystals and polystyrene templating particles enabled the formation of highly ordered crack-free photonic structures. The synthetic strategy was first demonstrated using titanium dioxide (TiO₂ ) nanocrystals of different shapes and then generalized to assemble nanocrystals of other functional materials, such as indium tin oxide and zinc-doped ferrite. Tunable photocatalytic activity of the TiO₂ IOFs, modulated through the choice of the shape of TiO₂ nanocrystals in conjunction with selecting desired macroscopic features of the IOF, was further explored. In particular, enhanced activity is observed for crack-free, highly ordered IOFs whose photonic properties can improve light absorption via the slow light effect. This study opens new opportunities in designing multi-length-scale porous nanoarchitectures having enhanced performance in a variety of applications.

Wetting-Enhanced Structural Color for Convenient and Reversible Encryption of Optical Information

Encrypted storage of optical information has attracted increasing interest for anticounterfeiting, information transmission, and military applications. In this study, an inverse opal-structured titanium dioxide/heptadecafluorodecyltrimethoxysilane (IOS-T/F) panel is developed. Based on a unique wetting-enhanced mechanism of structural color vision derived from a reduced light scattering and strengthened effective refractive index, this panel is capable of reversible writing/erasing and encryption/decryption of optical information. Multiple levels of information can be compiled, concealed, and erased simply using controlled ultraviolet irradiation to form patterned hydrophilic/hydrophobic differences, and the process of revealing or concealing the information only requires a few drops of water or evaporation, respectively. Importantly, the functions of the IOS-T/F panel can be well maintained under harsh conditions, including strongly acidic/alkaline environments or extreme temperatures (from -40 to 80 °C), as well as can be recovered after staining by various pollutants. This system provides simple encryption, rapid decryption, and the ability to store multiple sets of information under diverse application scenarios, which represents a novel material design strategy for security-related applications and smart optical systems.

A comprehensive review on the applications of nano-biosensor-based approaches for non-communicable and communicable disease detection

The outstretched applications of biosensors in diverse domains has become the reason for their attraction for scientific communities. Because they are analytical devices, they can detect both quantitative and qualitative biological components through the generation of detectable signals. In the recent past, biosensors witnessed significant changes and developments in their design as well as features. Nanotechnology has revolutionized sensing phenomena by increasing biodiagnostic capacity in terms of specificity, size, and cost, resulting in exceptional sensitivity and flexibility. The steep increase of non-communicable diseases across the world has emerged as a matter of concern. In parallel, the abrupt outbreak of communicable diseases poses a serious threat to mankind. For decreasing the morbidity and mortality associated with various communicable and non-communicable diseases, early detection and subsequent treatment are indispensable. Detection of different biological markers generates quantifiable signals that can be electrochemical, mass-based, optical, thermal, or piezoelectric. Speculating on the incumbent applicability and versatility of nano-biosensors in large disciplines, this review highlights different types of biosensors along with their components and detection mechanisms. Moreover, it deals with the current advancements made in biosensors and the applications of nano-biosensors in detection of various non-communicable and communicable diseases, as well as future prospects of nano-biosensors for diagnostics.

State-of-the-Art Optical Devices for Biomedical Sensing Applications—A Review

Optical sensors for biomedical applications have gained prominence in recent decades due to their compact size, high sensitivity, reliability, portability, and low cost. In this review, we summarized and discussed a few selected techniques and corresponding technological platforms enabling the manufacturing of optical biomedical sensors of different types. We discussed integrated optical biosensors, vertical grating couplers, plasmonic sensors, surface plasmon resonance optical fiber biosensors, and metasurface biosensors, Photonic crystal-based biosensors, thin metal films biosensors, and fiber Bragg grating biosensors as the most representative cases. All of these might enable the identification of symptoms of deadly illnesses in their early stages; thus, potentially saving a patient’s life. The aim of this paper was not to render a definitive judgment in favor of one sensor technology over another. We presented the pros and cons of all the major sensor systems enabling the readers to choose the solution tailored to their needs and demands.

Detection of chlorantraniliprole residues in tomato using field-deployable MIP photonic sensors

A photonic sensor based on inversed opal molecular imprinted polymer (MIP) film to detect the presence of chlorantraniliprole (CHL) residue in tomatoes was developed. Acrylic acid was polymerized in the presence of CHL inside the structure of a colloidal crystal, followed by etching of the colloids and CHL elution. Colloidal crystals and MIP films were characterized by scanning electron microscopy and FT-IR, confirming the inner structure and chemical structure of the material. MIP films supported on polymethylmethacrylate (PMMA) slides were incubated in aqueous solutions of the pesticide and in blended tomato samples. The MIP sensor displayed shifts of the peak wavelength of the reflection spectra in the visible range when incubated in CHL concentrations between 0.5 and 10 μg L^-1, while almost no peak displacement was observed for non-imprinted (NIP) films. Whole tomatoes were blended into a liquid and spiked with CHL; the sensor was able to detect CHL residues down to 0.5 μg kg^-1, significantly below the tolerance level established by the US Environmental Protection Agency of 1.4 mg kg^-1. Stable values were reached after about 30-min incubation in test samples. Control samples (unspiked processed tomatoes) produced peak shifts both in MIP and NIP films; however, this matrix effect did not affect the detection of CHL in the spiked samples. These promising results support the application of photonic MIP sensors as an economical and field-deployable screening tool for the detection of CHL in crops.