Zeolitic imidazolate framework-8/ fluorinated graphene coated SiO2 composites for pipette tip solid-phase extraction of chlorophenols in environmental and food samples

Mechanochemical synthesis ionic covalent organic frameworks/cotton composites for pipette tip solid-phase extraction of domoic acid in seafood

Pipette tip solid-phase extraction (PT-SPE) as a miniaturized solid-phase extraction technique have a wide range of applications in the field of sample pretreatment. In this study, ionic covalent organic frameworks@cotton (iCOF@cotton) were facilely synthesized by mechanochemical grinding method only in half an hour, and used as the adsorbents of PT-SPE. The synthesized iCOF@cotton not only had high specific surface area, suitable pore structure and cationic charge groups of iCOF that can extract polar targets quickly, but also reduced the problem of high back pressure of PT-SPE by the addition of cotton, thus accelerating extraction time. Combined with high performance liquid chromatographic tandem mass spectrometry (HPLC-MS/MS), an efficient and sensitive method was established for detection of domoic acid (DA, a toxin produced by algae). Under the optimal conditions, the proposed analysis method displayed excellent analytical performance, including broad range of linearity (10-1000 pg mL-1), low limit of detection (LOD, 5 pg mL-1), high correlation coefficient (0.9993), satisfactory precision (RSDs ≤6.4 %). In addition, the developed method was applied to the detection of DA in marine samples, and detected trace DA (18.6 pg mL-1) with satisfactory recovery (85.7%-107.2 %). The above results indicated that the prepared iCOF@cotton have great potential as the adsorbents for PT-SPE.

One-pot synthesis of nano Zr-based metal-organic frameworks for fluorescence determination of quercetin and Hg2

In this study, a nanoscale Zr-based metal-organic framework (nano-Zr-MOF) was prepared by one-pot method using meso-tetra(4-carboxyphenyl)porphyrin as organic ligand and Zr4+ as metal unit. The nanoscale structure endows it with excellent dispersion in water. The nano-Zr-MOF exhibited intense red fluorescence, which could be significantly quenched by the addition of quercetin, probably due to its electron-rich framework. The high selectivity for quercetin detection was verified with analogues and common ions as interfering agents. Moreover, the nano-Zr-MOF could be used as a highly selective and sensitive sensor for the detection of Hg2+. The detection limits for quercetin and Hg2+ were 0.026 μM and 0.039 μM, respectively. This fluorometric method was successfully applied to detect quercetin in red wine and food samples with satisfactory recoveries ranging from 83.7-112.3% and 81.8-115.9%, respectively. The recovery in detection of Hg2+ in lake water were ranging from 97.1-109.2%.

One-step preparation of carboxyl-functionalized porous organic polymer as sorbent for enrichment of phenols in bottled water, juice and honey samples

Herein, a novel carboxyl-functionalized porous organic polymer (COOH-POP) was prepared as sorbent. Due to multiple hydrogen bonds and π-π interactions between COOH-POP and phenols, COOH-POP shows good enrichment ability and very fast adsorption rate for phenols. Then, an analytical method was developed for determination of five phenols (2-chlorophenol, bisphenol A, 2,6-dichlorophenol, 2,4-dichlorophenol and p-tert-butylphenol) in bottled water, lemon juice, peach juice and honey samples using COOH-POP as solid phase extraction sorbent in combination with high performance liquid chromatography. Under optimal conditions, the COOH-POP based method gave the detection limits (S/N = 3) of 0.02-0.10 ng mL-1 for bottled water, 0.03-0.12 ng mL-1 for lemon juice, 0.03-0.25 ng mL-1 for peach juice and 0.7-1.5 ng g-1 for honey samples. The recoveries for spiked samples ranged from 84.0 % to 119.0 % with relative standard deviation less than 7.6 %. This study provides a new yet effective method for enrichment of phenols by designing carboxyl-functionalized porous organic polymer as sorbent.

Covalent organic framework in situ grown on the metal-organic framework as fiber coating for solid-phase microextraction of polycyclic aromatic hydrocarbons in tea

A novel MIL-88-NH2@COF composite was produced by in situ growth of covalent organic framework (COF) on the metal-organic framework (MOF) surface. To obtain a coating fiber for solid-phase microextraction (SPME), the MIL-88-NH2@COF composite physically adhered to the stainless steel wire. Combined with gas chromatography-flame ionization detection (GC-FID), various analytes such as chlorophenols (CPs), phthalates (PAEs), and polycyclic aromatic hydrocarbons (PAHs) were extracted and determined to evaluate the extraction performance of MIL-88-NH2@COF coated fibers and explore their extraction mechanism. This composite exhibit excellent extraction performance and adsorption capacity for various analytes, especially for PAHs with enrichment factor up to 9858. The SPME-GC-FID method based on MIL-88-NH2@COF fiber was established for the determination of five PAHs after the main extraction conditions were optimized. Under optimal conditions, the proposed technique showed a wide linear range (1-150 ng mL-1) with a low limit of detection (0.019 ng mL-1) and a high coefficient of determination (R2 > 0.99). The developed SPME-GC-FID method was used to determine PAHs in green tea and black tea samples, with good recoveries of 51.70-103.64% and 68.56-103.64%, respectively. It is worth mentioning that this is the first time MIL-88-NH2@COF composites have been prepared and applied to SPME. The preparation method of the composite provides a new idea in adsorbent preparation, which will contribute to the field of SPME.

Recent Trends in Graphene-Based Sorbents for LC Analysis of Food and Environmental Water Samples

This review provides an overview of recent advancements in applying graphene-based materials as sorbents for liquid chromatography (LC) analysis. Graphene-based materials are promising for analytical chemistry, including applications as sorbents in liquid chromatography. These sorbents can be functionalized to produce unique extraction or stationary phases. Additionally, graphene-based sorbents can be supported in various materials and have consequently been applied to produce various devices for sample preparation. Graphene-based sorbents are employed in diverse applications, including food and environmental LC analysis. This review summarizes the application of graphene-based materials in food and environmental water analysis in the last five years (2019 to 2023). Offline and online sample preparation methods, such as dispersive solid phase microextraction, stir bar sorptive extraction, pipette tip solid phase extraction, in-tube solid-phase microextraction, and others, are reviewed. The review also summarizes the application of the columns produced with graphene-based materials in separating food and water components and contaminants. Graphene-based materials have been reported as stationary phases for LC columns. Graphene-based stationary phases have been reported in packed, monolithic, and open tubular columns and have been used in LC and capillary electrochromatography modes.

In situ growth of porous organic framework on iron wire for microextraction of polycyclic aromatic hydrocarbons

In this work, a novel spherical metal organic framework (MOF) was first in situ grown on the surface of iron wire (IW), in which IW served as the substrate and metal source for MOF (type NH₂-MIL88) growth without adding additional metal salts in the process, while spherical NH₂-MIL88 provided more active sites for further construction of multifunctional composites. Subsequently, a covalent organic framework (COF) was covalently bonded to the surface of the NH₂-MIL88 to obtain the IW@NH₂-MIL88@COF fibers, which were used for headspace solid-phase microextraction (HS-SPME) of polycyclic aromatic hydrocarbons (PAHs) in milk samples prior to determination by gas chromatography-flame ionization detection (GC-FID). Compared with the fiber prepared by physical coating, the IW@NH₂-MIL88@COF fiber prepared by in situ growth and covalent bonding exhibits better stability and possesses more uniform layer. The extraction mechanism of the IW@NH₂-MIL88@COF fiber for PAHs was discussed, which mainly owed to π-π interactions and hydrophobic interactions. After optimization of the primary extraction conditions, the SPME-GC-FID method was established for five PAHs with a wide linear range (1-200 ng mL^-1), good linearity coefficient (0.9935-0.9987) and low detection limits (0.017-0.028 ng mL^-1). The relative recoveries for PAHs detection in milk samples ranged from 64.69 to 113.97%. This work not only provides new ideas for the in situ growth of other types of MOF, but also provides new methods for the construction of multifunctional composites.

[Advances in enrichment and separation of cis-diol-containing compounds by porous organic frameworks]

The design and synthesis of boronate affinity materials that show high efficiency, high selectivity, and high enrichment performance have gained significant attention. The principle of boronate affinity relies on the reversible covalent reactions, including the formation of stable five-membered or six-membered cyclic esters with cis-diol-containing compounds in alkaline aqueous media and dissociation of cyclic esters in an acidic surrounding to release cis-diol-containing compounds. Recently, various boronate affinity materials have been synthesized and utilized for selective enrichment of these compounds. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have been widely used in chromatographic separation and sample pretreatment because of their adjustable pore size, high porosity, high specific surface area, tunable skeleton structure, and favorable chemical and thermal stability. To promote the enrichment selectivity of MOFs and COFs for cis-diol-containing compounds, boronic acid-functionalized MOFs and COFs with various structures and categories have been synthesized. This review summarizes more than 80 investigations into the categories, synthetic strategies, and applications of boronic acid-functionalized MOFs and COFs from the Science Citation Index. These synthesis methods include metal ligand-fragment co-assembly, post-synthetic modification, and bottom-up modification of boronic acid-functionalized porous materials. Although two modification strategies (post-synthetic and metal ligand-fragment co-assembly) have been introduced for the preparation of boronic acid-functionalized MOFs, the latter is more commonly adopted as it improves the enrichment selectivity and enrichment efficiency of MOFs. The common limitations of MOFs such as aggregation and aperture issues were also resolved. Boron affinity MOFs possessing favorable properties according to the characteristics of cis-diol-containing compounds, have also been synthesized. Furthermore, to facilitate enrichment and separation, many boronic acid-functionalized magnetic material MOFs have been developed for the enrichment and analysis of cis-diol-containing compounds. Additionally, the luminescent properties of Ln-MOFs have been used in combination with boronic acid affinity for the enrichment, separation, and subsequent detection of cis-diol-containing compounds. Post-synthetic modification and the bottom-up strategy are the primary methods for the preparation of boronic acid-functionalized COFs. Boronic acid-functionalized COFs are less investigated than boronic acid-functionalized MOFs, likely due to the greater complexity of COF synthesis. This work aims to summarize the research advances, synthesis ideas, and synthesis methods related to boric acid-functionalized porous organic frameworks, which will provide theoretical guidance and technical support for its applications while accelerating the commercialization of such organic frameworks.

A review of the modern principles and applications of solid-phase extraction techniques in chromatographic analysis

Analytical processes involving sample preparation, separation, and quantifying analytes in complex mixtures are indispensable in modern-day analysis. Each step is crucial to enriching correct and informative results. Therefore, sample preparation is the critical factor that determines both the accuracy and the time consumption of a sample analysis process. Recently, several promising sample preparation approaches have been made available with environmentally friendly technologies with high performance. As a result of its many advantages, solid-phase extraction (SPE) is practiced in many different fields in addition to the traditional methods. The SPE is an alternative method to liquid–liquid extraction (LLE), which eliminates several disadvantages, including many organic solvents, a lengthy operation time and numerous steps, potential sources of error, and high costs. SPE advanced sorbent technology reorients with various functions depending on the structure of extraction sorbents, including reversed-phase, normal-phase, cation exchange, anion exchange, and mixed-mode. In addition, the commercial SPE systems are disposable. Still, with the continual developments, the restricted access materials (RAM) and molecular imprinted polymers (MIP) are fabricated to be active reusable extraction cartridges. This review will discuss all the theoretical and practical principles of the SPE techniques, focusing on packing materials, different forms, and performing factors in recent and future advances. The information about novel methodological and instrumental solutions in relation to different variants of SPE techniques, solid-phase microextraction (SPME), in-tube solid-phase microextraction (IT-SPME), and magnetic solid-phase extraction (MSPE) is presented. The integration of SPE with analytical chromatographic techniques such as LC and GC is also indicated. Furthermore, the applications of these techniques are discussed in detail along with their advantages in analyzing pharmaceuticals, biological samples, natural compounds, pesticides, and environmental pollutants, as well as foods and beverages.

MIL-88B(Fe)/cellulose microspheres as sorbent for the fully automated dispersive pipette extraction towards trace sulfonamides in milk samples prior to UPLC-MS/MS analysis

MIL-88B(Fe)/cellulose microspheres (MIL-88B(Fe)/CMs) were characterized by the means of SEM, XRD, TGA and N₂ adsorption-desorption test. The composite was used as the sorbent for fully automated dispersive pipette extraction (DPX), after introducing CMs as the support, the loss of MIL-88B(Fe) in DPX was avoided. Coupled to UPLC-MS/MS, the proposed method was employed for the analysis of trace sulfonamides (SAs) in milk samples. The parameters affecting the extraction efficiency, including pH of sample solution, the rate of aspiration and dispense, amount of the adsorbent, type and volume of elution solvent were optimized. Under the optimal conditions, good linearity (r ≥ 0.9978 for five analytes), high sensitivity (limit of detection: 0.00660-0.0136 μg kg^-1) and satisfactory recovery (69.8%-100.9%) were achieved. Furthermore, the sorbent showed desirable reusability over eight extraction cycles. Compared with other methods for the pretreatment of SAs, the proposed method showed advantages of high sensitivity, less sorbent consumption, environmental friendliness and automation, providing a promising protocol for sample preparation.

Facile fabrication of hydroxyl-functionalized hypercrosslinked polymer for sensitive determination of chlorophenols

Three hydroxyl-functionalized hypercrosslinked polymers (HCP-POL, HCP-HQ and HCP-PG) were synthesized by Friedel-Crafts reaction. The HCP-HQ displayed the largest surface area and highest adsorption capacity for chlorophenols (CPs). Thus, the HCP-HQ was further modified with magnetism to obtain M-HCP-HQ. An efficient magnetic solid-phase extraction method with M-HCP-HQ as adsorbent was developed for the first time to simultaneously extract four CPs from water and honey samples before analysis by high performance liquid chromatography-diode array detection. Under optimized conditions, the low detection limits (S/N = 3) were obtained to be 0.06-0.10 ng mL^-1 for water and 0.80-1.75 ng g^-1 for honey. The method recovery was 80.7%-119%, with relative standard deviations below 9.5%. The enrichment factors of the CPs were in the range of 57-220. The extraction mechanism could be attributed to the strong polar interaction, hydrogen bonding and π-π interactions between the M-HCP-HQ and CPs. The M-HCP-HQ based method can be served as a reliable and sensitive tool for detection CPs in water and honey samples.

A Review on the Foodomics Based on Liquid Chromatography Mass Spectrometry

Due to the globalization of food production and distribution, the food chain has become increasingly complex, making it more difficult to evaluate unexpected food changes. Therefore, establishing sensitive, robust, and cost-effective analytical platforms to efficiently extract and analyze the food-chemicals in complex food matrices is essential, however, challenging. LC/MS-based metabolomics is the key to obtain a broad overview of human metabolism and understand novel food science. Various metabolomics approaches (e.g., targeted and/or untargeted) and sample preparation techniques in food analysis have their own advantages and limitations. Selecting an analytical platform that matches the characteristics of the analytes is important for food analysis. This review highlighted the recent trends and applications of metabolomics based on "foodomics" by LC-MS and provides the perspectives and insights into the methodology and various sample preparation techniques in food analysis.

Macro-microporous zeolitic imidazole framework-8/cellulose aerogel for semi-automated pipette tip solid phase extraction of fluoroquinolones in water

In this study, Zeolitic Imidazole Framework-8/cellulose aerogel (ZIF-8/CA) hybrid was successfully fabricated through a simple doping method and ZIF-8 acted as the major component for adsorption. In order to elucidate the adsorption mechanism deeply, molecular simulation was adopted to the expound the interaction modes between ZIF-8 and the fluoroquinolones (FQs). ZIF-8/CA was used as the adsorbent for semi-automated pipette tip solid phase extraction (PT-SPE). In combination with high performance liquid chromatography tandem fluorescence detector (HPLC-FLD), the established method was successfully employed to determine trace amount of FQs in water samples. Extraction parameters such as the content of ZIF-8, pH of sample solution, volume of sample, flow rate of sampling, type and volume of elution solvent were investigated. Under the optimized conditions, satisfactory linearity was achieved with the correlation coefficient (R²) ranging from 0.9954 to 0.9992. The limits of detection were in the range of 0.337-1.707 ng L^-1. And the recoveries varied from 75.9% to 96.8% with RSD less than 8.0%. The established method was demonstrated to be sensitive, efficient and convenient.