A green deep eutectic solvent modified magnetic titanium dioxide nanoparticles for the solid-phase extraction of chymotrypsin

A facile colorimetric sensor for ketoprofen detection in milk: Integrating molecularly imprinted polymers with Cu-doped Fe3O4 nanozymes

A facile and efficient detection method is required to address the potential health risks of ketoprofen (KP) in animal-derived foods. Herein, we integrated molecularly imprinted polymers (MIPs) with Cu-doped Fe3O4 nanozymes (Fe3O4-Cu) to develop a selective colorimetric sensor for KP detection. Chitosan and glutaraldehyde were used as functional monomers and cross-linkers to fabricate proposed the MIPs@Fe3O4-Cu. On KP addition, it was specifically captured by the imprinted cavities, thereby blocking the channels between chromogenic substrates and Fe3O4-Cu. Based on this rationale, a selective colorimetric sensor utilizing MIPs@Fe3O4-Cu was established, exhibiting a linear range of 0.25-100 μM and a detection limit of 0.073 μM. The developed method was validated through its application in milk samples, yielding satisfactory recoveries with low relative standard deviations. This efficient and selective colorimetric sensor holds immense significance for KP detection in complex samples.

Deep insight into selective adsorption behavior and mechanism of novel deep eutectic solvent functionalized bio-sorbent towards methcathinone: Experiments and DFT calculation

This work designed and synthesized novelly selective, highly efficient and friendly environmental biochar nanomaterial (ZMBC@ChCl-EG) by screening suitable deep eutectic solvent (DES) as the functional monomer via Density Functional Theory (DFT). The prepared ZMBC@ChCl-EG achieved the highly efficient adsorption of methcathinone (MC) and exhibited excellent selectivity as well as good reusability. Selectivity analysis concluded that the distribution coefficient value (K_D) of ZMBC@ChCl-EG towards MC was 3.247 L/g, which was about 3 times higher than that of ZMBC, corresponding to stronger selective adsorption capacity. The studies of isothermal and kinetics indicated that ZMBC@ChCl-EG had an excellent adsorption capacity towards MC and the adsorption was mainly chemically controlled. In addition, DFT was used to calculate the binding energies between MC and each component. The binding energies were -10.57 kcal/mol for ChCl-EG/MC, -3.15∼-9.51 kcal/mol for BCs/MC, -2.33 kcal/mol for ZIF-8/MC, respectively, suggesting that DES played a major role in enhancing methcathinone adsorption. Lastly, the adsorption mechanisms were revealed by variables experiment combined with characterizations and DFT calculation. The main mechanisms were hydrogen bonding and π-π interaction.

Simultaneous determination of Co and Pb in P. polyphylla var. yunnanensis by ICP-OES after GO-TiO2-DES-based dispersive micro solid phase extraction

In this work, deep eutectic solvent (DES) was used to modify GO-TiO₂ to synthesize new adsorption material GO-TiO₂-DES nanocomposites. It was first used for dispersive micro solid phase extraction (DMSPE) and combined with inductively coupled plasma optical emission spectrometry (ICP-OES) for simultaneous determination of trace cobalt (Co) and lead (Pb) in natural medicine P. polyphylla var. yunnanensis. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), and the Brunauer-Emmett-Teller (BET) specific surface area were used to characterize. The results showed that GO-TiO₂-DES nanocomposites were successfully prepared and had better adsorption effect on metal ions. The factors affecting the extraction and elution of Co and Pb were optimized, including the type of DES, pH, adsorption time, amount of adsorbent, adsorption temperature, and elution time. Under the optimum conditions, the enhancement factors (EFs) of Co and Pb were 31 and 28, the limits of detection (LODs) were 0.11 and 0.24 μg L^-1, and the limits of quantification (LOQs) were 0.36 and 0.82 μg L^-1, respectively. The results of Co and Pb determined by the established method were in good agreement with those of inductively coupled plasma mass spectrometry (ICP-MS), which verified the accuracy and reliability of the method.

Biomass-derived magnetic nanocomposites modified by choline chloride/citric acid based natural deep eutectic solvents for the magnetic solid phase extraction of trypsin

A novel biomass-derived magnetic nanocomposite of Fe₃O₄-Chitin@NADES-CC composed of a natural deep eutectic solvent (NADES), biological polysaccharide (Chitin) and magnetic Fe₃O₄ was synthesized. After being systematically characterized by Fourier transform infrared spectrometry, thermogravimetry, vibrating sample magnetometry, X-ray diffraction, transmission electron microscopy and dynamic light scattering, Fe₃O₄-Chitin@NADES-CC was used as an extractant to separate trypsin (Tryp) on the basis of magnetic solid phase extraction. Simultaneously, the extraction conditions of Fe₃O₄-Chitin@NADES-CC for Tryp were investigated in turn by single-factor experiments, including screening the types of extractants, the initial concentration of Tryp, the pH value of the solution, the influence of ionic strength, extraction time and temperature, etc. Under the optimal conditions, the extraction capacity of Fe₃O₄-Chitin@NADES-CC for Tryp could reach up to 1082.67 mg g^-1. Adsorption isotherm tests certified that the Langmuir adsorption equilibrium fitted well with the extraction model in this study, which showed that the extraction of Fe₃O₄-Chitin@NADES-CC for Tryp was monolayer adsorption. In addition, in the sections on the regeneration-reuse, selectivity and methodological studies, all the results exhibited the superiority of the Fe₃O₄-Chitin@NADES-CC and Tryp separation strategy which has been established in this work. Finally, Fe₃O₄-Chitin@NADES-CC was ultimately applied to the separation of Tryp from a real bovine pancreas crude extract by the analysis of SDS-PAGE. All the above results highlight that the proposed Fe₃O₄-Chitin@NADES-CC biomass-derived magnetic nanocomposite can be applied in the field of protein purification.

Application of deep eutectic solvents in protein extraction and purification

Deep eutectic solvents (DESs) are a mixture of hydrogen bond donor (HBD) and hydrogen bond acceptor (HBA) molecules that can consist, respectively, of natural plant metabolites such as sugars, carboxylic acids, amino acids, and ionic molecules, which are for the vast majority ammonium salts. Media such as DESs are modular tools of sustainability that can be pointed toward the extraction of bioactive molecules due to their excellent physicochemical properties, their relatively low price, and accessibility. The present review focuses on the application of DESs for protein extraction and purification. The in-depth effects and principles that apply to DES-mediated extraction using various renewable biomasses will be discussed as well. One of the most important observations being made is that DESs have a clear ability to maintain the biological and/or functional activity of the extracted proteins, as well as increase their stability compared to traditional solvents. They demonstrate true potential for a reproducible but more importantly, scalable protein extraction and purification compared to traditional methods while enabling waste valorization in some particular cases.

Excellent performance separation of trypsin by novel ternary magnetic composite adsorbent based on betaine-urea- glycerol natural deep eutectic solvent modified MnFe2O4-MWCNTs

The effective trypsin purification methods should be established since trypsin plays a crucial role in biosome. In this work, a novel ternary magnetic composite adsorbent (MnFe₂O₄-MWCNTs@B-U-G) with the features of strong specific selectivity, good adsorption effect, simple and efficient separation process, no secondary pollution brought in was prepared by integrating the superior physicochemical properties of ternary based natural deep eutectic solvent, multi-walled carbon nanotubes and MnFe₂O₄. The property, composition and microtopography structure of MnFe₂O₄-MWCNTs@B-U-G were characterized in detail. Combined with magnetic solid-phase extraction, MnFe₂O₄-MWCNTs@B-U-G was utilized to adsorb trypsin. Response surface methodology experiment was prepared under Box-Behnken design to optimize the adsorption conditions and the results showed that the practical maximum adsorption capacity for trypsin was 1020.1 mg g^-1. Besides, the adsorption isotherms, adsorption kinetics, regeneration studies and method validation studies were investigated systematically to evaluate the established adsorption separation system. Mechanism exploration proved that electrostatic interaction, hydrogen bonding interaction and chelation interaction were the dominant forces for the high-performance adsorption of trypsin. The activity of trypsin after elution had been analyzed by UV-vis spectrophotometer and CD spectrometer with three methods, which illustrated that the enzyme activity, conformation and secondary structure of trypsin did not change significantly during the adsorption-desorption process. In addition, the proposed method was successful and practical applicability to isolation trypsin from crude bovine pancreas. As a result, due to the superiority of the MnFe₂O₄-MWCNTs@B-U-G, the proposed method not only exhibites high-performance adsorption of trypsin, but also provides a green and sustainable potential value in the adsorption of biomacromolecule.

Recent Advances in the Synthesis of Inorganic Materials Using Environmentally Friendly Media

Deep Eutectic Solvents have gained a lot of attention in the last few years because of their vast applicability in a large number of technological processes, the simplicity of their preparation and their high biocompatibility and harmlessness. One of the fields where DES prove to be particularly valuable is the synthesis and modification of inorganic materials-in particular, nanoparticles. In this field, the inherent structural inhomogeneity of DES results in a marked templating effect, which has led to an increasing number of studies focusing on exploiting these new reaction media to prepare nanomaterials. This review aims to provide a summary of the numerous and most recent achievements made in this area, reporting several examples of the newest mixtures obtained by mixing molecules originating from natural feedstocks, as well as linking them to the more consolidated methods that use "classical" DES, such as reline.