Directed evolution of the dioxygenase complex for the synthesis of furanone flavor compounds

Engineering of Rieske dioxygenase variants with improved cis-dihydroxylation activity for benzoates

Rieske dioxygenases have a long history of being utilized as green chemical tools in the organic synthesis of high-value compounds, due to their capacity to perform the cis-dihydroxylation of a wide variety of aromatic substrates. The practical utility of these enzymes has been hampered however by steric and electronic constraints on their substrate scopes, resulting in limited reactivity with certain substrate classes. Herein, we report the engineering of a widely used member of the Rieske dioxygenase class of enzymes, toluene dioxygenase (TDO), to produce improved variants with greatly increased activity for the cis-dihydroxylation of benzoates. Through rational mutagenesis and screening, TDO variants with substantially improved activity over the wild-type enzyme were identified. Homology modeling, docking studies, molecular dynamics simulations, and substrate tunnel analysis were applied in an effort to elucidate how the identified mutations resulted in improved activity for this polar substrate class. These analyses revealed modification of the substrate tunnel as the likely cause of the improved activity observed with the best-performing enzyme variants.

Purification and characterization of a Rieske oxygenase and its NADH-regenerating partner proteins

The Rieske non-heme iron oxygenases (Rieske oxygenases) comprise a class of metalloenzymes that are involved in the biosynthesis of complex natural products and the biodegradation of aromatic pollutants. Despite this desirable catalytic repertoire, industrial implementation of Rieske oxygenases has been hindered by the multicomponent nature of these enzymes and their requirement for expensive reducing equivalents in the form of a reduced nicotinamide adenine dinucleotide cosubstrate (NAD(P)H). Fortunately, however, some Rieske oxygenases co-occur with accessory proteins, that through a downstream reaction, recycle the needed NAD(P)H for catalysis. As these pathways and accessory proteins are attractive for bioremediation applications and enzyme engineering campaigns, herein, we describe methods for assembling Rieske oxygenase pathways in vitro. Further, using the TsaMBCD pathway as a model system, in this chapter, we provide enzymatic, spectroscopic, and crystallographic methods that can be adapted to explore both Rieske oxygenases and their co-occurring accessory proteins.

Rieske Oxygenases and Other Ferredoxin-Dependent Enzymes: Electron Transfer Principles and Catalytic Capabilities

Enzymes that depend on sophisticated electron transfer via ferredoxins (Fds) exhibit outstanding catalytic capabilities, but despite decades of research, many of them are still not well understood or exploited for synthetic applications. This review aims to provide a general overview of the most important Fd-dependent enzymes and the electron transfer processes involved. While several examples are discussed, we focus in particular on the family of Rieske non-heme iron-dependent oxygenases (ROs). In addition to illustrating their electron transfer principles and catalytic potential, the current state of knowledge on structure-function relationships and the mode of interaction between the redox partner proteins is reviewed. Moreover, we highlight several key catalyzed transformations, but also take a deeper dive into their engineerability for biocatalytic applications. The overall findings from these case studies highlight the catalytic capabilities of these biocatalysts and could stimulate future interest in developing additional Fd-dependent enzyme classes for synthetic applications.

Development and application of a high throughput assay system for the detection of Rieske dioxygenase activity

Herein we report the development of a new periodate-based reactive assay system for the fluorescent detection of the cis-diol metabolites produced by Rieske dioxygenases. This sensitive and diastereoselective assay system successfully evaluates the substrate scope of Rieske dioxygenases and determines the relative activity of a rationally designed Rieske dioxygenase variant library. The high throughput capacity of the assay system enables rapid and efficient substrate scope investigations and screening of large dioxygenase variant libraries.

DBU-Mediated Addition of α-Nitroketones to α-Cyano-enones and α,β-Unsaturated α-Ketoesters: Synthesis of Dihydrofurans and Conjugated Dienes

1,8-Diazabicyclo[5.4.0]undec-7-ene-mediated reactions of α-nitroketones with α-cyano-enones and α,β-unsaturated α-ketoesters have been developed. The products, namely, dihydrofurans and conjugated dienes, were isolated in moderate to good yields, and a range of substitutions were tolerated.

A systematic optimization of styrene biosynthesis in Escherichia coli BL21(DE3)

BACKGROUND

Styrene is a versatile commodity petrochemical used as a monomer building-block for the synthesis of many useful polymers. Although achievements have been made on styrene biosynthesis in microorganisms, several bottleneck problems limit factors for further improvement in styrene production.

RESULTS

A two-step styrene biosynthesis pathway was developed and introduced into Escherichia coli BL21(DE3). Systematic optimization of styrene biosynthesis, such as enzyme screening, codon and plasmid optimization, metabolic flow balance, and in situ fermentation was performed. Candidate isoenzymes of the rate-limiting enzyme phenylalanine ammonia lyase (PAL) were screened from Arabidopsis thaliana (AtPAL2), Fagopyrum tataricum (FtPAL), Petroselinum crispum (PcPAL), and Artemisia annua (AaPAL). After codon optimization, AtPAL2 was found to be the most effective one, and the engineered strain was able to produce 55 mg/L styrene. Subsequently, plasmid optimization was performed, which improved styrene production to 103 mg/L. In addition, two upstream shikimate pathway genes, aroF and pheA, were overexpressed in the engineered strain, which resulted in styrene production of 210 mg/L. Subsequently, combined overexpression of tktA and ppsA increased styrene production to 275 mg/L. Finally, in situ product removal was used to ease the burden of end-product toxicity. By using isopropyl myristate as a solvent, styrene production reached a final titer of 350 mg/L after 48 h of shake-flask fermentation, representing a 636% improvement, which compared with that achieved in the original strain.

CONCLUSIONS

This present study achieved the highest titer of de novo production of styrene in E. coli at shake-flask fermentation level. These results obtained provided new insights for the development of microbial production of styrene in a sustainable and environment friendly manner.

Thermophilic bacteria are potential sources of novel Rieske non-heme iron oxygenases

Rieske non-heme iron oxygenases, which have a Rieske-type [2Fe-2S] cluster and a non-heme catalytic iron center, are an important family of oxidoreductases involved mainly in regio- and stereoselective transformation of a wide array of aromatic hydrocarbons. Though present in all domains of life, the most widely studied Rieske non-heme iron oxygenases are found in mesophilic bacteria. The present study explores the potential for isolating novel Rieske non-heme iron oxygenases from thermophilic sources. Browsing the entire bacterial genome database led to the identification of 45 homologs from thermophilic bacteria distributed mainly among Chloroflexi, Deinococcus-Thermus and Firmicutes. Thermostability, measured according to the aliphatic index, showed higher values for certain homologs compared with their mesophilic relatives. Prediction of substrate preferences indicated that a wide array of aromatic hydrocarbons could be transformed by most of the identified oxygenase homologs. Further identification of putative genes encoding components of a functional oxygenase system opens up the possibility of reconstituting functional thermophilic Rieske non-heme iron oxygenase systems with novel properties.

Absorption of 3(2H)-furanones by human intestinal epithelial Caco-2 cells

A number of 3(2H)-furanones are synthesized by fruits and have been found in cooked foodstuffs, where they impart flavor and odor because of their low perception thresholds. They show genotoxic properties in model studies but are also ranked among the antioxidants and anticarcinogens. This study examined the efficiency of intestinal absorption and metabolic conversion of 3(2H)-furanones by using Caco-2 cell monolayers as an intestinal epithelial cell model. The permeability of each agent was measured in both the apical to basal and basal to apical directions. 2,5-Dimethyl-4-methoxy-3(2H)-furanone (DMMF) showed the highest absorption rate in all experiments, while similar amounts of 4-hydroxy-2,5-dimethyl-3(2H)-furanone (HDMF), 4-hydroxy-2(or 5)-ethyl-5(or 2)-methyl-3(2H)-furanone (HEMF), and 4-hydroxy-5-methyl-3(2H)-furanone (HMF) were taken up. HDMF-glucoside was almost not absorbed but was hydrolyzed to a small extent. The transport of 3(2H)-furanones could not be saturated even at levels of 500 microM and occurred in both directions. Because the uptake was only slightly reduced by apical hyperosmolarity, passive diffusion by paracellular transport is proposed.

Identification of amino acid residues involved in 4-chloroindole 3-hydroxylation by cytochrome P450 2A6 using screening of random libraries

Cytochrome P450 (P450) 2A6 is able to catalyze indole hydroxylation to form the blue dye indigo. The wild-type P450 2A6 enzyme was randomly mutated throughout the whole open reading frame and screened using 4-chloroindole hydroxylation, a substituted indole selected from 30 indole compounds for enhanced color development. Mutants with up to 5-fold increases of catalytic efficiency (k(cat)/K(m)) and 2-fold increases in k(cat) were selected after two rounds of screening. Important residues located both in (e.g., Thr305) and outside the active site (e.g., Ser224) were identified. The study utilized a better substrate for "indigo assay" to obtain new information on the structure-functional relationship of P450 2A6 that was not revealed by previous mutagenesis studies with this enzyme.

Enzyme-Catalysed Synthesis and Absolute Configuration Assignments ofcis-Dihydrodiol Metabolites from 1,4-Disubstituted Benzenes

A series of ten cis-dihydrodiol metabolites has been obtained by bacterial biotransformation of the corresponding 1,4-disubstituted benzene substrates using Pseudomonas putida UV4, a source of toluene dioxygenase (TDO). Their enantiomeric excess (ee) values have been established using chiral stationary phase HPLC and 1H NMR spectroscopy. Absolute configurations of the majority of cis-dihydrodiols have been established using stereochemical correlation and X-ray crystallography and the remainder have been tentatively assigned using NMR spectroscopic methods but finally confirmed by circular dichroism (CD) spectroscopy. These configurational assignments support and extend the validity of an empirical model, previously used to predict the preferred stereochemistry of TDO-catalysed cis-dihydroxylation of ten 1,4-disubstituted benzene substrates, to more than twenty-five examples.

Arene cis-dihydrodiol formation: from biology to application

The range of available arene dihydroxylating dioxygenase enzymes, their structure and mechanism, and recent examples of the application of arene cis-dihydrodiol bioproducts as chiral precursors in the synthesis of natural and unnatural products and chiral ligands are discussed.

Directed evolution of biocatalytic processes

The benefits of applying biocatalysts to organic synthesis, such as their high chemo-, regio-, and enantio-specificity and selectivity, must be seriously considered, especially where chemical routes are unavailable, complex or prohibitively expensive. In cases where a potential biocatalytic route is not yet efficient enough to compete with chemical synthesis, directed evolution, and/or process engineering could be implemented for improvements. While directed evolution has demonstrated great potential to enhance enzyme properties, there will always be some aspects of biocatalytic processes that it does not address. Even where it can be successfully applied, the resources required for its implementation must currently be weighed against the feasibility of, and resources available for developing a chemical synthesis route. Here, we review the potential of combining directed evolution with process engineering, and recent developments to improve their implementation. Favourable targets for the directed evolution of new biocatalysts are the syntheses of highly complex molecules, especially where chemistry, metabolic engineering or recombineering provide a partial solution. We also review some of the recent advances in the application of these approaches alongside the directed evolution of biocatalysts.