Lead structures for applications in photodynamic therapy. Part 1: Synthesis and variation of m-THPC (Temoporfin) related amphiphilic A2BC-type porphyrins

Fine-tuning of radiative properties by "mild" substituents: searching for a perfectly soft chromophore

Controlling spectral properties to achieve desired characteristics is an attractive goal in application-oriented research, e.g., in the design of fluorescence sensors. "Soft" chromophores, molecules with strong spectral responses to internal or external perturbations are good candidates for such studies. In this work, absorption, fluorescence, and magnetic circular dichroism (MCD) spectra were obtained for a series of porphyrins, substituted at the meso-positions with n-hexyl groups. As the number of substituents increases from 1 to 4, significant changes are observed. The intensity of the S0-S1 transition (Qx) in the 0-0 region strongly decreases in mono-substituted porphyrin, but upon additional substitutions it increases to values larger than in the parent, unsubstituted molecule. Such behavior can be explained, using the perimeter model, by changes in the energy splittings between the two highest (HOMO) and two lowest (LUMO) frontier molecular orbitals. Single substitution makes porphyrin a nearly perfect soft chromophore, but upon introduction of a larger number of n-hexyl groups it is transformed into a hard one. DFT simulations incorrectly predict a continuous transition from a soft to hard chromophore, because the calculated ordering of two HOMO orbitals is opposite to that obtained by experiment. On the other hand, for those porphyrins that can be classified as hard chromophores, the calculations nicely reproduce contributions of Franck-Condon and Herzberg-Teller terms to absorption and fluorescence spectra.

meso-Tetrahexyl-7,8-dihydroxychlorin and Its Conversion to ß-Modified Derivatives

meso-Tetrahexylporphyrin was converted to its corresponding 7,8-dihydroxychlorin using an osmium tetroxide-mediated dihydroxylation strategy. Its diol moiety was shown to be able to undergo a number of subsequent oxidation reactions to form a chlorin dione and porpholactone, the first meso-alkylporphyrin-based porphyrinoid containing a non-pyrrolic building block. Further, the diol chlorin was shown to be susceptible to dehydration, forming the porphyrin enol that is in equilibrium with its keto-chlorin form. The meso-hexylchlorin dione could be reduced and it underwent mono- and bis-methylation reactions using methyl-Grignard reagents, and trifluoromethylation using the Ruppert-Prakash reagent. The optical and spectroscopic properties of the products are discussed and contrasted to their corresponding meso-aryl derivatives (where known). This contribution establishes meso-tetrahexyl-7,8-dihydroxychlorins as a new and versatile class of chlorins that is susceptible to a broad range of conversions to generate functionalized chlorins and a pyrrole-modified chlorin analogue.

Amphiphilic Protoporphyrin IX Derivatives as New Photosensitizing Agents for the Improvement of Photodynamic Therapy

Photodynamic therapy (PDT) is a non-invasive therapeutic modality based on the interaction between a photosensitive molecule called photosensitizer (PS) and visible light irradiation in the presence of oxygen molecule. Protoporphyrin IX (PpIX), an efficient and widely used PS, is hampered in clinical PDT by its poor water-solubility and tendency to self-aggregate. These features are strongly related to the PS hydrophilic–lipophilic balance. In order to improve the chemical properties of PpIX, a series of amphiphilic PpIX derivatives endowed with PEG₅₅₀ headgroups and hydrogenated or fluorinated tails was synthetized. Hydrophilic–lipophilic balance (HLB) and log p-values were computed for all of the prepared compounds. Their photochemical properties (spectroscopic characterization, photobleaching, and singlet oxygen quantum yield) were also evaluated followed by the in vitro studies of their cellular uptake, subcellular localization, and photocytotoxicity on three tumor cell lines (4T1, scc-U8, and WiDr cell lines). The results confirm the therapeutic potency of these new PpIX derivatives. Indeed, while all of the derivatives were perfectly water soluble, some of them exhibited an improved photodynamic effect compared to the parent PpIX.

Strong two-photon absorption and ultrafast dynamics of meso-functionalized "push-pull"trans-A2BC porphyrins

A new series of "push-pull"meso-substituted trans-A₂BC porphyrins, where A = mesityl, B = phenothiazine (push) and C = o/p-nitrophenyl moiety (pull) and M = 2H, Ni(ii), Cu(ii), and Zn(ii), were synthesized. These trans-A₂BC porphyrins were characterized by various techniques viz. UV-Vis, fluorescence and NMR spectroscopy, matrix assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry, cyclic voltammetry, single-crystal X-ray diffraction analysis and density functional theory (DFT) studies. The single crystal structure of the newly synthesized free base trans-H₂A₂BC porphyrin (2) revealed the orientation of meso-substituents and the planar conformation of the porphyrin core. All newly synthesized free base trans-H₂A₂BC porphyrins (1 or 2) and their metal complexes exhibited a sharp Soret band. The first reduction potential of all synthesized trans-MA₂BC porphyrins showed an anodic shift as compared with that of meso-tetraphenylporphyrins (MTPPs) due to the strong electron withdrawing nature of the nitrophenyl group. In general, the first oxidation potential of trans-MA₂BC porphyrins shows a cathodic shift due to the electron donating phenothiazine moiety as compared to that of MTPPs. p-Nitrophenyl appended trans-A₂BC porphyrins exhibited large ground state dipole moment values (8.59-9.64 D) as compared to MTPPs (0.0013-0.052 D) owing to the polarized "push-pull" effect of meso-substituents such as phenothiazine (push) and nitrophenyl (pull) moieties. Femtosecond nonlinear optical (NLO) studies performed with kHz pulses at 800 nm revealed strong two-photon absorption coefficients (∼0.082-0.0953 cm GW^-1) and cross-sections (∼1.71-1.95 × 10³ GM) for these "push-pull" porphyrins. We have also attempted to understand the NLO coefficients in terms of the structural changes in these porphyrin derivatives. A comparison that has been accomplished with similar porphyrin molecules and under similar experimental conditions revealed the superior performance of the title molecules. Furthermore, femtosecond transient absorption studies demonstrated several ultrafast processes from various excited states in these porphyrins, useful for identifying the processes relevant to optical switching applications.

Classic highlights in porphyrin and porphyrinoid total synthesis and biosynthesis

Porphyrins feature prominently in nature, be it as enzymatic cofactors, electron and exciton shuffles, as photoactive dyes, or as signaling substances. Their involvement in the generation, storage and use of oxygen is pivotal to life, while their photochemical properties are central to the biochemical functioning of plants. When complexed to metals, porphyrins can engage in a multitude of contemporary applications ranging from solar energy generation to serving as catalysts for important chemical reactions. They are also able to function as useful theranostic agents, and as novel materials for a wide range of applications. As such, they are widely considered to be highly valuable molecules, and it almost goes without saying that synthetic organic chemistry has dramatically underpinned all the key advances made, by providing reliable access to them. In fact, strategies for the synthesis of functionalized porphyrins have now reached a state of refinement where pretty well any desired porphyrin can successfully be synthesized with the approaches that are available, including a cornucopia of related macrocycle-modified porphyrinoids. In this review, we are going to illustrate the development of this exciting field by discussing a number of classic syntheses of porphyrins. Our coverage will encompass the natural protoporphyrins and chlorophylls, while also covering general strategies for the synthesis of unsymmetrical porphyrins and chlorins. Various industrial syntheses of porphyrins will also be discussed, as will other routes of great practical importance, and avenues to key porphyrinoids with modified macrocycles. A range of selected examples of contemporary functionalization reactions will be highlighted. The various key syntheses will be described and analyzed from a traditional mechanistic organic chemistry perspective to help student readers, and those who are new to this area. The aim will be to allow readers to mechanistically appreciate and understand how many of these fascinating ring-systems are built and further functionalized.

Nucleophilic Aromatic Substitution (SNAr) and Related Reactions of Porphyrinoids: Mechanistic and Regiochemical Aspects

The nucleophilic substitution of aromatic moieties (SNAr) has been known for over 150 years and found wide use for the functionalization of (hetero)aromatic systems. Currently, several "types" of SNAr reactions have been established and notably the area of porphyrinoid macrocycles has seen many uses thereof. Herein, we detail the SNAr reactions of seven types of porphyrinoids with differing number and type of pyrrole units: subporphyrins, norcorroles, corroles, porphyrins, azuliporphyrins, N-confused porphyrins, and phthalocyanines. For each we analyze the substitution dependent upon: a) the type of nucleophile and b) the site of substitution (α, β, or meso). Along with this we evaluate this route as a synthetic strategy for the generation of unsymmetrical porphyrinoids. Distinct trends can be identified for each type of porphyrinoid discussed, regardless of nucleophile. The use of nucleophilic substitution on porphyrinoids is found to often be a cost-effective procedure with the ability to yield complex substituent patterns, which can be conducted in non-anhydrous solvents with easily accessible simple porphyrinoids.

Weak Interactions and Conformational Changes in Core-Protonated A2- and Ax-Type Porphyrin Dications

Individual chemical motifs are known to introduce structural distortions to the porphyrin macrocycle, be it in the core or at the periphery of the macrocycle. The interplay when introducing two or more of these known structural motifs has been scarcely explored and is not necessarily simply additive; these structural distortions have a chance to compound or negate to introduce new structural types. To this end, a series of compounds with complementary peripheral (5,15-disubstitution) and core (acidification) substitution patterns were investigated. The single-crystal X-ray structures of 18 5,15-diphenylporphyrin, 5,15-diphenylporphyrindi-ium diacid, and related compounds are reported, including the first example of a 5,15-dialkylporphyrindi-ium. Normal-coordinate structural decomposition (NSD) analysis is used for a detailed analysis of the conformation of the porphyrin subunit within the crystal structures. An elongation of porphyrin macrocycles along the C₅,C₁₅- axis (B_2g symmetry) is observed in all of the free base porphyrins and porphyrin dications; distance across the core is around 0.3 Å in the free base and diacid compounds, and more than doubled in 5,15-dipentylporphyrin and 5,15-dipentylporphyrindi-ium diacid. While the free base porphyrins are largely planar, a large out-of-plane distortion can be observed in 5,15-diphenylporphyrin diacids, with the expected “projective saddle” shape characteristic for such systems. The combination of these two distortions (B_2u and B_2g) from regular porphyrin structure results in a macrocycle best characterized in the chiral point-group D₂. A rare structural type of a cis-hydrogen bond chelate is observed for 5,15-dipentylporphyrindi-ium diacid, which adopts an achiral C_2v symmetry. Crystallographic data indicate that the protonated porphyrin core forms hydrogen bonding chelates (N-H⋯X⋯H-N) to counter-anions. Weaker interactions, such as induced intramolecular C-H⋯O interactions from the porphyrin periphery are described, with distances characteristic of charge-assisted interactions. This paper offers a conceptual framework for accessing porphyrin macrocycles with designable distortion and symmetry, useful for the selective perturbation of electronic states and a design-for-application approach to solid state porphyrin materials.

Activatable molecular agents for cancer theranostics

Theranostics that integrates diagnosis and treatment modalities has attracted great attention due to its abilities of personalized therapy and real-time monitoring of therapeutic outcome. Such a theranostic paradigm requires agents to simultaneously possess the capabilities of targeting, imaging, and treatment. Activatable molecular agents (AMAs) are promising for cancer theranostics, as they show a higher signal-to-noise ratio (SNR), real-time detection of cancer-associated biomarkers, lower normal tissue toxicity, and a higher therapeutic effect. This perspective summarizes the recent advancements of AMAs, which include imaging-guided chemotherapy, imaging-guided photodynamic therapy, and imaging-guided photothermal therapy. The molecular design principles, theranostic mechanisms, and biomedical applications of AMAs are described, followed by a discussion of potential challenges of AMAs in cancer theranostics.

Synthesis and Functionalization of Porphyrins through Organometallic Methodologies

This review focuses on the postfunctionalization of porphyrins and related compounds through catalytic and stoichiometric organometallic methodologies. The employment of organometallic reactions has become common in porphyrin synthesis. Palladium-catalyzed cross-coupling reactions are now standard techniques for constructing carbon-carbon bonds in porphyrin synthesis. In addition, iridium- or palladium-catalyzed direct C-H functionalization of porphyrins is emerging as an efficient way to install various substituents onto porphyrins. Furthermore, the copper-mediated Huisgen cycloaddition reaction has become a frequent strategy to incorporate porphyrin units into functional molecules. The use of these organometallic techniques, along with the traditional porphyrin synthesis, now allows chemists to construct a wide range of highly elaborated and complex porphyrin architectures.

Studying the intersystem crossing rate and triplet quantum yield of meso-substituted porphyrins by means of pulse train fluorescence technique

Excited state dynamics, particularly intersystem crossing, of a set of meso-substituted porphyrins bearing different electron–donor and acceptor groups was studied by pulse train fluorescence technique. Triplet quantum yield was found to be critically dependent on the nature of meso-substituents in the porphyrin system. Porphyrins with meso methoxyphenyl groups were found to show high triplet quantum yields ([Formula: see text] between 0.70 and 0.81). Moreover, the quantity of methoxyphenyl groups and the substitution pattern directly influence [Formula: see text]. Alternatively, porphyrins attached to nitrophenyl group possess low triplet quantum yield values (~0.3). The observed structure-properties relationships suggest new ways for tuning the optical properties of porphyrins via chemical modification.

Comparison of drug release from liquid crystalline monoolein dispersions and solid lipid nanoparticles using a flow cytometric technique

Colloidal lipid particles such as solid lipid nanoparticles and liquid crystalline nanoparticles have great opportunities as drug carriers especially for lipophilic drugs intended for intravenous administration. In order to evaluate drug release from these nanoparticles and determine their behavior after administration, emulsion droplets were used as a lipophilic compartment to which the transfer of a model drug was measured. The detection of the model drug transferred from monoolein cubic particles and trimyristin solid lipid nanoparticles into emulsion droplets was performed using a flow cytometric technique. A higher rate and amount of porphyrin transfer from the solid lipid nanoparticles compared to the monoolein cubic particles was observed. This difference might be attributed to the formation of a highly ordered particle which leads to the expulsion of drug to the surface of the crystalline particle. Furthermore, the sponge-like structure of the monoolein cubic particles decreases the rate and amount of drug transferred. In conclusion, the flow cytometric technique is a suitable technique to study drug transfer from these carriers to large lipophilic acceptors. Monoolein cubic particles with their unique structure can be used successfully as a drug carrier with slow drug release compared with trimyristin nanoparticles.

Crystal structure of 5-tert-but-yl-10,15,20-tri-phenyl-porphyrin

In the title free base porphyrin, C42H34N4, the neighbouring N⋯N distances in the center of the ring vary from 2.818 (8) to 2.998 (8) Å and the phenyl rings are tilted from the 24-atom mean plane at angles varying between 62.42 (2)-71.63 (2)°. The NH groups are involved in intra-molecular bifurcated N-H⋯(N,N) hydrogen bonds. The Ca-Cm-Ca angles vary slightly for the phenyl rings, between 124.19 (18)-126.17 (18)°. The largest deviation from the mean plane of the 24-atom macrocycle is associated with the meso carbon at the substituted tert-butyl position, which is displaced from the mean plane by 0.44 (2) Å. The free base porphyrin is characterized by a significant degree of ruffled (B 1u ) distortion with contributions from domed (A 2u ) and wave [Eg (y) and Eg (x)] modes. In the crystal, mol-ecules are linked by a number of weak C-H⋯π inter-actions, forming a three-dimensional framework. The structure was refined as a two-component inversion twin.

Green synthesis of dipyrromethanes in aqueous media catalyzed by SO3H-functionalized ionic liquid

A mild, efficient and metal-free method was described for the green synthesis of dipyrromethanes from aldehydes and unsubstituted pyrrole catalyzed by SO₃H-functionalized ionic liquids (SO₃H-ILs) in aqueous media at room temperature.

Comparative study on the suitability of two techniques for measuring the transfer of lipophilic drug models from lipid nanoparticles to lipophilic acceptors

Due to their particle size in the submicrometer range, lipid nanoparticles are suitable for parenteral administration. In order to obtain information on their potential in vivo performance, a simple and effective in vitro assay to evaluate the drug release behavior of such particles is required. This study compares the use of different experimental setups for this purpose. Lipid nanoparticles from trimyristin which were loaded with fluorescent lipophilic drug models (a temoporfin and Nile red) were used as donor particles. The transfer of the two drug models to multilamellar vesicles (MLV) and emulsion droplets as lipophilic acceptor compartments was examined. The determination of the transferred substance was performed either after separation by centrifugation or by an in situ flow cytometric technique. The transfer of temoporfin was slow to the acceptor MLV and very rapid to the acceptor emulsion. With both acceptors, the transfer of temoporfin stopped at a concentration much lower than the theoretical equilibrium values. The transfer of the less lipophilic drug Nile red was very rapid to both acceptors with equilibrium concentrations close to the expected values. The transfer results of temoporfin especially to the acceptor MLV obtained with the two detection techniques were comparable while the centrifugation technique indicated an apparently higher Nile red transfer rate than the flow cytometric technique. Both techniques are equally suitable to study the transfer of temoporfin, while the flow cytometric technique is advantageous to measure the very rapid transfer of Nile red.

Synthesis of a series of Zinc(II)/freebase porphyrin dimers and trimers with programmable sequences from a common key molecule

We have developed a new methodology that enables the synthesis of any sequence of metal porphyrin arrays starting from a common key molecule. Using this method, we prepared porphyrin dimers and trimers with varying component unit sequences via consecutive Suzuki coupling reactions using the same key porphyrin compound under the same reaction conditions. The key porphyrin compound was synthesized on a gram scale in one batch, and the coupling reactions afforded the desired oligomers in good yields. Thus, the prepared porphyrin arrays showed unique physical properties depending on the sequence of the central metals. The reaction is potentially applicable for the automated synthesis of porphyrin arrays.

Bifunctional catalysts based on m-phenylene-bridged porphyrin dimer and trimer platforms: synthesis of cyclic carbonates from carbon dioxide and epoxides

Highly active bifunctional diporphyrin and triporphyrin catalysts were synthesized through Stille coupling reactions. As compared with a porphyrin monomer, both exhibited improved catalytic activities for the reaction of CO2 with epoxides to form cyclic carbonates, because of the multiple catalytic sites which cooperatively activate the epoxide. Catalytic activities were carefully investigated by controlling temperature, reaction time, and catalyst loading, and very high turnover number and turnover frequency were obtained: 220 000 and 46 000 h(-1) , respectively, for the magnesium catalyst, and 310 000 and 40 000 h(-1) , respectively, for the zinc catalyst. Results obtained with a zinc/free-base hybrid diporphyrin catalyst demonstrated that the Br(-) ions on the adjacent porphyrin moiety also function as nucleophiles.

(5-n-Butyl-10,20-diiso-butyl-porphyrin-ato)nickel(II)

The asymmetric unit of the title compound, [Ni(C₃₂H₃₆N₄)], contains two independent mol­ecules exhibiting an overall ruffled conformation of the porphyrin macrocycle and differing mainly in the positions of the methyl groups. The average Ni—N bond lengths are 1.912 (2) and 1.910 (2) Å in the two mol­ecules. The mol­ecules form a closely spaced lattice structure in which neighbouring porphyrins are oriented in a nearly perpendicular fashion to each other. The compound was prepared via nucleophilic substitution of (5,15-diiso­butyl­porphyrinato)nickel(II) with n-butyl­lithium.

5,15-Bis(4-pentyl-oxyphen-yl)porphyrin

In the title compound, C₄₂H₄₂N₄O₂, the complete molecule is generated by a crystallographic inversion centre. The porphyrin system exhibits a near planar macrocycle conformation with an average deviation from the least-squares plane of the 24 macrocycle atoms of 0.037 (5) Å. The phenyl ipso C atoms are positioned above and below the porphyrin plane by 0.35 (1) Å and the macrocycle shows evidence of in-plane rectangular elongation with N⋯N separations of 3.032 (5) and 2.803 (5) Å. Two intramolecular N—H⋯N hydrogen bonds occur.

High content screening as high quality assay for biological evaluation of photosensitizers in vitro

A novel single step assay approach to screen a library of photdynamic therapy (PDT) compounds was developed. Utilizing high content analysis (HCA) technologies several robust cellular parameters were identified, which can be used to determine the phototoxic effects of porphyrin compounds which have been developed as potential anticancer agents directed against esophageal carcinoma. To demonstrate the proof of principle of this approach a small detailed study on five porphyrin based compounds was performed utilizing two relevant esophageal cancer cell lines (OE21 and SKGT-4). The measurable outputs from these early studies were then evaluated by performing a pilot screen using a set of 22 compounds. These data were evaluated and validated by performing comparative studies using a traditional colorimetric assay (MTT). The studies demonstrated that the HCS assay offers significant advantages over and above the currently used methods (directly related to the intracellular presence of the compounds by analysis of their integrated intensity and area within the cells). A high correlation was found between the high content screening (HCS) and MTT data. However, the HCS approach provides additional information that allows a better understanding of the behavior of these compounds when interacting at the cellular level. This is the first step towards an automated high-throughput screening of photosensitizer drug candidates and the beginnings of an integrated and comprehensive quantitative structure action relationship (QSAR) study for photosensitizer libraries.

[5,15-Bis(2-methyl-prop-yl)porphyrinato]nickel(II)

The title compound, [Ni(C(28)H(28)N(4))], crystallizes with two independent mol-ecules in the unit cell, one of which is located on an inversion center. Both macrocycles exhibit a planar conformation with average deviation from the least-squares-plane of the 24 macrocycle atoms of Δ24 = 0.043 Å for the first mol-ecule and 0.026 Å for the mol-ecule located on an inversion center. The average Ni-N bond lengths are 1.955 (2) and 1.956 (2) Å in the two mol-ecules. The mol-ecules form π-π dimers of inter-mediary strength with a mean plane separation of 3.36 (2) Å.

Extending the self-organization algorithm of chlorosomal bacteriochlorophylls to synthetic pigments

Two new zinc porphyrins having two meso-undecyl solubilizing groups and two meso-formyl groups or two meso-cyano groups have been prepared in good yields and were shown by stationary absorption and fluorescence spectroscopies to self-organize in nonpolar solvents such as n-heptane. The diformyl and dicyano recognition groups can thus successfully replace the hydroxy and carbonyl recognition groups encountered in the natural self-organizing bacteriochlorophylls and which were, up to now, the only recognition groups used in synthetic or semisynthetic bacteriochlorophyll mimics.

mTHPC--a drug on its way from second to third generation photosensitizer?

5,10,15,20-Tetrakis(3-hydroxyphenyl)chlorin (mTHPC, Temoporfin) is a widely investigated second generation photosensitizer. Its initial use in solution form (Foscan®) is now complemented by nanoformulations (Fospeg®, Foslip®) and new chemical derivatives related to the basic hydroxyphenylporphyrin framework. Advances in formulation, chemical modifications and targeting strategies open the way for third generation photosensitizers and give an illustrative example for the developmental process of new photoactive drugs.

Temoporfin (Foscan®, 5,10,15,20-tetra(m-hydroxyphenyl)chlorin)--a second-generation photosensitizer

This review traces the development and study of the second-generation photosensitizer 5,10,15,20-tetra(m-hydroxyphenyl)chlorin through to its acceptance and clinical use in modern photodynamic (cancer) therapy. The literature has been covered up to early 2011.