Iron-catalyzed 1,6-addition of aryl Grignard reagents to 2,4-dienoates and -dienamides

Ruthenium(ii)-catalyzed regioselective 1,6-conjugate addition of umpolung aldehydes as carbanion equivalents

Highly regioselective 1,6-conjugate addition was developed using hydrazone as carbanion equivalent catalyzed by ruthenium under mild conditions.

Iron catalyzed stereoselective alkene synthesis: a sustainable pathway

Replacing expensive or toxic transition metals with iron has become an important trend. This article summarises the recent progresses of a wide range of Fe-catalyzed reactions for accessing various stereodefined alkenes.

Iron-Catalyzed Reactions of 2-Pyridone Derivatives: 1,6-Addition and Formal Ring Opening/Cross Coupling

In the presence of simple iron salts, 2‐pyridone derivatives react with Grignard reagents under mild conditions to give the corresponding 1,6‐addition products; if the reaction medium is supplemented with an aprotic dipolar cosolvent after the actual addition step, the intermediates primarily formed succumb to ring opening, giving rise to non‐thermodynamic Z,E‐configured dienoic acid amide derivatives which are difficult to make otherwise. Control experiments as well as the isolation and crystallographic characterization of a (tricarbonyl)iron pyridone complex suggest that the active iron catalyst generated in situ exhibits high affinity to the polarized diene system embedded into the heterocyclic ring system of the substrates, which likely serves as the actual recognition element.

Divergent Protosilylation and Protoborylation of Polar Enynes

Copper-catalyzed divergent conjugate protosilylation and protoborylation of polar enynes were developed. The corresponding β-boryldienoates and β-silyldienotes were obtained in moderate to good yields and with good stereoselectivity. In this protocol, novel cascade double protoborylation/protodeboronation processes of polar enynoates enabled access of the useful trisubstituted vinylboronates in up to 80% yield and with up to 98:2 Z/ E ratio. Moreover, divergent transformations of the products thus obtained were also investigated.

Catalysis-Based Total Syntheses of Pateamine A and DMDA-Pat A

The marine natural product pateamine A (1) and its somewhat simplified designer analogue DMDA-Pat A (2) (DMDA = desmethyl-desamino) are potently cytotoxic compounds; most notably, 2 had previously been found to exhibit a promising differential in vivo activity in xenograft melanoma models, even though the ubiquitous eukaryotic initiation factor 4A (eIF4A) constitutes its primary biological target. In addition, 1 had also been identified as a possible lead in the quest for medication against cachexia, an often lethal muscle wasting syndrome affecting many immunocompromised or cancer patients. The short supply of these macrodiolides, however, rendered a more detailed biological assessment difficult. Therefore, a new synthetic approach to 1 and 2 has been devised, which centers on an unorthodox strategy for the formation of the highly isomerization-prone but essential Z, E-configured dienoate substructure embedded into the macrocyclic core. This motif was encoded in the form of a 2-pyrone ring and unveiled only immediately before macrocyclization by an unconventional iron-catalyzed ring opening/cross-coupling reaction, in which the enol ester entity of the pyrone gains the role of a leaving group. Since the required precursor was readily available by gold catalysis, this strategy rendered the overall sequence short, robust, and scalable. A surprisingly easy protecting group management together with a much improved end game for the formation of the trienyl side chain via a modern Stille coupling protocol also helped to make the chosen route practical. Change of a single building block allowed the synthesis to be redirected from the natural lead compound 1 toward its almost equipotent analogue 2. Isolation and reactivity profiling of pyrone tricarbonyliron complexes provide mechanistic information as well as insights into the likely origins of the observed chemoselectivity.

Stereoselective synthesis of novel antiproliferative steroidal (E, E) dienamides through a cascade aldol/cyclization process

The stereoselective and metal-free protocol involving a cascade aldol/cyclization process for the synthesis of steroidal (E, E) dienamides from steroidal α, α-dicyanoalkene was reported. This protocol efficiently achieved the construction of C=C bond and selective conversion of cyano group into carboxamide in one-pot procedure under mild condition. Further biological evaluation showed that some of these compounds had moderate to excellent cytotoxic activities against all the tested cancer cell lines and were more potent than well-known drug 5-fluorouracil. Particularly, compound 3c represented excellent inhibitory effect against MCF-7 (IC50=0.76 μM), which was about 10-fold more potent than 5-fluorouracil.

Facile synthesis of novel D-ring modified steroidal dienamides via rearrangement of 2H-pyrans

A simple and practical method for synthesis of the D-ring modified steroidal dienamides (4a-k) from the steroidal α,α-dicyanoalkene 3 and aldehydes via vinylogous aldol reaction was first reported. By using NaOAc as a base, the desired products were obtained in moderate to good yields in ethanol under mild conditions. All the synthesized steroidal dienamides are new and are currently being evaluated for their biological activities.

Silylene-mediated polarity reversal of dienoates: additions of dienoates to aldehydes at the δ-position to form trans-dioxasilacyclononenes

Silylene transfer to α,β,γ,δ-unsaturated carbonyl compounds produced oxasilacyclopentenes that underwent thermal additions to aldehydes to produce trans-dioxasilacyclononenes as single stereoisomers. This reaction, which converts the δ-position of the unsaturated carbonyl compound into a nucleophilic center, represents an inversion of polarity from the normal pattern of reactivity. The stereospecificity of the reaction suggests that the addition to aldehydes occurred through a closed, chairlike six-membered transition state. This reaction can be used to prepare enantiomerically pure materials by the use of chiral auxiliaries to control the formation of the oxasilacyclopentenes. Functionalization of the resulting trans-cycloalkene occurred with complete stereoselectively.

The promise and challenge of iron-catalyzed cross coupling

Transition metal catalysts, particularly those derived from the group VIII-X metals, display remarkable efficiency for the formation of carbon-carbon and carbon-heteroatom bonds through the reactions of suitable nucleophiles with organic electrophilic partners. Within this subset of the periodic table, palladium and nickel complexes offer the broadest utility, while additionally providing the deepest mechanistic insight into thus-termed "cross-coupling reactions". The mammoth effort devoted to palladium and nickel catalysts over the past 30 years has somewhat obscured reports of alternative metal complexes in this arena. As cross-coupling reactions have evolved into a critical support for modern synthetic chemistry, the search for alternative catalysts has been taken up with renewed vigor.When the current generation of synthetic chemists reflects back to the origins of cross coupling for inspiration, the well-documented effect of iron salts on the reactivity of Grignard reagents with organic electrophiles surfaces as a fertile ground for alternative catalyst development. Iron possesses the practical benefits more befitting an alkali or alkaline earth metal, while displaying the unique reactivity of a d-block element. Therefore the search for broadly applicable iron catalysts for cross coupling is an increasingly important goal in modern synthetic organic chemistry.This Account describes the evolution of iron-catalyzed cross coupling from its inception in the work of Kochi to the present. Specific emphasis is placed on reactivity and synthetic applications, with selected examples from acyl-, alkenyl-, aryl-, and alkyl halide/pseudohalide cross coupling included. The typical reaction partners are Grignard reagents, though organomanganese, -copper, and -zinc derivatives have also been used in certain cases. Such iron-catalyzed processes occur very rapidly even at low temperature and therefore are distinguished by broad functional group compatibility. Furthermore, recent advances in carbon-heteroatom bond formation and studies relevant to the general reactivity of in situ generated and structurally defined "low-valent" iron catalysts are presented.The preparative aspects of iron-catalyzed cross coupling are encouraging, but the inclination to classify these processes within the characteristic reaction manifold is premature, as mechanistic studies have evolved at a comparatively slow pace. A typical protocol for cross coupling employs an Fe(+2) or Fe(+3) precatalyst, which is reduced in situ by the organometallic nucleophile. The nature of the resulting active component(s) is still best described, more than 30 years later, in Kochi's original terms as a "reduced form of soluble iron". Despite huge gaps in our current knowledge, three distinct mechanisms have been formulated, largely based on empirical evidence: a "canonical" cross-coupling process, a manifold wherein alkylation of an organoiron intermediate replaces transmetalation as a key step, and finally a proposal reliant on the formation of nucleophilic ate complexes. Conjecture and speculation abound, but precisely what constitutes the catalytic cycle in iron-catalyzed cross coupling remains an extremely challenging unanswered question.

Iron-mediated intramolecular metalative cyclization of alpha,beta-unsaturated esters and amides. Versatile one-pot preparation of bicyclic ketoesters

2-Nonen-7-ynedioic or 2-decen-8-ynedioic acid derivatives were treated with an iron reagent generated from FeCl2 and t-BuMgCl in a ratio of 1:4 to give cyclized products after hydrolysis, deuteriolysis, or the addition of carbonyl compounds. Upon reaction with the same iron reagent, 2,7-nonadienedioates afforded bicyclic ketoesters (and their enol forms) after the addition of s-BuOH or carbonyl compounds.

Organocatalytic Asymmetric 1,6-Additions of β-Ketoesters and Glycine Imine

The first organocatalytic enantioselective 1,6-addition of beta-ketoesters and benzophenone imine to electron-poor delta-unsubstituted dienes using cinchona alkaloids under phase-transfer conditions is demonstrated. The scope of the reaction for the beta-ketoesters is outlined for reactions with different delta-unsubstituted dienes having ketones, esters, and sulfones as electron-withdrawing substituents giving the corresponding optically active products in good yields and enantioselectivities in the range of 90-99% ee. The 1,6-addition also proceeds with a number of cyclic beta-ketoesters having different ring sizes, ring systems and substituents in high yields and enantioselectivities. The potential of this new organocatalytic 1,6-addition for beta-ketoesters is demonstrated by a two-step synthesis of the bicyclo[3.2.1]octan-8-one structure, a bicyclic bridged skeleton occurring in a variety of natural compounds. Benzophenone imines also undergo the organocatalytic asymmetric 1,6-addition to the activated dienes in high yields and with enantioselectivities from 92% to 98% ee, except in one case. The synthetic utility of this asymmetric reaction is demonstrated by the two-step transformation of the allylated alpha-amino acid derivative to highly attractive optically active pyrrolidines.