A new synthesis of acetamido phenols promoted by Ce(SO4)2

Magnetite-supported montmorillonite (K10) (nanocat-Fe-Si-K10): an efficient green catalyst for multicomponent synthesis of amidoalkyl naphthol

Montmorillonite (K₁₀) loaded on magnetite silica-coated nanoparticles was made using simple co-precipitation methods. The prepared nanocat-Fe-Si-K₁₀ was analyzed using some techniques including field emission-scanning electron microscopy (FE-SEM), inductive coupling plasma-optical emission spectroscopy (ICP-OES), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), Fourier transmission-infrared spectra (FT-IR), energy dispersive X-ray spectroscopy (EDS), and wavelength-dispersive spectroscopy (WDX). The catalytic activity of the synthesized nanocat-Fe-Si-K₁₀ has been examined in one-pot multicomponent transformations for the synthesis of 1-amidoalkyl 2-naphthol derivatives under solvent-free conditions. Nanocat-Fe-Si-K₁₀ was determined to be very active, having the ability to be reused 15 times without significant loss of catalytic activity. The suggested technique has several advantages, including excellent yield, minimum reaction time, a straightforward workup, and catalyst recycling, all of which are essential green synthetic aspects.

Magnesium sulphate catalyzed green and efficient synthesis of some new derivatives of 1-amido alkyl naphthols under solvent-free condition

Abstract:

The present work describes an efficient, green, and direct approach for the synthesis of amido alkyl naphthols via one-pot multicomponent solvent-free reaction (MCR) of substituted aromatic aldehydes, β-naphthols and urea by the use of easily available, non-toxic and cost-effective Lewis acid catalyst magnesium sulphate (MgSO4.7H2O). The important characteristics of this reaction are eco-friendly and mild reaction conditions, excellent yield of the products, shorter reaction time, economically cheaper and environmentally friendly catalyst MgSO4.7H2O. Also, clean reaction, non-column purification and operational simplicity are some of the additional significant features of this approach.

Chemo-selective control of Ritter-type reaction by coordinatively unsaturated inorganic salt hydrates

We used a readily available water source, MgSO4·2H2O, to realize the control of the chemo-selectivity of the Ritter-type reaction efficiently.

Natural Feedstock in Catalysis: A Sustainable Route Towards Organic Transformations

Catalysts are the jewel in the crown of the chemical industry, accelerating reaction kinetics and augmenting the efficiency of desired reaction paths. Natural feedstock is a renewable resource capable of providing valuable functional products; in addition, it confers an opportunity to create catalysts. As an alternative to stoichiometric reagents, and as a part of a sustainable approach, the implications of using natural feedstocks as a source of new catalysts has attracted considerable interest. Natural feedstock-derived catalysts can promote chemical transformations more efficiently. Recent reports have highlighted the significant role of these biogenic, cost-effective, innocuous, biodegradable materials as catalysts in many biologically and pharmacologically important protocols. This review outlines the decisive organic transformations for which feedstock-derived catalysts have been employed effectively and successfully, along with their economic and environmental benefits over traditional catalytic systems.

Solvent-free synthesis of 1-amidoalkyl-2-naphthol and 3-amino-1-phenyl-1H benzo[f]chromene-2-carbonitrile derivatives by Fe3O4@enamine-B(OSO3H)2 as an efficient and novel heterogeneous magnetic nanostructure catalyst

A green procedure for the one-pot three-component synthesis of 1-amidoalkyl-2-naphthol and 3-amino-1-phenyl-1H benzo[f]chromene-2-carbonitrile derivatives from the reaction of 2-naphtol, aldehydes, and malononitrile/acetamide in the presence of a catalytic amount of Fe3O4@enamine-B(OSO3H)2 as an efficient and novel heterogeneous magnetic nanostructure catalyst is described. The catalyst was characterized using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). These strategies possess some merits such as simple work-up method, easy preparation of the catalyst, short reaction times, good-to-high yields, and non-use of hazardous solvents during all steps of the reactions. Moreover, due to the magnetic nature of the catalyst, it was readily recovered by magnetic decantation and can be recycled at least six runs with no considerable decrease in catalytic activity.

Catalytic Applications of Saccharin and its Derivatives in Organic Synthesis

:

Saccharin (1,2-benzisothiazol-3(2H)-one-1,1-dioxide) is a very mild, cheap, commercially available, water soluble, environmentally benign and edible Brønsted acidic substance. Recently, with other utilities, saccharin and its derivatives were employed as catalysts for various organic transformations. In this review, catalytic applicability of saccharin and its derivatives under various reaction conditions is summarized.

Adipic Acid as a Biodegradable Solid Acid Catalyst for One-Pot, Three Component Synthesis of 1-Amidoalkyl-2-naphthols

Background:

1-Amidoalkyl-2-naphthols are an attractive group of organic compounds that can be converted to oxazine heterocycles and aminoalkyl naphthols. The derivatives of 1- amidoalkyl-2-naphthols have significant biological activities and act as drug candidates.

Methods:

1-Amidoalkyl-2-naphthols were synthesized via the three-component condensation reaction of 2-naphthol, acetamide/benzamide and various aldehydes in the presence of 10 mol% of adipic acid as an organocatalyst under solvent-free conditions at 120°C.

Results:

A simple, efficient, and operative method for the synthesis of 1-amidoalkyl-2-naphtholes in the presence of adipic acid as the biodegradable catalyst is introduced. Easy operation, acceptable reaction times, eco-friendly, availability of starting materials, simple separation of products, and high yields of products are the significant results of this method.

Conclusion:

In this study, 1-amidoalkyl-2-naphthols were synthesized using commercially available reactants in excellent yields and relatively shorter times. In this process, microwave or ultrasonic waves were not used to provide energy for the reaction.

Facile, efficient and one-pot access to diverse new functionalized aminoalkyl and amidoalkyl naphthol scaffolds via green multicomponent reaction using triethylammonium hydrogen sulfate ([Et3NH][HSO4]) as an acidic ionic liquid under solvent-free conditions

An efficient, clean and one-pot multicomponent synthesis of divers kind of new functionalized aminoalkyl naphthol and amidoalkyl naphthol derivatives via tandem condensation reaction of 2-naphthol, aromatic aldehydes and 5-methyl-1,3,4-thiadiazol-2-amine/5-aryl-1,3,4-thiadiazol-2-amines urea/acetamide under solvent-free conditions is reported. Following this protocol, it was possible to synthesize novel 1-(((5-methyl-1,3,4-thiadiazol-2-yl)amino)(aryl)methyl)naphthalen-2-ol, 1-(aryl((5-aryl-1,3,4-thiadiazol-2-yl)amino)methyl)naphthalen-2-ol and amidoalkyl naphthol derivatives. This protocol includes some salient features, such as the use of triethylammonium hydrogen sulfate ([Et₃NH][HSO₄]) ionic liquid as a green, clean and reusable catalyst, no column chromatographic separation, high atom economy, good yields, low cost and finally no need for a complex procedure.

Functionalized carbon dot adorned coconut shell char derived green catalysts for the rapid synthesis of amidoalkyl naphthols

A one pot synthesis of carbon dot incorporated porous coconut shell char derived sulphonated catalyst is reported here for the first time and is effectively used in the multicomponent synthesis of amidoalkyl naphthol. Macroporous nature of the char is revealed from scanning electron microscopic (SEM) analysis, whereas the dispersion of carbon dots (CDs) on the porous coconut shell char is confirmed from the high resolution transmission electron microscopic (HRTEM) analysis. Fluorescence emission spectrum further confirmed the presence of CDs in the catalyst. Fourier-transform infrared (FTIR) spectral analysis of the materials indicated that sulphonation occurred both to the CD and to the porous char. X-ray photo electron spectroscopic (XPS) analysis of the most active catalyst confirmed the presence of both sulphonic acid and carboxylic acid groups in the catalyst. The coconut shell char derived materials prepared by varying the amount of H₂SO₄ are successfully utilized as efficient alternative green catalysts for the multicomponent reaction, where excellent activity in amidoalkyl naphthol synthesis is obtained within short periods under solvent free reaction conditions. A maximum yield of 98% is obtained in the synthesis of N-[Phenyl-(2-hydroxy-naphthalen-1-yl)-methyl]-benzamide, the representative amidoalkyl naphthol, with the best catalyst within 3 min of reaction. The catalyst is highly active for the reactions carried out with varieties of aldehydes and amides with a product yield in the range of 88-98%. The best catalyst system retained more than 90% of its initial activity even upto 6^th repeated run.

Antimony(III) Acetate an Efficient Catalyst for the Synthesis of 1-Amidoalkyl-2-Naphthols

Antimony(III) acetate was used in the one-pot three-component synthesis of multigram quantities of 1-amidoalkyl-2-naphthols from the condensation between aldehydes, 2-naphthol and acetamide under solvent-free conditions at ambient temperature. The present method has several advantages such as high yields, easy purification, mild reaction conditions, easy work-up, survival of different functional groups and very short reaction times.

Preparation and characterization of a novel Wells-Dawson heteropolyacid-based magnetic inorganic-organic nanohybrid catalyst H6P2W18O62/pyridino-Fe3O4 for the efficient synthesis of 1-amidoalkyl-2-naphthols under solvent-free conditions

A novel magnetic inorganic-organic nanohybrid material H6P2W18O62/pyridino-Fe3O4 (HPA/TPI-Fe3O4) was fabricated and performed as an efficient, eco-friendly, and highly recyclable catalyst for the solvent-free, one-pot, and multi-component synthesis of various substituted 1-amidoalkyl-2-naphthols from the reaction of β-naphthol, an aldehyde, and benzamide with good to excellent yields (47-94%) and in a short span of time (25-60 min). The nanohybrid catalyst was prepared by the chemical anchoring of Wells-Dawson heteropolyacid H6P2W18O62 onto the surface of modified Fe3O4 nanoparticles with N-[3-(triethoxysilyl)propyl]isonicotinamide (TPI) linker. The magnetically recoverable catalyst was easily recycled at least eight times without any loss of catalytic activity. XRD, TEM, UV-vis, and FTIR confirmed that the heteropolyacid H6P2W18O62 is well dispersed on the surface of the solid support and its structure is retained after immobilization on the pyridine modified Fe3O4 nanoparticles. This protocol is developed as a safe and convenient alternate method for the synthesis of 1-amidoalkyl-2-naphthols utilizing an eco-friendly, and a highly reusable catalyst.

Ultrasound mediation for one-pot multi-component synthesis of amidoalkyl naphthols using new magnetic nanoparticles modified by ionic liquids

The ionic liquid 1-methyl-3-(3-trimethoxysilylpropyl) imidazolium acetate was immobilized on the Fe3O4 nanoparticles (MNPs-IL-OAc) and used as an efficient new heterogeneous nanocatalyst for the one-pot multi-component synthesis of 1-amidoalkyl-2-naphthols under ultrasound irradiation. The advantages of present combined method are the use of a low scale catalyst, easier work-up procedure, waste-free, green and efficient synthetic entry to excellent yield of products in a high reusability and a short reaction time.