Admicellar catalysis in multicomponent synthesis of polysubstituted pyrrolidinones

β-Cyclodextrin: a green supramolecular catalyst assisted eco-friendly one-pot three-component synthesis of biologically active substituted pyrrolidine-2-one

A green, novel and eco-efficient synthetic route towards the synthesis of highly substituted bio-active pyrrolidine-2-one derivatives was demonstrated using β-cyclodextrin, a water-soluble supramolecular solid as a green and eco-benign catalyst at room temperature under water-ethanol solvent medium. The exploration of the green catalyst β-cyclodextrin for the metal-free one-pot three-component synthesis of a wide range of highly functionalized bio-active heterocyclic pyrrolidine-2-one moieties from easily available aldehydes and amines explains the superiority and uniqueness of this protocol.

Synthesis and evaluation of the antioxidant activity of 3-pyrroline-2-ones: experimental and theoretical insights

The heterocyclic γ-lactam ring 2-pyrrolidinone has four carbon atoms and one nitrogen atom. Among the group of derivatives of 2-pyrrolidinones, 1,5-dihydro-2H-pyrrol-2-ones, also known as 3-pyrroline-2-ones, play a significant structural role in a variety of bioactive natural compounds. In this study, three-component reactions were used to successfully synthesize six polysubstituted 3-hydroxy-3-pyrroline-2-one derivatives. The antioxidant activity of the compounds was tested by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, identifying 4-ethoxycarbonyl-3-hydroxy-5-(4-methylphenyl)-1-phenyl-3-pyrroline-2-one (4b) as the most promising radical scavenger. Quantum chemistry calculations of the thermodynamics and kinetics of the radical scavenging activity also suggest that 4b is an effective HO˙ radical scavenger, with k_overall values of 2.05 × 10⁹ and 1.54 × 10¹⁰ M⁻¹ s⁻¹ in pentyl ethanoate and water, respectively. On the other hand, 4b could not scavenge hydroperoxyl radicals in either media. The ability of 4b to scavenge hydroxyl radicals in polar and non-polar environments is comparable to that of conventional antioxidants such as melatonin, gallic acid, indole-3-carbinol, ramalin, or Trolox. Thus 4b may be classed as a promising HO˙ radical scavenger in the physiological environment.

Derivatives of 3-hydroxy-3-pyrroline-2-one were effectively synthesized via multicomponent reactions and exhibited potential HO˙ radical scavenging activity.

N-tert-Butyl-2-{2-[2-(4-chloro-phen-yl)-4-hy-droxy-1-(5-methyl-isoxazol-3-yl)-5-oxo-2,5-di-hydro-1H-pyrrol-3-yl]-N-(4-meth-oxy-phen-yl)acetamido}-2-(4-meth-oxy-phen-yl)acetamide methanol monosolvate: single-crystal X-ray diffraction study and Hirshfeld surface analysis

The title compound, C36H37ClN4O7·CH3OH, which crystallizes as a methanol solvate, may possess biological activity, which is inherent for a natural peptide or protein. In the crystal, mol-ecules of the title compound form hydrogen-bonded tetra-mers with the solvate mol-ecules acting as bridges as a result of the O-H⋯O and N-H⋯O inter-molecular hydrogen bonds. Hirshfeld surface analysis was used to study the different types of inter-molecular inter-actions whose contributions are: H⋯H = 53.8%, O⋯H/H⋯O = 19.0%, C⋯H/H⋯C = 14.8%, Cl⋯H/H⋯Cl = 5.3%, N⋯H/H⋯N = 3.2%.

A review on multicomponent reactions catalysed by zero-dimensional/one-dimensional titanium dioxide (TiO2) nanomaterials: Promising green methodologies in organic chemistry

Heterogeneous catalysis has currently become an emerging tool for the design and development of sustainable manufacturing processes in order to obtain advanced intermediates, fine chemicals, and bioactive molecules. This field has been considered efficient and eco-friendly, as it investigates the utilization of non-hazardous metals for atom-economical reactions. Nanomaterials have created a significant impact on scientific and engineering advancements due to their tunable properties with superior performance over their massive counterparts. Due to the increased demand for heterogeneous catalysts in industries and academia, different transition metal oxides have been made into substantial nanostructures. Among them, titanium dioxide (TiO₂) nanomaterials have received more attention on account of their chemical stability, low cost, dual acid-base properties, good oxidation rate and refractive index. Different modifications of TiO₂ extend their applications as active catalysts or catalyst supports in diverse catalytic processes, such as photovoltaics, lithium batteries, pigments and others. One-dimensional (1-D) TiO₂ nanostructures such as nanotubes, nanowires and nanorods have achieved greater importance owing to the unique properties of improved porosity, decreased inter-crystalline contacts, large surface-to-volume ratio, superior dispersibility, amplified accessibility of hydroxyl (-OH) groups and presence of good concentrations of Brønsted/Lewis acid sites. Since the discovery, 1-D TiO₂ nanostructures have served good photocatalytic applications, but were less explored in organic transformations. While many articles and reviews have covered the applications of 0-D and 1-D TiO₂ nanostructured materials (NSMs) in photoelectrochemical reactions and solar cells, there are other interesting applications of these as well. In contrast to the conventional multi-step processes that utilise the stepwise formation of individual bonds, one-pot conversions based on multicomponent reactions (MCRs) have acquired much significance in contemporary organic synthesis. This paper presents a critical review on history, classification, design and synthetic utility of titania-based nanostructures, which could be used as robust solid-acid catalysts and catalyst supports for MCRs. Further, to put ideas into perspective, the introduction and applications of MCRs for various organic transformations have been discussed.

One-pot synthesis of 4-ethyl 2,3-dimethyl 1-(5-aryl-1,3,4-thiadiazol-2-yl)-5-oxo-2,5-dihydro-1H-pyrrole-2,3,4-tricarboxylate derivatives via intramolecular Wittig reaction

A facile one-pot synthesis of highly functionalized dialkyl 1-(5-aryl-1,3,4-thiadiazol-2-yl)-4-ethoxy-5-oxo-2,5-dihydro-1 H-pyrrole-2,3-dicarboxylate derivatives via the reaction between acetylenic esters, triphenylphosphine, and ethyl 2-[(5-aryl-1,3,4-thiadiazol-2-yl)amino]-2-oxoacetate is developed. The structure of the products is confirmed by spectroscopic methods.

Fe3O4@L-arginine as a Reusable Catalyst for the Synthesis of Polysubstituted 2-Pyrrolidinones

Background:

This research introduces an effective and green method for the synthesis of polysubstituted 2-pyrrolidinone derivatives as biologically-active heterocyclic compounds using multi- component reactions using Fe3O4@L-arginine as a reusable organocatalyst.

Material and Method:

The Fe3O4@L-arginine nanoparticles were prepared by a facile one-step approach and the structure elucidation of the magnetic nanocatalyst has been done using various spectroscopy techniques.

Results:

L-arginine-functionalized magnetite nanoparticles were obtained with particle sizes around 10 nm. Fe3O4@L-arginine exhibited strong catalytic activity to obtain some polysubstituted 2- pyrrolidinone.

Conclusion:

The considerable advantages of this research are short reaction times, excellent yields, simple workup procedure and reusability of the nanocatalyst which is in good agreement with green chemistry disciplines. The study on the reusability of the Fe3O4@L-arginine nanoparticles showed that the recovered catalyst could be reused six consecutive times.

Understanding the mechanism and stereoselectivity of NHC-catalyzed [3 + 2] cycloaddition of 3-bromoenals and isatin N-Boc ketimines

The mechanism and origin of stereoselectivities in N-heterocyclic carbine (NHC)-catalyzed [3 + 2] cycloaddition of 3-bromoenals and isatin N-Boc ketimines have been studied using density functional theory (DFT) calculations. Various possible reaction pathways were examined and analyzed. Our calculation results reveal that the catalytic cycle can be characterized by six steps: nucleophilic attack of a catalyst on 3-bromoenal (step I); [1,2]-proton transfer (step II); addition to the other reactant isatin N-Boc ketimine (step III); debromination (step IV); intramolecular cycloaddition concerted with hydrogen-elimination (step V) and elimination of the NHC catalyst (step VI). For step II, besides the direct [1,2]-proton transfer, the mediator (base and water)-assisted proton transfer has been investigated, and the DFT results show that the 2H2O cluster-mediated proton transfer is most energy favorable. The carbon-carbon bond formation step (step III) is calculated to be the stereoselectivity-determining step and the S-configuration product is the predominant product, which are in good agreement with the experimental observations. The mechanistic insights gained in this work should be helpful for other NHC-catalyzed reactions.

Multicomponent Reactions Accelerated by Aqueous Micelles

Multicomponent reactions are powerful synthetic tools for the efficient creation of complex organic molecules in an one-pot one-step fashion. Moreover, the amount of solvents and energy needed for separation and purification of intermediates is significantly reduced what is beneficial from the green chemistry issues point of view. This review highlights the development of multicomponent reactions conducted using aqueous micelles systems during the last two decades.

An Efficient Synthesis of Pyrrolidinone Derivatives in the Presence of 1,1′-Butylenebis(3-sulfo-3H-imidazol-1-ium) Chloride

The catalytic efficiency of 1,1′-butylenebis(3-sulfo-3H-imidazol-1-ium) chloride as a sulfonic acid-functionalized ionic liquid was demonstrated for the synthesis of pyrrolidinone derivatives under mild conditions. The electronic effect of substituents on aniline derivatives was investigated. Further, a study on the structure–activity relationship of ionic liquids containing sulfonic groups for the synthesis of ethyl-2-(4-chlorophenyl)-4-hydroxy-5-oxo-1-(p-tolyl)-2,5-dihydro-1H-pyrrole-3-carboxylate was performed under optimal conditions. The results showed that the catalytic properties of ionic liquids containing two sulfonic or imidazole moieties with carbon spacers was superior to ionic liquids having one sulfonic or imidazole moiety with no carbon spacer.

Combinatorial synthesis of spiro[indoline-3,2′-pyrrole] derivatives via a three-component reaction under catalyst-free conditions

Reported here is a convenient catalyst-free method for preparing a series of spiro[indoline-3,2′-pyrroles] from a three-component reaction of isatins, α-amino acid and phenylpropiolic acid esters in refluxing isopropanol with high regioselectivity and yields.

Rapid synthesis of alkylaminophenols via the Petasis borono–Mannich reaction using protonated trititanate nanotubes as robust solid–acid catalysts

The Petasis borono–Mannich reaction was applied to the synthesis of alkylaminophenols from o-hydroxybenzaldehydes, secondary amines and boronic acids in the presence of H₂Ti₃O₇ nanotubes as reusable solid–acid catalysts.

Three-component access to 2-pyrrolin-5-ones and their use in target-oriented and diversity-oriented synthesis

The combination of two multicomponent reactions,i.e.a Hantzsch-type synthesis of 2-pyrrolin-5-ones and a 1,3-dipolar cycloaddition generated complex spirocyclic systems.

In-water facile synthesis of poly-substituted 6-arylamino pyridines and 2-pyrrolidone derivatives using tetragonal nano-ZrO2 as reusable catalyst

Green synthesis of functionalized 6-arylamino pyridines and 2-pyrrolidinone derivatives using tetragonal ZrO₂ nanoparticles as reusable catalyst in aqueous ethanol.

Effect of different substituents on the one-pot formation of 3,4,5-substituted furan-2(5H)-ones: a kinetics and mechanism study

This work focused on the effects of temperature and different para-substituted anilines on the activation parameters and kinetics of the synthesis reaction of 3,4,5-substituted furan-2(5H)-ones which were studied spectrally at different temperatures in formic acid.

Enantioselective Construction of Spiro[indoline-3,2'-pyrrole] Framework via Catalytic Asymmetric 1,3-Dipolar Cycloadditions Using Allenes as Equivalents of Alkynes

The first catalytic asymmetric 1,3-dipolar cycloadditions (1,3-DCs) of isatin-derived azomethine ylide with allenes have been established, which efficiently assembly isatins, amino-esters and 2,3-allenoate into enantioenriched spiro[indoline-3,2'-pyrrole] derivatives with a quaternary stereogenic center in generally high enantioselectivities (80-98% ee). In this allene-involved 1,3-DC, an unexpected spirooxindole framework bearing an intra-annular C═C double bond was generated, which is quite different from previously reported 1,3-DCs of allenes. This approach not only confronted the great challenge in using allenes as dipolarophiles of 1,3-DCs, but also provided a unique strategy of using allenes as equivalents of alkynes to construct spiro[indoline-3,2'-pyrrole] structure. Besides, this reaction also represents the first catalytic asymmetric ketone-involved 1,3-DCs of allenes, which will also greatly enrich the research contents of 1,3-DCs, the chemistry of allenes as well as the synthetic methods of spirooxindoles.

Four-component reaction of cyclic amines, 2-aminobenzothiazole, aromatic aldehydes and acetylenedicarboxylate

The four-component reaction of 2-aminobenzothiazole, aromatic aldehydes, acetylenedicarboxylate and piperidine or pyrrolidine in ethanol afforded the functionalized 2-pyrrolidinones containing both benzothiazolyl and piperidinyl (or pyrrolidinyl) units in good yields. On the other hand, the similar four-component reactions resulted in the functionalized morpholinium or piperidinium 2-pyrrolidinon-3-olates in the presence of p-toluenesulfonic acid.