Sulfated low molecular weight lignins, allosteric inhibitors of coagulation proteinases via the heparin binding site, significantly alter the active site of thrombin and factor xa compared to heparin

Sustainable Biomass Lignin-Based Hydrogels: A Review on Properties, Formulation, and Biomedical Applications

Different techniques have been developed to overcome the recalcitrant nature of lignocellulosic biomass and extract lignin biopolymer. Lignin has gained considerable interest owing to its attractive properties. These properties may be more beneficial when including lignin in the preparation of highly desired value-added products, including hydrogels. Lignin biopolymer, as one of the three major components of lignocellulosic biomaterials, has attracted significant interest in the biomedical field due to its biocompatibility, biodegradability, and antioxidant and antimicrobial activities. Its valorization by developing new hydrogels has increased in recent years. Furthermore, lignin-based hydrogels have shown great potential for various biomedical applications, and their copolymerization with other polymers and biopolymers further expands their possibilities. In this regard, lignin-based hydrogels can be synthesized by a variety of methods, including but not limited to interpenetrating polymer networks and polymerization, crosslinking copolymerization, crosslinking grafted lignin and monomers, atom transfer radical polymerization, and reversible addition-fragmentation transfer polymerization. As an example, the crosslinking mechanism of lignin-chitosan-poly(vinyl alcohol) (PVA) hydrogel involves active groups of lignin such as hydroxyl, carboxyl, and sulfonic groups that can form hydrogen bonds (with groups in the chemical structures of chitosan and/or PVA) and ionic bonds (with groups in the chemical structures of chitosan and/or PVA). The aim of this review paper is to provide a comprehensive overview of lignin-based hydrogels and their applications, focusing on the preparation and properties of lignin-based hydrogels and the biomedical applications of these hydrogels. In addition, we explore their potential in wound healing, drug delivery systems, and 3D bioprinting, showcasing the unique properties of lignin-based hydrogels that enable their successful utilization in these areas. Finally, we discuss future trends in the field and draw conclusions based on the findings presented.

Designing Smaller, Synthetic, Functional Mimetics of Sulfated Glycosaminoglycans as Allosteric Modulators of Coagulation Factors

Natural glycosaminoglycans (GAGs) are arguably the most diverse collection of natural products. Unfortunately, this bounty of structures remains untapped. Decades of research has realized only one GAG-like synthetic, small-molecule drug, fondaparinux. This represents an abysmal output because GAGs present a frontier that few medicinal chemists, and even fewer pharmaceutical companies, dare to undertake. GAGs are heterogeneous, polymeric, polydisperse, highly water soluble, synthetically challenging, too rapidly cleared, and difficult to analyze. Additionally, GAG binding to proteins is not very selective and GAG-binding sites are shallow. This Perspective attempts to transform this negative view into a much more promising one by highlighting recent advances in GAG mimetics. The Perspective focuses on the principles used in the design/discovery of drug-like, synthetic, sulfated small molecules as allosteric modulators of coagulation factors, such as antithrombin, thrombin, and factor XIa. These principles will also aid the design/discovery of sulfated agents against cancer, inflammation, and microbial infection.

An Efficient Method of Birch Ethanol Lignin Sulfation with a Sulfaic Acid-Urea Mixture

For the first time, the process of birch ethanol lignin sulfation with a sulfamic acid-urea mixture in a 1,4-dioxane medium was optimized experimentally and numerically. The high yield of the sulfated ethanol lignin (more than 96%) and containing 7.1 and 7.9 wt % of sulfur was produced at process temperatures of 80 and 90 °C for 3 h. The sample with the highest sulfur content (8.1 wt %) was obtained at a temperature of 100 °C for 2 h. The structure and molecular weight distribution of the sulfated birch ethanol lignin was established by FTIR, 2D 1H and 13C NMR spectroscopy, and gel permeation chromatography. The introduction of sulfate groups into the lignin structure was confirmed by FTIR by the appearance of absorption bands characteristic of the vibrations of sulfate group bonds. According to 2D NMR spectroscopy data, both the alcohol and phenolic hydroxyl groups of the ethanol lignin were subjected to sulfation. The sulfated birch ethanol lignin with a weight average molecular weight of 7.6 kDa and a polydispersity index of 1.81 was obtained under the optimum process conditions. Differences in the structure of the phenylpropane units of birch ethanol lignin (syringyl-type predominates) and abies ethanol lignin (guaiacyl-type predominates) was manifested in the fact that the sulfation of the former proceeds more completely at moderate temperatures than the latter. In contrast to sulfated abies ethanol lignin, the sulfated birch ethanol lignin had a bimodal and wider molecular weight distribution, as well as less thermal stability. The introduction of sulfate groups into ethanol lignin reduced its thermal stability.

Sulfation of Wheat Straw Soda Lignin with Sulfamic Acid over Solid Catalysts

Soda lignin is a by-product of the soda process for producing cellulose from grassy raw materials. Since a method for the industrial processing of lignin of this type is still lacking, several research teams have been working on solving this problem. We first propose a modification of soda lignin with sulfamic acid over solid catalysts. As solid catalysts for lignin sulfation, modified carbon catalysts (with acid sites) and titanium and aluminum oxides have been used. In the elemental analysis, it is shown that the maximum sulfur content (16.5 wt%) was obtained with the Sibunit-4® catalyst oxidized at 400 °C. The incorporation of a sulfate group has been proven by the elemental analysis and Fourier-transform infrared spectroscopy. The molecular weight distribution has been examined by gel permeation chromatography. It has been demonstrated that the solid catalysts used in the sulfation process causes hydrolysis reactions and reduces the molecular weight and polydispersity index. It has been established by the thermal analysis that sulfated lignin is thermally stabile at temperatures of up to 200 °C. According to the atomic force microscopy data, the surface of the investigated film consists of particles with an average size of 50 nm. The characteristics of the initial and sulfated β-O-4 lignin model compounds have been calculated and recorded using the density functional theory.

Sulfation of Wheat Straw Soda Lignin with Sulfamic Acid over Solid Catalysts

Soda lignin is a by-product of the soda process for producing cellulose from grassy raw materials. Since a method for the industrial processing of lignin of this type is still lacking, several research teams have been working on solving this problem. We first propose a modification of soda lignin with sulfamic acid over solid catalysts. As solid catalysts for lignin sulfation, modified carbon catalysts (with acid sites) and titanium and aluminum oxides have been used. In the elemental analysis, it is shown that the maximum sulfur content (16.5 wt%) was obtained with the Sibunit-4^® catalyst oxidized at 400 °C. The incorporation of a sulfate group has been proven by the elemental analysis and Fourier-transform infrared spectroscopy. The molecular weight distribution has been examined by gel permeation chromatography. It has been demonstrated that the solid catalysts used in the sulfation process causes hydrolysis reactions and reduces the molecular weight and polydispersity index. It has been established by the thermal analysis that sulfated lignin is thermally stabile at temperatures of up to 200 °C. According to the atomic force microscopy data, the surface of the investigated film consists of particles with an average size of 50 nm. The characteristics of the initial and sulfated β-O-4 lignin model compounds have been calculated and recorded using the density functional theory.

Biological Activities and Emerging Roles of Lignin and Lignin-Based Products─A Review

Bioactive substances, displaying excellent biocompatibility, chemical stability, and processability, could be extensively applied in biomedicine and tissue engineering. In recent years, plant-based bioactive substances such as flavonoids, vitamins, terpenes, and lignin have received considerable attention due to their human health benefits and pharmaceutical/medical applications. Among them is lignin, an amorphous biomacromolecule mainly derived from the combinatorial radical coupling of three phenylpropane units (p-hydroxypenyl, guaiacyl, and syringyl) during lignification. Lignin possesses intrinsic bioactivities (antioxidative, antibacterial, anti-UV activities, etc.) against phytopathogens. Lignin also enhances the plant resistance (adaptability) against environmental stresses. The abundant structural features of lignin offer other significant bioactivities including antitumor and antivirus bioactivities, regulation of plant growth, and enzymatic hydrolysis of cellulose. This Review reports the latest research results on the bioactive potential of lignin and lignin-based substances in biomedicine, agriculture, and biomass conversion. Moreover, the interfacial reactions and bonding mechanisms of lignin with biotissue/cells and other constituents were also discussed, aiming at promoting the conversion or evolution of lignin from industrial wastes to value-added bioactive materials.

Sulfated Oligomers of Tyrosol: Toward a New Class of Bioinspired Nonsaccharidic Anticoagulants

Sulfated phenolic polymers have extensively been investigated as anticoagulant agents in view of their higher bioavailability and resistance to degradation compared to heparins, allowing for increased half-lives. In this frame, we report herein the preparation of sulfated derivatives of tyrosol, one of the most representative phenolic constituents of extra virgin olive oil, by different approaches. Mild sulfation of OligoTyr, a mixture of tyrosol oligomers, that has been reported to possess antioxidant properties and osteogenic activity, afforded OligoTyrS I in good yields. Elemental analysis, NMR, and MALDI-MS investigation provided evidence for an almost complete sulfation at the OH on the phenylethyl chain, leaving the phenolic OH free. Peroxidase/H₂O₂ oxidation of tyrosol sulfated at the alcoholic group (TyrS) also provided sulfated tyrosol oligomers (OligoTyrS II) that showed on structural analysis highly varied structural features arising likely from the addition of oxygen, derived from water or hydrogen peroxide, to the intermediate quinone methides and substantial involvement of the phenolic OH group in the oligomerization. In line with these characteristics, OligoTyrS I proved to be more active than OligoTyrS II as antioxidant in the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing/antioxidant power (FRAP) assays and as anticoagulant in the classical clotting times, mainly in prolonging the activated partial thromboplastin time (APTT). After intraperitoneal administration in mice, OligoTyrS I was also able to significantly decrease the weight of an induced thrombus. Data from chromogenic coagulation assays showed that the anticoagulant effect of OligoTyrS I was not dependent on antithrombin or factor Xa and thrombin direct inhibition. These results clearly highlight how some structural facets of even closely related phenol polymers may be critical in dictating the anticoagulant activity, providing the key for the rationale design of active synthetic nonsaccharidic anticoagulant agents alternative to heparin.

Study of the Blood Compatibility of Sulfated Organosolv Lignins Derived from Abies sibirica and Larix sibirica Wood Pulp

The effects of sulfated organosolv lignins derived from fir (Abies sibirica) and larch (Larix sibirica) (SLf and SLl; 4-3-7.5% sulfur, median-weight molecular mass 2960-4888 Da), on human blood/plasma clotting, platelet aggregation, and erythrocyte hemolysis were studied in vitro. Antithrombin activities of the samples were below 2 U/mg. Specimens of SLf (sulfur content 6.5, 6.6, and 7.5%, molecular weights 3503, 3487, and 3580 Da, respectively) and SLl (4.3 and 6.3%, 2960 and 3497 Da) in a concentration of 0.01 mg/ml did not prolong the blood clotting time, did not provoke human platelet aggregation, did not destroy erythrocyte membranes, and could be used for construction of drug delivery systems. The SLf sample (6.5%, sulfur, 3503 Da) in concentrations from 0.09 to 1.82 mg/ml did not stimulate platelet aggregation, reduced ADP-induced platelet aggregation, and 2-fold prolonged the blood/plasma clotting time 2-fold in comparison with control and could be used for creation of biomaterial with clot-resistant surface.

An online dual-enzyme co-immobilized microreactor based on capillary electrophoresis for enzyme kinetics assays and screening of dual-target inhibitors against thrombin and factor Xa

In this study, an online capillary electrophoresis (CE) based dual-enzyme (thrombin and factor Xa) co-immobilized microreactor (THR-FXa IMER) was constructed for studying enzyme kinetics and screening dual-target inhibitors against THR and FXa with the aid of the polydopamine/graphene oxide (PDA/GO) coating. Based on the developed THR-FXa IMER, the Michaelis-Menten constants (K_m) of THR and FXa were calculated to be 187.26 and 48.80 μM, respectively. The inhibition constants (K_i) for two known inhibitors, argatroban and rivaroxaban, on THR and FXa were determined to be 14.73 and 0.41 nM, respectively. In addition, after 30 consecutive runs, the enzymes' activity was remained 98% of the initial immobilized activity for both THR and FXa, which shows that the constructed IMER has good stability and repeatability. Finally, the developed method was successfully applied to screen dual-target inhibitors against THR and FXa from 30 small molecular compounds. Among them, 10 compounds such as salvianolic acid C and epigallocatechin gallate (EGCG) have dual-enzyme inhibitory activity, and 2 compounds named saikosaponin A and oleuropein have single THR inhibitory activity, 5 compounds such as rosemary acid and salvianolic acid B have single FXa inhibitory activity. Finally, the molecular interactions between enzyme and potential inhibitors were further verified via the molecular docking, and a new compound with a theoretically good coagulation inhibition effect was designed by the scaffold hopping study. In summary, the developed THR-FXa IMER is a reliable method for screening THR and/or FXa inhibitors.

Lignin-Derived Biomaterials for Drug Release and Tissue Engineering

Renewable resources are gaining increasing interest as a source for environmentally benign biomaterials, such as drug encapsulation/release compounds, and scaffolds for tissue engineering in regenerative medicine. Being the second largest naturally abundant polymer, the interest in lignin valorization for biomedical utilization is rapidly growing. Depending on its resource and isolation procedure, lignin shows specific antioxidant and antimicrobial activity. Today, efforts in research and industry are directed toward lignin utilization as a renewable macromolecular building block for the preparation of polymeric drug encapsulation and scaffold materials. Within the last five years, remarkable progress has been made in isolation, functionalization and modification of lignin and lignin-derived compounds. However, the literature so far mainly focuses lignin-derived fuels, lubricants and resins. The purpose of this review is to summarize the current state of the art and to highlight the most important results in the field of lignin-based materials for potential use in biomedicine (reported in 2014⁻2018). Special focus is placed on lignin-derived nanomaterials for drug encapsulation and release as well as lignin hybrid materials used as scaffolds for guided bone regeneration in stem cell-based therapies.

Dual-target inhibitor screening against thrombin and factor Xa simultaneously by mass spectrometry

An accurate, rapid, and cost-effective methodology for enzyme assay is highly demanded to screen the effect of compounds on target at the molecular level. Thrombin (EC 3.4.21.5) and factor Xa (FXa, EC 3.4.21.6) have been identified as the critical targets for the development of potential drugs with anticoagulant activity. In this study, a rapid, sensitive and accurate assay based on UHPLC-MS/MS method has been developed for inhibitor screening against thrombin and factor Xa simultaneously. For thrombin and factor Xa, the Michaelis-Menten constants (K_m) were calculated to be 6.14 and 57.27 μM, respectively. The inhibition constants (K_i) for two known inhibitors, argatroban and rivaroxaban, were determined to be 16.23 and 0.41 nM, respectively. The assay was further validated through the determination of a high Z' factor value of 0.89. Finally, the developed assay was applied to screen a chemical library against two enzymes. Three hit compounds belonging to a class of sulfated polysaccharides were identified and their targets of inhibition action were further evaluated. The results indicated that the dual-target assay by UHPLC-MS/MS analysis could be used as a reliable method for screening anticoagulant agents.

Lignins and Their Derivatives with Beneficial Effects on Human Health

A review of the pharmacological applications of lignins provides evidence of their protective role against the development of different diseases. In many cases, the effects of lignins could be explained by their antioxidant capacity. Here, we present a systematic review of the literature from the period 2010–2016 which provides information concerning new applications of lignins derived from recent research. The most promising findings are reported, including the methodologies employed and results obtained with lignins or their derivatives which may improve human health. We highlight potential applications in the treatment of obesity, diabetes, thrombosis, viral infections and cancer. Moreover, we report both that lignins can be used in the preparation of nanoparticles to deliver different drugs and also their use in photoprotection.

Kinetic dissection of the pre-existing conformational equilibrium in the trypsin fold

Structural biology has recently documented the conformational plasticity of the trypsin fold for both the protease and zymogen in terms of a pre-existing equilibrium between closed (E*) and open (E) forms of the active site region. How such plasticity is manifested in solution and affects ligand recognition by the protease and zymogen is poorly understood in quantitative terms. Here we dissect the E*-E equilibrium with stopped-flow kinetics in the presence of excess ligand or macromolecule. Using the clotting protease thrombin and its zymogen precursor prethrombin-2 as relevant models we resolve the relative distribution of the E* and E forms and the underlying kinetic rates for their interconversion. In the case of thrombin, the E* and E forms are distributed in a 1:4 ratio and interconvert on a time scale of 45 ms. In the case of prethrombin-2, the equilibrium is shifted strongly (10:1 ratio) in favor of the closed E* form and unfolds over a faster time scale of 4.5 ms. The distribution of E* and E forms observed for thrombin and prethrombin-2 indicates that zymogen activation is linked to a significant shift in the pre-existing equilibrium between closed and open conformations that facilitates ligand binding to the active site. These findings broaden our mechanistic understanding of how conformational transitions control ligand recognition by thrombin and its zymogen precursor prethrombin-2 and have direct relevance to other members of the trypsin fold.