Comparative study of red blood cell method in rat and calves blood as alternatives of Draize eye irritation test

Wettability and contact angle affect precorneal retention and pharmacodynamic behavior of microspheres

In the present study, we describe the development of betaxolol hydrochloride and montmorillonite with ion exchange in a single formulation to create a novel micro-interactive dual-functioning sustained-release delivery system (MIDFDS) for the treatment of glaucoma. Betaxolol hydrochloride molecule was loaded onto the montmorillonite by ion exchange and MIDFDS formation was confirmed by XPS data. MIDFDS showed similar physicochemical properties to those of Betoptic, such as particle size, pH, osmotic pressure, and rheological properties. Nevertheless, the microdialysis and intraocular pressure test revealed better in vivo performance of MIDFDS, such as pharmacokinetics and pharmacodynamics. With regards to wettability, MIDFDS had a larger contact angle (54.66 ± 5.35°) than Betoptic (36.68 ± 1.77°), enabling the MIDFDS (2.93 s) to spread slower on the cornea than Betoptic (2.50 s). Moderate spreading behavior and oppositely charged electrostatic micro-interactions had a comprehensive influence on micro-interactions with the tear film residue, resulting in a longer precorneal retention time. Furthermore, MIDFDS had a significant sustained-release effect, with complete release near the cornea. The dual-functioning sustained-release carrier together with prolonged pre-corneal retention time (80 min) provided sufficiently high drug concentrations in the aqueous humor to achieve a more stable and long-term IOP reduction for 10 h. In addition, cytotoxicity and hemolysis tests showed that MIDFDS had better biocompatibility than Betoptic. The dual-functioning microspheres presented in this study provide the possibility for improved compliance due to low cytotoxicity and hemolysis, which suggests promising clinical implications.

Topical ocular delivery of vancomycin loaded cationic lipid nanocarriers as a promising and non-invasive alternative approach to intravitreal injection for enhanced bacterial endophthalmitis management

Vancomycin (VCM) is a drug of choice for treating infections caused by Staphylococcus species, reported being the most causative agent of bacterial endophthalmitis. However, the ocular bioavailability of topically applied VCM is low due to its high molecular weight and hydrophilicity. The current study sought to explore whether the nanostructured lipid carriers (NLCs) fabricated via cold homogenization technique could improve ocular penetration and prolong the ophthalmic residence of VCM. A 2³ full factorial design was adopted to evaluate the influence of different process and formulation variables on VCM-loaded NLC formulae. The optimized formula with the particle size of 96.4 ± 0.71 nm and narrow size distribution showed spherical morphology obtained by AFM and represented sustained drug release up to 67% in 48 h fitted to the Korsmeyer-Peppas model with probably non-Fickian diffusion kinetic. FTIR studies visualized the drug-carrier interactions in great detail. High encapsulation of VCM (74.8 ± 4.3% w/w) in NLC has been established in DSC and PXRD analysis. The optimal positively charged (+ 29.7 ± 0.47 mV) colloidal dispersion was also stable for 12 weeks at both 4 °C and 25 °C. According to in vivo studies, incorporation of VCM in NLC resulted in a nearly 3-fold increase in the intravitreal concentration of VCM after eye-drop instillation over control groups. Besides, microbiological evaluation admitted its therapeutic effect within five days is comparable to intravitreal injection of VCM. Further, the optimized formula was found to be nonirritant and safe for ophthalmic administration in RBC hemolytic assay. Also, fluorescent tracking of NLCs on rabbit's cornea showed an increase in corneal penetration of nanoparticles. Thus, it is possible to infer that the evolved NLCs are promising drug delivery systems with superior attainments for enhanced Vancomycin ophthalmic delivery to the eye's posterior segment and improved bacterial endophthalmitis management.

Efficacy Study of Broken Rice Maltodextrin in In Vitro Wound Healing Assay

Maltodextrins that contain both simple sugars and polymers of saccharides have been widely used as ingredients in food products and pharmaceutical delivery systems. To date, no much work has been reported on the applications of maltodextrin from broken rice (RB) sources. Therefore, the objective of this work was to investigate the in vitro wound healing efficacy of RB maltodextrin at different conditions. Wounds treated with lower dextrose equivalent (DE) range (DE 10–14) of maltodextrins at a concentration of 10% obtained from RB were found to be able to heal the wounds significantly faster (p < 0.01) than maltodextrin with higher DE ranges (DE 15–19 and DE 20–24) and concentrations of 5% and 20%. The findings from both BrdU and MTT assay further confirmed its wound healing properties as the NIH 3T3 fibroblast wounded cells were able to proliferate without causing cytotoxic effect when wounded cell was treated with maltodextrin. All these findings indicated that the RB maltodextrin could perform better than the commercial maltodextrin at the same DE range. This study showed that RB maltodextrins had better functionality properties than other maltodextrin sources and played a beneficial role in wound healing application.

Study of active ingredients in black soybean sprouts and their safety in cosmetic use

Active ingredients in different lengths of black soybean sprouts were extracted with water. Concentrations of the main proteins and polysaccharides were determined by the Forint phenol assay and phenol-sulfuric acid assay, respectively. Anti-oxidizing capacities of the extracts were measured in vitro using the DPPH scavenging test and whitening capacity was measured in vitro using the tyrosinase inhibition test. The effects of the bean sprout extracts on human skin fibroblasts damnified by H₂O₂ were studied using an MTT colorimetric assay. The safety of the extracts was determined using the red blood cell (RBC) test, chick chorioallantoic membrane (CAM) assay and human patch test. Results show that DPPH radical scavenging rates at different shoot lengths were all greater than 95%, while the tyrosinase inhibition capacity of the extracts reached 98%. Hemolysis rate in all extracts were lower than 10%, below the 20% regulatory limit for the RBC test. No signs of allergic reactions were observed in the human patch tests. The optimum extract was obtained from bean sprouts grown to 0.5 cm. Extracts of black bean sprouts are safe and can be used as additives in anti-aging and whitening cosmetic products.

Development of polyvinyl alcohol-gelatin membranes for antibiotic delivery in the eye

AIM

The aim of the present study was to develop biosynthetic hybrid polymer-based ocular insert for topical administration of antibiotics for treatment of ocular infections.

METHODS

Ciprofloxacin hydrochloride-loaded three different inserts were prepared by solution casting method by esterification of a biopolymer (gelatin) with a synthetic polymer (polyvinyl alcohol, PVA). Esterification between PVA and gelatin was confirmed by Fourier transform infrared spectroscopy.

RESULTS

Inserts were found to be wettable and swellable with simulated tear fluid and had a contact angle <50° with simulated tear fluid. Mechanical properties of PVA-gelatin (10:3 wt%) inserts included a maximal tensile strength of 8.6 ± 2 MPa and the inserts showed adequate mucoadhesion with reconstituted mucin. In vitro drug release of ciprofloxacin hydrochloride for up to 24 hours was observed from the inserts. Inserts were found to be biocompatible using SIRC rabbit corneal epithelial cell line by sulforhodamine B assay and by Draize test in albino rabbits. Further inserts showed higher ocular penetration of sodium fluorescein in goat eye as compared to eyedrop solution.

CONCLUSIONS

In brief, the study suggests that PVA-gelatin polymeric blends are promising as ocular inserts for prolonged release of antibiotic in the eye as compared to eyedrops. Such inserts may also be therapeutically beneficial for treatment of corneal ulcers and external ocular infections.

Development of the short time exposure (STE) test: an in vitro eye irritation test using SIRC cells

Using SIRC (rabbit corneal cell line) cells, we developed an alternative eye irritation test: the short time exposure (STE) test. This STE test is a cytotoxicity test using physiological saline or mineral oil as the test solvent. Evaluation exposure time is short (5 min), which is similar to actual exposure situations, and uses the cell viability (CV) at a constant concentration as the endpoint for irritation potential. First, in order to confirm the usefulness of this STE test in assessing eye irritation potential of chemicals, 51 raw materials were tested and the correlation between CV in the STE test and the eye irritation score in the Draize test was examined. For the undiluted raw materials tested in the Draize test, the 5% test concentration in the STE test gave irritation classes that correlated well with the irritation classes from the Draize test (accuracy: 89.6%). For those materials tested as a 10% solution in the Draize test, STE irritation classes with 0.05% test concentration corresponded well with the Draize irritation classes (accuracy: 80.0%). Next, using the cell viabilities at these two concentrations, the STE prediction model (PM) was developed. A score of 1 or 2 was given for the results from each tested concentration in the STE test and Draize test. The scores from each test were then summed to yield a 3-level (Rank 1: minimally irritant, Rank 2: moderate irritant, Rank 3: severe irritant) eye irritation potential classification. Rank classification in the STE test showed a good correlation mostly to that in the Draize test (irritation class correspondence rate: 70.2%, but after exclusion of data of alcoholic materials, the rate was 91.7%). In most cytotoxicity test, the cytotoxicity of acids and amines is generally underestimated due the use of medium as the solvent. This is the result of the buffering capacity of the media. On the other hand, the STE test could predict the eye irritation potential by evaluating the chemical with a 5% test concentration. Eleven water insoluble materials such as toluene, octanol, and hexanol could be evaluated by using mineral oil as test solvent in the STE test. The STE test demonstrated itself to be simple, promising, have great potential, be of value, and to be an easily standardized alternative eye irritation test.

Ocular toxicology: the Draize eye test

PURPOSE OF REVIEW

Superficial ocular tissues are frequently exposed to damage produced by chemical compounds applied on or around the ocular surface for cosmetic, therapeutic or accidental reasons. An experimental test measuring objectively and in a reproducible way any potential damaging effect would certainly help in prospectively minimizing unwanted effects. The Draize eye test, although commonly employed to date, does not seem to be quite satisfactory in this respect.

RECENT FINDINGS

The limits of the Draize eye test and the results of some modified versions of the test are analysed. In particular, the good predictivity of the so-called low-volume Draize eye test and the recent findings of studies on the in-vitro and ex-vivo alternatives to the Draize eye test are presented.

SUMMARY

The Draize eye test, despite criticisms, has been used in the clinical setting for a long time and still remains the reference protocol. To date, only a combination of alternative methods, none of which is devoid of serious criticisms, seems to be able to exhaustively recognize potential irritants and avoiding for that purpose, in some cases, the use of living animals.