Advances in immunochemical technologies for analysis of organic pollutants in the environment

A retrospective screening method for carbamate toxicant exposure based on butyrylcholinesterase adducts in human plasma with ultra-high performance liquid chromatography-tandem mass spectrometry

Carbamate pesticides are extensively used in agriculture for their inhibition to acetylcholinesterase and damages to the insects' neural systems. Because of their toxicity, human poisoning incidents caused by carbamate pesticide exposure have occurred from time to time. What's more, some lethally toxic carbamate toxicants known as carbamate nerve agents (CMNAs) have been supplemented in Schedule 1 of the Annex on Chemicals in the Chemical Weapons Convention (CWC) by Organisation of the Prohibition of Chemical Weapons (OPCW) from 2020. And some other carbamates, like physostigmine, have been used in clinical treatment as anticholinergic drugs and their misuse may also cause damages to the body. Similar to organophosphorus toxicants, carbamate toxicants would react with butyrylcholinesterase (BChE) in plasma when entering the human body, resulting in the BChE adducts, based on which the exposure of carbamate toxicants could be detected retrospectively. In this study, methylcarbamyl nonapeptide and dimethylcarbamyl nonapeptide from pepsin digestion of BChE adducts were identified with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) in product ion scan mode. Carbofuran was chosen as the target to establish the detection method of carbamate toxicant exposure based on methylcarbamyl nonapeptide digested from methylcarbamyl BChE. Procainamide-gel affinity purification, pepsin digestion and UHPLC-MS/MS analysis in multiple reaction monitoring (MRM) mode were applied. Under the optimized conditions of sample preparation and UHPLC-MS/MS MRM analysis, the limits of detection (LODs) reached 10.0 ng/mL of plasma exposed to carbofuran with satisfactory specificity. The quantitation approach was established with d₃-carbofuran-exposed plasma as the internal standard (IS) and the linearity range was 30.0-1.00 × 10³ nmol/L (R² >0.998) with the accuracy of 95.6%-107% and precision of ≤9% relative standard deviation (RSD). The applicability was also evaluated by N,N-dimethyl-carbamates with the LODs of 30.0 nmol/L for pirimicarb-exposed plasma based on dimethylcarbamyl nonapeptide. Because most of carbamate toxicants has methylcarbamyl or dimethylcarbamyl groups, this approach could be applied on the retrospective screening of carbamate toxicant exposure including CMNAs, carbamate pesticides or carbamate drugs. This study could provide an effective means in the fields of CWC verification, toxicological mechanism investigation and down-selection of potential treatment options.

Sensitive Detection of SARS-CoV-2 Using a Novel Plasmonic Fiber Optic Biosensor Design

The coronavirus (COVID-19) pandemic has put the entire world at risk and caused an economic downturn in most countries. This work provided theoretical insight into a novel fiber optic-based plasmonic biosensor that can be used for sensitive detection of SARS-CoV-2. The aim was always to achieve reliable, sensitive, and reproducible detection. The proposed configuration is based on Ag-Au alloy nanoparticle films covered with a layer of graphene which promotes the molecular adsorption and a thiol-tethered DNA layer as a ligand. Here, the combination of two recent approaches in a single configuration is very promising and can only lead to considerable improvement. We have theoretically analyzed the sensor performance in terms of sensitivity and resolution. To highlight the importance of the new configuration, a comparison was made with two other sensors. One is based on gold nanoparticles incorporated into a host medium; the other is composed of a bimetallic Ag-Au layer in the massive state. The numerical results obtained have been validated and show that the proposed configuration offers better sensitivity (7100 nm\RIU) and good resolution (figure of merit; FOM = 38.88RIU - 1 and signal-to-noise ratio; SNR = 0.388). In addition, a parametric study was performed such as the graphene layers' number and the size of the nanoparticles.

[Determination of thiabendazole in the conditions of chemical and toxicological analysis of biomaterial]

OBJECTIVE

Is to study the features and to develop the methods for the determination of thiabendazole in the tissues of cadaveric organs and blood. When performing the experiments the methods of TLC, GC-MS and spectrophotometry were used. The advantages were substantiated and the optimal conditions for the release of thiabendazole from the tissues of organs and blood with acetone were determined. A variant of purification of the substance extracted from biomatrixes by the method of column chromatography of normal pressure (sorbent L 40/100 μm, mobile phase acetone-dichloromethane (9.5: 0.5)) is proposed. To identify the analyte by TLC the Sorbfil plates were used and a toluene-acetonitrile mobile phase (2:8). When identifying thiabendazole by a combination of gas-liquid chromatography and mass spectrometry (fragmentation of molecules by electron impact 70 eV) an HP-5MS column 30 m × 0.25 mm with a non-polar stationary phase (5% -phenyl) -methylpolysiloxane was proposed. The expediency of the spectrophotometric determination of thiabendazole on the basis of absorption in an acetonitrile medium has been shown. Methods for the determination of thiabendazole in tissues of organs and blood have been developed and validated. It is shown that the techniques meet the requirements of linearity, selectivity, correctness, precision and stability. The limits of detection of thiabendazole in the liver and blood are 0.14 and 0.10 mg, respectively; the limits of quantitative determination are 0.26 and 0.18 mg per 100 g of biomatrix.

Sensitivity Improvement of a Surface Plasmon Resonance Sensor Based on Two-Dimensional Materials Hybrid Structure in Visible Region: A Theoretical Study

In this paper, we propose a surface plasmon resonance (SPR) sensor based on two-dimensional (2D) materials (graphene, MoS₂, WS₂ and WSe₂) hybrid structure, and theoretically investigate its sensitivity improvement in the visible region. The thickness of metal (Au, Ag or Cu) and the layer number of each 2D material are optimized using genetic algorithms to obtain the highest sensitivity for a specific wavelength of incident light. Then, the sensitivities of proposed SPR sensors with different metal films at various wavelengths are compared. An Ag-based SPR sensor exhibits a higher sensitivity than an Au- or Cu-based one at most wavelengths in the visible region. In addition, the sensitivity of the proposed SPR sensor varies obviously with the wavelength of incident light, and shows a maximum value of 159, 194 or 155°/RIU for Au, Ag or Cu, respectively. It is demonstrated that the sensitivity of the SPR sensor based on 2D materials’ hybrid structure can be further improved by optimizing the wavelength of incident light.

Immunoaffinity Chromatography: Concepts and Applications

Antibody-based separation methods, such as immunoaffinity chromatography (IAC), are powerful purification and isolation techniques. Antibodies isolated using these techniques have proven highly efficient in applications ranging from clinical diagnostics to environmental monitoring. Immunoaffinity chromatography is an efficient antibody separation method which exploits the binding efficiency of a ligand to an antibody. Essential to the successful design of any IAC platform is the optimization of critical experimental parameters such as (a) the biological affinity pair, (b) the matrix support, (c) the immobilization coupling chemistry, and (d) the effective elution conditions. These elements and the practicalities of their use are discussed in detail in this review. At the core of all IAC platforms is the high affinity interactions between antibodies and their related ligands; hence, this review entails a brief introduction to the generation of antibodies for use in immunoaffinity chromatography and also provides specific examples of their potential applications.

Ternary covalent conjugate (antibody–gold nanoparticle–peroxidase) for signal enhancement in enzyme immunoassay

A synthesis of a new horseradish peroxidase (HRP) conjugate and antibody covalently bound with gold nanoparticles (GNPs) with a high enzyme content was first developed.

Label-free disposable immunosensor for detection of atrazine

This work reports the construction of a fast, disposable, and label-free immunosensor for the determination of atrazine. The immunosensor is based on a field effect transistor (FET) where a network of single-walled carbon nanotubes (SWCNTs) acts as the conductor channel, constituting carbon nanotubes field effect transistors (CNTFETs). Anti-atrazine antibodies were adsorbed onto the SWCNTs and subsequently the SWCNTs were protected with Tween 20 to prevent the non-specific binding of bacteria or proteins. The principle of the immunoreaction consists in the direct adsorption of atrazine specific antibodies (anti-atrazine) to SWCNTs networks. After exposed to increasing concentrations of atrazine, the CNTFETs could be used as useful label-free platforms to detect atrazine. Under the optimal conditions, a limit of detection as low as 0.001 ng mL(-1) was obtained, which is lower than that of other methods for the atrazine detection, and in a working range between 0.001 and 10 ng mL(-1). The average recoveries obtained for real water samples spiked with atrazine varied from 87.3% to 108.0%. The results show that the constructed sensors display a high sensitivity and could be useful tools for detecting pesticides like atrazine at low concentrations. They could be also applied to the determination of atrazine in environmental aqueous samples, such as seawater and riverine water.

Competitive and noncompetitive phage immunoassays for the determination of benzothiostrobin

Twenty-three phage-displayed peptides that specifically bind to an anti-benzothiostrobin monoclonal antibody (mAb) in the absence or presence of benzothiostrobin were isolated from a cyclic 8-residue peptide phage library. Competitive and noncompetitive phage enzyme linked immunosorbent assays (ELISAs) for benzothiostrobin were developed by using a clone C3-3 specific to the benzothiostrobin-free mAb and a clone N6-18 specific to the benzothiostrobin immunocomplex, respectively. Under the optimal conditions, the half maximal inhibition concentration (IC50) of the competitive phage ELISA and the concentration of analyte producing 50% saturation of the signal (SC50) of the noncompetitive phage ELISA for benzothiostrobin were 0.94 and 2.27 ng mL(-1), respectively. The noncompetitive phage ELISA showed higher selectivity compared to the competitive. Recoveries of the competitive and the noncompetitive phage ELISAs for benzothiostrobin in cucumber, tomato, pear and rice samples were 67.6-119.6% and 70.4-125.0%, respectively. The amounts of benzothiostrobin in the containing incurred residues samples detected by the two types of phage ELISAs were significantly correlated with that detected by high-performance liquid chromatography (HPLC).

Chemical sensors and biosensors for the detection of melamine

Melamine is an emerging contaminant in milk, infant formula and pet food.

Amino acid sequence of anionic peroxidase from the windmill palm tree Trachycarpus fortunei

Palm peroxidases are extremely stable and have uncommon substrate specificity. This study was designed to fill in the knowledge gap about the structures of a peroxidase from the windmill palm tree Trachycarpus fortunei. The complete amino acid sequence and partial glycosylation were determined by MALDI-top-down sequencing of native windmill palm tree peroxidase (WPTP), MALDI-TOF/TOF MS/MS of WPTP tryptic peptides, and cDNA sequencing. The propeptide of WPTP contained N- and C-terminal signal sequences which contained 21 and 17 amino acid residues, respectively. Mature WPTP was 306 amino acids in length, and its carbohydrate content ranged from 21% to 29%. Comparison to closely related royal palm tree peroxidase revealed structural features that may explain differences in their substrate specificity. The results can be used to guide engineering of WPTP and its novel applications.

Application of dispersive liquid-liquid microextraction for estrogens' quantification by enzyme-linked immunosorbent assay

Estrogens, such as 17β-estradiol (E2) and 17α-ethinylestradiol (EE2), are the major responsible for endocrine-disrupting effects observed in aquatic environments due to their high estrogenic potency, even at concentrations ranging from pgL(-1) to ng L(-1). Thus, it is essential to develop analytical methodologies suitable for monitoring their presence in water samples. Dispersive liquid-liquid microextraction (DLLME) was used as a pre-concentration step prior to the quantification of E2 and EE2 by enzyme-linked immunosorbent assay (ELISA). First, an evaluation of the effect of DDLME on the E2 and EE2 ELISA calibration curves was performed. Since the extraction procedure itself had an influence on the ELISA optical density (OD), it became necessary to subject, not only the samples, but also all the standards to the DLLME process. Working ranges were determined, being between 1.2 and 8000 ng L(-1), for E2, and between 0.22 and 1500 ng L(-1), for EE2. The influence of organic matter, both in the extraction and quantification, was evaluated and it was observed that its presence in the solution did not affect considerably the calibration curve. Recovery rates were also determined, ranging from 77% to 106% for ultrapure water and from 104% to 115% for waste water samples, the most complex ones in what concerns matrix effects. Results obtained when applying the proposed method to real water samples can be considered quite satisfying. Moreover, the obtained working ranges encompass values generally reported in literature, confirming the practical use of the method for environmental samples.

Simultaneous quantitative determination of multiple mycotoxins in cereal and feedstuff samples by a suspension array immunoassay

Mycotoxins produced by different species of fungi may coexist in single cereal and feedstuff samples, which could become highly toxic for humans and animals. In order to quantify four mycotoxins (zearalenone, fumonisin B1, deoxynivalenol, and aflatoxin B1) in cereal and feedstuff samples simultaneously, a new suspension array immunoassay was developed. Antimycotoxin monoclonal antibodies were conjugated to the surface of different encoding microspheres (19#, 37#, 39#, and 49#), and mycotoxin-protein conjugates were then coupled with biotin. Using streptavidin-phycoerythrin as a signal reporter protein, this direct competition multiple suspension array immunoassay was optimized. The results showed that the detection limits for zearalenone, fumonisin B1, deoxynivalenol, and aflatoxin B1 were 0.51, 6.0, 4.3, and 0.56 ng/mL, respectively, with detection ranges of 0.73-6.8, 11.6-110.3, 8.6-108.1, and 1.1-14.1 ng/mL, respectively. For the detection of the spiked samples, the recovery rates were between 92.3% and 115.5%. This method also shows a good correlation coefficient (r = 0.99, P < 0.01) with liquid chromatography-tandem mass spectrometry in the detection of toxins in commercial cereal and feedstuff samples. This suspension array immunoassay was high-throughput and accurate for the rapid quantitative detection of multiple mycotoxins in commercial cereal and feedstuff samples.

Novel chemiluminescence immunoassay for the determination of zearalenone in food samples using gold nanoparticles labeled with streptavidin-horseradish peroxidase

A novel highly sensitive chemiluminescence immunoassay (CLIA) was developed to detect zearalenone in food samples by using both biotinylated zearalenone conjugates and gold (Au) nanoparticles labeled with streptavidin-horseradish peroxidase for signal amplification. Biotinylated zearalenone-ovalbumin conjugates and Au nanoparticles labeled with streptavidin-horseradish peroxidase were synthesized separately. The concentrations of immunoreagents and the reaction times of these immunoreagents were optimized to improve the performances of analytical methods. For the CLIA based on biotinylated zearalenone conjugates and Au nanoparticles labeled with streptavidin-horseradish peroxidase, the limit of detection was 0.008 ng/mL and the IC50 was 0.11 ng/mL. The linear working range was 0.02-0.51 ng/mL. The cross-reactivities with the zearalenone analogues (α-zearalanol, zearalanone, α-zearalenol, β-zearalanol, and β-zearalenol) were 32, 17, 12, 0.3, and 0.1%, respectively. The recovery rates in spiked food samples were 97-117%, and the intraday and interday relative standard deviations were both <10%. Parallel analysis of natural food samples showed a good correlation between this novel CLIA and liquid chromatography-tandem mass spectrometry. This method provides a rapid, accurate, and highly sensitive method to determine levels of zearalenone in food samples.

Development of a new polyclonal antibody for the determination of polychlorinated biphenyls in indoor air by ic-ELISA

A new polyclonal antibody (pAb) was prepared and used for the determination of polychlorinated biphenyls (PCBs) in air samples to promote the application of immunoassay technology in the determination of PCBs. Three PCB congeners immunogen mixture was used to stimulate immune responses in rabbits. The specific pAb to PCBs was obtained and used to develop an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA). A standard curve for Aroclor 1248 was prepared using concentrations ranging from 0.1 to 100 μg L(-1). The average IC50 value was 16.21 μg L(-1) and the limit of detection at 10% inhibition (IC90) was 0.069 μg L(-1). The entire procedure was then evaluated using spiked air samples. The recoveries of Aroclor 1248 at various spiking levels in the air samples ranged from 84 to 113%, with relative standard deviations of 3 to 6%. Under optimum conditions, the cross-reactivity profiles of the assays were obtained using three selected congeners, four Aroclor products, and other structurally related compounds of PCBs. The assays were found to be highly specific for PCB congeners and Aroclors 1248 and 1242. The air samples were then analyzed using gas chromatography coupled with high-resolution mass spectrometry to confirm the ic-ELISA results. The attained results demonstrated that the proposed method was an effective and inexpensive technique for the PCBs determination in air samples.

Biotechnological tools for environmental sustainability: prospects and challenges for environments in Nigeria-a standard review

The environment is a very important component necessary for the existence of both man and other biotic organisms. The degree of sustainability of the physical environment is an index of the survival and well-being of the entire components in it. Additionally, it is not sufficient to try disposing toxic/deleterious substances with any known method. The best method of sustaining the environment is such that returns back all the components (wastes) in a recyclable way so that the waste becomes useful and helps the biotic and abiotic relationship to maintain an aesthetic and healthy equilibrium that characterizes an ideal environment. In this study, the method investigated includes biological method of environmental sustainability which seeks to investigate the various biotechnological tools (biotools) in current use and those undergoing investigations for future use.

Isolation of alpaca anti-hapten heavy chain single domain antibodies for development of sensitive immunoassay

Some unique subclasses of Camelidae antibodies are devoid of the light chain, and the antigen binding site is comprised exclusively of the variable domain of the heavy chain (VHH). Although conventional antibodies dominate current assay development, recombinant VHHs have a high potential as alternative reagents for the next generation of immunoassay. We expressed VHHs from an immunized alpaca and developed a VHH-based immunoassay using 3-phenoxybenzoic acid (3-PBA), a major metabolite of pyrethroid insecticides as a model system. A phage VHH library was constructed, and seven VHH clones were selected by competitive binding with 3-PBA. The best immunoassay developed with one of these VHHs showed an IC(50) of 1.4 ng/mL (limit of detection (LOD) = 0.1 ng/mL). These parameters were further improved by using the phage borne VHH, IC(50) = 0.1 ng/mL and LOD = 0.01 ng/mL. Both assays showed a similar tolerance to methanol and dimethylsulfoxide up to 50% in assay buffer. The assay was highly specific to 3-PBA and its 4-hydroxylated derivative, 4-hydroxy 3-PBA, (150% cross reactivity) with negligible cross reactivity with other tested structural analogues, and the recovery from spiked urine sample ranged from 80 to 112%. In conclusion, a highly specific and sensitive VHH for 3-PBA was developed using sequences from immunized alpaca and phage display technology for antibody selection.

Noncompetitive phage anti-immunocomplex real-time polymerase chain reaction for sensitive detection of small molecules

Immuno polymerase chain reaction (IPCR) is an analytical technology based on the excellent affinity and specificity of antibodies combined with the powerful signal amplification of polymerase chain reaction (PCR), providing superior sensitivity to classical immunoassays. Here we present a novel type of IPCR termed phage anti-immunocomplex assay real-time PCR (PHAIA-PCR) for the detection of small molecules. Our method utilizes a phage anti-immunocomplex assay (PHAIA) technology in which a short peptide loop displayed on the surface of the M13 bacteriophage binds specifically to the antibody-analyte complex, allowing the noncompetitive detection of small analytes. The phagemid DNA encoding this peptide can be amplified by PCR, and thus, this method eliminates hapten functionalization or bioconjugation of a DNA template while providing improved sensitivity. As a proof of concept, two PHAIA-PCRs were developed for the detection of 3-phenoxybenzoic acid, a major urinary metabolite of some pyrethroid insecticides, and molinate, a herbicide implicated in fish kills. Our results demonstrate that phage DNA can be a versatile material for IPCR development, enabling universal amplification when the common element of the phagemid is targeted or specific amplification when the real time PCR probe is designed to anneal the DNA encoding the peptide. The PHAIA-PCRs proved to be 10-fold more sensitive than conventional PHAIA and significantly faster using magnetic beads for rapid separation of reactants. The assay was validated with both agricultural drain water and human urine samples, showing its robustness for rapid monitoring of human exposure or environmental contamination.

Immunoaffinity chromatography

Antibody-based separation methods, such as immunoaffinity chromatography (IAC), are powerful purification and isolation techniques. Antibodies isolated using these techniques have proven highly efficient in applications ranging from clinical diagnostics to environmental monitoring. IAC is an efficient antibody separation method which exploits the binding efficiency of a ligand to an antibody. Essential to the successful design of any IAC platform is the optimisation of critical experimental parameters such as: (a) the biological affinity pair, (b) the matrix support, (c) the immobilisation coupling chemistry, and (d) the effective elution conditions. These elements and the practicalities of their use are discussed in detail in this review. At the core of all IAC platforms is the high-affinity interactions between antibodies and their related ligands; hence, this review entails a brief introduction to the generation of antibodies for use in IAC and also provides specific examples of their potential applications.

Development of a noncompetitive phage anti-immunocomplex assay for brominated diphenyl ether 47

We present a new application of the noncompetitive phage anti-immunocomplex assay (PHAIA) by converting an existing competitive assay to a versatile noncompetitive sandwich-type format using immunocomplex binding phage-borne peptides to detect the brominated flame retardant, brominated diphenyl ether 47 (BDE 47). Three phage-displayed 9-mer disulfide-constrained peptides that recognize the BDE 47-polyclonal antibody immunocomplex were isolated. The resulting PHAIAs showed variable sensitivities, and the most sensitive peptide had a dose-response curve with an SC(50) (concentration of analyte producing 50% saturation of the signal) of 0.7ng/ml BDE 47 and a linear range of 0.3-2ng/ml, which was nearly identical to the best heterologous competitive format (IC(50) of 1.8ng/ml, linear range of 0.4-8.5/ml). However, the PHAIA was 1400-fold better than homologous competitive assay. The validation of the PHAIA with extracts of house furniture foam as well as human and calf sera spiked with BDE 47 showed overall recovery of 80-113%. The PHAIA was adapted to a dipstick format (limit of detection of 3.0ng/ml), and a blind test with six random extracts of local house furniture foams showed that the results of the PHAIA and dipstick assay were consistent, giving the same positive and negative detection.

Refractometric sensing using propagating versus localized surface plasmons: a direct comparison

We present a direct experimental comparison between the refractive index sensing capabilities of localized surface plasmon resonances (LSPRs) in gold nanodisks and propagating surface plasmon resonances (SPRs) on 50 nm gold films. The comparison is made using identical experimental conditions, and for the same resonance wavelength, lambda(SP) congruent with 700 nm. Biosensing experiments with biotin-avidin coupling reveal that the two sensing platforms have very similar performance, despite a superior bulk refractive index sensing figure of merit for the SPR sensor. The results demonstrate that LSPR sensing based on simple transmission or reflection measurements is a highly competitive technique compared to the traditional SPR sensor.