Recent developments in fluorescent sensors for trace-level determination of toxic-metal ions

The complexometric behavior of selected aroyl-S,N-ketene acetals shows that they are more than AIEgens

Using the established synthetic methods, aroyl-S,N-ketene acetals and subsequent bi- and multichromophores can be readily synthesized. Aside from pronounced AIE (aggregation induced emission) properties, these selected examples possess distinct complexometric behavior for various metals purely based on the underlying structural motifs. This affects the fluorescence properties of the materials which can be readily exploited for metal ion detection and for the formation of different metal-aroyl-S,N-ketene acetal complexes that were confirmed by Job plot analysis. In particular, gold(I), iron(III), and ruthenium (III) ions reveal complexation enhanced or quenched emission. For most dyes, weakly coodinating complexes were observed, only in case of a phenanthroline aroyl-S,N-ketene acetal multichromophore, measurements indicate the formation of a strongly coordinating complex. For this multichromophore, the complexation results in a loss of fluorescence intensity whereas for dimethylamino-aroyl-S,N-ketene acetals and bipyridine bichromophores, the observed quantum yield is nearly tripled upon complexation. Even if no stable complexes are formed, changes in absorption and emission properties allow for a simple ion detection.

Chromene-chromene Schiff base as a fluorescent chemosensor for Th4+ and its application in bioimaging of Caenorhabditis elegans

The manuscript presents the synthesis of a new di-chromene Schiff base (COM-CH) by combining 7-(diethylamino)-2-oxo-2H-chromene-3-carbohydrazide and 4-oxo-4H-chromene-3-carbaldehyde, and its characterization using various analytical techniques. The probe COM-CH functional group contains a hard donor atom that selectively complexes with Th4+ ions. This report investigated COM-CH's sensing ability towards Th4+ chromogenic and fluorogenic methods in ACN: H2O (8:2, v/v) with Th4+ ions. The COM-CH-Th4+ complex was excited at 430 nm, resulting in a bright emission band at 475 nm with a 45 nm Stokes shift. The COM-CH probe demonstrated the highest performance at pH 4.0 to 8.0, with a sensitivity of 18.7 nM. The complex formation of COM-CH with Th4+ was investigated using NMR, FTIR spectrometry, and density functional theory calculations. The COM-CH and Th4+ are bound with 2:1 stoichiometry and an association constant of 1.92 × 108 M-2. The probe's performance enabled the analysis of monazite sand and water samples for Th4+ content. The probe successfully detected Th4+ content in Caenorhabditis elegans, marking the first Th4+ detection in animal models.

A quinoline derived Schiff base as highly selective 'turn-on' probe for fluorogenic recognition of Al3+ ion

A quinoline-derived Schiff base QnSb has been synthesized for fluorescent and colorimetric recognition of Al3+ ions in a semi-aqueous medium. The compound QnSb has been characterized by elemental analysis, FT-IR, 1H/13C NMR, UV-Vis and fluorescence spectral techniques. The crystal structure of the QnSb was confirmed by single crystal X-ray diffraction (SC-XRD) analysis. Notably, almost non-fluorescent QnSb served as a 'turn on' responsive probe for Al3+ by inducing a remarkable fluorescence enhancement at 422 nm when excited at 310 nm. The probe QnSb exhibited high selectivity for Al3+ in CH3CN/H2O (4:1, v/v) solution over several competing metal ions (e.g., Mg2+, Pb2+, Zn2+, Cd2+, Co2+, Cu2+, Ca2+, Ni2+, Fe3+/2+, Cr3+, Mn2+, Sn2+, and Hg2+). The limit of detection (LoD) was computed as low as 15.8 nM which is significantly lower than the permissible limit set by WHO for Al3+ ions in drinking water. A 1:1 binding stoichiometry of complex QnSb-Al3+ was established with the help of Job's plot, ESI-MS, NMR and DFT analyses. Based on its remarkable sensing ability, the probe QnSb was utilized to establish molecular logic gates, and the fluorescence detection of Al3+ could clearly be demonstrated on the filter paper test strips.

Synthesis of Di(thiophen-2-yl) Substituted Pyrene-Pyridine Conjugated Scaffold and DFT Insights: A Selective and Sensitive Colorimetric, and Ratiometric Fluorescent Sensor for Fe(III) Ions

In this context, we used the multicomponent Chichibabin pyridine synthesis reaction to synthesize a novel di(thiophen-2-yl) substituted and pyrene-pyridine fluorescent molecular hybrid. The computational (DFT and TD-DFT) and experimental investigations were performed to understand the photophysical properties of the synthesized new structural scaffold. The synthesized ligand displays highly selective fluorescent sensing properties towards Fe3+ ions when compared to other competitive metal ions (Al3+, Ba2+, Ca2+, Cd2+, Co2+, Cr3+, Cu2+, Fe2+, Hg2+, Na+, Ni2+, Pb2+, Sr2+, Sn2+ and Zn2+). The photophysical properties studies reveal that the synthesized hybrid molecule has a binding constant of 2.30 × 103 M-1 with limit of detection (LOD) of 4.56 × 10-5 M (absorbance mode) and 5.84 × 10-5 M (emission mode) for Fe3+ ions. We believe that the synthesized pyrene-conjugated hybrid ligand can serve as a potential fluorescent chemosensor for the selective and specific detection of Fe3+ ions.

Turn-on fluorogenic sensors based on an anthraquinone signaling unit for the detection of Zn(II) and Cd(II) ions

Turn-on fluorescent chemosensors based on an anthraquinone moiety, N,N'-(9,10-dioxo-9,10-dihydroanthracene-1,8-diyl)bis(2-(bis(pyridin-2-ylmethyl)amino)acetamide) (1) and N,N'-(9,10-dioxo-9,10-dihydroanthracene-2,6-diyl)bis(2-(bis(pyridin-2-ylmethyl)amino)acetamide) (2), have been successfully synthesized with the overall yields of 61% and 90%, respectively. The structures of both chemosensors 1 and 2 were elucidated using several spectroscopic techniques such as 1H NMR, 13C NMR, 2D-NMR, FTIR and HRMS. The target chemosensor 1 is a promising tool for the detection of trace levels of d10 metal ions, such as Zn(II) and Cd(II) ions, by exhibiting a significant fluorescence enhancement via a turn-on photoinduced electron transfer (PET) mechanism with a rapid and highly reproducible signal, and low detection limit values of 0.408 μM and 0.246 μM, for Zn(II) and Cd(II), respectively.

Eu3+ Complex-Based Superhydrophobic Fluorescence Sensor for Cr(VI) Detection in Water

Cr(VI) compounds are bioaccumulative and highly toxic pollutants, and there is a need for simple and fast detection methods to monitor their trace levels. In this work, we developed a Eu3+ complex-based fluorescence sensor to easily detect Cr(VI) in water droplets. Our sensor consists of a nanofibrous membrane electrospun with a blend of polyvinylidene fluoride (PVDF), silica particles, and Eu3+ complex. Upon modifying the membrane surface with fluoroalkyl chemistry, the sensor displayed superhydrophobicity. When a water droplet with Cr(VI) was placed on such a superhydrophobic fluorescence sensor, the overlapping absorption of Cr(VI) and Eu3+ complex facilitated the inner filter effect, allowing the selective detection of Cr(VI) down to 0.44 µM (i.e., 45.76 µg L-1). We proposed and designed of new inexpensive and fast sensor for the detection of Cr(VI).

Multifunctional nanomaterials and nanocomposites for sensing and monitoring of environmentally hazardous heavy metal contaminants

The applications of conventional sensors are limited by the long response time, high cost, large detection limit, low sensitivity, complicated usage and low selectivity. These sensors are nowadays replaced by Nanocomposite-based modalities and nanomaterials which are known for their high selectivity and physical and chemical properties. These nanosensors effectively detect heavy metal contaminants in the environment as the discharge of heavy metals into natural water as a result of human activity has become a global epidemic. Exposure to these toxic metals might induce many health-related complications, including kidney failure, brain injury, immune disorders, muscle paleness, cardiac damage, nervous system impairment and limb paralysis. Therefore, designing and developing novel sensing systems for the detection and recognition of these harmful metals in various environmental matrices, particularly water, is of extremely important. Emerging nanotechnological approaches in the past two decades have played a key role in overcoming environmentally-related problems. Nanomaterial-based fabrication of chemical nanosensors has widely been applied as a powerful analytical tool for sensing heavy metals. Portability, high sensitivity, on-site detection capability, better device performance and selectivity are all advantages of these nanosensors. The detection and selectivity have been improved using molecular recognition probes for selective binding on different nanostructures. This study aims to evaluate the sensing properties of various nanomaterials such as metal-organic frameworks, fluorescent materials, metal-based nanoparticles, carbon-based nanomaterials and quantum dots and graphene-based nanomaterials and quantum dots for heavy metal ions recognition. All these nano-architectures are frequently served as effective fluorescence probes to directly (or by modification with some large or small biomolecules) sense heavy metal ions for improved selectivity. However, efforts are still needed for the simultaneous designing of multiple metal ion-based detection systems, exclusively in colorimetric or optical fluorescence nanosensors for heavy metal cations.

A pH-Based Single-Sensor Array for Discriminating Metal Ions in Water

Human activities, such as mining and manufacturing, expose society and the natural environment to harmful levels of metal ions. Recently, optical sensor arrays for metal ion detection have become popular owing to their favourable features, such as facile sample preparation and the requirement of less expensive instrumentation compared to traditional, spectrometry‐based analysis techniques. Sensor arrays usually consist of numerous optical probes that are used in combination to generate unique analyte responses. In contrast, here we present an array that comprises a single fluorescent sensor, Coum4‐DPA, that produces unique responses to metal ions in different pH environments. With this simple sensing platform, we were able to classify 10 metal ions in different water sources and quantify Pb²⁺ in tap water using just one fluorescent sensor, a few pH buffers and two sets of spectral data. This novel approach significantly decreases time and costs associated with probe synthesis and data collection, making it highly transferrable to real‐world metal sensing applications.

Ratiometric Fluorescent Sensor for Copper(II) and Phosphate Ions from Aminopyrene Derivatives

Three derivatives of 1-aminopyrene are functionalized with 2-picolyl and 2-picolinyl groups and are tested as fluorescent sensors for metal ions. The target compounds are successfully synthesized in yields of 50-90% and characterized by ¹ H-NMR, ¹³ C-NMR, and HRMS. The compound with an amino picolyl group (P1) exhibits an excellent selectivity toward Cu(II) ion as the fluorescent signal shifts from 433 to 630 nm. From a fluorescence titration experiment, the limit of detection for Cu(II) ion is estimated as 0.19 µm. The fluorescence spectral shift by Cu(II) ion is reliant on the use of acetonitrile as a co-solvent, and the results from cyclic voltammetry and UV-Vis spectroscopy suggest that the sensing mechanism involves a coordination complex between the P1, acetonitrile and Cu(II) ion. Furthermore, this P1-Cu complex can also be used as a selective fluorescent sensor for PO₄ ^3- ion with a detection limit of 0.44 µm.

A turn-on fluorescent probe for Lu3+ recognition and bio-imaging in live cells and zebrafish

A new Lu3+ selective fluorescent probe L was synthesized and characterized. The optical properties of L were investigated by using absorption and fluorescence spectral studies in 7 : 3 (v/v) aqueous dimethyl sulphoxide. Upon addition of Lu3+ in a pH 4 (acetate buffer) solution of L, the weakly fluorescent probe L became highly fluorescent. The fluorescence intensity increased five-fold at 490 nm with excitation at 437 nm. The formation of 2 : 1 complexation between L and Lu3+ was confirmed by Job's plot. The binding constant (Ka, 1.43 × 104 M-1) was determined by the Benesi-Hildebrand (BH) method. The limit of detection (LOD) of Lu3+ using L was found to be 23 nM. The binding mechanism of L with Lu3+ was studied by 1H-NMR, ESI mass spectroscopy, and theoretical studies. Further, the probe L was successfully used to bioimage Lu3+ in a zebrafish gill cell line (DrG) and in the yolk, papillae of the eyes, and head of zebrafish embryos (Danio rerio), therefore providing a powerful live imaging approach for investigating chemical signaling in complex multicellular systems.

A Review on Schiff Base Fluorescent Chemosensors for Cell Imaging Applications

Fluorescent determinations of analytes have proven to be a powerful method due to their simplicity, low cost, detection limit, rapid photoluminescence response, and applicability to bioimaging. Fluorescence imaging as a powerful tool for monitoring biomolecules within the living systems. Schiff base has been extensively used as strongly absorbing and colorful chromophores in the design of chemosensors. In recent years, Schiff base based fluorescent probes have been developed for the detection of various toxic analytes and imaging of various analytes in biological systems. This review gives an overview of the important fluorescent sensors which are based on Schiff base, their approaches for molecular recognition, and their potential application in bioimaging studies.

Hg2+ and Cd2+ binding of a bioinspired hexapeptide with two cysteine units constructed as a minimalistic metal ion sensing fluorescent probe

Hg²⁺ and Cd²⁺ complexation of a short hexapeptide, Ac-DCSSCY-NH₂ (DY), was studied by pH-potentiometry, UV and NMR spectroscopy and fluorimetry in aqueous solutions and the Hg²⁺-binding ability of the ligand was also described in an immobilized form, where the peptides were anchored to a hydrophilic resin. Hg²⁺ was demonstrated to form a 1 : 1 complex with the ligand even at pH = 2.0 while Cd²⁺ coordination by the peptide takes place only above pH ∼ 3.5. Both metal ions form bis-ligand complexes by the coordination of four Cys-thiolates at ligand excess above pH ∼ 5.5 (Cd²⁺) and 7.0 (Hg²⁺). Fluorescence studies demonstrated a Hg²⁺ induced concentration-dependent quenching of the Tyr fluorescence until a 1 : 1 Hg²⁺ : DY ratio. The fluorescence emission intensity decreases linearly with the increasing Hg²⁺ concentration in a range of over two orders of magnitude. The fact that this occurs even in the presence of 1.0 eq. of Cd²⁺ per ligand reflects a complete displacement of the latter metal ion by Hg²⁺ from its peptide-bound form. The immobilized peptide was also shown to bind Hg²⁺ very efficiently even from samples at pH = 2.0. However, the existence of lower affinity binding sites was also demonstrated by binding of more than 1.0 eq. of Hg²⁺ per immobilized DY molecule under Hg²⁺-excess conditions. Experiments performed with a mixture of four metal ions, Hg²⁺, Cd²⁺, Zn²⁺ and Ni²⁺, indicate that this molecular probe may potentially be used in Hg²⁺-sensing systems under acidic conditions for the measurement of μM range concentrations.

Highly selective CHEF-type chemosensor for lutetium (III) recognition in semi-aqueous media

A simple phosphoryl quinolone (L) based sensor has been synthesized for the selective recognition of Lu³⁺ by spectrofluorimetric method. In methanol-water (1:1, v/v), the ligand L exhibits a weak emission peak at 400 nm upon excitation at 280 nm. Upon interaction with various f-metal and other selected metals from s, p, and d-block elements, the fluorescence of L is selectively enhanced in the presence of Lu³⁺ due to the chelation enhanced fluorescence (CHEF) effects. The quantum yield (φ) of L (φ = 0.063) is enhanced to φ = 0.118 upon chelation with Lu³⁺ ion. From the titration experiment, the limit of detection (LOD) of sensor L to recognize Lu³⁺ is estimated down to 24.2 nM, which is much lower than the WHO guidelines (76 μM) in drinking water. The formation of host-guest complexation between L and Lu³⁺ in 2:1 binding stoichiometry is studied by Job's method and the binding constant is estimated by band fit analysis (logK_f = 5.1). Further, the coordination behaviour between L and Lu³⁺ is well supported by FT-IR, ¹H NMR, ¹³C NMR, ³¹P NMR, ESI mass spectral data and the theoretical results.

Fluorescence-Based Detection of Benzene, Toluene, Ethylbenzene, Xylene, and Cumene (BTEXC) Compounds in Fuel-Contaminated Snow Environments

Reported herein is the sensitive and selective cyclodextrin-promoted fluorescence detection of benzene, toluene, ethylbenzene, xylene, and cumene (BTEXC) fuel components in contaminated snow samples collected from several locations in the state of Rhode Island. This detection method uses cyclodextrin as a supramolecular scaffold to promote analyte-specific, proximity-induced fluorescence modulation of a high-quantum-yield fluorophore, which leads to unique fluorescence responses for each cyclodextrin-analyte-fluorophore combination investigated and enables unique pattern identifiers for each analyte using linear discriminant analysis (LDA). This detection method operates with high levels of sensitivity (sub-micromolar detection limits), selectivity (100% differentiation between structurally similar compounds, such as ortho-, meta-, and para-xylene isomers), and broad applicability (for different snow samples with varying chemical composition, pH, and electrical conductivity). The high selectivity, sensitivity, and broad applicability of this method indicate significant potential in the development of practical detection devices for aromatic toxicants in complex environments.

Selective Determination of Cr(VI) by Glutaraldehyde Cross-Linked Chitosan Polymer Fluorophores

Selective determination of aquatic chromium is critically important because of the dramatic differences in health and environment impacts by trivalent and hexavalent forms of chromium; however, it is challenging. In this work, for the first time, a nonconjugated polymer fluorophore (GCPF) was synthesized by cross-linking chitosan with glutaraldehyde via Schiff base reactions and systematically investigated for selective determination of Cr(VI). The results revealed that the synthesized GCPF exhibited excellent photostability and water solubility. More importantly, GCPF possessed dramatically enhanced fluorescence intensity originated from the n-π* transitions of the Schiff base subfluorophore groups (e.g., C═N) that can be selectively and sensitively quenched by Cr(VI) through oxidative damages to C═N group. An effective EDTA masking agent approach was employed to minimize ionic interferences. In the presence of high concentration of interference ions including Cr(III), the quenching GCPF fluorescence is capable of selectively determining Cr(VI) within a concentration range up to 50 μM and a detection limit of 0.22 μM. The analytical performance of GCPF was also confirmed by analyzing real surface water and industrial samples.

Synthesis of novel AIEE active pyridopyrazines and their applications as chromogenic and fluorogenic probes for Hg2+ detection in aqueous media

A series of AIEE active novel pyridopyrazine derivatives showing selective and sensitive detection of Hg²⁺ in aqueous media is reported.

A Simple Spectrofluorimetric Method for Iron Determination with a Chalcone-Based Schiff Base

A chalcone-based Schiff base (5), capable of detecting iron (III) in partially aqueous media, has been designed, then synthesized by the condensation of 3-formyl-2-hydroxyquinoline and acetophenone. To determine iron (III) ion, a simple spectrofluorimetric method was developed by using the synthesized Schiff base. The developed method was validated by analyzing the certified reference material (CRM-SA-C Sandy Soil C). During the process of the determination of iron in food samples, satisfactory accuracy was obtained for spinach and rocket. Nitric acid and hydrogen fluoride were used for the digestion of the certified reference material whereas only nitric acid was used for food samples, in a closed microwave system. Measurements were carried out by using the modified standard addition method. The standard addition graph was linear until 5.0 mg/L. in determination of iron (III). Detection and quantification limits were 0.06 and 0.20 mg/L., respectively. The presented method is simple, time-saving, cost-effective and suitable for determination of iron content of soil and foods.

Salicylyl Fluorene Derivatives as Fluorescent Sensors for Cu(II) Ions

Two derivatives of fluorene containing salicylic acid groups are successfully synthesized by palladium-catalyzed coupling reactions and subsequent hydrolysis of salicylate esters. The compounds are characterized by various spectroscopic methods. In phosphate buffer (pH 8.0) solutions, these compounds are well soluble. They show maximum absorption wavelengths in the range of 304-330 nm and exhibit maximum emission wavelength around 420 and 430 nm with the quantum yields of 2.7 and 4.4 %, respectively. The compound with alkynyl salicylate groups (2) exhibits a selective fluorescence quenching towards Cu(II) and Fe(II) with a relatively similar sensitivity. The selectivity favoring Cu(II) over Fe(II) and other metal ions can be achieved upon the addition of 30 μM Triton X-100. The Cu(II) detection limit in solution phase is 1.47 ppb. The fluorescence signal recovery upon the addition of EDTA indicate a reversible complexation between 2 and Cu(II) ion. Fabrication of 2 on filter paper using a 50 μM solution in THF affords a naked-eye detection for Cu(II) and Fe(II) in aqueous media at picomole level.

Selective and sensitive colorimetric sensor for CN− in the absence and presence of metal ions (Cu2+/Ni2+): mimicking logic gate behaviour

Enone based anion sensors have significance due to their colorimetric reaction upon deprotonation and variable occurrence in the conjugated moiety.

Highly selective colorimetric and reversible fluorometric turn-off sensors based on the pyrimidine derivative: mimicking logic gate operation and potential applications

Two simple and efficient energy transfer based fluorogenic receptors exhibiting high sensitivity for the Ni²⁺ ion and its validation using DFT geometry optimization.