Magnetic graphene oxide: Synthesis approaches, physicochemical characteristics, and biomedical applications

A novel colorimetric sensor composed from alkaline phosphatase-graphene oxide nanoconjugates and enzyme induced gold nanoparticle aggregation for the detection of deoxynivalenol-3-glucoside

Grains and goji berry are highly susceptible to fungal and mycotoxin during the processing and storage. Current detection methods require the use of complex sample preparation, expensive analytical platforms and professional operators, making rapid on-site detection difficult. This study explored a sensor based on β-Co(OH)2 nanosheets mediated composite material from graphene oxide (MGO), polyethyleneimine (PEI), and alkaline phosphatase (ALP) referred as MGO@PEI-ALP conjugate for the detection of masked mycotoxin (Deoxynivalenol-3-glucoside, D3G) in goji berries. The new sensor was able to detect D3G in the range of 0.50-3.50 mg/L with a 0.30 mg/L limit of detection, well below the maximum standard limit (1.0 mg) specified by the European Union. Meanwhile, this method could effectively remove D3G from complex dietary agricultural products. This study suggested a rapid visualization approach for the recognition of masked mycotoxin, offering valuable insights for food safety and quality.

Novel non-glutaraldehyde bioprosthetic heart valve construction strategy based on ATRP with enhanced anticoagulant and anti-calcification properties

Minimally invasive transcatheter heart valve replacement (THVR) has provided a more convenient and effective means for curing heart valve diseases and defects. Bioprosthetic heart valves (BHVs), with superior hemodynamic performance and no need for long-term anticoagulation, have become the first choice for THVR in recent years. However, almost all the clinically used BHVs are crosslinked by glutaraldehyde, and due to calcification, inflammation, difficulty in endothelialization and other factors, the service cycle of these glutaraldehyde crosslinked BHVs is affected, thus limiting their further application. To avoid defects of these glutaraldehyde crosslinked BHVs, a novel non-glutaraldehyde synergistic crosslinking and modification strategy based on ATRP (atom transfer radical polymerization) has been developed in this study. Firstly, the decellularized porcine pericardium (D-PP) is grafted with an alkyl bromine group (Br-PP) to initiate the ATRP reaction, and then the four-arm double-bond substance is used to achieve crosslinked PP (PT-PP) through the in situ ATRP reaction to endow PT-PP with good mechanical properties. Finally, utilizing the advantage of controllable and active polymerization of ATRP, the surface of PT-PP can be further functionalized with sulfonic acid groups by the secondary polymerization to obtain the functionalized PP (PT-BS-PP). The feasibility of non-glutaraldehyde crosslinked and functionalized PPs has been further systematically evaluated as a potential leaflet material of BHVs. Good biocompatibility, superior anticoagulation properties, minimal immune rejection, enhanced endothelialization potential and excellent anti-calcification effects of the functionalized PT-BS-PP have been proven by in vitro and in vivo investigations, suggesting that PT-BS-PP is a great potential candidate for the further clinical applications of BHVs.

Photocatalytic degradation of organic pollutants in wastewater using magnetic functionalized reduced graphene oxide nanocomposites. A review

Potable water supply has become a significant global concern due to the prevalent nature of organic dyes and pharmaceutical and agricultural chemical pollutants found in water resources. This has necessitated ongoing research on the development of efficient materials and relevant wastewater treatment methods. In this regard, the photocatalysis method has emerged as one of the superior wastewater treatment techniques due to its outstanding application advantages. Therefore, this review is an attempt to summarise the research carried out on the applications of magnetic functionalized reduced graphene oxide nanocomposites in the heterogeneous photocatalytic degradation of organic pollutants found in wastewater. Furthermore, it provides valuable insights into the synthesis methods and characterization of these materials to evaluate their physicochemical and structural properties. These nanocomposites have magnetic properties for rapid catalyst separation from aqueous solution, high electrical conductivity, and thermal properties to improve photocatalytic activities. During photocatalysis, reduced graphene oxide serves as an acceptor and transporter of photogenerated electrons and provides pollutant binding sites, whereas the magnetic properties of the nanocomposite enable reusability of the photocatalyst. Therefore, the regeneration of photocatalysts is significant for toxic waste disposal and economic viability, and it improves the sustainability of the process. Finally, we summarized research constraints and future perspectives associated with the applications of these nanocomposites in wastewater treatment.

Bifunctional sheets reduce the microbe and endotoxin contamination of tissue-derived collagen

Tendon-derived type I collagen is an essential biomaterial for various biomedical devices due to its inherent bioactivity and favorable environment for cells. Correspondingly, microbial and endotoxin contamination can be easily introduced during the collagen extraction process, which is generally overlooked in fundamental scientific research, especially the endotoxin residue. Conventional approaches for mitigating endotoxin exhibit limited effectiveness when applied to biomacromolecule products because of viscosity, clogging, and diminished bioactivity. In this study, we developed a bifunctional sheet that can simultaneously reduce the microbe and endotoxin contamination in collagen solution by co-incubation and subsequent magnetic separation, avoiding the issues of blockage and bioactivity impairment. The bifunctional sheet was successfully fabricated by modifying the magnetic graphene oxide with histamine. Collagen products treated by sheets exhibited reduced microbial and endotoxin contamination while maintaining their bioactivity for encapsulated cell growth. Additionally, inflammatory stimulation of collagen was decreased in vitro and in vivo after treatment. This work may present a facile approach for diminishing microbe and endotoxin residues in collagen products in basic research, obviating the non-essential use of a sterile workshop and facilitating the development of tissue-derived collagen research.

A Review of Different Synthesis Approaches to Nanoparticles: Bibliometric Profile

Nanomaterials are currently one of the most popular emerging materials used in different applications such as drug delivery, water treatment, cancer treatment, electronic, food preservations, and production of pesticide. This is due to their interesting features including size-dependent properties, lightweight, biocompatibility, amphiphilicity and biodegradability. They offer wide possibilities for modification and are used in multiple functions with enormous possibilities. Some of them are medically suitable which has opened new opportunities for medical improvement especially for human health. These characteristics also make nanomaterials one of the pioneers in green materials for various needs, especially in environmental engineering and energy sectors. In this review, several synthesis approaches for nanoparticles mainly physical, chemical, and biological have been discussed extensively. Furthermore, bibliometric analysis on the synthesis of nanoparticles was evaluated. About 117,162 publications were considered, of which 92% are journal publications. RSC Advances is the most published outlet on the synthesis of nanoparticles and China has the highest number of researchers engaged in the synthesis of nanoparticles. It was noted in the evaluation of synthesis approach that biological approach is the savest method but with a low yield, while the chemical approach offers a high yield with some level of hazardous effect. Also, the bibliometric analysis revealed that the field of nanotechnology is a trending and hot ground for research.

Facile synthesis of a 3D magnetic graphene oxide/Fe3O4/banana peel-derived cellulose composite aerogel for the efficient removal of tetracycline

Many initiatives have incorporated graphene oxide (GO) and biomass into aerogels for wastewater treatment. We report on the facile fabrication of a magnetic GO/Fe3O4/banana peel-derived cellulose (bio-cellulose) aerogel using an ultrasound-assisted mechanical mixing method and freeze-drying technique for the removal of tetracycline (TC). The component materials and composite aerogel were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), nitrogen adsorption-desorption analysis, and vibrating sample magnetometry (VSM). The effects of solution pH and adsorbent dose on the adsorption performance of the synthesized adsorbents were investigated. The adsorption behavior at the equilibrium of the GO/Fe3O4/bio-cellulose aerogel was studied and analyzed using four well-known non-linear models: Langmuir, Freundlich, Sips, and Temkin. The results showed that the experimental data fitted well with the Freundlich and Sips isotherm models. The maximum adsorption capacity achieved from the Sips model was 238.7 mg g-1. The adsorption kinetics were studied and proved to follow the Elovich kinetic model with an initial rate of 0.89 g g-1 min-1. These results confirm the favorable adsorption of TC on the heterogeneous surface that exhibits a wide range distribution of adsorption energies of the desired GO/Fe3O4/bio-cellulose aerogel. The experimental findings demonstrate that the aerogel possesses the notable features of environmental friendliness, cost-effectiveness, and comparatively high TC adsorption capacity. Therefore, utilizing biomass to develop the structure of the magnetic GO-based composite aerogel is significantly promising for antibiotic-containing wastewater treatments.

Black phosphorus quantum dot-modified ADSCs as a novel therapeutic for periodontitis bone loss coupling of osteogenesis and osteoimmunomodulation

Alveolar bone defect repair remains a persistent clinical challenge for periodontitis treatment. The use of peripheral functional seed cells is a hot topic in periodontitis. Herein, we explored the cellular behaviors and osteogenic ability of adipose-derived mesenchymal stem cells (ADSCs) treated with black phosphorus quantum dots (BPQDs). Additionally, macrophage polarization, osteogenic effects and angiogenesis were investigated through the paracrine pathway regulated by BPQD-modified ADSCs. Our results demonstrated that BPQDs showed good biocompatibility with ADSCs and BPQD-modified ADSCs could improve the bone repair in vivo inflammatory microenvironment by regulating osteogenesis and osteoimmunomodulation. The BPQDs increased the osteogenic differentiation of ADSCs via the Wnt/β-catenin and BMP2/SMAD5/Runx2 signaling pathway. In addition, BPQD-modified ADSCs promoted the osteogenic effect of BMSCs and facilitated the polarization of macrophages from M1 towards M2 phenotype transformation through the paracrine pathway in the periodontitis microenvironment. This strategy provides a novel idea for treatment of alveolar bone defects for periodontitis in the foreseeable future.

Magnetic materials as adsorbents for the pre-concentration and separation of active ingredients from herbal medicine

Herbal medicine (HM) is crucial in disease management and contains complex compounds with few active pharmacological ingredients, presenting challenges in quality control of raw materials and formulations. Effective separation, identification, and analysis of active components are vital for HM efficacy. Traditional methods like liquid-liquid extraction and solid-phase extraction are time-consuming and environmentally concerning, with limitations such as sorbent issues, pressure, and clogging. Magnetic solid-phase extraction uses magnetic sorbents for targeted analyte separation and enrichment, offering rapid, pressure-free separation. However, inorganic magnetic particles' aggregation and oxidation, as well as lack of selectivity, have led to the use of various coatings and modifications to enhance specificity and selectivity for complex herbal samples. This review delves into magnetic composites in HM pretreatment, specifically focusing on encapsulated or modified magnetic nanoparticles and materials like silica, ionic liquids, graphene family derivatives, carbon nanotubes, metal-organic frameworks, covalent organic frameworks, and molecularly imprinted polymers.

Unravelling the potential of magnetic nanoparticles: a comprehensive review of design and applications in analytical chemistry

The study of nanoparticles has emerged as a prominent research field, offering a wide range of applications across various disciplines. With their unique physical and chemical properties within the size range of 1-100 nm, nanoparticles have garnered significant attention. Among them, magnetic nanoparticles (MNPs) exemplify promising super-magnetic characteristics, especially in the 10-20 nm size range, making them ideal for swift responses to applied magnetic fields. In this comprehensive review, we focus on MNPs suitable for analytical purposes. We investigate and classify them based on their analytical applications, synthesis routes, and overall utility, providing a detailed literature summary. By exploring a diverse range of MNPs, this review offers valuable insights into their potential application in various analytical scenarios.

Porous Agarose Layered Magnetic Graphene Oxide Nanocomposite for Virus RNA Monitoring in Wastewater

The detection of virus RNA in wastewater has been established as a valuable method for monitoring Coronavirus disease 2019. Carbon nanomaterials hold potential application in separating virus RNA owing to their effective adsorption and extraction capabilities. However, carbon nanomaterials have limited separability under homogeneous aqueous conditions. Due to the stabilities in their nanostructure, it is a challenge to efficiently immobilize them onto magnetic beads for separation. Here, we develop a porous agarose layered magnetic graphene oxide (GO) nanocomposite that is prepared by agglutinating ferroferric oxide (Fe3O4) beads and GO with agarose into a cohesive whole. With an average porous size of approximately 500 nm, the porous structure enables the unhindered entry of virus RNA, facilitating its interaction with the surface of GO. Upon the application of a magnetic field, the nucleic acid can be separated from the solution within a few minutes, achieving adsorption efficiency and recovery rate exceeding 90% under optimized conditions. The adsorbed nucleic acid can then be preserved against complex sample matrix for 3 days, and quantitatively released for subsequent quantitative reverse transcription polymerase chain reaction (RT-qPCR) detection. The developed method was successfully utilized to analyze wastewater samples obtained from a wastewater treatment plant, detecting as few as 10 copies of RNA molecules per sample. The developed aMGO-RT-qPCR provides an efficient approach for monitoring viruses and will contribute to wastewater-based surveillance of community infections.

Thawing of Frozen Hairtail (Trichiurus lepturus) with Graphene Nanoparticles Combined with Radio Frequency: Variations in Protein Aggregation, Structural Characteristics, and Stability

Efficient thawing can preserve the quality of frozen hairtail (Trichiurus lepturus) close to that of fresh hairtail. In contrast to air thawing (AT) and radio-frequency thawing (RT), this study looked at how graphene oxide (GO) and graphene magnetic (GM) nanoparticles paired with RT affect the microstructure and protein conformation of hairtails after thawing. The results suggested that GM-RT can reduce the myofibrillar protein (MP) damage and be more effective than other thawing treatments, like AT, RT, and GO-RT, in maintaining the microstructure of hairtail. The particle size and zeta potential showed that GM-RT could reduce the aggregation of MP during the thawing process compared to other thawing methods. Moreover, the texture of the hairtail after GM-RT exhibited higher hardness (1185.25 g), elasticity (2.25 mm), and chewiness (5.75 mJ) values compared to other thawing treatments. Especially compared with RT, the GM-RT treatment displayed significant improvements in hardness (27.24%), a considerable increase in springiness (92.23%), and an increase in chewiness (57.96%). GO-RT and GM-RT significantly reduced the centrifugal loss. The scanning electron microscopy results demonstrated that the effect of GM-RT was more akin to that of a fresh sample (FS) and characterized by a well-organized microstructure. In conclusion, GM-RT effectively diminished the MP aggregation and improved the texture of thawed fish. It can be regarded as a viable alternative thawing technique to enhance MP stability, which is vital for preserving meat quality.

Magnetic Graphene Oxide Nanocomposites Boosts Craniomaxillofacial Bone Regeneration by Modulating circAars/miR-128-3p/SMAD5 Signaling Axis

Background

The ability of nanomaterials to induce osteogenic differentiation is limited, which seriously imped the repair of craniomaxillofacial bone defect. Magnetic graphene oxide (MGO) nanocomposites with the excellent physicochemical properties have great potential in bone tissue engineering. In this study, we aim to explore the craniomaxillofacial bone defect repairment effect of MGO nanocomposites and its underlying mechanism.

Methods

The biocompatibility of MGO nanocomposites was verified by CCK8, live/dead staining and cytoskeleton staining. The function of MGO nanocomposites induced osteogenic differentiation of BMSCs was investigated by ALP activity detection, mineralized nodules staining, detection of osteogenic genes and proteins, and immune-histochemical staining. BMSCs with or without MGO osteogenic differentiation induction were collected and subjected to high-throughput circular ribonucleic acids (circRNAs) sequencing, and then crucial circRNA circAars was screened and identified. Bioinformatics analysis, Dual-luciferase reporter assay, RNA binding protein immunoprecipitation (RIP), fluorescence in situ hybridization (FISH) and osteogenic-related examinations were used to further explore the ability of circAars to participate in MGO nanocomposites regulation of osteogenic differentiation of BMSCs and its potential mechanism. Furthermore, critical-sized calvarial defects were constructed and were performed to verify the osteogenic differentiation induction effects and its potential mechanism induced by MGO nanocomposites.

Results

We verify the good biocompatibility and osteogenic differentiation improvement effects of BMSCs mediated by MGO nanocomposites. Furthermore, a new circRNA-circAars, we find and identify, is obviously upregulated in BMSCs mediated by MGO nanocomposites. Silencing circAars could significantly decrease the osteogenic ability of MGO nanocomposites. The underlying mechanism involved circAars sponging miR-128-3p to regulate the expression of SMAD5, which played an important role in the repair craniomaxillofacial bone defects mediated by MGO nanocomposites.

Conclusion

We found that MGO nanocomposites regulated osteogenic differentiation of BMSCs via the circAars/miR-128-3p/SMAD5 pathway, which provided a feasible and effective strategy for the treatment of craniomaxillofacial bone defects.

Magnetic graphene oxide nanocomposites induce cytotoxicity in ADSCs via GPX4 regulating ferroptosis

Magnetic graphene oxide nanocomposites (MGO NPs) have been widely studied in biomedical applications. However, their cytotoxicity and underlying mechanisms remain unclear. In this study, the biosafety of MGO NPs was investigated, and the mechanism involved in ferroptosis was further explored. MGO can produce cytotoxicity in ADSCs, which is dependent on their concentration. Ferroptosis was involved in MGO NP-induced ADSC survival inhibition by increasing total ROS and lipid ROS accumulation as well as regulating the expression levels of ferroptosis-related genes and proteins. GPX4 played a critical role in the MGO NP-induced ADSC ferroptosis process, and overexpressing GPX4 suppressed ferroptosis to increase cell survival. This study provides a theoretical basis for the biosafety management of MGO NPs used in the field of biomedical treatment.

Synthesis of Modified Magnetic Graphene Oxide with Mesoporous Silica for Extraction of the Pharmaceutical Compound Quercetin

In this study, magnetic mesoporous silica-Fe3O4-graphene oxide nanoparticles (Fe3O4@GO@mSiO2) were synthesized and used as sorbents for magnetic solid-phase extraction (MSPE) of trace amounts of quercetin in natural samples (spinach, green pepper, dill, and red onion). The sorbent produced was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction (XRD), vibrating sample magnetometry (VSM), and X-ray photoelectron spectroscopy (XPS). The effects of various experimental factors on the percent recovery of quercetin, including extraction time, desorption time, sample solution pH, and adsorbent amount were investigated. The Fe3O4@GO@mSiO2 strategy showed excellent stability and sensitivity for the determination of quercetin, with a suitable linear range of 20-800 µg L-1 and a detection limit of 5.2 µg L-1. The data indicate that Fe3O4@GO@mSiO2 has a specific surface area and suitable adsorption capacity for the determination of quercetin.

A universal strategy for the construction of polymer brush hybrid non-glutaraldehyde heart valves with robust anti-biological contamination performance and improved endothelialization potential

With the intensification of the aging population and the development of transcatheter heart valve replacement technology (THVR), clinical demand for bioprosthetic valves is increasing rapidly. However, commercial bioprosthetic heart valves (BHVs), mainly manufactured from glutaraldehyde cross-linked porcine or bovine pericardium, generally undergo degeneration within 10-15 years due to calcification, thrombosis and poor biocompatibility, which are closely related to glutaraldehyde cross-linking. In addition, endocarditis caused by post-implantation bacterial infection also accelerates the failure of BHVs. Herein, a functional cross-linking agent bromo bicyclic-oxazolidine (OX-Br) has been designed and synthesized to crosslink BHVs and construct a bio-functionalization scaffold for subsequent in-situ atom transfer radical polymerization (ATRP). The porcine pericardium cross-linked by OX-Br (OX-PP) exhibits better biocompatibility and anti-calcification property than the glutaraldehyde-treated porcine pericardium (Glut-PP) as well as comparable physical and structural stability to Glut-PP. Furthermore, the resistance to biological contamination especially bacterial infection of OX-PP along with anti-thrombus and endothelialization need to be enhanced to reduce the risk of implantation failure due to infection. Therefore, amphiphilic polymer brush is grafted to OX-PP through in-situ ATRP polymerization to prepare polymer brush hybrid BHV material SA@OX-PP. SA@OX-PP has been demonstrated to significantly resist biological contamination including plasma proteins, bacteria, platelets, thrombus and calcium, and facilitate the proliferation of endothelial cells, resulting in reduced risk of thrombosis, calcification and endocarditis. Altogether, the proposed crosslinking and functionalization strategy synergistically achieves the improvement of stability, endothelialization potential, anti-calcification and anti-biofouling performances for BHVs, which would resist the degeneration and prolong the lifespan of BHVs. The facile and practical strategy has great potential for clinical application in fabricating functional polymer hybrid BHVs or other tissue-based cardiac biomaterials. STATEMENT OF SIGNIFICANCE: Bioprosthetic heart valves (BHVs) are widely used in valve replacements for severe heart valve disease, and clinical demand is increasing year over year. Unfortunately, the commercial BHVs, mainly cross-linked by glutaraldehyde, can serve for only 10-15 years because of calcification, thrombus, biological contamination, and difficulties in endothelialization. Many studies have been conducted to explore non-glutaraldehyde crosslinkers, but few can meet high requirements in all aspects. A new crosslinker, OX-Br, has been developed for BHVs. It can not only crosslink BHVs but also serve as a reactive site for in-situ ATRP polymerization and construct a bio-functionalization platform for subsequent modification. The proposed crosslinking and functionalization strategy synergistically achieves the high requirements for stability, biocompability, endothelialization, anti-calcification, and anti-biofouling propeties of BHVs.

Au Nanorods on Carbon-Based Nanomaterials as Nanohybrid Substrates for High-Efficiency Dynamic Surface-Enhanced Raman Scattering

Gold nanorods (AuNRs) with different aspect ratios were prepared by the seed-mediated growth method and combined with three carbon-based nanomaterials of multiple dimensions (i.e., zero-dimensional (0D) carbon black (CB), one-dimensional (1D) carbon nanotubes (CNTs), and two-dimensional (2D) graphene oxide (GO)). The AuNR/carbon-based nanomaterial hybrids were utilized in dynamic surface-enhanced Raman scattering (D-SERS). First, cetyltrimethylammonium bromide (CTAB) was used to stabilize and coat the AuNRs, enabling them to be dispersed in water and conferring a positive charge to the surface. AuNR/carbon-based nanomaterial hybrids were then formed via electrostatic attraction with the negatively charged carbon-based nanomaterials. Subsequently, the AuNR/carbon-based nanomaterial hybrids were utilized as large-area and highly sensitive Raman spectroscopy substrates. The AuNR/GO hybrids afforded the best signal enhancement because the thickness of GO was less than 5 nm, which enabled the AuNRs adsorbed on GO to produce a good three-dimensional hotspot effect. The enhancement factor (EF) of the AuNR/GO hybrids for the dye molecule Rhodamine 6G (R6G) reached 1 × 10⁷, where the limit of detection (LOD) was 10^-8 M. The hybrids were further applied in D-SERS (detecting samples transitioning from the wet state to the dry state). During solvent evaporation, the system spontaneously formed many hotspots, which greatly enhanced the SERS signal. The final experimental results demonstrated that the AuNR/GO hybrids afforded the best D-SERS signal enhancement. The EF value for R6G reached 1.1 × 10⁸ after 27 min, with a limit of detection of 10^-9 M at 27 min. Therefore, the AuNR/GO nanohybrids have extremely high sensitivity as molecular sensing elements for SERS and are also very suitable for the rapid detection of single molecules in water quality and environmental management.

Comparative Evaluation of Different Surface Coatings of Fe3O4-Based Magnetic Nano Sorbent for Applications in the Nucleic Acids Extraction

Nucleic acid extraction and purification are crucial steps in sample preparation for multiple diagnostic procedures. Routine methodologies of DNA isolation require benchtop equipment (e.g., centrifuges) and labor-intensive steps. Magnetic nanoparticles (MNPs) as solid-phase sorbents could simplify this procedure. A wide range of surface coatings employs various molecular interactions between dsDNA and magnetic nano-sorbents. However, a reliable, comparative evaluation of their performance is complex. In this work, selected Fe3O4 modifications, i.e., polyethyleneimine, gold, silica, and graphene derivatives, were comprehensively evaluated for applications in dsDNA extraction. A family of single batch nanoparticles was compared in terms of morphology (STEM), composition (ICP-MS/MS and elemental analysis), surface coating (UV-Vis, TGA, FTIR), and MNP charge (ζ-potential). ICP-MS/MS was also used to unify MNPs concentration allowing a reliable assessment of individual coatings on DNA extraction. Moreover, studies on adsorption medium (monovalent vs. divalent ions) and extraction buffer composition were carried out. As a result, essential relationships between nanoparticle coatings and DNA adsorption efficiencies have been noticed. Fe3O4@PEI MNPs turned out to be the most efficient nano sorbents. The optimized composition of the extraction buffer (medium containing 0.1 mM EDTA) helped avoid problems with Fe3+ stripping, which improved the validity of the spectroscopic determination of DNA recovery.

Wettability of graphene oxide functionalized with N-alkylamines: a molecular dynamics study

The wettability of graphene oxide functionalized with N-alkylamines was studied by molecular dynamics simulations. Six different N-alkylamines and two functionalization degrees were reviewed. The nucleophilic ring-opening reaction mechanism between the N-alkylamines and epoxy functional groups of graphene oxide was considered to generate the atomistic models. Water contact angles increased with both the alkyl chain length and substitution degree. The Wenzel model was used to access the effect of both the surface roughness and alkyl chain length on wettability. The results indicated that functionalization introduces an important increase of surface roughness but its effect on wettability is countered by the alkyl chain length.

Magnetic graphene oxide-containing chitosan‑sodium alginate hydrogel beads for highly efficient and sustainable removal of cationic dyes

Developing recyclable and efficient adsorbents for cationic dyes removal from wastewater is crucial for ensuring green ecology and drinking water safety. Herein, we demonstrated a novel magnetic gel bead adsorbent that was synthesized by employing graphene oxide (GO) modified Fe₃O₄ as magnetic nanoparticles doped sodium alginate (SA)/chitosan (CS) gel (SA/GO@Fe₃O₄/CS). The GO@Fe₃O₄ sample was prepared based on GO by the chemical co-precipitation method, which not only reduced the aggregation of Fe₃O₄ but also increases the specific surface area of the composite gel beads. The prepared gel beads were used to adsorb methylene blue (MB), neutral red (NR), and safranine T (ST). The experimental results showed that the adsorption capacity of SA/GO@Fe₃O₄/CS gel beads for MB, NR, and ST reached 21.325 mg/g, 44.654 mg/g and 44.313 mg/g. After five recycles, the removal rates could still reach more than 90% of the original, exhibiting a high recovery rate. Therefore, this paper provides a strategy for the preparation of high efficiency and recyclable cationic dye adsorbents with a large specific surface area.

Effect of magnetic graphene oxide on cellular behaviors and osteogenesis under a moderate static magnetic field

The biological behaviors of magnetic graphene oxide (MGO) in a static magnetic field (SMF) are unknown. The current study is to investigate the cellular behaviors, osteogenesis and the mechanism in BMSCs treated with MGO combined with an SMF. Results showed that the synthetic MGO particles were bio-compatible and could significantly improve the osteogenesis of BMSCs under SMFs, as verified by elevated alkaline phosphatase activity, mineralized nodule formation, and expressions of mRNA and protein levels. Under SMF at the same intensity, the addition of graphene oxide to Fe₃O₄ could increase the osteogenic ability of BMSCs. The Wnt/β-catenin pathway was indicated to be related to the MGO-driven osteogenic behavior of the BMSCs under SMF. Taken together, our findings suggested that MGO under an SMF could promote osteogenesis in BMSCs through the Wnt/β-catenin pathway and hence should attract more attention for practical applications in bone tissue regeneration.