Ultrasound Bone Fracture Sensing and Data Communication: Experimental Results in a Pig Limb Sample

Bone Fracture Sensing Using Ultrasound Pitch-Catch Measurements: A Proof-of-Principle Study

The most common imaging method used to diagnose and monitor bone fractures and healing is multiple radiographic images performed by highly trained professionals with expensive equipment that can expose patients to high levels of ionizing radiation. Here we introduce and illustrate proof-of-concept of a potential alternative method for measuring bone fractures: ultrasound pitch-catch measurement technique. Measurements are performed with two piezoelectric transducers, housed in standard orthopedic screws and fixed on either side of simulated fractures, with and without an orthopedic plate, in ex vivo pig limb bones. Using this measurement method, we were able to detect significant differences between uncut and 2-, 5- and 10-mm-deep bone cuts using a two-sided t-test with an α level of 5%.

Evaluation of a Piezo-Actuated Sensor for Monitoring Elastic Variations of Its Support with Impedance-Based Measurements

This study exposes the assessment of a piezo-actuated sensor for monitoring elastic variations (change in Young’s modulus) of a host structure in which it is attached. The host structure is monitored through a coupling interface connected to the piezo-actuated device. Two coupling interfaces were considered (an aluminum cone and a human tooth) for the experimental tests. Three different materials (aluminum, bronze and steel) were prepared to emulate the elastic changes in the support, keeping the geometry as a fixed parameter. The piezo device was characterized from velocity frequency response functions in pursuance to understand how vibration modes stimulate the electrical resistance through electrical resonance peaks of the sensor. An impedance-based analysis (1–20 kHz) was performed to correlate elastic variations with indexes based on root mean square deviation (RMSD) for two observation windows (9.3 to 9.7 kHz and 11.1 to 11.5 kHz). Results show that imposed elastic variations were detected and quantified with the electrical resistance measurements. Moreover, it was demonstrated that the sensitivity of the device was influenced by the type of coupling interface since the cone was more sensitive than the tooth in both observation windows. As a final consideration, results suggest that bio-structures (fruits and bone, among others) could be studied since these can modify naturally its elastic properties.