Water treatment: Mn-TiO2 synthesized by ultrasound with increased aromatics adsorption

Transcriptomic Analysis of Acetaminophen Biodegradation by Penicillium chrysogenum var. halophenolicum and Insights into Energy and Stress Response Pathways

(1) Background: Acetaminophen (APAP), an active component of many analgesic and antipyretic drugs, is one of the most concerning trace contaminants in the environment and is considered as an emergent pollutant of marine and aquatic ecosystems. Despite its biodegradability, APAP has become a recalcitrant compound due to the growth of the global population, the ease of availability, and the inefficient wastewater treatment applied. (2) Methods: In this study, we used a transcriptomic approach to obtain functional and metabolic insights about the metabolization of APAP by a phenol-degrading fungal strain, Penicillium chrysogenum var. halophenolicum. (3) Results: We determined that the transcriptomic profile exhibited by the fungal strain during APAP degradation was very dynamic, being characterized by an abundance of dysregulated transcripts which were proportional to the drug metabolization. Using a systems biology approach, we also inferred the protein functional interaction networks that could be related to APAP degradation. We proposed the involvement of intracellular and extracellular enzymes, such as amidases, cytochrome P450, laccases, and extradiol-dioxygenases, among others. (4) Conclusions: Our data suggested that the fungus could metabolize APAP via a complex metabolic pathway, generating nontoxic metabolites, which demonstrated its potential in the bioremediation of this drug.

Recent Developments in Sonochemical Synthesis of Nanoporous Materials

Ultrasounds are commonly used in medical imaging, solution homogenization, navigation, and ranging, but they are also a great energy source for chemical reactions. Sonochemistry uses ultrasounds and thus realizes one of the basic concepts of green chemistry, i.e., energy savings. Moreover, reduced reaction time, mostly using water as a solvent, and better product yields are among the many factors that make ultrasound-induced reactions greener than those performed under conventional conditions. Sonochemistry has been successfully implemented for the preparation of various materials; this review covers sonochemically synthesized nanoporous materials. For instance, sonochemical-assisted methods afforded ordered mesoporous silicas, spherical mesoporous silicas, periodic mesoporous organosilicas, various metal oxides, biomass-derived activated carbons, carbon nanotubes, diverse metal-organic frameworks, and covalent organic frameworks. Among these materials, highly porous samples have also been prepared, such as garlic peel-derived activated carbon with an apparent specific surface area of 3887 m2/g and MOF-177 with an SSA of 4898 m2/g. Additionally, many of them have been examined for practical usage in gas adsorption, water treatment, catalysis, and energy storage-related applications, yielding satisfactory results.

The state-of-the-art development of photocatalysts for the degradation of persistent herbicides in wastewater

Herbicides are one of the most recurring pollutants in the aquatic system due to their widespread usage in the agriculture sector for weed control. Semiconductor-based photocatalysts have gained recognition due to their ability to degrade and mineralize pollutants into harmless by-products completely. Lately, many studies have been done to design photocatalysts with efficient separation of photogenerated charge carriers and enhanced light absorption. Photocatalyst engineering through doping with metal and non-metal elements and the formation of heterojunction are proven effective for minimizing the recombination of electron-hole pairs and enlarging the absorption in the visible light region. This review focuses on discussing and evaluating the recent progress in the types of photocatalysts and their performance in the remediation of herbicides in wastewater. The development of innovative hybrid technologies is also highlighted. The limitations and challenges of photocatalysis technology in the present literature have been identified, and future studies are recommended.

Surface modification of TiO2/ZnO nanoparticles by organic acids with enhanced methylene blue and rhodamine B dye adsorption properties

The United Nations Organization (UNO) has revealed that approximately 2.1 billion people do not have access to treated water. Methylene blue (MB) and rhodamine B are produced as water pollutants in textile, plastic, and dye industries. In this study, oxalic acid or lactic acid surface-modification were applied to TiO₂/ZnO nanoparticles aiming to improve antibacterial and adsorption properties. The mixtures containing the corresponding acid and nanoparticles in 0.25 : 1/0.5 : 1 ratios of ZnO and TiO₂ correspondingly were subjected to ultrasonic treatment with a catenoidal ultrasonic probe coupled to a homemade ultrasonic generator with an output power of 750 W, wave amplitude of 50% and variable frequency in the range of 15-50 kHz. To verify the influence of the ultrasonic treatment, different treatment times of 30, 45, 60, and 90 min were applied. Unmodified and modified TiO₂/ZnO nanoparticles were characterized by FTIR, TGA, XRD, SEM, and XPS. From the results, obtained from the physicochemical characterization, in the ZTO90 and ZTL90 samples a greater modification was shown. The SEM images showed that a coating was present on the surface of the ceramic particles of the ZTL90 sample. The O 1s deconvolution in the XPS spectra indicates a greater presence of C[double bond, length as m-dash]O bonds in the ZTL90 sample. In parallel, the sample ZTL90 presented 85 and 89% adsorption efficiency for MB and rhodamine B dyes in a time of 12 min, and important antibacterial activity against E. coli and S. epidermis could be evidenced.

Synthesis of TiC@C-anatase/rutile@polyvinyl alcohol/xylan: a powerful photocatalyst for degradation of organic pollutant under visible light

In this study, a composite bearing titanium carbide (TiC), titanium dioxide (TiO₂), polyvinyl alcohol and xylan (TiC@C-anatase/rutile@polyvinyl alcohol/xylan) was synthesized and applied as a photocatalyst for the degradation of bromophenol blue (BPB) solution through several steps. Nanostructure of TiC and TiO₂ in the anatase and rutile phases was obtained through heat treatment of TiC at different times and temperatures (TiC@AR) which led to a reduction in energy bandgap from UV to visible light, in addition to the enhancement of the surface activity. After TiC@AR polymerization by xylan and polyvinyl alcohol and obtaining TiC@AR/PX, the energy bandgap reduced to IR range (52% of the sunlight) while showing an enhancement in the surface activity. The photocatalytic activity of the compounds was tested by studying the decomposition of BPB solution under visible light. The result illustrated the ability of TiC and TiC@AR to decrease the concentration of BPB after 150 min by 35% and 37%, respectively, while this reduction was 72% for TiC@AR/PX. Considering the effective parameters, the energy bandgap and the surface layer played key roles in photocatalytic degradation.

Elimination of amoxicillin using zeolite Y-sea salt as a good catalyst for activation of hydrogen peroxide: Investigating degradation pathway and the effect of wastewater chemistry

The sea contains elements that can play a useful role in catalyzing reactions. Therefore, this research was done to focus on eliminating amoxicillin (AMX) from wastewater utilizing zeolite Y- sea salt catalyst in the presence of H₂O₂. The influences of furnace temperature (200-500 °C) and time duration in the furnace (1-4 h) were optimized during catalyst generation. Also, the effects of different parameters on AMX removal, such as pH (5.0-9.0), catalyst dose (0-10 g.L^-1), AMX concentration (50-300 mg.L^-1), contact time (10-130 min), and H₂O₂ concentration (0-6 mL/100 mL distilled water) were investigated. Different analyses like Brunauer-Emmett-Teller (BET), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were conducted to reveal catalyst properties. The BET-specific surface area of the catalyst (12.69 m²g^-1) insignificantly (p-value > 0.05) changed after AMX removal (13.04 m²g^-1), indicating the strength of the prepared catalyst. The active groups of N-H, O-H-O, O-Si-O, C-H, Si-O-Si, and Si-O-Al were determined in the catalyst structure. The highest removal of AMX (93%) was achieved in the zeolite-sea salt/H₂O₂ system at a pH level of 6.0 and an H₂O₂ concentration of 0.1 mL/100 mL. Elimination of the AMX followed pseudo-first-order kinetics. The catalyst was reclaimed up to 7 times and the removal efficiency was suitable up to the fifth stage. The by-products and reaction pathways were investigated by gas chromatography-mass spectrometry (GC-MS). The results showed that zeolite-sea salt can be utilized as an H₂O₂ activator for the effective degradation of AMX from wastewater.

Synthesis and Characterization of Manganese-Modified Black TiO2 Nanoparticles and Their Performance Evaluation for the Photodegradation of Phenolic Compounds from Wastewater

The release of phenolic-contaminated treated palm oil mill effluent (TPOME) poses a severe threat to human and environmental health. In this work, manganese-modified black TiO₂ (Mn-B-TiO₂) was produced for the photodegradation of high concentrations of total phenolic compounds from TPOME. A modified glycerol-assisted technique was used to synthesize visible-light-sensitive black TiO₂ nanoparticles (NPs), which were then calcined at 300 °C for 60 min for conversion to anatase crystalline phase. The black TiO₂ was further modified with manganese by utilizing a wet impregnation technique. Visible light absorption, charge carrier separation, and electron–hole pair recombination suppression were all improved when the band structure of TiO₂ was tuned by producing Ti³⁺ defect states. As a result of the enhanced optical and electrical characteristics of black TiO₂ NPs, phenolic compounds were removed from TPOME at a rate of 48.17%, which is 2.6 times higher than P25 (18%). When Mn was added to black TiO₂ NPs, the Ti ion in the TiO₂ lattice was replaced by Mn, causing a large redshift of the optical absorption edges and enhanced photodegradation of phenolic compounds from TPOME. The photodegradation efficiency of phenolic compounds by Mn-B-TiO₂ improved to 60.12% from 48.17% at 0.3 wt% Mn doping concentration. The removal efficiency of phenolic compounds from TPOME diminished when Mn doping exceeded the optimum threshold (0.3 wt%). According to the findings, Mn-modified black TiO₂ NPs are the most effective, as they combine the advantages of both black TiO₂ and Mn doping.

Sonoprocessing: From Concepts to Large-Scale Reactors

Intensification of ultrasonic processes for diversified applications, including environmental remediation, extractions, food processes, and synthesis of materials, has received attention from the scientific community and industry. The mechanistic pathways involved in intensification of ultrasonic processes that include the ultrasonic generation of cavitation bubbles, radical formation upon their collapse, and the possibility of fine-tuning operating parameters for specific applications are all well documented in the literature. However, the scale-up of ultrasonic processes with large-scale sonochemical reactors for industrial applications remains a challenge. In this context, this review provides a complete overview of the current understanding of the role of operating parameters and reactor configuration on the sonochemical processes. Experimental and theoretical techniques to characterize the intensity and distribution of cavitation activity within sonoreactors are compared. Classes of laboratory and large-scale sonoreactors are reviewed, highlighting recent advances in batch and flow-through reactors. Finally, examples of large-scale sonoprocessing applications have been reviewed, discussing the major scale-up and sustainability challenges.

Sonochemical synthesis of porous gold nano- and microparticles in a Rosette cell

We report the synthesis of Au nano- and microparticles that relies on α-D-glucose (C6H12O6) as the reducer and stabilizer in a Rosette cell under 20 kHz ultrasound irradiation. The chemical and physical effects of ultrasonic irradiation on the synthesis were investigated. The results showed that an optimum pH is required for the formation of insoluble Au(0) particles. Upon irradiation, low pH yielded Au nanoparticles while high pH resulted in microparticles. The Au surface capping by α-D-glucose hydroxyl and carbonyl groups was confirmed by Fourier transform infrared (FT-IR) spectroscopy. X-ray diffraction (XRD) analysis indicated that the Au particles crystallize within the face-centered-cubic (FCC) cell lattice. Moreover, continuous sonication reduced larger amounts of the Au precursor compared to the intermittent mode. Furthermore, tuning sonication time and mode influences the particle size and porosity as characterized by scanning and transmission electron microscopy. Our results shed a new light into the importance of the experimental and ultrasound parameters in obtaining Au particles of desired features through sonochemistry.

Amidoxime modified polymers of intrinsic microporosity/alginate composite hydrogel beads for efficient adsorption of cationic dyes from aqueous solution

Polymers of intrinsic microporosity (PIM-1) has demonstrated great potential in adsorption and separation fields. In this study, PIM-1 was structured into an applicable and efficient adsorbent using a facile way. PIM-1 was first modified by amidoxime, and then the amidoxime modified PIM-1 (AOPIM-1) was mingled into alginate (Alg) hydrogel to obtain composite hydrogel beads. The AOPIM-1/Alg composite beads were further employed for removal of malachite green (MG) from aqueous solution and the effects of doped ratio, adsorbent dosage, contact time, and initial dye concentration on the MG adsorption performance were systematically investigated. The MG adsorption capacity of pure Alg beads was substantially enhanced after incorporating AOPIM-1. Furthermore, isothermal, kinetic and thermodynamic studies were performed to explore the fundamental adsorption behavior. Both Freundlich isotherm and Langmuir isotherm models can fit the adsorption isotherm data well, and the adsorption kinetics is well described by Pseudo-second-order. The adsorption process is feasible, spontaneous and endothermic. In addition, mixed dyes adsorption measurements indicate that AOPIM-1/Alg beads are highly selective to adsorb cationic dyes from anionic/cationic mixed dyes solution. The regeneration test shows that above 90% of the adsorption capacity of the composite beads can be maintained after 10 cycles of MG adsorption/desorption. These findings point that AOPIM-1/Alg composite hydrogel beads are an efficient, up-and-coming and recyclable adsorbent for cationic dyes adsorption from aqueous solution.

Insight into the inhibitory mechanism of soluble ionic liquids on the transport of TiO2 nanoparticles in saturated porous media: Roles of alkyl chain lengths and counteranion types

Column experiments were carried out to investigate the transport of TiO₂ nanoparticles (nTiO₂) in water-saturated porous media in the presence of various imidazolium-based ionic liquids (ILs) with different alkyl chain lengths and counteranions. The results indicated that the effects of ILs on nTiO₂ transport were considerably dependent upon IL species. In general, the transport-inhibition effects increased with the increasing length of branched alkyl chain on the ILs (i.e., [C₆mim]Cl > [C₄mim]Cl > [C₂mim]Cl). The trend was dominated by the hydrophobicity effects of ILs. Meanwhile, the inhibitory effects of ILs were strongly related to the counteranions and followed the order of [C₄mim]Cl > [C₄mim][TOS] > [C₄mim][PF₆], mainly due to different electrostatic repulsion force between nanoparticles and porous media in the presence of various ILs. Furthermore, the inhibitory role of [C₄mim][TOS] in nTiO₂ transport under acidic conditions (i.e., pH 6.5) was greater than that under alkaline conditions (i.e., pH 8.0). The dominant mechanism was that the differences in the extent of electrostatic repulsion between sand grains and nTiO₂ with or without ILs at pH 6.5 were larger than that at pH 8.0. Moreover, two-site kinetic retention model and DLVO theory provided good descriptions for the transport behaviors of nTiO₂ with different ILs.

Removal of amoxicillin from wastewater in the presence of H2O2 using modified zeolite Y- MgO catalyst: An optimization study

In this paper, Zeolite-MgO was generated using alkali-thermal method and was utilized as a catalyst to decrease amoxicillin (AMX) concentration in the presence of H₂O₂ from wastewater. Different tests like Fourier-transform infrared (FTIR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy-energy dispersive X-ray analysis (FESEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were done to determine catalyst properties. Active groups of C-S-C, CO, CC, C-N, C-O, N-O, and N-H were identified in catalyst frame. According to XRD results, lower crystallinity of nanoparticles after modification of zeolite by MgO can lead to improvement of AMX removal. Active surface of zeolite (2.32 m²/g) was increased after optimization by MgO to 2.96 m²/g, indicating an increase in the catalyst capacity for activation of H₂O₂. In addition, furnace temperature (200-500 °C), residence time in the furnace (1-4 h), and Mg(NO₃)₂: zeolite ratio (0.25: 2, 0.5:2, 1:2 w/w) were studied to achieve the optimized catalyst for AMX removal. Different parameters like pH (5-9), H₂O₂ concentration (0-6 mL/100 mL), dose of catalyst (0-10 g/L), AMX concentration (50-300 mg/L), and reaction time (10-130 min) were also studied. The best efficiency (97.9%) of AMX removal was achieved at acidic pH with the lowest amount of H₂O₂ (0.1 mL/100 mL) and 7 g/L of catalyst. AMX removal using the developed process followed pseudo-first-order kinetics. Reclaimable Zeolite-MgO catalyst can be effectively utilized in wastewater works.

Visible-light-driven photocatalytic disinfection of raw surface waters (300-5000 CFU/mL) using reusable coated Ru/WO3/ZrO2

We selected ruthenium (Ru) to improve the photocatalytic activity of a WO₃/ZrO₂ composite. The synthesized Ru/WO₃/ZrO₂ was then compared to a benchmark photocatalyst (S-TiO₂) in terms of photocatalytic disinfection of raw surface waters collected from the Nile Delta region, Egypt. The photocatalysts were immobilized on aluminum plates with polysiloxane to test them in repetitive cycles under the irradiation of a metal-halide lamp. Bacterial concentrations in the raw waters ranged from 300 to 5000 CFU/mL (CFU: colony-forming units) and different species and genus were detected including gram-negative (e.g., shigella, salmonella, vibrio parahaemolyticus, and vibrio cholera) and gram-positive bacteria (e.g., enterococcus). Ru/WO₃/ZrO₂ deactivated over 90 % of the bacterial content within 120 min for most sources, whereas S-TiO₂ did not perform as highly. The bacterial count after 240 min of irradiation was below the detection limit for all different water sources. Moreover, the inhabitation of photocatalytic disinfection by natural organic matter (NOM) was investigated. Ru/WO₃/ZrO₂ was stable for four continuous cycles (960 min in total), suggesting the viability for practical application.

Waste sludge from shipping docks as a catalyst to remove amoxicillin in water with hydrogen peroxide and ultrasound

The waste sludge from shipping docks contains important elements that can be used as a catalyst after proper processing. The purpose of this study was to remove of amoxicillin (AMX) from the aquatic environment using waste sludge from shipping docks as catalyst in the presence of hydrogen peroxide/ultrasound waves. The catalyst was produced by treating waste sludge at 400 °C for 2 h. N₂ adsorption, SEM, XRD, XRF, and FTIR techniques characterized the structural and physical properties of the catalyst. The BET-specific surface area of the catalyst reduced after AMX removal from 4.4 m²/g to 3.6 m²/g. To determine the optimal removal conditions, the parameters of the design of experiments were pH (5-9), contaminant concentration (5-100 mg/L), catalyst dosage (0.5-6 g/L), and concentration of hydrogen peroxide (10-100 mM). The maximum removal of AMX (98%) was obtained in the catalyst/hydrogen peroxide/ultrasound system at pH 5, catalyst dose of 4.5 g/L, H₂O₂ concentration of 50 mM, AMX concentration of 5 mg/L, and contact time of 60 min. The kinetics of removal of AMX from urine (k = 0.026 1/min), hospital wastewater (k = 0.021 1/min), and distilled water (k = 0.067 1/min) followed a first-order kinetic model (R²>0.91). The catalyst was reused up to 8 times and the AMX removal decreased to 45% in the last use. The byproducts and reaction pathway of AMX degradation were also investigated. The results clearly show that to achieve high pollutant removal rate the H₂O₂/ultrasound and catalyst/ultrasound synergy plays a key role.

The Sonophotocatalytic Degradation of Pharmaceuticals in Water by MnOx-TiO2 Systems with Tuned Band-Gaps

Advanced oxidation processes (AOPs) are technologies to degrade organic pollutants to carbon dioxide and water with an eco-friendly approach to form reactive hydroxyl radicals. Photocatalysis is an AOP whereby TiO2 is the most adopted photocatalyst. However, TiO2 features a wide (3.2 eV) and fast electron-hole recombination. When Mn is embedded in TiO2, it shifts the absorption wavelength towards the visible region of light, making it active for natural light applications. We present a systematic study of how the textural and optical properties of Mn-doped TiO2 vary with ultrasound applied during synthesis. We varied ultrasound power, pulse length, and power density (by changing the amount of solvent). Ultrasound produced mesoporous MnOx-TiO2 powders with a higher surface area (101–158 m2 g−1), pore volume (0-13–0.29 cc g−1), and smaller particle size (4–10 µm) than those obtained with a conventional sol-gel method (48–129 m2 g−1, 0.14–0.21 cc g−1, 181 µm, respectively). Surprisingly, the catalysts obtained with ultrasound had a content of brookite that was at least 28%, while the traditional sol-gel samples only had 7%. The samples synthesized with ultrasound had a wider distribution of the band-gaps, in the 1.6–1.91 eV range, while traditional ones ranged from 1.72 eV to 1.8 eV. We tested activity in the sonophotocatalytic degradation of two model pollutants (amoxicillin and acetaminophen). The catalysts synthesized with ultrasound were up to 50% more active than the traditional samples.

Solvothermal synthesis of WO3 /TiO2 /carbon fiber composite photocatalysts for enhanced performance under sunlight illumination

Carbon fiber (CF)-based WO₃ /TiO₂ composite catalysts (WO₃ /TiO₂ /CF) were successfully synthesized by solvothermal method. The catalysts were characterized by XPS, SEM, BET, XRD, FTIR, Raman and UV-Vis. The analyses confirmed the WO₃ /TiO₂ nanoparticles with high crystallinity deposited on the carbon structure. The photocatalytic degradation of Orange II azo dye under UV and sunlight illumination with the synthesized catalyst was explored. The composite catalyst displayed high performance (85%) for Orange II degradation while that of for WO₃ /TiO₂ was found as 76%. The effects of CF amount, solution pH, initial dye concentration and catalyst dose on photocatalytic performance were studied. It was found that the degradation efficiency increased from 68% to 90% with the increasing CF amount from 3 wt% to 5 wt%, while the further increase in CF amount (7-10 wt%) decreased the photodegradation due to the blocking the active sites of WO₃ /TiO₂ . The enhanced photocatalytic efficiency was mainly attributed to the electrical properties of the CF and reduced bandgap.

An ultrasound-assisted photocatalytic treatment to remove an herbicidal pollutant from wastewaters

Pollutants of emerging concern contaminate surface and ground water. Advanced oxidation processes treat these molecules and degrade them into smaller compounds or mineralization products. However, little information on coupled advanced oxidation techniques and on the degradation pathways of these pollutants is available to identify possible ecotoxic subproducts. In the present work, we investigate the ultrasound assisted photocatalytic degradation pathway of the herbicide Isoproturon. We worked in batch mode in a thermostatic glass reactor. We compared the activity of nanometric TiO₂ P25 with that of Kronos 1077, a micrometric TiO₂. We discuss the individual, additive and synergistic degradation action of photolysis, sonolysis, sonophotolysis, and sonophotocatalysis by varying catalyst loading and/or ultrasound power for the last three techniques. With 0.1 g L^-1 catalyst, photocatalysis and sonophotopcatalysis completely degrade Isoproturon within 240 min and 60 min, respectively (>99% conversion). Sonophotocatalysis breaks Isoproturon down into smaller molecules than photocatalysis alone.

Lithium carbonate recovery from lithium-containing solution by ultrasound assisted precipitation

Lithium carbonate (Li₂CO₃), one of the most important lithium compounds, is usually prepared from lithium-containing solution. The lithium recovery rate and the purity of Li₂CO₃ are highly dependent on the lithium concentration. In order to get a high lithium recovery rate, high concentrated lithium-containing solution is required, while the purity of Li₂CO₃ can be low remaining a significant amount of impurities. Usually, it is not possible to obtain high purity Li₂CO₃ by single-step precipitation with a relatively high lithium recovery rate especially from a low concentrated lithium-containing solution. In this research, ultrasound is introduced to increase lithium recovery rate and prepare industrial grade Li₂CO₃. The research found that ultrasound can significantly reduce the polymerization of Li₂CO₃ crystal particles and promote dissociation of impurity ions. At the same time, ultrasound accelerates the nucleation process of Li₂CO₃ and boosts lithium recovery rate because of cavitation. The different parameters during the Li₂CO₃ precipitation process were systematically discussed. Under the optimized conditions, the lithium recovery rate can be increased by 12% with a global lithium recovery rate of 97.4%. Li₂CO₃ with a purity higher than industrial grade can be obtained by one-step precipitation. It demonstrates a potential pathway for effective lithium recovery from low concentrated lithium-containing solution and preparation of industrial grade Li₂CO₃.

Ultrasound to improve both synthesis and pollutants degradation based on metal nanoparticles supported on TiO2

Sonochemistry is based on acoustic cavitation, which consist in the formation, growth, and implosive collapse of bubbles within a liquid. Collapsing bubbles generate localized hot spots, characterized by temperatures up to 5000 K and pressures up to 1800 atm. These extreme conditions allow producing a variety of nanostructured and amorphous materials, as well as they are advantageous for chemical processes. Ultrasound requires inexpensive equipment and fewer steps than conventional methods. Combining ultrasound and photocatalysis enhances the performance of the processes, reduces reaction time, avoids the use of extreme physical conditions and improves the photocatalytic materials properties increasing their activity. Here, we reported the positive effect of US in synthesizing Me-modified TiO₂ (Me = Ag, Cu, Mn) for pollutants degradation in gas-phase; also, we proved the advantageous application of ultrasound for the photocatalytic removal of organic compounds in water. Ultrasound produced more efficient Me-doped TiO₂, which showed higher activity in visible light. When combined with photocatalytic water treatment, the organic compounds degradation and mineralization increases.

Ultrasound-assisted impregnation for high temperature Fischer-Tropsch catalysts

A fraction of the petroleum extracted from oil reservoirs contains associated natural gas. Rather than building infrastructure to recover low volumes of this natural gas, the industry flares or vents it to the atmosphere, which contributes to atmospheric greenhouse gas emissions but also reduces the air quality locally because it contains gaseous sulphur and nitrogen compounds. Converting the natural gas (NG) to hydrocarbons with a small-scale two-step gas-to-liquids process, is an alternative to flaring and venting. In the first step, NG reacts with oxygen to form syngas (Catalytic Partial Oxidation) and in the second step the syngas reacts over metallic catalysts to form higher paraffins at 210 °C to 300 °C-Fischer Tropsch synthesis (FT). For the first time, we synthesize bimetallic FeCo FT catalysts with ultrasound. An ultrasonic horn agitates the solution during the entire impregnation process. The active phase dispersion of the sonicated catalysts was superior to the catalyst synthesized without ultrasound, while reducing the impregnation time by a factor of three. We tested our catalysts in a lab-scale, fixed-bed reactor at 270 °C and 300 °C, and achieved 80% conversion over 3-days on stream and a 40% yield of C₂₊.