Mineralization of dinitrotoluenes in aqueous solution by sono-activated persulfate enhanced with electrolytes

Long-Term Stable Dispersion of Multiwalled Carbon Nanotubes by Peroxydisulfate upon Ultrasonication Activation

Poor dispersibility of carbon nanotubes greatly hinders their practical applications. Herein, a long-term stable dispersion of multiwalled carbon nanotubes (MWCNTs) in peroxydisulfate (PDS) is achieved. MWCNTs at 40 mg L-1 are completely dispersed by PDS upon ultrasonication (US/PDS) within 64 min and a stable dispersion is maintained at least 20 days. Mechanistically, US created defects on the nanomaterial and PDS-origin free radicals attacked these defects to introduce O-containing moieties (─OH and ─COOH). Interestingly, dispersion efficiency of MWCNTs by US/PDS initially at pH 7 and 3.8 is comparable, but lower than that initially at pH 12. Both •OH and SO4 •- are produced under alkaline condition, while SO4 •- is the dominant free radicals initially at pH 7 and 3.8 during the whole dispersion period. Stronger dispersion of MWCNTs initially at pH 12 resulted from greater amounts of O-containing moieties mainly in ─OH (46.32%) rather than ─COOH (24.19%) form. This differential more strongly promotes MWCNTs-water interaction via hydrogen bonding, thereby enhancing the dispersion. Notably, no significant mass loss of MWCNTs occurred during dispersion. Overall, the developed method achieves long-term stable dispersion of MWCNTs in a manner that can significantly extend their applications.

Research Progress on the Degradation of Organic Pollutants in Wastewater via Ultrasound/Periodate Systems: A Review

In recent years, the efficient removal of organic pollutants from wastewater has emerged as a critical area of global research interest. Against this backdrop, an array of innovative technologies for wastewater treatment has been developed. Among numerous advanced oxidation processes (AOPs), periodate (PI), an emerging oxidizing agent in AOPs, has garnered significant attention from researchers. Particularly, the integration of ultrasound (US)-activated PI systems has been recognized as an exceptionally promising approach for the synergistic degradation of organic pollutants in wastewater. In this paper, we conducted a thorough analysis of the mechanisms underlying the degradation of organic pollutants using the US/PI system. Furthermore, we comprehensively delineated the effects of ultrasonic power, periodate concentration, temperature, pH, coexisting inorganic ions, and dissolved organic matter on the removal efficiency of organic pollutants and summarized application cases of the US/PI system for the degradation of different pollutants. Finally, we also offered prospective discussions on the future trajectories of US/PI technology development.

Natural mineral-derived Fe/Mn-BC as efficient peroxydisulfate activator for 2,4-dichlorophenol removal from wastewater: Performance and sustainable catalytic mechanism

Iron and manganese oxides/biochar composite materials (Fe/Mn-BC) are promising catalysts in the field of advanced oxidation. High purity chemical reagents are popular precursors for preparing Fe/Mn-BC, while the potential of low-cost natural minerals as precursors has been neglected. In this study, high-efficiency Fe/Mn-BC was synthesized by one-step pyrolysis method using hematite, phosphoromanganese, and bagasse. The synthesized Fe/Mn-BC removed 83.7% 2, 4-dichlorophenol (2, 4-DCP) within 30 min, about 8.8 and 10.6 times better than biochar (BC) and Fe/Mn complex, respectively. The removal of 2, 4-DCP in the Fe/Mn-BC + peroxydisulfate (PDS) system was influenced by catalyst dosage, PDS concentration, initial pH, organic acids, and chromium. Sulfate radical (SO₄^•-) and hydroxyl radicals (•OH) generated by Fe/Mn-BC-activated PDS have similar contribution to the degradation of 2,4-DCP. A possible removal mechanism of 2, 4-DCP in the Fe/Mn-BC + PDS system was proposed based on Electron Spin Resonance spectroscopy, free radical quenching experiments, X-ray photoelectron spectroscopy, X-ray diffraction, and electrochemical measurement. Fe⁰ and Fe(II) in Fe/Mn-BC play significant role in catalytic degradation of 2, 4-DCP at the early stage of the reaction (within 0-5 min). Then, the interaction between Mn and BC or structural Mn and structural Fe gradually became dominant in the later stage. Similarly, the electron transfer promoted by biochar also played an important role in this catalysis. This discovery provided a new strategy for developing iron and manganese oxides/biochar composite materials to activate PDS for the elimination of refractory organic pollutants.

Ultrasound-Assisted Mineralization of 2,4-Dinitrotoluene in Industrial Wastewater Using Persulfate Coupled with Semiconductors

Oxidative degradation of 2,4-dinitrotoluenes in aqueous solution was executed using persulfate combined with semiconductors motivated by ultrasound (probe type, 20 kHz). Batch-mode experiments were performed to elucidate the effects of diverse operation variables on the sono-catalytic performance, including the ultrasonic power intensity, dosage of persulfate anions, and semiconductors. Owing to pronounced scavenging behaviors caused by benzene, ethanol, and methanol, the chief oxidants were presumed to be sulfate radicals which originated from persulfate anions, motivated via either the ultrasound or sono-catalysis of semiconductors. With regard to semiconductors, the increment of 2,4-dinitrotoluene removal efficiency was inversely proportional to the band gap energy of semiconductors. Based on the outcomes indicated in a gas chromatograph-mass spectrometer, it was sensibly postulated that the preliminary step for 2,4-dinitrotoluene removal was denitrated into o-mononitrotoluene or p-mononitrotoluene, followed by decarboxylation to nitrobenzene. Subsequently, nitrobenzene was decomposed to hydroxycyclohexadienyl radicals and converted into 2-nitrophenol, 3-nitrophenol, and 4-nitrophenol individually. Nitrophenol compounds with the cleavage of nitro groups synthesized phenol, which was sequentially transformed into hydroquinone and p-benzoquinone.

Yolk-shell Co3 O4 @Fe3 O4 /C Nanocomposites as a Heterogeneous Fenton-like Catalyst for Organic Dye Removal

The yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites with Co₃ O₄ as the core, Fe₃ O₄ /C as the shell, and a cavity structure were synthesized by the hard template method. The physical and chemical properties of the composites were characterized by SEM, TEM, XRD, TGA, XPS, BET, and VSM. The specific surface area of yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites is 175.9 m²  g^-1 , showing superparamagnetic properties. The yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites were used as heterogeneous Fenton catalysts to activate peroxymonosulfate (PMS) to degrade MB, which showed high catalytic degradation performance. The degradation rate of MB reached 100 % within 30 min under the circumstances of the yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites dosage of 0.1 g L^-1 , the PMS dosage of 1.0 g L^-1 , the initial MB concentration of 100 mg L^-1 , an initial pH of 5.5, and a temperature of 30±2 °C. The enhanced catalytic performance of the yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites can be attributed to the synergistic effect of the two catalytically active materials and the middle cavity. The effects of different operating parameters and co-existing anion species on MB degradation were also investigated. Electron paramagnetic resonance (EPR) analysis and quenching experiments confirmed that the formation of SO₄ ⋅^- in the yolk-shell Co₃ O₄ @Fe₃ O₄ /C/PMS system contributes to MB degradation. In addition, yolk-shell Co₃ O₄ @Fe₃ O₄ /C nanocomposites can be easily separated from the pollutant solution under the action of an external magnetic field, and the degradation rate of MB can still reach 98 % after five cycles, indicating that it has good stability and reusability and has broad application prospects in the field of water purification.

In-situ photothermal activation of peroxydisulfate in a carbon nanotubes membrane-based flow-by reactor toward degradation of contaminants

The energy-induced peroxydisulfate (PDS) activation is a green and effective approach for pollutant degradation, while the huge energy consumption would significantly increase the cost of wastewater treatment. In this study, by taking carbon nanotubes (CNTs) membrane as the light to heat (LTH) conversion materials, we developed a photothermal PDS activation process for degradation of organic contaminants in a flow-by reactor, with hydroxyl radicals (^•OH) and sulfate radicals (SO₄^•-) as the main reactive species. This system has excellent in-situ LTH conversion performance and heat transfer ability. As a result, various pollutants are degraded with an efficiency higher than 90%. More importantly, the LTH device exhibits satisfying stability and could be used for pollutant (i.e., methyl orange (MO)) removal under solar irradiation. In addition, some important factors (i.e., irradiation distance, residence time, solution pH, and PDS dosage) that might significantly influence the removal efficiency of pollutants are optimized. This work provides a novel perspective for the activation of PDS via CNTs as photothermal materials for pollutant degradation with a flow-by reactor.

Mechanistic insights into promoted dewaterability, drying behaviors and methane-producing potential of waste activated sludge by Fe2+-activated persulfate oxidation

Sludge management represents a critical challenge because of complex compositions and poor dewaterability. Fe²⁺-activated persulfate oxidation (Fe²⁺/S₂O₈^2-) is an effective, and widely investigated method for enhancing sludge dewatering. However, the potential effects of Fe²⁺/S₂O₈^2- on sludge drying efficiency, anaerobic biodegradation behaviors and potential recycling of sludge residua are not yet well-known. In this study, a new sludge disposal route (step i: enhanced dewatering via Fe²⁺/S₂O₈^2-, and step ii: drying-incineration or anaerobic digestion) was proposed and appraised comprehensively. Results showed that Fe²⁺/S₂O₈^2- oxidation destroyed extracellular polymeric substances, lysed sludge cells and enhanced the dewaterability greatly. Capillary suction time and mechanical filtration time at 2.0/1.6 mmol-Fe²⁺/S₂O₈^2-/g-VS decreased by 88.0% and 79.6%, respectively. Moreover, 89.8% of micro-pollutants (e.g., methylbenzene, ethylbenzene, p-m-xylene and o-xylene) in sludge were removed. Besides, the pretreatment was able to alter sludge drying behaviors and methane-producing potential. Pretreated sludge exhibited faster drying rate and shorter lag-time for methane production. Incineration residua of dewatered sludge could be re-coupled with S₂O₈^2- as the conditioner to enhance sludge dewaterability, thereby reducing the chemical input and disposal cost. This study provides a novel, self-sustainable strategy for sludge management, reutilization and final safe disposal.

Different activation methods in sulfate radical-based oxidation for organic pollutants degradation: Catalytic mechanism and toxicity assessment of degradation intermediates

With the continuous development of industrialization, a growing number of refractory organic pollutants are released into the environment. These contaminants could cause serious risks to the human health and wildlife, therefore their degradation and mineralization is very critical and urgent. Recently sulfate radical-based advanced oxidation technology has been widely applied to organic pollutants treatment due to its high efficiency and eco-friendly nature. This review comprehensively summarizes different methods for persulfate (PS) and peroxymonosulfate (PMS) activation including ultraviolet light, ultrasonic, electrochemical, heat, radiation and alkali. The reactive oxygen species identification and mechanisms of PS/PMS activation by different approaches are discussed. In addition, this paper summarized the toxicity of degradation intermediates through bioassays and Ecological Structure Activity Relationships (ECOSAR) program prediction and the formation of toxic bromated disinfection byproducts (Br-DBPs) and carcinogenic bromate (BrO₃^-) in the presence of Br^-. The detoxification and mineralization of target pollutants induced by different reactive oxygen species are also analyzed. Finally, perspectives of potential future research and applications on sulfate radical-based advanced oxidation technology in the treatment of organic pollutants are proposed.

Generation mechanisms of active free radicals during ciprofloxacin degradation in the ultrasonic/K2S2O8 system

Ciprofloxacin (CIP) removal efficiency in aqueous solutions in the ultrasonic (US), K₂S₂O₈, and US/K₂S₂O₈ systems was investigated. The free radical generation and action ratio were studied based on variations of K₂S₂O₈ concentration, ultrasonic power, pH, and the addition of isopropanol (ISP) or tert-butyl alcohol (TBA) in the US/K₂S₂O₈ system. The results showed that under conditions of 20 mg·L^-1 CIP concentration, 20 mmol·L^-1 K₂S₂O₈ concentration, an ultrasonic power of 360 W and pH = 7, CIP removal efficiency in the US/K₂S₂O₈ system was 92.20% after 180 min. The reaction in the US/K₂S₂O₈ system was explicitly divided into two stages: free radical generation and pollutants degradation. The ultrasonic and chain reaction facilitated enhanced generation of SO₄^-• and HO^•. The presence of K₂S₂O₈ can promote HO^• generation and K₂S₂O₈ concentration also exerted a significant effect on SO₄^-• generation, however, high concentrations were not beneficial to the reaction. Quenching reactions occurred under high concentrations of HO^• and SO₄^-•. During the initial stage of the reaction, HO^• played a more prominent role than SO₄^-•, however, the role of SO₄^-• gradually increased as the reaction proceeded and eventually surpassed HO^•.

Persulfate enhanced electrochemical oxidation of highly toxic cyanide-containing organic wastewater using boron-doped diamond anode

Cyanide-containing organic wastewater is discharged in large quantities by coking, electroplating and pharmaceutical industries, which seriously endangers environmental safety and human health. In this paper, Electrochemical Oxidation-Persulfate (EO-PS) Advanced Oxidation Process (AOP) was firstly used to treat high concentration cyanide-containing organic wastewater obtained from a chemical enterprise. The potential application of this process in the treatment of high concentration cyanide-containing organic wastewater was explored for the first time, and the effects of current density, initial pH, temperature and initial concentration on chemical oxygen demand (COD), total organic carbon (TOC) and total cyanide (CN^-) removal in wastewater were systematically investigated. The results shown that the EO-PS process had an excellent removal effect on organics and cyanide in high concentration cyanide-containing organic wastewater which contained 11,290 mg L^-1 COD, 4456 mg L^-1 TOC and 1280.15 mg L^-1 CN^-. The COD, TOC and CN^- removal at optimized operating parameters for 24 h were 95.8%, 87.8% and 98.4%, respectively. The corresponding electrical energy per order was only 41.6 kWh m^-3 order^-1. In addition, the pollutants removal can be accelerated under conditions of high current density, acidic solution, appropriate temperature and low pollutant concentration, among which low current density, low pH, appropriate temperature and low pollutant concentration can effectively diminish energy consumption. Cyanide, COD and TOC degradation in all reaction conditions followed the pseudo-first-order kinetic model.

Degradation of furfural in aqueous solution using activated persulfate and peroxymonosulfate by ultrasound irradiation

Furfural is a toxic compound that can cause many problems for human health and the environment. In this study, we addressed the degradation of furfural in aqueous solution using the activated persulfate (SPS) and peroxymonosulfate (PMS) through the ultrasonic (US) wave. Besides, the effect of various parameters (pH, oxidizing dose, initial furfural concentration, US frequency, Inorganic anions concentration, and scavenger) on SPS + US (SPS/US) and PMS + US (PMS/US) processes were examined. The results showed, in order to furfural removal, the US had excellent efficiency in activating SPS and PMS, as in SPS/US and PMS/US processes, 95.3% and 58.4% of furfural (at 25 mg/L concentration) was decomposed in 90 min, respectively. The furfural degradation rate increased with increasing oxidizing dose and US frequency in both SPS/US and PMS/US processes. Considering the synergistic effect, the best removal rate has occurred in the SPS/US process. In the SPS/US and PMS/US processes, furfural removal increased at natural pH (pH 7), and the presence of inorganic anions such as NO₃^- and Cl^- had negative effects on furfural removal efficiency. Also CO₃^2- and HCO₃^- acted as a radical scavenger in the SPS/US process but these anions in the PMS/US process produced more SO₄^-° radicals, and subsequently, they increased the furfural degradation rate. The results also showed that the predominant radical in the oxidation reactions is the sulfate radical. This study showed that the SPS/US and PMS/US processes are promising methods for degrading organic pollutants in the environment.

Green synthesis and application of heterogeneous iron oxide based nanoparticles for dairy wastewater treatment by Photo-Fenton processes

The aim of this study is to investigate the efficiency of heterogeneous Photo-bio-Fenton-like process and adsorption process for phosphorus removal from wastewater. The results showed that both of these processes can reach 98 and 92% removal efficiencies phosphate (P) and Chemical Oxygen Demand (COD), respectively. The findings of kinetic and isotherm studies revealed that data of P removal highly correlated with the pseudo-second-order kinetic model and Langmuir isotherm. The quenching experiments determined that both hydroxyl radicals and sulfate radicals are key factors for the removal of contamination and the sulfate radicals were also the dominant radicals.

Green synthesis and application of heterogeneous iron oxide based nanoparticles for dairy wastewater treatment by Photo-Fenton processes

The aim of this study is to investigate the efficiency of heterogeneous Photo-bio-Fenton-like process and adsorption process for phosphorus removal from wastewater. The results showed that both of these processes can reach 98 and 92% removal efficiencies phosphate (P) and Chemical Oxygen Demand (COD), respectively. The findings of kinetic and isotherm studies revealed that data of P removal highly correlated with the pseudo-second-order kinetic model and Langmuir isotherm. The quenching experiments determined that both hydroxyl radicals and sulfate radicals are key factors for the removal of contamination and the sulfate radicals were also the dominant radicals.