Evaluation of the impact of lime softening waste disposal in natural environments

Material- and Site-Specific Partition Coefficients for Beneficial Use Assessments

Partition coefficient (K_d) values available in the literature are often used in fate and transport modeling conducted as part of beneficial use risk assessments for industrial byproducts. Because element partitioning depends on soil properties as well as characteristics of the byproduct leachate, site-specific K_d values may lead to more accurate risk assessment. In this study, contamination risk to groundwater of beneficially reused byproducts was assessed using batch leaching tests on waste to energy bottom ash and coal combustion fly ash. Leachates were equilibrated with eight different soils to obtain the waste-soil-specific K_d,exp values for the metals of interest. The K_d,exp values were used as inputs in the Industrial Waste Management Evaluation Model to demonstrate the degree to which K_d estimates affect risk assessment outcomes. Measured K_d,exp values for the most part fell within the large range of K_d values reported in the literature, but IWEM results using default K_d values for some types of soils resulted in overestimated risk compared to those derived from K_d,exp values. Modeled concentration at the receptor location was much lower for some elements for those soils with high concentrations of iron and aluminum.

Environmental assessment of utilizing date palm ash as partial replacement of cement in mortar

Saudi Arabia's date palm industry generates date palm ash (DPA) from the thermal processing of palm oil fibers and shells. This waste material has potential to be used as partial replacement of cement in structural mortar. However, no studies to date have examined its pollution potential. DPA was used as a cement replacement in Portland cement mortar (PCM) using a 10% and 100% replacement rate and then compared to an ordinary PCM control sample. Total elemental analysis, the toxicity characteristic leaching procedure (TCLP) and monolith leaching tests were conducted. Elemental analysis revealed a standard elemental profile similar to data for the comparably used wood ash. Aluminum (Al) and iron (Fe) were elements with the greatest abundance in DPA but no element exceeded regulatory thresholds. Leachability testing revealed that while concentrations of Al and Fe may appear high in DPA, they experience relatively low mobility when encapsulated in PCM matrices as indicated by their calculated leachability index. The results presented in this paper indicate that DPA poses no environmental risk to human health when used as cement replacement in PCM.