Ten-years monitoring of MSWI bottom ashes with focus on TOC development and leaching behaviour

Phosphorus speciation in sewage sludge from three municipal wastewater treatment plants in Sweden and their ashes after incineration

Given the high efficiency in phosphorus removal at municipal wastewater treatment plants (MMWWTP), sewage sludge constitutes a promising resource for phosphorus (P) recovery. Sewage sludge is, however, a complex matrix and its direct use as fertiliser is limited by its content of metals/metalloids and organic pollutants. In order to increase its usability as a potential resource of P, there is a need for increased knowledge on phosphorus speciation in these matrices. The sludge composition is highly influenced by local conditions (i.e. wastewater composition and treatment method), and it is therefore important to study sludge from several MMWWTPs. In this study, three different protocols for sequential extraction were utilised to investigate the chemical speciation of phosphorus in sludge from three different MMWWTP sludges in Sweden, as well as in corresponding ashes following incineration. The results showed that the total amounts of phosphorus ranged from 26 to 32 mg g^-1 sludge (dry weight), of which 79-94% was inorganically bound (IP). In the sludge, 21-30% of the IP was associated with calcium (Ca-P), which is the preferred species for fertiliser production. Following incineration, this fraction increased to 54-56%, mainly due to transformation of iron-associated phosphorus (Fe-P), while aluminium-associated species of phosphorus (Al-P) remained unaltered. The results from this study confirm that incineration is a suitable treatment for sewage sludge in terms of potential phosphorus recovery.

Effects of enhanced metal recovery on the recycling potential of MSWI bottom ash fractions in various legal frameworks

In recent years, complex new bottom ash treatment processes for enhanced metal recovery have been implemented in Switzerland, producing residual bottom ash fractions with various qualities. This study focusses on three different treatment processes by characterizing all arising fractions in detail. Thereby the factors influencing the composition of these fractions are identified and their recycling potential in Switzerland is investigated. However, high legislative requirements on total contents of heavy metals represent a high barrier for bottom ash recycling in Switzerland. Therefore, the recycling potential is further evaluated based on the waste legislation applied in the Netherlands, where recycling of bottom ash has a long tradition. There, threshold values for bottom ash recycling are based on leachate concentrations and not on total contents as in Switzerland. However, Swiss Waste Legislation also knows threshold values based on leachate concentrations for certain waste materials. The leaching tests applied in these two countries, however, are different. The comparison of both leaching tests reveals that the setup and conditions, especially the considered pH range, significantly influence the leaching of heavy metals. With emphasis on problematic pollutants, the possibilities for new applications of these fractions are evaluated based on Swiss and Dutch legal threshold values. The comparison within the legal frameworks of these two countries allows recognizing opportunities and risks related to bottom ash recycling.

Dataset on ten-years monitoring of MSWI bottom ashes in six MSWI plants in the Canton of Zürich, Switzerland

The dataset presented in this article is the supplementary data for the research article “Ten-years monitoring of MSWI bottom ashes with focus on TOC development and leaching behaviour” (https://doi.org/10.1016/j.wasman.2020.07.038) by Glauser et al. (2020) [1]. From 2008–2018 bottom ashes have been monitored in six MSWI plants in the Canton of Zürich with regular sampling campaigns and analysis of important species defined in the Swiss Waste Legislation [2]. Both the size of the dataset and the long period of consistent and representative monitoring are unique for Switzerland. Relevant aspects of the monitoring data are discussed and interpreted in the above mentioned research article and complemented by simple emission forecast modelling. While only selected species were discussed in the research article, this data article covers all the monitoring data. The focus of the monitoring was laid on carbon-species with the analysis of total carbon (TC), total organic carbon (TOC), total inorganic carbon (TIC), degradable organic carbon (OC) and elemental carbon (EC). Total contents of nitrogen (N), sulphur (S), phosphorus (P), selected heavy metals (As, Cd, Cr, Cu, Ni, Pb, Sb and Zn) and loss on ignition (LOI) complete the solid chemical analysis. In addition, particulate ferrous (Fe) and non-ferrous (NF) metals and unburnt material were determined manually. Batch eluate tests according to Swiss Waste Legislation [3] were performed and analysed for dissolved organic carbon (DOC), ammonium (NH₄⁺), nitrite (NO₂⁻), fluoride (F⁻), sulphite (SO₃²⁻), sulphide (S₂⁻), chromate Cr(IV) and the heavy metals Cu (aq) and Zn (aq) and Cr(IV). In addition, data on the biochemical oxygen demand (BOD) and the physical parameters pH and electrical conductivity complete the eluate analysis.