Phosphorus recycling from waste activated sludge using the hydrothermal platform: Recovery, solubility and phytoavailability

Efficient reclamation of phosphorus from wetland biomass waste via liquid-recirculated hydrothermal carbonization and precipitation

Hydrothermal carbonization (HTC) for the recovery of phosphorus (P) from biomass wastes has attracted considerable attention, while migration of P to the liquid phase greatly weakened P recovery efficiency and elevated the environmental risk. Therefore, a systematic scheme was proposed in this work to accomplish the complete reclamation of P from wetland plant (Ceratophyllum demersum) through coupling liquid-recirculated HTC mediated by H2O or H2SO4 with precipitation, and the migration and speciation of P during this process was determined by P K-edge X-ray absorption near edge structure, 31P nuclear magnetic resonance, and the modified sequential extraction. The P concentration in the liquid phase increased with the recirculation of HTC process water, and reached up to 550.6 mg L-1. >98.1 % of P in the recirculated liquid products was recovered in the forms of hydroxyapatite and struvite with the HTC mediums of H2O and H2SO4, respectively, without the addition of exogenous metals. In addition to the production of P compounds, P-enriched hydrochar was simultaneously obtained during this process. The HTC medium and liquid recirculation had profound impact on the hydrochar characteristics and the transformation of P. Hydroxyapatite and magnesium phosphate were the dominant P species in the hydrochars derived from H2O-mediated HTC, while FePO4 and other Ca-P species [Ca3(PO4)2 and Ca(H2PO4)2] dominated the P compounds in the H2SO4-mediated hydrochar. These results suggest that coupling liquid-recirculated HTC and precipitation could be a promising strategy for P reclamation, which could provide new insights into the P recovery from biomass waste.

Combined effect of thermal hydrolysis process and low-temperature pyrolysis on the classification and bioavailability of phosphorus in sewage sludge

Existing phosphorus (P) resources are becoming increasingly scarce, so it is necessary to recover P from potential sources. This paper is based on thermal hydrolysis process (THP) at 140-180 °C, coupled with low-temperature pyrolysis at 300 °C, to study its effect on the recovery and conversion of P from sewage sludge. Most significant change was observed in apatite P, which increased from 3.43 ± 0.48 mg/g in raw sludge to 30.17 ± 1.17 mg/g in biochar (BTHP-180-4-300) during optimal process (THP condition: 180 °C, 4 h; pyrolysis condition: 300 °C). Reactions between phosphates and metal ions became more complete during this combined process. Unstable forms of P were converted into more stable forms, with transformations from Al-P and Fe-P toward Ca-P compounds like Ca3(PO4)2, Ca3Mg3(PO4)4, Ca2P2O7, and Ca(H2PO4)2, making P less degradable and more suitable as slow-release fertilizers. Additionally, P characteristics of actual THP in a sewage treatment plant were similar to those of laboratory THP.

Effective stabilization of heavy metals in solid waste and sludge pyrolysis using intercalated-exfoliated modified vermiculite: Experiment and simulation study

Pyrolysis is effective in reducing the volume of solid waste and sludge, and produces less pollutants than incineration and landfill, but the process still suffers from heavy metal pollution. Four types of intercalated-exfoliated modified vermiculite (UIV, DIV, TIV and 3IV) were prepared using urea, dimethylsulfoxide, tributyl phosphate and 3-aminopropyltriethoxysilane as intercalators for the control of Cd, Cr, Cu, Pb and Zn in municipal sewage sludge (MSL), paper mill sludge (PML), municipal domestic waste (MWA) and aged refuse (AFE). The larger the interlayer spacing of the vermiculite, the more favorable the retention of heavy metals. 3IV was the most effective additive, with an average retention of more than 75 % of all heavy metals at 450 ℃ for the four raw materials. Cr, Cu, Pb and Zn were all at low potential ecological risk (Pr), while Cd was moderate or considerable Pr, and the addition of 3IV reduced the Pr. Distribution of intercalators between vermiculite interlayers was haphazard, and interlayer spacing results were close to those of the experiment (except for tributyl phosphate). The reactive electrons mainly flowed from the Highest Occupied Molecular Orbital (HOMO) of vermiculite flakes to the Lower Unoccupied Molecular Orbital (LUMO) of heavy metal chlorides. In contrast, the reactive electrons mostly flowed from the HOMO of heavy metal oxides to the LUMO of vermiculite flakes. Heavy metal oxides were more readily adsorbed on vermiculite flakes than heavy metal chlorides, and the adsorption capacity of Cr and Zn was stronger than that of Cd, Pb and Cu.