Field-analysis of potable water quality and ozone efficiency in ozone-assisted biological filtration systems for surface water treatment

Molecular insights towards changing behaviors of organic matter in a full-scale water treatment plant using FTICR-MS

The changing behavior of organic matter in a full-scale water treatment process was characterized based on the three-dimensional excitation-emission matrix (3D-EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). Polyaluminum chloride (PAC) as a coagulant can help to effectively remove soluble microbial by-products-like and aromatic protein-like substances during coagulation and sedimentation, corresponding to tannin and coagulated aromatic regions. The leakage of soluble microbial products during sand filtration resulted in an increase in the intensity of biomass-like regions. Nitrogen-containing compounds have higher weighted average value of double bond equivalents (DBE_w) and the modified aromaticity index (AI_mod-w) than nitrogen-free compounds. Water treatment can preferentially remove unsaturated nitrogen-containing compounds with more O atoms and higher-oxidation-state carbon. The dissolved organic carbon (DOC) and UV₂₅₄ were not correlated well with changes in nitrogen-containing compounds due to the preferential removal of nitrogen-containing compounds. This study revealed the specificity of organic matter removal during water treatment, and it was helpful in optimizing treatment processes for various raw water to ensure water quality.

Ozone application in different industries: A review of recent developments

Ozone - a powerful antimicrobial agent, has been extensively applied for decontamination purposes in several industries (including food, water treatment, pharmaceuticals, textiles, healthcare, and the medical sectors). The advent of the COVID-19 pandemic has led to recent developments in the deployment of different ozone-based technologies for the decontamination of surfaces, materials and indoor environments. The pandemic has also highlighted the therapeutic potential of ozone for the treatment of COVID-19 patients, with astonishing results observed. The key objective of this review is to summarize recent advances in the utilisation of ozone for decontamination applications in the above-listed industries while emphasising the impact of key parameters affecting microbial reduction efficiency and ozone stability for prolonged action. We realise that aqueous ozonation has received higher research attention, compared to the gaseous application of ozone. This can be attributed to the fact that water treatment represents one of its earliest applications. Furthermore, the application of gaseous ozone for personal protective equipment (PPE) and medical device disinfection has not received a significant number of contributions compared to other applications. This presents a challenge for which the correct application of ozonation can mitigate. In this review, a critical discussion of these challenges is presented, as well as key knowledge gaps and open research problems/opportunities.

Removal of carbol fuchsin from aqueous solution by using three-dimensional porous, economic, and eco-friendly polymer

In this study, a three-dimensional (3D) porous polydimethylsiloxane (PDMS) was prepared using a cheap material with a highly simple and different method. PDMS was firstly applied for the removal of carbol fuchsin (CF) cationic organic dye pollution in this study. Besides, the adsorption capacity of 3D PDMS for removal of the CF was found quite high compared to other materials in already published results. The synthesized PDMS was characterized using several spectroscopic and imaging techniques such as FTIR, Raman, SEM, stereomicroscope, EDX, UV/Vis, and TGA. The optimal conditions were found as 10 mg L^-1 initial concentration, 20 mg of adsorbent dose, 2 h contact time, pH 10, and 25°C temperature. The removal % of CF and the maximum adsorption capacity were calculated at approximately 89% and 88.8 mg g^-1 , respectively. Furthermore, the equilibrium studies showed that the Langmuir isotherm model fitted well with the removal of CF. Moreover, according to the kinetic results, the second-order kinetic model was found suitable (q_e,cal 89.3 mg g^-1 and q_e,exp 88.8 mg g^-1 close to each other) for the adsorption of CF. Also, the thermodynamic studies indicated that adsorption occurs spontaneously, and the adsorption process was physical adsorption. Besides, the reusability of the adsorbent was studied. PRACTITIONER POINTS: Water treatment technology should be low cost, economically viable and in the meantime, eco-friendly. The 3D porous PDMS was prepared by using cheap material with a highly simple method and eco-friendly This unique material was firstly applied for the removal of organic dye in water in this study.

PARAFAC model as an innovative tool for monitoring natural organic matter removal in water treatment plants

The increase of fluorescent natural organic matter (fNOM) fractions during drinking water treatment might lead to an increased coagulant dose and filter clogging, and can be a precursor for disinfection by-products. Consequently, efficient fNOM removal is essential, for which characterisation of fNOM fractions is crucial. This study aims to develop a robust monitoring tool for assessing fNOM fractions across water treatment processes. To achieve this, water samples were collected from six South African water treatment plants (WTPs) during winter and summer, and two plants in Belgium during spring. The removal of fNOM was monitored by assessing fluorescence excitation-emission matrices datasets using parallel factor analysis. The removal of fNOM during summer for South African WTPs was in the range 69-85%, and decreased to 42-64% in winter. In Belgian WTPs, fNOM removal was in the range 74-78%. Principal component analysis revealed a positive correlation between total fluorescence and total organic carbon (TOC). However, TOC had an insignificant contribution to the factors affecting fNOM removal. Overall, the study demonstrated the appearance of fNOM in the final chlorinated water, indicating that fNOM requires a customised monitoring technique.

Molecular detection of opportunistic premise plumbing pathogens in rural Louisiana's drinking water distribution system

Opportunistic premise plumbing pathogens (OPPPs) in drinking water distribution systems are responsible for causing numerous infections such as Legionnaires' disease and pneumonia through the consumption of contaminated drinking water. The incidence of opportunistic pathogens and the number of individuals at risk of contracting infections caused by these OPPPs in drinking water has risen drastically in the past decade. Preflush and postflush water samples were collected from 64 houses in a rural town in northeast Louisiana to determine drinking water quality in terms of understanding abiotic and biotic factors on potential proliferation of OPPPs. Physical and chemical water quality parameters, such as pH, temperature, dissolved oxygen, salinity, and specific conductance were also measured. The quantitative polymerase chain reaction (qPCR) results indicated that Legionella spp. had the highest prevalence and was found in 46/64 samples (72%), followed by Mycobacterium spp. which was found in 43/64 samples (67%), E. coli in 31/64 samples (48%) and, Naegleria fowleri in 4/64 samples (6%) respectively. The results indicate the persistence of Legionella spp. DNA marker in these water samples.

The Role of Nrf2 in the Antioxidant Cellular Response to Medical Ozone Exposure

Ozone (O₃) is a natural, highly unstable atmospheric gas that rapidly decomposes to oxygen. Although not being a radical molecule, O₃ is a very strong oxidant and therefore it is potentially toxic for living organisms. However, scientific evidence proved that the effects of O₃ exposure are dose-dependent: high dosages stimulate severe oxidative stress resulting in inflammatory response and tissue injury, whereas low O₃ concentrations induce a moderate oxidative eustress activating antioxidant pathways. These properties make O₃ a powerful medical tool, which can be used as either a disinfectant or an adjuvant agent in the therapy of numerous diseases. In this paper, the cellular mechanisms involved in the antioxidant response to O₃ exposure will be reviewed with special reference to the activation of nuclear factor erythroid 2-related factor 2 (Nrf2) and its role in the efficacy of ozone therapy.

Assessing the impact of environmental activities on natural organic matter in South Africa and Belgium

The presence and persistence of natural organic matter (NOM) in drinking water treatment plants (WTPs) requires a robust and rapid monitoring method. Measurement and monitoring of NOM fractions using current technology is time-consuming and expensive. This study uses fluorescence measurements in combination with Parallel Factor (ParaFac) analysis to characterize NOM fractions. This was achieved through: (1) determining the origin and composition of NOM fractions using fluorescence index (FI), humification index, biological index, and freshness index, and (2) using multivariate analysis to reveal key parameters and hidden NOM fraction characteristics influenced by seasonal changes and environmental activities. The ParaFac model revealed that the NOM fractions for Belgium plants are mainly hydrophobic acids, aromatic proteins, biological activity, humic acid-like, and fulvic acid-like moieties. The NOM fractions in South African plants were mainly aromatic protein, humic acid-like, fulvic acid-like, tryptophan-like, and protein-like moieties. For Belgium plants in spring FI >1.7, indicating high microbial sources, whereas FI < 1.3 for South African plants, signifying terrestrial sources of NOM. On the one hand, the first principal component (PC1) interpreted 33.02% of the total variance, and is a measure of fluorescent NOM relative concentration. On the other hand, the PC2 interpreted 21.47% and contains most of the information on humification, freshness, and biological indicators, while PC3 interpreted 17.74% and contains information on the origin and variation in environmental conditions. These results will assist in developing a method for online monitoring of NOM fractions in water sources based on environment activities and spectral measurements.

Application of ozonation for pharmaceuticals and personal care products removal from water

Due to the shortening on natural water resources, reclaimed wastewater will be an important water supply source. However, suitable technologies must be available to guaranty its proper detoxification with special concern for the emerging pharmaceutical and personal care products that are continuously reaching municipal wastewater treatment plants. While conventional biological systems are not suitable to remove these compounds, ozone, due to its interesting features involving molecular ozone oxidation and the possibility of generating unselective hydroxyl radicals, has a wider range of action on micropollutants removal and water disinfection. This paper aims to review the studies dealing with ozone based processes for water reuse by considering municipal wastewater reclamation as well as natural and drinking water treatment. A comparison with alternative technologies is given. The main drawback of ozonation is related with the low mineralization achieved that may lead to the production of reaction intermediates with toxic features. The use of hydrogen peroxide and light aided systems enhance ozone action over pollutants. Moreover, scientific community is focused on the development of solid catalysts able to improve the mineralization level achieved by ozone. Special interest is now being given to solar light catalytic ozonation systems with interesting results both for chemical and biological contaminants abatement. Nowadays the integration between ozonation and sand biofiltration seems to be the most interesting cost effective methodology for water treatment. However, further studies must be performed to optimize this system by understanding the biofiltration mechanisms.

From source to filter: changes in bacterial community composition during potable water treatment

Rural communities rely on surface water reservoirs for potable water. Effective removal of chemical contaminants and bacterial pathogens from these reservoirs requires an understanding of the bacterial community diversity that is present. In this study, we carried out a 16S rRNA-based profiling approach to describe the bacterial consortia in the raw surface water entering the water treatment plants of 2 rural communities. Our results show that source water is dominated by the Proteobacteria, Bacteroidetes, and Cyanobacteria, with some evidence of seasonal effects altering the predominant groups at each location. A subsequent community analysis of transects of a biological carbon filter in the water treatment plant revealed a significant increase in the proportion of Proteobacteria, Acidobacteria, Planctomycetes, and Nitrospirae relative to raw water. Also, very few enteric coliforms were identified in either the source water or within the filter, although Mycobacterium was of high abundance and was found throughout the filter along with Aeromonas, Legionella, and Pseudomonas. This study provides valuable insight into bacterial community composition within drinking water treatment facilities, and the importance of implementing appropriate disinfection practices to ensure safe potable water for rural communities.

Polymer-water partition coefficients in polymeric passive samplers

Passive samplers are of the most applied methods and tools for measuring concentration of hydrophobic organic compounds in water (c ₁^W ) in which the polymer-water partition coefficients (D) are of fundamental importance for reliability of measurements. Due to the cost and time associated with the experimental researches, development of a predictive method for estimation and evaluation of performance of polymeric passive samplers for various hydrophobic organic compounds is highly needed and valuable. For this purpose, in this work, following the fundamental chemical thermodynamic equations governing the concerned local equilibrium, successful attempts were made to establish a theoretical model of polymer-water partition coefficients. Flory-Huggins model based on the Hansen solubility parameters was used for calculation of activity coefficients. The method was examined for reliability of calculations using collected data of three polymeric passive samplers and ten compounds. A regression model of form ln(D) = 0.707ln(c ₁^p ) - 2.7391 with an R ²  = 0.9744 was obtained to relate the polymer-water partition coefficients (D) and concentration of hydrophobic organic compounds in passive sampler (c ₁^p ). It was also found that polymer-water partition coefficients are related to the concentration of hydrophobic organic compounds in water (c ₁^W ) as ln(D) = 2.412ln(c ₁^p ) - 9.348. Based on the results, the tie lines of concentration for hydrophobic organic compounds in passive sampler (c ₁^p ) and concentration of hydrophobic organic compounds in water (c ₁^W ) are in the form of ln(c ₁^W ) = 0.293ln(c ₁^p ) + 2.734. The composition of water sample and the interaction parameters of dissolved compound-water and dissolved compound-polymer, temperature, etc. actively influence the values of partition coefficient. The discrepancy observed over experimental data can be simply justified based on the local condition of sampling sites which alter these effective factors.