Hydrogel bowls for cleaning oil spills on water

Superhydrophobic/Superoleophilic PDMS/SiO2 Aerogel Fabric Gathering Device for Self-Driven Collection of Floating Viscous Oil

The persistent challenge of removing viscous oil on water surfaces continues to pose a major concern and requires immediate attention. Here, a novel solution has been introduced in the form of a superhydrophobic/superoleophilic PDMS/SiO₂ aerogel fabric gathering device (SFGD). The SFGD is based on the adhesive and kinematic viscosity properties of oil, enabling self-driven collection of floating oil on the water surface. The SFGD is able to spontaneously capture the floating oil, selectively filter it, and sustainably collect it into its porous fabric interior through the synergistic effects of surface tension, gravity, and liquid pressure. This eliminates the need for auxiliary operations such as pumping, pouring, or squeezing. The SFGD demonstrates exceptional average recovery efficiencies of 94% for oils with viscosities ranging from 10 to 1000 mPa·s at room temperature, including dimethylsilicone oil, soybean oil, and machine oil. With its facile design, ease of fabrication, high recovery efficiency, excellent reclaiming capabilities, and scalability for multiple oil mixtures, the SFGD represents a significant advancement in the separation of immiscible oil/water mixtures of various viscosities and brings the separation process one step closer to practical application.

Environmentally Friendly Plastic Boats - A Facile Strategy for Cleaning Oil Spills on Water with Excellent Efficiency

In this report, we demonstrate a novel plastic boat capable of selectively and efficiently collecting spilled oils while floating on water. The boat has macroscopic openings in its vertical and curved sidewalls. It is easily, quickly, and inexpensively fabricated using an environmentally friendly polymer via a three-dimensional printing technique. Its surface is sequentially coated with nano-ceramic coating liquid and oil, which imparts favorable hydrophobic, oleophilic, and high oil-wettability properties. Using the boat prototype, a small pump system, and an oil boom-like device, we demonstrate that spilled oils with a wide range of viscosities (2.0-1000 cSt at 25-40 °C) are rapidly collected from the surface of both pure water and seawater. Remarkably, it efficiently collects oil spills on seawater under wavy conditions, and the retrieved oil does not mix with any drop of water. Moreover, the boat can be scaled up to a large size easily and has a long-term usage. By exhibiting these characteristics, our developed boat is a prominent potential device for practical oil retrieval applications.

Funnel-Shaped Floating Vessel Oil Skimmer with Joule Heating Sorption Functionality

Floating vessel-type oil collecting devices based on sorbent materials present potential solutions to oil spill cleanup that require a massive amount of sorbent material and manual labor. Additionally, continuous oil extraction from these devices presents opportunities for highly energy-efficient oil skimmers that use gravity as the oil/water separation mechanism. Herein, a sorbent-based oil skimmer (SOS) is developed with a novel funnel-shaped sorbent and vessel design for efficient and continuous extraction of various oils from the water surface. A carbon black (CB) embedded polydimethylsiloxane (PDMS) sponge material is characterized and used as the sorbent in the SOS. The nanocomposite sponge formulation is optimized for high reusability, hydrophobicity, and rapid oil absorption. Joule heating functionality of the sponge is also explored to rapidly absorb highly viscous oils that are a significant challenge for oil spill cleanup. The optimized sponge material with the highest porosity and 15 wt% CB loading is tested in the SOS for large-scale oil spill extraction tests and shows effective cleaning of oil spilled on the water surface. The SOS demonstrates a high maximum extraction rate of 200 mL/min for gasoline and maintains a high extraction rate performance upon reuse when the sponge funnel is cleaned and dried.

A dual-functional layer modified GO@SiO2 membrane with excellent anti-fouling performance for continuous separation of oil-in-water emulsion

As the most significant target of membrane separation, the inadequacy of permeability and anti-fouling frequently constrain the application of the membrane in actual oily wastewater. Herein, a novel concept of membrane surface construction was proposed to mitigate this intractable problem, using SiO₂ as the support layer and graphene oxide (GO) as the isolation layer. The best co-localization proportion of the support layer (56 mg/L) and isolation layer (3.5 mg/L) was determined by the separation performance of the modified membranes for the simulated emulsion. The thin GO layer could effectively prevent contaminants from entering the membrane pores without affecting its roughness. Based on the synergistic action of the isolation layer and support layer, the GO@SiO₂ membrane could well implement emulsion purification with a stable permeability (654.11 LMHB) and high separation efficiency (99.41%). The superior anti-fouling performance of the membrane ensures its long-term cycling stability, with the permeability recovery rate of 89.75% (low-density oil) and 90.41% (high-density oil) after 10 repeated cycles. The storage stability also indirectly increases its value in practical applications. More importantly, the GO@SiO₂ membrane also shows great potential for industrial emulsion treatment with excellent purification and cycling stability (permeability recovery rate of 84.01%).

Potential Efficient Separation of Oil from Bilgewater and Kitchen Wastewater by Fractional Freezing Process

Oily wastewater discharge to water bodies can have many negative consequences, especially on the marine ecological environment. Although there are numerous techniques for treating oily wastewater, this paper aims to introduce and evaluate the potential of the fractional freezing (FF) process as a new oil–water separation technique to overcome the several weaknesses found in the conventional oil–water separation methods. FF separates two liquid compounds based on their freezing point difference. In this study, two oily wastewater samples were used: oily bilgewater and oily kitchen wastewater. The effects of coolant temperature, freezing time, and stirring rate on the FF process efficiency were studied, and the significance of the data was supported by statistical analysis. The results show that a low coolant temperature is essential for allowing crystal nucleation formation and inducing crystal growth for an efficient separation process. However, the higher crystal growth rate that occurs at an even lower temperature might entrap the impurities inside the growing crystal. Consequently, continuing the crystallization for a longer time may yield a less efficient separation process. Furthermore, a too high stirring rate will rupture the solid formation, hence reducing the process efficiency. The final values of oil/grease and free fatty acids (FFA) obtained after the FF process of both samples were found to comply with the standard permitted by the International Maritime Organization (IMO) and Palm Oil Refiners Association of Malaysia (PORAM). Moreover, the p-values obtained for both of the above-mentioned samples were below 0.05 for all experiments. It can be concluded that this method has the potential to separate oil from the oily bilgewater and kitchen wastewater.

Highly efficient reusable superhydrophobic sponge prepared by a facile, simple and cost effective biomimetic bonding method for oil absorption

Superhydrophobic sponges have considerable potential for oil/water separation. Most of the methods used for superhydrophobic modification of sponges require toxic or harmful solvents, which have the drawbacks of hazardous to environment, expensive, and complex to utilize. Moreover, the hydrophobic layer on the surface of sponge is often easily destroyed. In this paper, a highly efficient superhydrophobic sponge with excellent reusability was developed by using a facile, simple and environmentally friendly dopamine biomimetic bonding method. Different types of sponges, such as melamine, polyethylene or polyurethane sponge wastes, were used as raw materials to prepare superhydrophobic sponges, which possess the advantages of inexpensive and abundant. The effects of different dopamine polymerization time and different hydrophobic agent dosage on the hydrophobicity and oil absorption capacity of melamine sponges were optimized. The study results showed that the water contact angle of the superhydrophobic sponge could reach 153° with excellent organic solvent absorption capacity of 165.9 g/g. Furthermore, the superhydrophobic sponge retained approximately 92.1% of its initial absorption capacity after 35 reutilization cycles. More importantly, the dopamine biomimetic bonding superhydrophobic modification method can be used for different types of sponges. Therefore, a universally applicable, facile, simple and environmentally friendly superhydrophobic modification method for sponges was developed.

A Novel Method Based on Headspace-Ion Mobility Spectrometry for the Detection and Discrimination of Different Petroleum Derived Products in Seawater

The objective of the present study is to develop an optimized method where headspace-ion mobility spectrometry is applied for the detection and discrimination between four petroleum-derived products (PDPs) in water. A Box–Behnken design with a response surface methodology was used, and five variables (incubation temperature, incubation time, agitation, sample volume, and injection volume) with influences on the ion mobility spectrometry (IMS) response were optimized. An IMS detector was used as a multiple sensor device, in which, each drift time acts as a specific sensor. In this way, the total intensity at each drift time is equivalent to multiple sensor signals. According to our results, 2.5 mL of sample incubated for 5 min at 31 °C, agitated at 750 rpm, and with an injection volume of 0.91 mL were the optimal conditions for successful detection and discrimination of the PDPs. The developed method has exhibited good intermediate precision and repeatability with a coefficient of variation lower than 5%, (RSD (Relative Standard Deviation): 2.35% and 3.09%, respectively). Subsequently, the method was applied in the context of the detection and discrimination of petroleum-derived products added to water samples at low concentration levels (2 µL·L⁻¹). Finally, the new method was applied to determine the presence of petroleum-derived products in seawater samples.

One-pot fabrication of reusable hybrid sorbents for quick removal of oils from wastewater

The leaking of harmful organic liquids into water resources has had hazardous impacts on living organisms. Herein, we demonstrated the fabrication of hybrid sorbents using s-PPG and organosilane cross-linker. The final product exhibited high, quick absorption capacity, great reusability and excellent oil separation performance from wastewater. They also selectively absorb different oils from the bottom and surface of water without any capacity change, even in harsh conditions like wavy and sub-zero water environment. Experimental results demonstrated that the obtained sorbents are efficient to successfully remove oil from water surface, even at harsh conditions, and float on the water surface before and after oil sorption without any capacity loss and structural change. Simple preparation by avoiding time consuming multistep process, initiator, solvent, activator free reaction medium, high and selective sorption characteristics and great reusability could make these sorbents a promising candidate for the cleaning of water from harmful organic liquids, by absorbing them.

Double-Hydrophobic-Coating through Quenching for Hydrogels with Strong Resistance to Both Drying and Swelling

In recent years, various hydrogels with a wide range of functionalities have been developed. However, owing to the two major drawbacks of hydrogels-air-drying and water-swelling-hydrogels developed thus far have yet to achieve most of their potential applications. Herein, a bioinspired, facile, and versatile method for fabricating hydrogels with high stability in both air and water is reported. This method includes the creation of a bioinspired homogeneous fusion layer of a hydrophobic polymer and oil in the outermost surface layer of the hydrogel via a double-hydrophobic-coating produced through quenching. As a proof-of-concept, this method is applied to a polyacrylamide hydrogel without compromising its mechanical properties. The coated hydrogel exhibits strong resistance to both drying in air and swelling in multiple aqueous environments. Furthermore, the versatility of this method is demonstrated using different types of hydrogels and oils. Because this method is easy to apply and is not dependent on hydrogel surface chemistry, it can significantly broaden the scope of next-generation hydrogels for real-world applications in both wet and dry environments.

Membrane Surface Engineering with Bifunctional Zwitterions for Efficient Oil-Water Separation

Chemical modification provides a solution to the membrane fouling problem in oily water purification. However, complicated synthesis processes and harsh reaction conditions are frequently encountered with this approach. Here we developed two bifunctional zwitterionic materials, i.e., n-aminoethyl piperazine propanesulfonate (P-SO₃-NH₂) and 1,4-bis (3-aminopropyl) piperazine propanesulfonate (P-2SO₃-2NH₂), by a clean method and grafted them onto membrane surface via a fast single-step reaction. These materials endow the resultant membrane a more hydrophilic and smoother surface, significantly improving the water permeability, fouling resistance and recyclability of membrane in forward osmosis oily water reclamation. The water fluxes produced by the P-2SO₃-2NH₂ modified membrane are 47% (from 20.0 to 29.3 LMH) and 60% (from 16.0 to 25.6 LMH) higher than those of the unmodified membrane when DI water and an oily emulsion (1500 ppm) as the respective feeds. A higher water flux recovery is also achieved for the P-2SO₃-2NH₂ modified membrane (94%) than that of the nascent membrane (82%) after a 12-h experiment. These promising findings coupled with a facile and efficient membrane modification approach provide inspiration for both membrane exploration and oily water treatment.

A pillar[5]arene-based hydrogel adsorbent in aqueous environments for organic micropollutants

A pillar[5]arene-based hydrogel adsorbent was prepared for the removal of multiple types of organic micropollutants based on host–guest interactions.