Element sulfur-based autotrophic denitrification constructed wetland as an efficient approach for nitrogen removal from low C/N wastewater

Overlooked in-situ sulfur disproportionation fuels dissimilatory nitrate reduction to ammonium in sulfur-based system: Novel insight of nitrogen recovery

Sulfur-based denitrification is a promising technology in treatments of nitrate-contaminated wastewaters. However, due to weak bioavailability and electron-donating capability of elemental sulfur, its sulfur-to-nitrate ratio has long been low, limiting the support for dissimilatory nitrate reduction to ammonium (DNRA) process. Using a long-term sulfur-packed reactor, we demonstrate here for the first time that DNRA in sulfur-based system is not negligible, but rather contributes a remarkable 40.5 %-61.1 % of the total nitrate biotransformation for ammonium production. Through combination of kinetic experiments, electron flow analysis, 16S rRNA amplicon, and microbial network succession, we unveil a cryptic in-situ sulfur disproportionation (SDP) process which significantly facilitates DNRA via enhancing mass transfer and multiplying 86.7-210.9 % of bioavailable electrons. Metagenome assembly and single-copy gene phylogenetic analysis elucidate the abundant genomes, including uc_VadinHA17, PHOS-HE36, JALNZU01, Thiobacillus, and Rubrivivax, harboring complete genes for ammonification. Notably, a unique group of self-SDP-coupled DNRA microorganism was identified. This study unravels a previously concealed fate of DNRA, which highlights the tremendous potential for ammonium recovery and greenhouse gas mitigation. Discovery of a new coupling between nitrogen and sulfur cycles underscores great revision needs of sulfur-driven denitrification technology.

Greenhouse gases emissions and carbon budget estimation in horizontal subsurface flow constructed wetlands with different plant species

Constructed wetlands (CWs) are pivotal for wastewater treatment due to their high efficiency and numerous advantages. The impact of plant species and diversity on greenhouse gas (GHG) emissions from CWs requires a more comprehensive evaluation. Moreover, controversial perspectives persist about whether CWs function as carbon sinks or sources. In this study, horizontal subsurface flow (HSSF) CWs vegetated with Cyperus alternifolius, Typhae latifolia, Acorus calamus, and the mixture of these three species were constructed to evaluate pollutant removal efficiencies and GHG emissions, and estimate carbon budgets. Polyculture CWs can stably remove COD (86.79 %), NH4+-N (97.41 %), NO3--N (98.55 %), and TP (98.48 %). They also mitigated global warming potential (GWP) by suppressing N2O emissions compared with monoculture CWs. The highest abundance of the Pseudogulbenkiania genus, crucial for denitrification, was observed in polyculture CWs, indicating that denitrification dominated in nitrogen removal. While the highest nosZ copy numbers were observed in CWs vegetated with Cyperus alternifolius, suggesting its facilitation of denitrification-related microbes. Selecting Cyperus alternifolius to increase species diversity is proposed for simultaneously maintaining the water purification capacity and reducing GHG emissions. Carbon budget estimations revealed that all four types of HSSF CWs were carbon sinks after six months of operation, with carbon accumulation capacity of 4.90 ± 1.50 (Cyperus alternifolius), 3.31 ± 2.01 (Typhae latifola), 1.78 ± 1.30 (Acorus calamus), and 2.12 ± 0.88 (polyculture) kg C/m2/yr. This study implies that under these operation conditions, CWs function as carbon sinks rather than sources, aligning with carbon peak and neutrality objectives and presenting significant potential for carbon reduction efforts.

Characteristics and mechanisms of phosphine production in sulfur-based constructed wetlands

Phosphine (PH3) is an important contributor to the phosphorus cycle and is widespread in various environments. However, there are few studies on PH3 in constructed wetlands (CWs). In this study, lab-scale CWs and batch experiments were conducted to explore the characteristics and mechanisms of PH3 production in sulfur-based CWs. The results showed that the PH3 release flux of sulfur-based CWs varied from 0.86±0.04 ng·m-2·h-1 to 1.88±0.09 ng·m-2·h-1. The dissolved PH3 was the main PH3 form in CWs and varied from 2.73 μg·L-1 to 4.08 μg·L-1. The matrix-bound PH3 was a staging reservoir for PH3 and increased with substrate depth. In addition, the sulfur-based substrates had a significant improvement on PH3 production. Elemental sulfur is more conducive to PH3 production than pyrite. Moreover, there was a significant positive correlation between PH3 production, the dsrB gene, and nicotinamide adenine dinucleotide (NADH). NADH might catalyze the phosphate reduction process. And the final stage of the dissimilatory sulfate reduction pathway driven by the dsrB gene might also provide energy for phosphate reduction. The migration and transformation of PH3 increased the available P (Resin-P and NaHCO3-P) from 35 % to 56 % in sulfur-based CW, and the P adsorption capacity was improved by 12 %. The higher proportion of available P increased the plant uptake rate of P by 17 %. This study improves the understanding of the phosphorus cycle in sulfur-based CW and provides new insight into the long-term stable operation of CWs.

Plant-microbe involvement: How manganese achieves harmonious nitrogen-removal and carbon-reduction in constructed wetlands

Carbon deficits in inflow frequently lead to inefficient nitrogen removal in constructed wetlands (CWs) treating tailwater. Solid carbon sources, commonly employed to enhance denitrification in CWs, increase carbon emissions. In this study, MnO2 was incorporated into polycaprolactone substrates within CWs, significantly enhancing NH4+-N and NO3--N removal efficiencies by 48.26-59.78 % and 96.84-137.23 %, respectively. These improvements were attributed to enriched nitrogen-removal-related enzymes and increased plant absorption. Under high nitrogen loads (9.55 ± 0.34 g/m3/d), emissions of greenhouse gases (CO2, CH4, and N2O) decreased by 147.23-202.51 %, 14.53-86.76 %, and 63.36-87.36 %, respectively. N2O emissions were reduced through bolstered microbial nitrogen removal pathways by polycaprolactone and MnO2. CH4 accumulation was mitigated by the increased methanotrophs and dampened methanogenesis, modulated by manganese. Additionally, manganese-induced increases in photosynthetic pigment contents (21.28-64.65 %) fostered CO2 sequestration through plant photosynthesis. This research provides innovative perspectives on enhancing nitrogen removal and reducing greenhouse gas emissions in constructed wetlands with polymeric substrates.

Vertical spatial denitrification performance and microbial community composition in denitrification biofilters coupled with water electrolysis

In this study, a denitrification biofilter coupled with water electrolysis (DNBF-WE) was developed as a novel heterotrophic-hydrogen autotrophic denitrification system, which could enhance denitrification with limited organic carbon in the secondary effluent. The volumetric denitrification rate of DNBF-WE reached 152.16 g N m-3 d-1 (C/N = 2, I = 60 mA, and HRT = 5 h). Besides, the vertical spatial denitrification of DNBF-WE was explored, with the nitrate removal rate being 49.5%, 16.3%, and 29.3% in the top, middle, and bottom, respectively. The concentration of extracellular polymeric substances (EPSs) was consistent with the denitrification performance vertically. The high-throughput sequencing analysis results revealed that autotrophic denitrification bacteria (e.g. Thauera) gradually enriched along DNBF-WE from top to bottom. The functional gene prediction results illustrated the vertical stratification mechanisms of the denitrification. Both dissimilatory nitrate reduction and denitrification contributed to nitrate removal, and denitrification became more advantageous with an increase in the filter depth. The research on both the performance of DNBF-WE and the characteristics of microbial communities in the vertical zones of the biofilter may lay a foundation for the biofilter denitrification process in practice.

High rates of nitrogen removal in aerated VFCWs treating sewage through C-N-S cycle

The efficiency of deep aerated vertical flow constructed wetlands (DA-VFCWs) being operated in Hyderabad, India, was evaluated herein using physicochemical analysis and 16S rRNA amplicon sequencing. The results showed 2-4-fold higher removal rate coefficients for Biochemical oxygen demand (1.32---3.53 m/d) and nitrogen (0.88--1.36 m/d) in DA-VFCWs than those of passive VFCWs. Elevated sulfate concentration in the DA-VFCWs effluent (84-113 mg/L) indicated possibility of sulfur-driven autotrophic denitrification (SDAD) as a major pathway operating in these wetlands besides the classical nitrogen removal pathways. The presence of nitrifiers (3.09-10.02 %), heterotrophic and aerobic denitrifiers (0.79-0.83 %), anammox bacteria (1.31-2.22 %) and SDAD bacteria (0.08-0.73 %) in the biofilm samples collected from the DA-VFCWs exemplify an interplay of Carbon-Nitrogen-Sulfur cycles in these systems. If proven, the presence of an operational SDAD pathway in DA-VFCWs can help reduce surface area requirement in VFCWs substantially besides alleviating biological clogging of the wetland substrate.

Removal of sulfur and nitrogen pollutants in a sediment microbial fuel cell coupled with Vallisneria natans: Efficiency, microbial community structure, and functional genes

The rapid development of the economy has led to an increase in the sulfur and nitrogen load in surface water, which has the potential to cause river eutrophication and the emission of malodorous gases. A lab-scale sediment microbial fuel cell coupled with Vallisneria natans (P-SMFC) was designed for surface water remediation. The enhancement of pollutant removal performance of P-SMFC was evaluated in contrast to the SMFC system without plants (SMFC), the open-circuit control system with plants (C-P), and the open-circuit control system without plants (C-S), while illustrating the mechanisms of the sulfur and nitrogen transformation process. The results demonstrated that the effluent and sediment of P-SMFC had lower concentrations of sulfide compared to other systems. Furthermore, P-SMFC exhibited higher removal efficiency for COD (73.1 ± 8.7%), NH4+-N (80.5 ± 19.8%), and NO3--N (88.5 ± 11.8%) compared to other systems. The closed-circuit conditions and growth of Vallisneria natans create a favorable ecological niche for functional microorganisms involved in power generation, sulfur oxidation, and nitrogen transformation. Additionally, metagenomic analysis revealed that multifunctional bacteria possessing both denitrification and sulfur oxidation genes, such as Thiobacillus, Dechloromonas, and Bacillus, may play simultaneous roles in metabolizing sulfur and nitrogen, thus serving as integral factors in maintaining the performance of P-SMFC. In summary, these findings provide a theoretical reference for the concurrent enhancement of sulfur and nitrogen pollutants removal in P-SMFC and will facilitate its practical application in the remediation of contaminated surface water.

Boosting the denitrification efficiency of iron-based constructed wetlands in-situ via plant biomass-derived biochar: Intensified iron redox cycle and microbial responses

Considering the unsatisfied denitrification performance of carbon-limited wastewater in iron-based constructed wetlands (ICWs) caused by low electron transfer efficiency of iron substrates, utilization of plant-based conductive materials in-situ for improving the long-term reactivity of iron substrates was proposed to boost the Fe (III)/Fe (II) redox cycle thus enhance the nitrogen elimination. Here, we investigated the effects of withered Iris Pseudacorus biomass and its derived biochar on nitrogen removal for 165 days in ICWs. Results revealed that accumulate TN removal capacity in biochar-added ICW (BC-ICW) increased by 14.7 % compared to biomass-added ICW (BM-ICW), which was mainly attributed to the synergistic strengthening of iron scraps and biochar. The denitrification efficiency of BM-ICW improved by 11.6 % compared to ICWs, while its removal capacity declined with biomass consumption. Autotrophic and heterotrophic denitrifiers were enriched in BM-ICW and BC-ICW, especially biochar increased the abundance of electroactive species (Geobacter and Shewanella, etc.). An active iron cycle exhibited in BC-ICW, which can be confirmed by the presence of more liable iron minerals on iron scraps surface, the lowest Fe (III)/Fe (II) ratio (0.51), and the improved proportions of iron cycling genes (feoABC, korB, fhuF, TC.FEV.OM, etc.). The nitrate removal efficiency was positively correlated with the nitrogen, iron metabolism functional genes and the electron transfer capacity (ETC) of carbon materials (P < 0.05), indicating that redox-active carbon materials addition improved the iron scraps bioavailability by promoting electron transfer, thus enhancing the autotrophic nitrogen removal. Our findings provided a green perspective to better understand the redox properties of plant-based carbon materials in ICWs for deep bioremediation in-situ.

A vertical-flow constructed wetland-microalgal membrane photobioreactor integrated system for treating high-pollution-load marine aquaculture wastewater: A lab-scale study

Individual biological water treatment techniques often prove ineffective in removing accumulated high concentrations of nitrogen and phosphorus in the late stages of biofloc aquaculture. To address this issue, we integrated a previously developed autotrophic denitrification and nitrification integrated constructed wetland (ADNI-CW) with a microalgal membrane photobioreactor (MPBR). Under high nitrogen and phosphorus pollution loads in the influent, the standalone ADNI-CW system achieved removal rates of only 24.17 % ± 2.82 % for total nitrogen (TN) and 25.30 % ± 2.59 % for total phosphorus (TP). The optimal conditions for TN and TP degradation and microalgal biomass production in the Chlorella MPBR, determined using response surface methodology, were an inoculum OD680 of 0.394, light intensity of 161.583 μmol/m2/s, and photoperiod of 16.302 h light:7.698 h dark. Under the optimal operating conditions, the integrated ADNI-CW-MPBR system achieved remarkable TN and TP removal rates of 92.63 % ± 2.8 % and 77.46 % ± 8.41 %, respectively, and a substantial microalgal biomass yield of 54.58 ± 6.8 mg/L/day. This accomplishment signifies the successful achievement of efficient nitrogen and phosphorus removal from high-pollution-load marine aquaculture wastewater along with the acquisition of valuable microalgal biomass. A preliminary investigation of the microbial community composition and algal-bacterial interactions in different operational stages of the MPBR system revealed that unclassified_d__Bacteria, Chlorophyta, and Planctomycetes were predominant phyla. The collaborative relationships between bacteria and Chlorella surpassed competition, ensuring highly efficient nitrogen and phosphorus removal in the MPBR system. This study laid the foundation for the green and sustainable development of the aquaculture industry.

Tourmaline mediated enhanced autotrophic denitrification: The mechanisms of electron transfer and Paracoccus enrichment

Autotrophic denitrification (AD) without carbon source is an inevitable choice for denitrification of municipal wastewater under the carbon peaking and carbon neutrality goals. This study first employed sulfur-tourmaline-AD (STAD) as an innovative nitrate removal trial technique in wastewater. STAD demonstrated a 2.23-fold increase in nitrate‑nitrogen (NO3--N) removal rate with reduced nitrite‑nitrogen (NO2--N) accumulation, effectively removing 99 % of nitrogen pollutants compared to sulfur denitrification. Some denitrifiers microorganisms that could secrete tyrosine, tryptophan, and aromatic protein (extracellular polymeric substances (EPS)). Moreover, according to the EPS composition and characteristics analysis, the secretion of loosely bound extracellular polymeric substances (LB-EPS) that bound to the bacterial endogenous respiration and enriched microbial abundance, was produced more in the STAD system, further improving the system stability. Furthermore, the addition of tourmaline (Tm) facilitated the discovery of a new genus (Paracoccus) that enhanced nitrate decomposition. Applying optimal electron donors through metabolic pathways and the microbial community helps to strengthen the AD process and treat low carbon/nitrogen ratio wastewater efficiently.

Thermodynamic Inhibition of Microbial Sulfur Disproportionation in a Multisubunit Designed Sulfur-Siderite Packed Bioreactor

Sulfur disproportionation (S0DP) poses a challenge to the robust application of sulfur autotrophic denitrification due to unpredictable sulfide production, which risks the safety of downstream ecosystems. This study explored the S0DP occurrence boundaries with nitrate loading and temperature effects. The boundary values increased with the increase in temperature, exhibiting below 0.15 and 0.53 kg-N/m3/d of nitrate loading at 20 and 30 °C, respectively. A pilot-scale sulfur-siderite packed bioreactor (150 m3/d treatment capacity) was optimally designed with multiple subunits to dynamically distribute the loading of sulfur-heterologous electron acceptors. Operating two active and one standby subunit achieved an effective denitrification rate of 0.31 kg-N/m3/d at 20 °C. For the standby subunit, involving oxygen by aeration effectively transformed the facultative S0DP functional community from S0DP metabolism to aerobic respiration, but with enormous sulfur consumption resulting in ongoing sulfate production of over 3000 mg/L. Meanwhile, acidification by the sulfur oxidation process could reduce the pH to as low as 2.5, which evaluated the Gibbs free energy (ΔG) of the S0DP reaction to +2.56 kJ, thermodynamically suppressing the S0DP occurrence. Therefore, a multisubunit design along with S0DP inhibition strategies of short-term aeration and long-term acidification is suggested for managing S0DP in various practical sulfur-packed bioreactors.

Enhanced adaptability of pyrite-based constructed wetlands for low carbon to nitrogen ratio wastewater treatments: Modulation of nitrogen removal mechanisms and reduction of carbon emissions

Pyrite-based constructed wetlands (CWs) stimulated nitrate removal performance at low carbon to nitrogen (C/N) ratio has been gaining widely attention. However, the combined effects of pyrite and C/N on the nitrate removal mechanisms and greenhouse gases (GHGs) reduction were ignored. This study found that pyrite-based CWs significantly enhanced nitrate removal in C/N of 0, 1.5 and 3 by effectively driving autotrophic denitrification with high abundance of autotrophs denitrifiers (Rhodanobacter) and nitrate reductase (EC 1.7.7.2), while the enhancement was weakened in C/N of 6 by combined effect of mixotrophic denitrification and dissimilatory nitrate reduction to ammonium (DNRA) with high abundance of organic carbon-degrading bacteria (Stenotrophobacter) and DNRA-related nitrite reductase genes (nrf). Moreover, pyrite addition significantly reduced GHGs emissions from CWs in all stages with the occurrence of iron-coupled autotrophic denitrification. The study shed light on the potential mechanism for pyrite-based CWs for treating low C/N ratio wastewater.

Transformation mechanisms of ammonium and nitrate in subsurface wastewater infiltration system: Implication for reducing greenhouse gas emissions

Subsurface wastewater infiltration system (SWIS) has been recognized as a cost-effective and environmentally friendly tool for wastewater treatment. However, there is a lack of knowledge on the transformation processes of nitrogen (N), hindering the improvement of the N removal efficiency in SWIS. Here, the migration and transformation mechanisms of ammonium (NH4+-N) and nitrate (NO3+-N) over 10 days were explored by 15N labeling technique. Over the study period, 49% of the added 15NH4+-N remained in the soil, 29% was removed via gaseous N emissions, and 14% was leaked with the effluent in the SWIS. In contrast, only 11% of the added 15NO3--N remained in the soil while 65% of the added 15NO3--N was removed via gaseous N emissions, and 12% with the effluent in the SWIS. The main pathway for N2O emission was denitrification (52-70%) followed by nitrification (15-28%) and co-denitrification (9-20%). Denitrification was also the predominant pathway for N loss as N2, accounting for 88-96% of the N2 emission. The dominant biological transformation processes were different at divergent soil depths, corresponding to nitrification zone and denitrification zone along the longitudinal continuum in SWIS, which was confirmed by the expression patterns of microbial gene abundance. Overall, our findings reveal the mechanism of N transformation in SWIS and provide a theoretical basis for establishing a pollutant management strategy and reducing greenhouse gas emissions from domestic wastewater treatment.

Inducement mechanism and control of self-acidification in elemental sulfur fluidizing bioreactor

The sulfur fluidizing bioreactor (S0FB) has significant superiorities in treating nitrate-rich wastewater. However, substantial self-acidification has been observed in engineering applications, resulting in frequent start-up failures. In this study, self-acidification was reproduced in a lab-scale S0FB. It was demonstrated that self-acidification was mainly induced by sulfur disproportionation process, accounting for 93.4 % of proton generation. Supplying sufficient alkalinity to both the influent (3000 mg/L) and the bulk (2000 mg/L) of S0FB was essential for achieving a successful start-up. Furthermore, the S0FB reached 10.3 kg-N/m3/d of nitrogen removal rate and 0.13 kg-PO43-/m3/d of phosphate removal rate, respectively, surpassing those of the documented sulfur packing bioreactors by 7-129 times and 26-65 times. This study offers a feasible and practical method to avoid self-acidification during restart of S0FB and highlights the considerable potential of S0FB in the treatment of nitrate-rich wastewater.

Nitrogen removal performance of improved subsurface wastewater infiltration system under various influent carbon-nitrogen ratios

Subsurface wastewater infiltration system (SWIS) has been recognized as a simple operation and environmentally friendly technology for wastewater purification. However, effectively removing nitrogen (N) remains a challenge, hindering the widespread application of SWIS. In this study, zero-valent iron (ZVI) and porous mineral material (PMM) were applied in SWIS to improve the soil matrix. Our results suggested that the addition of ZVI and PMM could simultaneously enhance N removal efficiency and reduce nitrous oxide emissions. This could be attributed to the abundant electrons generated by ZVI alleviating the electronic limitation of denitrification and the porous structure of PMM providing solid phase support for microbial growth. In addition, the abundance of microbial functional genes increased in modified SWIS, which could further explain the higher pollutant removal efficiency. Overall, this study provides new insights into the mitigation of wastewater pollution and greenhouse gas emissions in SWIS. PRACTITIONER POINTS: ZVI and PMM can adapt to different C loads and enhance pollutant removal efficiency in SWIS. Increasing C-N ratios positively affected the nitrate removal performance and negatively affected ammonium removal performance in SWIS. The amending soil matrix promoted the reduction of the N2 O to N2 and greenhouse gas emissions were well controlled. The abundance of microbial functional genes increased with the improvement of the soil matrix.

Uncovering interactions among ternary electron donors of organic carbon source, thiosulfate and Fe0 in mixotrophic advanced denitrification: Proof of concept from simulated to authentic secondary effluent

To offset the imperfections of higher cost and emission of CO2 greenhouse gas in heterotrophic denitrification (HDN) as well as longer start-up time in autotrophic denitrification (ADN), we synergized the potential ternary electron donors of organic carbon source, thiosulfate and zero-valent iron (Fe0) to achieve efficient mixotrophic denitrification (MDN) of oligotrophic secondary effluent. When the influent chemical oxygen demand to nitrogen (COD/N) ratio ascended gradually in the batch operation with sufficient sulfur to nitrogen (S/N) ratio, the MDN with thiosulfate and Fe0 added achieved the highest TN removal for treating simulated and authentic secondary effluents. The external carbon is imperative for initiating MDN, while thiosulfate is indispensable for promoting TN removal efficiency. Although Fe0 hardly donated electrons for denitrification, the suitable circumneutral environment for denitrification was implemented by OH- released from Fe0 corrosion, which neutralized H+generated during thiosulfate-driven ADN. Meanwhile, Fe0 corrosion consumed the dissolved oxygen (DO) and created the low DO environment suitable for anoxic denitrification. This process was further confirmed by the continuous flow operation for treating authentic secondary effluent. The TN removal efficiency achieved its maximum under the combination condition of influent COD/N ratio of 3.1-3.5 and S/N ratio of 2.0-2.1. Whether in batch or continuous flow operation, the coordination of thiosulfate and Fe0 maintained the dominance of Thiobacillus for ADN, with the dominant heterotrophic denitrifiers (e.g., Plasticicumulans, Terrimonas, Rhodanobacter and KD4-96) coexisting in MDN system. The interaction insights of ternary electron donors in MDN established a pathway for realizing high-efficiency nitrogen removal of secondary effluent.

Synthesis and characterization of titanium dioxide nanoparticles from Bacillus subtilis MTCC 8322 and its application for the removal of methylene blue and orange G dyes under UV light and visible light

Over the last decade there has been a huge increase in the green synthesis of nanoparticles. Moreover, there is a continuous increase in harnessing the potential of microorganisms for the development of efficient and biocompatible nanoparticles around the globe. In the present research work, investigators have synthesized TiO2 NPs by harnessing the potential of Bacillus subtilis MTCC 8322 (Gram-positive) bacteria. The formation and confirmation of the TiO2 NPs synthesized by bacteria were carried out by using UV-Vis spectroscopy, Fourier transforms infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDX/EDS). The size of the synthesized TiO2 NPs was 80-120 nm which was spherical to irregular in shape as revealed by SEM. FTIR showed the characteristic bands of Ti-O in the range of 400-550 cm-1 and 924 cm-1 while the band at 2930 cm-1 confirmed the association of bacterial biomolecules with the synthesized TiO2 NPs. XRD showed two major peaks; 27.5° (rutile phase) and 45.6° (anatase phase) for the synthesized TiO2 NPs. Finally, the potential of the synthesized TiO2 NPs was assessed as an antibacterial agent and photocatalyst. The remediation of Methylene blue (MB) and Orange G (OG) dyes was carried out under UV- light and visible light for a contact time of 150-240 min respectively. The removal efficiency for 100 ppm MB dye was 25.75% and for OG dye was 72.24% under UV light, while in visible light, the maximum removal percentage for MB and OG dye was 98.85% and 80.43% respectively at 90 min. Moreover, a kinetic study and adsorption isotherm study were carried out for the removal of both dyes, where the pseudo-first-order for MB dye is 263.269 and 475554.176 mg/g for OG dye. The pseudo-second-order kinetics for MB and OG dye were 188.679 and 1666.667 mg/g respectively. In addition to this, the antibacterial activity of TiO2 NPs was assessed against Bacillus subtilis MTCC 8322 (Gram-positive) and Escherichia coli MTCC 8933 (Gram-negative) where the maximum zone of inhibition in Bacillus subtilis MTCC 8322 was about 12 mm, and for E. coli 16 mm.

Simultaneously enhanced autotrophic-heterotrophic denitrification in iron-based ecological floating bed by plant biomass: Metagenomics insights into microbial communities, functional genes and nitrogen metabolic pathways

In this study, the ecological floating bed supporting with zero-valent iron (ZVI) and plant biomass (EFB-IB) was constructed to improve nitrogen removal from low-polluted water. The effects of ZVI coupling with plant biomass on microbial community structure, metabolic pathways and functional genes were analyzed by metagenomic sequencing, and the mechanism for nitrogen removal was revealed. Results showed that compared with mono-ZVI system (EFB-C), the denitrification efficiencies of EFB-IB were effectively enhanced, with the higher average NO3--N removal efficiencies of 22.60-59.19%. Simultaneously, the average NH4+-N removal efficiencies were 73.08-91.10%. Metagenomic analyses showed that EFB-IB enriched microbes that involved in iron cycle, lignocellulosic degradation and nitrogen metabolism. Plant biomass addition simultaneously increased the relative abundances of autotrophic and heterotrophic denitrifying bacteria. Network analysis showed the cooperation between autotrophic and heterotrophic denitrifying bacteria in EFB-IB. Moreover, compared with EFB-C, plant biomass addition increased the relative abundances of genes related to iron cycle, lignocellulose degradation and glycolysis processes, ensuring the production of autotrophic and heterotrophic electron donors. Therefore, the relative abundances of key enzymes and functional genes related to denitrification were higher in EFB-IB, being beneficial to the NO3--N removal. Additionally, the correlation analysis of nitrogen removal and functional genes verified the synergistic mechanism of iron-based autotrophic denitrification and plant biomass-mediated heterotrophic denitrification in EFB-IB. In summary, plant biomass has excellent potential to improve the nitrogen removal of iron-based EFB from low-polluted water.

Mixotrophic denitrification process driven by lime sulfur and butanediol: Denitrification performance and metagenomic analysis

Heterotrophic sulfur-based autotrophic denitrification is a promising biological denitrification technology for low COD/TN (C/N) wastewater due to its high efficiency and low cost. Compared to the conventional autotrophic denitrification process driven by elemental sulfur, the presence of polysulfide in the system can promote high-speed nitrogen removal. However, autotrophic denitrification mediated by polysulfide has not been reported. This study investigated the denitrification performance and microbial metabolic mechanism of heterotrophic denitrification, sulfur-based autotrophic denitrification, and mixotrophic denitrification using lime sulfur and butanediol as electron donors. When the influent C/N was 1, the total nitrogen removal efficiency of the mixotrophic denitrification process was 1.67 and 1.14 times higher than that of the heterotrophic and sulfur-based autotrophic denitrification processes, respectively. Microbial community alpha diversity and principal component analysis indicated different electron donors lead to different evolutionary directions in microbial communities. Metagenomic analysis showed the enriched denitrifying bacteria (Thauera, Pseudomonas, and Pseudoxanthomonas), dissimilatory nitrate reduction to ammonia bacteria (Hydrogenophaga), and sulfur oxidizing bacteria (Thiobacillus) can stably support nitrate reduction. Analysis of metabolic pathways revealed that complete denitrification, dissimilatory nitrate reduction to ammonia, and sulfur disproportionation are the main pathways of the N and S cycle. This study demonstrates the feasibility of a mixotrophic denitrification process driven by a combination of lime sulfur and butanediol as a cost-effective solution for treating nitrogen pollution in low C/N wastewater and elucidates the N and S metabolic pathways involved.

The performance, mechanism and greenhouse gas emission potential of nitrogen removal technology for low carbon source wastewater

Excessive nitrogen can lead to eutrophication of water bodies. However, the removal of nitrogen from low carbon source wastewater has always been challenging due to the limited availability of carbon sources as electron donors. Biological nitrogen removal technology can be classified into three categories: heterotrophic biological technology (HBT) that utilizes organic matter as electron donors, autotrophic biological technology (ABT) that relies on inorganic electrons as electron donors, and heterotrophic-autotrophic coupling technology (CBT) that combines multiple electron donors. This work reviews the research progress, microbial mechanism, greenhouse gas emission potential, and challenges of the three technologies. In summary, compared to HBT and ABT, CBT shows greater application potential, although pilot-scale implementation is yet to be achieved. The composition of nitrogen removal microorganisms is different, mainly driven by electron donors. ABT and CBT exhibit the lowest potential for greenhouse gas emissions compared to HBT. N2O, CH4, and CO2 emissions can be controlled by optimizing conditions and adding constructed wetlands. Furthermore, these technologies need further improvement to meet increasingly stringent emission standards and address emerging pollutants. Common measures include bioaugmentation in HBT, the development of novel materials to promote mass transfer efficiency of ABT, and the construction of BES-enhanced multi-electron donor systems to achieve pollutant prevention and removal. This work serves as a valuable reference for the development of clean and sustainable low carbon source wastewater treatment technology, as well as for addressing the challenges posed by global warming.

Enhanced treatment of low C/N ratio rural sewage by a modified multi-stage tidal flow constructed wetland at low temperature: Quantitative contributions of key functional genera

Rural sewage treatment was traditionally faced contradiction between low-treatment rates and the need for low-cost development. To address this challenge, we explored the coupling of effluent circulation and step-feeding strategies in a multi-stage tidal flow constructed wetland (TFCW) to achieve stable nitrogen (N) removal performance under conditions of low carbon-to-nitrogen (C/N) ratios and low temperatures. The modified multi-stage TFCW demonstrated the ability to significantly reduce the concentrations of effluent NH4+-N and NO3--N by 33.9 % and 54.8 % respectively, resulting in values of 7.47 mg/L and 3.93 mg/L. Additionally, it achieved an average TN removal efficiency of 69.2 %. The improved N removal performance of rural sewage by the modified multi-stage TFCW at low temperatures was primarily attributed to autotrophic nitrification, heterotrophic nitrification, and autotrophic denitrification. Among the identified functional genera, Nitrosomonas and Nitrosospira played key roles as autotrophic nitrification bacteria (ANB), contributing to 28.2 % of NH4+-N removal. The key heterotrophic nitrification bacteria (HNB) Acidovorax and Rudaea were mainly responsible for 71.3 % of NH4+-N removal via the two-step ammonia assimilation through the organic nitrogen pathway. Furthermore, Rhodanobacter and Acinetobacter emerged as key autotrophic denitrification bacteria (ADNB), accounting for 79.9 % of NO3--N conversion and removal. In summary, this study provides valuable theoretical insights and supports ongoing efforts in biological regulation to address the challenges associated with rural sewage treatment.

Effect of hydraulic regime on sulfur-packed bed performance: Denitrification and disproportionation

Sulfur-packed beds (SPBs) have been increasingly incorporated into constructed wetland systems to overcome limitations in achieving satisfactory nitrate removal efficiency. However, the underlying impact of hydraulic regimes on SPB performance remains understudied. This study investigated the performance of a pilot-scale SPB, encompassing sulfur autotrophic denitrification (SAD) and sulfur disproportionation (SDP) processes, under various horizontal flow (HF) and vertical flow (VF) regimes. The HF regime exhibited superior SAD efficiency, achieving 3.1-4.4 mg-N/L of nitrate removal compared to 0.9-2.8 mg-N/L under VF regimes. However, greater sulfide production of 3.8-5.6 mg/L was observed, in contrast to only 1.5-2.3 mg/L under VF regimes when SDP occurred. Employing current computational fluid dynamics simulations could predict general regimes but lacked precision in detailing sulfur layer dynamics. In contrast, determining the spatial distribution of SAD substrates and SDP products offered a viable solution, revealing stagnate, short-circuit, and back flows. Moreover, the feasibility of an aeration approach to reduce sulfide emissions below 0.5 mg/L in case of accidental SDP occurrence was confirmed. This study offers a method for assessing detailed hydraulic regimes within SPBs. Additionally, it provides guidance on optimizing the packing of sulfur-based materials when implementing SPBs in constructed wetland systems and presents a strategy for mitigating excessive sulfide emissions.

Nanoparticles and nanofiltration for wastewater treatment: From polluted to fresh water

Water pollution poses significant threats to both ecosystems and human health. Mitigating this issue requires effective treatment of domestic wastewater to convert waste into bio-fertilizers and gas. Neglecting liquid waste treatment carries severe consequences for health and the environment. This review focuses on intelligent technologies for water and wastewater treatment, targeting waterborne diseases. It covers pollution prevention and purification methods, including hydrotherapy, membrane filtration, mechanical filters, reverse osmosis, ion exchange, and copper-zinc cleaning. The article also highlights domestic purification, field techniques, heavy metal removal, and emerging technologies like nanochips, graphene, nanofiltration, atmospheric water generation, and wastewater treatment plants (WWTPs)-based cleaning. Emphasizing water cleaning's significance for ecosystem protection and human health, the review discusses pollution challenges and explores the integration of wastewater treatment, coagulant processes, and nanoparticle utilization in management. It advocates collaborative efforts and innovative research for freshwater preservation and pollution mitigation. Innovative biological systems, combined with filtration, disinfection, and membranes, can elevate recovery rates by up to 90%, surpassing individual primary (<10%) or biological methods (≤50%). Advanced treatment methods can achieve up to 95% water recovery, exceeding UN goals for clean water and sanitation (Goal 6). This progress aligns with climate action objectives and safeguards vital water-rich habitats (Goal 13). The future holds promise with advanced purification techniques enhancing water quality and availability, underscoring the need for responsible water conservation and management for a sustainable future.

Simultaneous nitrate and chromium removal mechanism in a pyrite-involved mixotrophic biofilter

Microbially mediated NO3--N and Cr(VI) reduction is being recognized as an eco-friendly and cost-effective remediation strategy. Iron sulfide mineral, as a natural inorganic electron donor, has a strong influence on NO3--N and Cr(VI) transformation, respectively. However, little is known about the simultaneous nitrate and chromium removal performance and underlying mechanism in an iron sulfide mineral-involved mixotrophic biofilter. This study demonstrated that the NO3--N and Cr(VI) removal efficiencies were stable at 62 ± 8% and 56 ± 10%, and most of them were eliminated in the 0-100-mm region of the biofilter. Cr(VI) was reduced to insoluble Cr(III) via microbial and chemical pathways, which was confirmed by the SEM-EDS morphology and the XPS spectra of biofilm and pyrite particles. SO42- was as a main byproduct of pyrite oxidation; however, the bacterial SO42- reduction synchronously occurred, evidenced by the variations of TOC and SO42- concentrations. These results suggested that there were complicated and intertwined biochemical relations between NO3--N/Cr(VI)/SO42-/DO (electron acceptors) and pyrite/organics (electron donors). Further investigation indicated that both the maximal biomass and greatest denitrifiers' relative abundances in microbial sample S1 well explained why the pollutants were removed in the 0-100-mm region. A variety of denitrifiers such as Pseudoxanthomona, Acidovorax, and Simplicispira were enriched, which probably were responsible for both NO3--N and Cr(VI) removal. Our findings advance the understanding of simultaneous nitrate and chromium removal in pyrite-involved mixotrophic systems and facilitate the new strategy development for nitrate and chromium remediation.

A sustainable integrated anoxic/aerobic bio-contactor process for simultaneously in-situ deodorization and pollutants removal from decentralized domestic sewage

The integration of anoxic filter and aerobic rotating biological contactor shows promise in treating rural domestic sewage. It offers high efficiency, low sludge production, and strong shock resistance. However, further optimization is needed for odor control, pollutant removal, and power consumption. In this study, the investigation on a one-pump-drive lab-scale device of retention anoxic filter (RAF) integrated with hydraulic rotating bio-contactor (HRBC) and its optimal operation mode were conducted. During the 50-day operation, optimal operation parameters were investigated. These parameters included a 175 % reflux ratio (RR), 5-h hydraulic retention time in the RAF (HRTRAF), and 2.5-h hydraulic retention time in the HRBC (HRTHRBC). Those conditions characterized a micro-aerobic environment (DO: 0.6-0.8 mg/L) in RAF, inducing improved deodorization (89.3 % sulfide removal) and denitrification (85.9 % nitrate removal) simultaneously. During the operation period, 84.79 ± 3.87 % COD, 82.71± 2.06 % NH 4 + -N, 74.83 ± 2.06 % TN, 91.68± 2.12 % S2-, and 89.04 ± 1.68 % TON were removed in RAF-HRBC. Based on large amount of operational data, organic loading rate curves of RAF-HRBC were validated and calibrated as a crucial reference to aid in full-scale designs and applications. The richness of microbial community was improved in both RAF and HRBC. In the RAF, the autotrophic sulfide-oxidizing nitrate-reducing bacteria (a-son) and heterotrophic sulfide-oxidizing nitrate-reducing bacteria (h-son) were selectively enriched, which intensified the sulfide removal and denitrification process. In the two-stage HRBC system, the 1st stage RBC was primarily composed of organics degraders, while the 2nd stage RBC consisted mainly of ammonium oxidizers. Overall, the integrated RAF-HRBC process holds significant potential for simultaneously improving pollutant removal and in-situ odor mitigation in decentralized domestic sewage treatment. This process specifically contributes to enhancing environmental sustainability and operational efficiency.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Wastewater reuse in agriculture: Prospects and challenges

Sustainable water recycling and wastewater reuse are urgent nowadays considering water scarcity and increased water consumption through human activities. In 2015, United Nations Sustainable Development Goal 6 (UN SDG6) highlighted the necessity of recycling wastewater to guarantee water availability for individuals. Currently, wastewater irrigation (WWI) of crops and agricultural land appears essential. The present work overviews the quality of treated wastewater in terms of soil microbial activities, and discusses challenges and benefits of WWI in line with wastewater reuse in agriculture and aquaculture irrigation. Combined conventional-advanced wastewater treatment processes are specifically deliberated, considering the harmful impacts on human health arising from WWI originating from reuse of contaminated water (salts, organic pollutants, toxic metals, and microbial pathogens i.e., viruses and bacteria). The comprehensive literature survey revealed that, in addition to the increased levels of pathogen and microbial threats to human wellbeing, poorly-treated wastewater results in plant and soil contamination with toxic organic/inorganic chemicals, and microbial pathogens. The impact of long-term emerging pollutants like plastic nanoparticles should also be established in further studies, with the development of standardized analytical techniques for such hazardous chemicals. Likewise, the reliable, long-term and extensive judgment on heavy metals threat to human beings's health should be explored in future investigations.

A novel sulfur autotrophic denitrification in-situ coupled sequencing batch reactor system to treat low carbon to nitrogen ratio municipal wastewater: Performance, niche equilibrium and pollutant removal mechanisms

A novel integrated sulfur fixed-film activated sludge in SBR system (IS0FAS-SBR) was proposed to treat the low C/N ratio municipal wastewater. The effluent total inorganic nitrogen (TIN) and PO43--P decreased from 17 mg/L and 3.5 mg/L to 8.5 mg/L and 0.5 mg/L, and higher nitrogen removal efficiency was contributed by the autotrophic denitrification. Microbial response characteristics showed that catalase (CAT), reduced nicotinamide adenine dinucleotide (NADH) and extracellular polymeric substance (EPS) alleviated the oxidative stress of sulfur carrier to maintain cell activity, while metabolic activity analysis indicated that the electron transfer rate was enhanced to improve mixotrophic denitrification efficiency. Meanwhile, the increased key enzyme activities further facilitated nitrogen removal and sulfur oxidation process. Additionally, the microbial community, functional proteins and genes revealed a niche equilibrium of C, N, S metabolic bacteria. Sulfur autotrophic in-situ coupled SBR system enlarged a promising strategy for treatment of low C/N ratio municipal wastewater.

Microbial synthesis of titanium dioxide nanoparticles and their importance in wastewater treatment and antimicrobial activities: a review

Nanotechnology (NT) and nanoparticles (NPs) have left a huge impact on every field of science today, but they have shown tremendous importance in the fields of cosmetics and environmental cleanup. NPs with photocatalytic effects have shown positive responses in wastewater treatment, cosmetics, and the biomedical field. The chemically synthesized TiO2 nanoparticles (TiO2 NPs) utilize hazardous chemicals to obtain the desired-shaped TiO2. So, microbial-based synthesis of TiO2 NPs has gained popularity due to its eco-friendly nature, biocompatibility, etc. Being NPs, TiO2 NPs have a high surface area-to-volume ratio in addition to their photocatalytic degradation nature. In the present review, the authors have emphasized the microbial (algae, bacterial, fungi, and virus-mediated) synthesis of TiO2 NPs. Furthermore, authors have exhibited the importance of TiO2 NPs in the food sector, automobile, aerospace, medical, and environmental cleanup.

Simultaneous methanogenesis and denitrification in an anaerobic moving bed biofilm reactor for landfill leachate treatment: Ameliorative effect of rhamnolipids

In this study, an anaerobic moving bed biofilm reactor (AnMBBR) was developed for simultaneous methanogenesis and denitrification (SMD) to treat high-strength landfill leachate for the first time. A novel strategy using biosurfactant to ameliorate the inhibition of landfill leachate on the SMD performance was proposed and the underlying mechanisms were explored comprehensively. With the help of rhamnolipids, the chemical oxygen demand (COD) removal efficiency of landfill leachate was improved from 86.0% ± 2.9% to 97.5% ± 1.6%, while methane yields increased from 50.1 mL/g-COD to 69.6 mL/g-COD, and the removal efficiency of NO3--N was also slightly increased from 92.5% ± 1.9% to 95.6% ± 1.0%. The addition of rhamnolipids increased the number of live cells and enhanced the secretion of extracellular polymeric substances (EPS) and key enzyme activity, indicating that the inhibitory effect was significantly ameliorated. Methanogenic and denitrifying bacteria were enhanced by 1.6 and 1.1 times, respectively. Analysis of the microbial metabolic pathways demonstrated that landfill leachate inhibited the expression of genes involved in methanogenesis and denitrification, and that their relative abundance could be upregulated with the assistance of rhamnolipids addition. Moreover, extended Deraguin - Landau - Verwery - Oxerbeek (XDLVO) theory analysis indicated that rhamnolipids reduced the repulsive interaction between biofilms and pollutants with a 57.0% decrease in the energy barrier, and thus accelerated the adsorption and uptake of pollutants onto biofilm biomass. This finding provides a low-carbon biological treatment protocol for landfill leachate and a reliable and effective strategy for its sustainable application.

Influence of nitrogen sources on wastewater treatment performance by filamentous algae in constructed wetland system

Although filamentous algae have the characteristics of high nutrient assimilation ability, and adaptation to different conditions, studies on their role in water purification of constructed wetlands (CWs) are limited. In this study, the wastewater treatment capacity under different nitrogen sources was explored by constructing a filamentous algal CW (FACW) system. Results confirmed the fast and stable operation efficiency of the FACW system. Ammonia nitrogen was preferred in Cladophora sp. absorption and assimilation. The nutrient consumption rate (NCR) for total nitrogen (TN) of AG was 2.65 mg g-1 d-1, much higher than that of nitrate nitrogen (NG) (0.89 mg g-1 d-1). The symbiosis of bacteria and Cladophora sp. Contributed to pollutant removal. A stable and diverse community of microorganisms was found on Cladophora sp. Surface, which revealed different phylogenetic relationships and functional bacterial proportions with those attached on sediment surface. In addition, temperature and light intensity have great influence on the purification ability of plants, and low hydraulic retention time is beneficial to the cost-effective operation of the system. This study provides a method to expand the utilization of wetland plants and apply large filamentous algae to the purification of wetland water quality.

Z. AL-bonsrulah H. Optimization of oil industry wastewater treatment system and proposing empirical correlations for chemical oxygen demand removal using electrocoagulation and predicting the system's performance by artificial neural network

The alarming pace of environmental degradation necessitates the treatment of wastewater from the oil industry in order to ensure the long-term sustainability of human civilization. Electrocoagulation has emerged as a promising method for optimizing the removal of chemical oxygen demand (COD) from wastewater obtained from oil refineries. Therefore, in this study, electrocoagulation was experimentally investigated, and a single-factorial approach was employed to identify the optimal conditions, taking into account various parameters such as current density, pH, COD concentration, electrode surface area, and NaCl concentration. The experimental findings revealed that the most favorable conditions for COD removal were determined to be 24 mA/cm2 for current density, pH 8, a COD concentration of 500 mg/l, an electrode surface area of 25.26 cm2, and a NaCl concentration of 0.5 g/l. Correlation equations were proposed to describe the relationship between COD removal and the aforementioned parameters, and double-factorial models were examined to analyze the impact of COD removal over time. The most favorable outcomes were observed after a reaction time of 20 min. Furthermore, an artificial neural network model was developed based on the experimental data to predict COD removal from wastewater generated by the oil industry. The model exhibited a mean absolute error (MAE) of 1.12% and a coefficient of determination (R2) of 0.99, indicating its high accuracy. These findings suggest that machine learning-based models have the potential to effectively predict COD removal and may even serve as viable alternatives to traditional experimental and numerical techniques.

Managing microbial sulfur disproportionation for optimal sulfur autotrophic denitrification in a pilot-scale elemental sulfur packed-bed bioreactor

Elemental sulfur packed-bed (S0PB) bioreactors for autotrophic denitrification have gained more attention in wastewater treatment due to their organic carbon-free operation, low operating cost, and minimal carbon emissions. However, the rapid development of microbial S0-disproportionation (MS0D) in S0PB reactor during deep denitrification poses a significant drawback to this new technology. MS0D, the process in which sulfur is used as both an electron donor and acceptor by bacteria, plays a crucial role in the microbial-driven sulfur cycle but remains poorly understood in wastewater treatment setups. In this study, we induced MS0D in a pilot-scale S0PB reactor capable of denitrifying over 1000 m3/d nitrate-containing wastewater. Initially, the S0PB reactor stably removed 6.6 mg-NO3--N/L nitrate at an empty bed contact time (EBCT) of 20 mins, which was designated the S0-denitrification stage. To induce MS0D, we reduced the influent nitrate concentrations to allow deep nitrate removal, resulted in the production of large quantities of sulfate and sulfide (SO42-:S2- 3.2 w/w). Meanwhile, other sulfur-heterologous electron acceptors (SHEAs), e.g., nitrite and DO, were also kept at trace levels. The negative correlations between the SHEAs concentrations and the sulfide productions indicated that the absence of SHEAs was a primary inducing factor to MS0D. The microbial community drastically diverged in response to the depletion of SHEAs during the switch from S0-denitrification to S0-disproportionation. An evident enrichment of sulfur-disproportionating bacteria (SDBs) was found at the S0-disproportionation stage, accompanied by the decline of sulfur-oxidizing bacteria (SOBs). In the end, we discovered that shortening the EBCT and increasing the reflux ratio could inhibit sulfide production by reducing it from 43.9 mg/L to 3.2 mg/L or 25.5 mg/L. In conclusion, our study highlights the importance of considering MS0D when designing and optimizing S0PB reactors for sustainable autotrophic sulfur denitrification in real-life applications.

New insights into the effects of wetland plants on nitrogen removal pathways in constructed wetlands with low C/N ratio wastewater: Contribution of partial denitrification-anammox

Nitrogen (N) removal in constructed wetlands (CWs) was often challenged by limited denitrification due to the lack of carbon source, and wetland plants would be more important in carbon (C) and N cycling in CWs with influent of low carbon to nitrogen (C/N) ratio. In this study, the underlying mechanisms of nitrate nitrogen (NO3--N) removal under different low C/N ratios were revealed by constructing microcosm CWs, and the unplanted group was set as the control to explore the role of plants in N removal. The results showed that plants and the concentration of influent carbon significantly affected NO3--N and total nitrogen (TN) removal (p < 0.05). The presence of plants significantly increased the concentration of DO and wetland plant-derived DOM (p < 0.05). The enhanced NO3--N and TN removal with increased C/N ratio attributed to high denitrification activity reflected in the abundance of denitrification microbes and genes. However, the contribution of partial denitrification-anammox (PDN/AMX) to N removal in CWs decreased from more than 75.3% at the C/N ratio of 0 to 70.4% and 22.3% with the C/N ratio increased to 1.5 and 3, respectively. Furthermore, the PDN/AMX process was negatively correlated with favorable oxygen environment in the planted group and plants roots carbon secretion, but the overall N removal efficiency of the CWs was enhanced by increased abundance of N removal-related functional genes in the presence of plants. Abovementioned results provided new insights to explain the mechanism of N removal in CWs under low C/N ratio.

Illuminating plant-microbe interaction: How photoperiod affects rhizosphere and pollutant removal in constructed wetland?

Rhizosphere is a crucial area in comprehending the interaction between plants and microorganisms in constructed wetlands (CWs). However, influence of photoperiod, a key factor that regulates photosynthesis and rhizosphere microbial activity, remains largely unknown. This study investigated the effect of photoperiod (9, 12, 15 h/day) on pollutant removal and underlying mechanisms. Results showed that 15-hour photoperiod treatment exhibited the highest removal efficiencies for COD (87.26%), TN (63.32%), and NO3--N (97.79%). This treatment enhanced photosynthetic pigmentation and root activity, which increased transport of oxygen and soluble organic carbon to rhizosphere, thus promoting microbial nitrification and denitrification. Microbial community analysis revealed a more stable co-occurrence network due to increased complexity and aggregation in the 15-hour photoperiod treatment. Phaselicystis was identified as a key connector, which was responsible for transferring necessary carbon sources, ATP, and electron donors that supported and optimized nitrogen metabolism in the CWs. Structural equation model analysis emphasized the importance of plant-microbe interactions in pollutant removal through increased substance, information, and energy exchange. These findings offer valuable insights for CWs design and operation in various latitudes and rural areas for small-scale decentralized systems.

Concentration ciguatoxins in fillet of fish: A global systematic review and meta-analysis

In the current study, an attempt was made to meta-analyze and discuss the concentration of ciguatoxins (CTXs) in fillets of fish based on country and water resources subgroups. The search was conducted in Scopus and PubMed, Embase and Web of Science to retrieve papers about the concentration of CTXs in fillet fish until July 2022. Meta-analysis concentration of CTXs was conducted based on countries and water resources subgroups in the random effects model (REM). The sort of countries based on the pooled concentration of CTXs was Kiribati (3.904 μg/kg) > Vietnam (1.880 μg/kg) > Macaronesia (1.400 μg/kg) > French (1.261 μg/kg) > China (0.674 μg/kg) > Japan (0.572 μg/kg) > USA (0.463 μg/kg) > Spain (0.224 μg/kg) > UK (0.170 μg/kg) > Fiji (0.162 μg/kg) > Mexico (0.150 μg/kg) > Australia (0.138 μg/kg) > Portugal (0.011 μg/kg). CTXs concentrations in all countries are higher than the safe limits of CTX1C (0.1 μg/kg). However, based on the safe limits of CTX1P, the concentrations of CTXs in just Portugal meet the regulation level (0.01 μg/kg). The minimum and maximum concentrations of CTXs were as observed in Selvagens Islands (0.011 μg/kg) and St Barthelemy (7.875 μg/kg) respectively. CTXs concentrations in all water resources are higher than safe limits of CTX1C (0.1 μg/kg) and CTX1B (0.01 μg/kg). Therefore, it is recommended to carry out continuous control pans of CTXs concentration in fish in different countries and water sources.

The ability of twisted nanographene for removal of Pb2+, Hg2+ and Cd2+ ions from wastewater: Computational study

CONTEXT

Heavy metal ion removal from wastewater has become a global concern due to its extensive negative effects on human health and the environment. The density functional theory is employed to investigate the possibility of removing Pb²⁺, Hg²⁺, and Cd²⁺ ions from wastewater using nano-graphene. Researchers have shown that NG can efficiently remove heavy metals from media. Additionally, it was shown that the adsorption of Pb²⁺, Hg²⁺, and Cd²⁺ ions might reduce the large pristine NG (HOMO-LUMO) gap.

METHODS

HSE06 may accurately represent NG electrical characteristics. The DFT-D3 method was also used to account for Van der Waals interactions in the present study. The results demonstrated that charge transfer and binding energy remained greater in cation-NG systems with greater electron transfer rates. Pb²⁺, Hg²⁺, and Cd²⁺ adsorption results indicated that E_gap was significantly reduced by 68%, 15%, and 21%, respectively. The Pb²⁺@NG complex exhibited the strongest oscillator strength. This may be explained by the enormous occupation number difference between the 2px orbital of the C atoms and the 6 s orbital of the Pb²⁺ cations. The greater E_bin value of Pb²⁺@NG is consistent with the increased predicted redshifts (199 nm). DFT (hybrid functional HSE06) studies that rely on time showed that the relevant complexes have "ligand-to-metal charge transfer" excitations. In general, it was found that Pb²⁺@NG had the greatest k value, binding energy, redshifts, and charge transfer rate among the complexes. The theoretical insights of this study may influence experimental efforts to identify NG-based compounds that are effective and efficient at removing pollutants from wastewater.

Latest insights on separation and storage of carbon compounds in buildings towards sustainable environment: Recent innovations, challenges, future perspectives and application of machine learning

Throughout the past few decades, scientific agencies have paid a lot of attention to environmental issues such as acid rain, water poisoning, and global warming. In order to solve these environmental problems, metal-organic frameworks (MOFs), which are made up of metal ions and/or clusters attached to organic ligands, have shown some promise. With a focus on the usage of MOFs, this paper examines the most recent developments, difficulties, and potential future directions in the separation and storage of carbon compounds in buildings for a sustainable environment. The importance of using MOFs in decarbonizing water systems and lowering environmental concerns in buildings is highlighted in the research. It addresses the most recent developments in the use of MOFs for renewable energy, such as the elimination of dangerous gases like CO2 and CH4 from water systems. The article also looks at how MOFs might be used to decarbonize water systems in structures, with a focus on how carbon-containing compounds are stored chemically and physically using artificial neural network models. MOFs are a potential solution for renewable energy and environmental remediation in buildings because they have special physical and chemical characteristics like adjustable pores, high porosity, and tiny pore size. The report offers insights into existing treatments and invites academics to investigate MOFs' potential for resolving environmental problems in order to create a sustainable environment in buildings.

Effect of salinity stress on nitrogen and sulfur removal performance of short-cut sulfur autotrophic denitrification and anammox coupling system

The effects of salinity on anaerobic nitrogen and sulfide removal were investigated in a coupled anammox and short-cut sulfur autotrophic denitrification (SSADN) system. The results revealed that salinity had significant nonlinear effects on the nitrogen and sulfur transformations in the coupled system. When the salinity was <2 %, the anammox and SSADN activities increased with increasing salinity, and the total nitrogen removal rate, S⁰ production rate, and nitrite production rate were 0.41 kg/(m³·d), 0.37 kg/(m³·d), and 0.28 kg/(m³·d), respectively. With continuous increase of salinity, the performances of the anammox and SSADN gradually decreased, and the three indicators decreased to 0.14 kg/(m³·d), 0.22 kg/(m³·d), and 0.14 kg/(m³·d) at 5 % salinity, respectively. When the salinity reached 5 %, the nitrogen removal contribution of anammox decreased to 68.4 %, while the contribution of the sulfur autotrophic denitrification increased to 31.6 %. The coupled system recovered in a short time after alleviation of the salinity stress, and the SSADN activity recovery was faster than anammox. The microbial community structure and functional microbial abundance in the coupled system changed significantly with increasing salinity, and the functional microbial abundance after recovery was considerably different from the initial state.

Acorus calamus recycled as an additional carbon source in a microbial fuel cell-constructed wetland for enhanced nitrogen removal

Acorus calamus was recycled as an additional carbon source in microbial fuel cell-constructed wetlands (MFC-CWs), for efficient nitrogen removal of low carbon wastewater. The pretreatment methods, adding positions, and nitrogen transformations were investigated. Results indicated that alkali-pretreatment cleaved the benzene rings in dominant released organics, producing chemical oxygen demand of 164.5 mg from per gram of A. calamus. Pretreated biomass addition in the anode of MFC-CW attained the maximum total nitrogen removal of 97.6% and power generation of 12.5 mW/m², which were higher than those with biomass in the cathode (97.6% and 1.6 mW/m², respectively). However, the duration of a cycle with biomass in the cathode (20-25 days) was longer than that in the anode (10-15 days). Microbial metabolisms related to organics degradation, nitrification, denitrification, and anammox were intensified after biomass recycling. This study provides a promising method to improve nitrogen removal and energy recovery in MFC-CWs.

Sodium hydroxide or tetramethylammonium hydroxide modified corncob combined with biodegradable polymers to prepare slow-release carbon source for wastewater denitrification

This study proposed a method to improve the bioavailability of artificially prepared carbon sources for the purpose of wastewater denitrification. This carbon source (named SPC) was prepared by mixing corncobs with poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBV), where the corncobs were pretreated by NaOH or TMAOH. The results of compositional analysis and FTIR showed that both NaOH and TMAOH degraded lignin, hemicellulose and their connection bonds in corncob, thus increased the cellulose content from 39% to 53% and 55%, respectively. The cumulative carbon release from SPC was about 9.3 mg/g and was consistent with both the first-order kinetic and Ritger-Peppas equation. The released organic matters contained low concentration of refractory components. Correspondingly, it showed excellent denitrification performance in simulated wastewater, and the total nitrogen (TN) removal rate was above 95% (influent NO₃^--N was 40 mg/L) and effluent residual chemical oxygen demand (COD) was less than 50 mg/L.

Woody and herbaceous wastes for the remediation of polluted waters of wetlands

Plants wastes play an important role during water remediation in wetlands. Plant waste is made into biochar, which is usually used directly or as a water biofilter to remove pollutants. While, the water remediation effect of combination for biochar from woody and herbaceous wastes coupling with substrate types in CWs have not been fully explored. To explore the water remediation effect of combination for biochar coupling with substrate on pH, Turbidity, COD, NH₄⁺-N, TN and TP, four plant configuration modes combining seven woody plants and eight herbaceous plants (Plants A, Plants B, Plants C, Plants D) were coupled with three substrate types (Substrate 1, Substrate 2, Substrate 3) as 12 experiment groups, using water detection methods and significant differences test (LSD) to analyze. Results showed: (1) Compared to Substrate 3, Substrate 1 and Substrate 2 removed significantly higher in pollutants concentration (p < 0.05); (2) NH₄⁺-N final concentration in Plants C and Plants D were both significantly lower than Plants A and Plants B coupling with Substrate 1 and Substrate 2 (p < 0.05). The TN final concentration of Plants C was significantly lower than Plants A in Substrate 1 (p < 0.05), and Plants A's turbidity was significantly lower than Plants C and Plants D's in Substrate 2 (p < 0.05); (3) The pollutants removal of group A1, A2, B1, B2, C1, C2, D1 and D2 were significantly higher than other experiment groups (p < 0.05). Group A2, B2, C1 and D1 had the best water remediation effect and better stability of plant community. Findings in this study will be beneficial for remediating polluted water and building sustainable wetlands.

Land subsidence susceptibility mapping: comparative assessment of the efficacy of the five models

Land subsidence (LS) as a major geological and hydrological hazard poses a major threat to safety and security. The various triggers of LS include intense extraction of aquifer bodies. In this study, we present an LS inventory map of the Daumeghan plain of Iran using 123 LS and 123 non-LS locations which were identified through field survey. Fourteen LS causative factors related to topography, geology, hydrology, and anthropogenic characteristics were selected based on multi-collinearity test. Based on the results, five susceptibility maps were generated employing models and input data. The LS susceptibility models were evaluated and validated using the receiver operating characteristic (ROC) curve and statistical indices. The results indicate that the LS susceptibility maps produced have good accuracy in predicting the spatial distribution of LS in the study area. The result showed that the optimization models BA and GWO were better than the other machine learning algorithm (MLA). In addition, The BA model has 96.6% area under of ROC (AUROC) followed by GWO (95.8%), BART (94.5%), BRT (93.1%), and SVR (92.7%). The LS susceptibility maps formulated in our study can serve as a useful tool for formulating mitigation strategies and for better land-use planning.

Solar light driven enhanced photocatalytic treatment of azo dye contaminated water based on Co-doped ZnO/ g-C3N4 nanocomposite

The current research concentrated on the Co-precipitation synthesis of g-C₃N₄ (CN), ZnO, ZnO/CN, and Co-doped ZnO/CN nanocomposite, as well as the solar light enhanced photocatalytic treatment of Reactive Red 120 (RR120) from genuine wool textile effluent. The 3D flower-like structure of Co-doped ZnO distributed on the surface of CN thin sheets, according to structural studies employing XRD and SEM examinations Electrochemical experiments exhibited that the Co-doped ZnO/CN nanocomposite has a large electroactive surface area. The optical band-gap values of CN, ZnO, ZnO/CN, and Co-doped ZnO/CN nanocomposites were 2.68, 3.13, 2.38, and 2.23 eV, respectively, according to optical characterizations. The synergistic effects and heterojunction produced by Co-doped ZnO and CN can be linked to the narrow gap in nanocomposites. After 75, 60, 50, and 40 min of exposure to solar light, photocatalytic degradation assays for 250 mL of 20 mg/L RR120 solution in the presence of CN, ZnO, ZnO/CN, and Co-doped ZnO/CN nanocomposites demonstrated 100% dye treatment. The applicability of photocatalysts for decolorization of 250 mL of 10 mg/L RR120 prepared from actual wool textile wastewater was investigated, and the results showed that Co-doped ZnO/CN nanocomposites for treatment of RR120 from actual wool textile wastewater were highly efficient at photocatalytic degradation.

The concentration of Lithium in water resources: A systematic review, meta-analysis and health risk assessment

The presence of trace elements such as lithium (Li) in water resources in the long term can endanger consumers' health. Several studies have been conducted on Li concentration in water sources; hence, this study attempted to retrieve studies using a systematic search. The search was conducted in Web of Sciences, Embase, PubMed, and Scopus databases from 1 January 2010 to 15 January 2023. Li concentration was meta-analyzed based on the type of water resources and countries subgroups in the random effects model (REM) statistical analysis. In addition, health risk assessment in different age groups was calculated using the target hazard quotient (THQ). This study included 76 papers with 157 data reports in our meta-analysis. The overall pooled concentration of Li was 5.374 (95 % CI: 5.261-5.487 μg/L). The pooled concentration of Li in groundwater (40.407 μg/L) was 14.53 times surface water (2.785 μg/L). The highest water Li content was attributed to Mexico (2,209.05 μg/L), Bolivia (1,444.05 μg/L), Iraq (1,350 μg/L), and Argentina (516.39 μg/L). At the same time, the lowest water Li content was associated with Morocco (1.20 μg/L), Spain (0.46 μg/L), and India (0.13 μg/L). THQ due to Li in water resources in consumers of Iraq, Mexico, South Africa, Afghanistan, Bolivia, Portugal, Malawi, South Korea, Nepal, South Korea, Argentina, and the USA was higher than 1 value. Therefore, continuous monitoring of Li concentration in water sources and reducing Li concentration, especially in groundwater water, using new water treatment processes in these countries are recommended.

Characterization and photocatalytic activity of CoCr2O4/g-C3N4 nanocomposite for water treatment

One of the materials that has recently been used to remove environmental pollution from industrial effluents with photocatalytic technology is cobalt chromate (CoCr₂O₄) nanoparticles. An effective way to improve the photocatalytic properties of materials is to composite them with other photocatalysts to prevent recombination of electron-holes and accelerate the transfer of oxidation/reduction agents. Graphitic carbon nitride (g-C₃N₄) is an excellent choice due to its unique properties. In this research, CoCr₂O₄ and its composite with g-C₃N₄ (5, 10, and 15%) were synthesized by polyacrylamide gel method and characterized by X-ray diffraction, scanning electron microscopy, FTIR, UV-Vis spectroscopy techniques. The photocatalytic behavior of synthesized nanoparticles was investigated in the degradation process of methylene blue dye. The results showed that the composite samples have higher efficiency in photocatalytic activity than the pure CoCr₂O₄ sample. Using CoCr₂O₄-15 wt%g-C₃N₄ nanocomposite, after 80 min, methylene blue was completely degraded. The mechanism of degradation by CoCr₂O₄-g-C₃N₄ nanocomposite was the superoxide radical produced by the reaction of electrons with oxygen absorbed on the catalyst surface, as well as optically produced holes directly.

Green synthesis of Fe3O4 nanoparticles using Alliaceae waste (Allium sativum) for a sustainable landscape enhancement using support vector regression

The synthesis of metal nanoparticles using green chemistry methods has gained significant attention in the field of landscape enhancement. Researchers have paid close attention to the development of very effective green chemistry approaches for the production of metal nanoparticles (NPs). The primary goal is to create an environmentally sustainable technique for generating NPs. At the nanoscale, ferro- and ferrimagnetic minerals such as magnetite exhibit superparamagnetic properties (Fe3O4). Magnetic nanoparticles (NPs) have received increased interest in nanoscience and nanotechnology due to their physiochemical properties, small particle size (1-100 nm), and low toxicity. Biological resources such as bacteria, algae, fungus, and plants have been used to manufacture affordable, energy-efficient, non-toxic, and ecologically acceptable metallic NPs. Despite the growing demand for Fe3O4 nanoparticles in a variety of applications, typical chemical production processes can produce hazardous byproducts and trash, resulting in significant environmental implications. The purpose of this study is to look at the ability of Allium sativum, a member of the Alliaceae family recognized for its culinary and medicinal benefits, to synthesize Fe3O4 NPs. Extracts of Allium sativum seeds and cloves include reducing sugars like glucose, which may be used as decreasing factors in the production of Fe3O4 NPs to reduce the requirement for hazardous chemicals and increase sustainability. The analytic procedures were carried out utilizing machine learning as support vector regression (SVR). Furthermore, because Allium sativum is widely accessible and biocompatible, it is a safe and cost-effective material for the manufacture of Fe3O4 NPs. Using the regression indices metrics of root mean square error (RMSE) and coefficient of determination (R2), the X-ray diffraction (XRD) study revealed the lighter, smoother spherical forms of NPs in the presence of aqueous garlic extract and 70.223 nm in its absence. The antifungal activity of Fe3O4 NPs against Candida albicans was investigated using a disc diffusion technique but exhibited no impact at doses of 200, 400, and 600 ppm. This characterization of the nanoparticles helps in understanding their physical properties and provides insights into their potential applications in landscape enhancement.

Identification of microbial consortia for sustainable disposal of constructed wetland reed litter wastes

Reed is a typical emerged plant in constructed wetlands (CWs). Its litters were used as raw materials for preparing Fe-C ceramic-filler (Fe-C-CF). The physical and chemical properties of Fe-C-CF were studied under different conditions, including the mass ration of Fe to carbon (Fe/C ratio), sintering temperature, and time, to determine the optimum preparing conditions. Meanwhile, the denitrification performance and CO₂ emission flux of the surface flow constructed wetland (SFCW) systems were investigated when using Fe-C-CF as the matrix. The optimum preparing conditions for Fe-C-CF were Fe/C ratio of 1:1, sintering temperature and time of 500 °C and 20 min, respectively. The SFCW system with Fe-C-CF obtained a higher total nitrogen (TN), nitrate nitrogen (NO₃^--N), and ammonia nitrogen (NH₃-N) removal efficiencies than the control SFCW system without Fe-C-CF. Compared with the heterotrophic denitrification process, the SFCW system with Fe-C-CF decreased CO₂ emission by 67.9 g m^-2 per year. The results of microbial community analysis indicated that addition of Fe-C-CF increased the diversity and abundance of microbial communities in the SFCW systems. The dominant genus of the SFCW system with Fe-C-CF was Bacillus, while Uliginosibacterium was the dominant genus in the system without the filler.

Aerobic denitrifying using actinobacterial consortium: Novel denitrifying microbe and its application

The aerobic denitrifying capacity of actinomycete strain has been investigated recently, while little is known about nitrogen and carbon substrate removal by mix-cultured aerobic denitrifying actinobacteria (Mix-CADA) community. Hence, three Mix-CADA consortiums, named Y23, X21, and Y27, were isolated from urban lakes to investigate their aerobic denitrification capacity, and their removal efficiency for nitrate and dissolved organic carbon were >97 % and 90 %, respectively. Illumina Miseq sequencing revealed that Streptomyces was the most dominant genus in the Mix-CADA consortium. Network analysis indicated that Streptomyces exfoliates, as the core species in the Mix-CADA consortium, majorly contributed to dissolved organic carbon and total nitrogen reduction. Moreover, the three Mix-CADA consortiums could remove 78 % of the total nitrogen and 61 % of the permanganate index from the micro-polluted l water. Meanwhile, humic-like was significantly utilized by three Mix-CADA consortiums, whereas Mix-CADA Y27 could also utilize aromatic protein and soluble microbial by-product-like in the micro-polluted raw water purification. In summary, this study will offer a novel perspective for the purification of micro-polluted raw water using the Mix-CADA consortium.

Effects of salinity on nitrite and elemental sulfur accumulation in a double short-cut sulfur autotrophic denitrification process

Double short-cut sulfur autotrophic denitrification (DSSADN) coupled with Anammox is of great significance in the low-carbon treatment of nitrogen-containing wastewater. In order to achieve high salinity autotrophic nitrogen removal, the effects of different salinities on the accumulation characteristics of NO₂^--N and S⁰ and microorganisms in DSSADN process were studied. The results showed that the effect of salinity on the DSSADN process could be categorized into the stimulation, stable, and inhibition. When the salinity gradually increased to 2.5 %, the highest NO₂^--N production rate (NiPR) and S⁰ production rate (S⁰PR) of DSSADN were 0.54 kg/(m³·d) and 1.1 kg/(m³·d) respectively. NiPR and S⁰PR gradually decreased as the salinity increased to more than 3 %. However, salinity had a relatively low impact on nitrite accumulation efficiency and S⁰ accumulation efficiency, which were 80 % and 81.5 %, respectively, when the salinity reached 5 %. Salinity has a great influence on the structure and abundance of microbial communities in the system.