Morphologic Analysis of Occipital Sinuses for Occipital Screw Fixation Using Digital Subtraction Angiography

The effect of the occipital sinus on the torcular Herophili and neighboring structures

Objective

The occipital sinus (OS) has many variations. It is unknown whether OS can change the angioarchitecture of torcular Herophili. Therefore, we performed magnetic resonance venography (MRV) in a cohort of Han Chinese individuals to determine whether OS can change the angioarchitecture of torcular Herophili.

Methods

Participants were divided into a normal OS group and a hyperplastic OS group. Parameters of the OS and torcular Herophili and its neighboring structures were recorded. Statistical analysis was used to determine the effects of OS on torcular Herophili and neighboring structures.

Results

One hundred forty-five healthy participants were enrolled. One hundred patients were in the normal OS group, and 45 were in the hyperplastic OS group. In the normal OS group, the diameters at the transverse sinus (TS) origin were 5.8 ± 2.3 mm on the left side and 7.5 ± 2.2 mm on the right side. In the hyperplastic OS group, the diameters at the TS origin were 6.0 ± 2.1 mm on the left side and 7.0 ± 2.7 mm on the right side. Fenestration was observed in 33% of the torculars in the normal OS group and 6.7% of the torculars in the hyperplastic group. An unpaired t-test revealed a significant difference between bilateral TSs in the normal OS group (P < 0.05) but no difference in the hyperplastic OS group. The chi-square test revealed a significant difference in torcular Herophili fenestration between the normal and hyperplastic OS groups (P < 0.05).

Conclusions

Hyperplastic OS makes bilateral TSs equal in diameter and weakens the predominance of the right TS. A hyperplastic OS reduces the occurrence of torcular Herophili fenestration.

Measurement of Deformity at the Craniovertebral Junction: Correlation of Triangular Area and Myelopathy

OBJECTIVE

Diseases of the craniovertebral junction (CVJ) are commonly associated with deformity, malalignment, and subsequent myelopathy. The misaligned CVJ might cause compression of neuronal tissues and subsequently clinical symptoms. The triangular area (TA), measured by magnetic resonance imaging/images (MRI/s), is a novel measurement for quantification of the severity of compression to the brain stem. This study aimed to assess the normal and pathological values of TA by a comparison of patients with CVJ disease to age- and sex-matched controls. Moreover, postoperative TAs were correlated with outcomes.

METHODS

Consecutive patients who underwent surgery for CVJ disease were included for comparison to an age- and sex-matched cohort of normal CVJ persons as controls. The demographics, perioperative information, and pre- and postoperative 2-year cervical MRIs were collected for analysis. Cervical TAs were measured and compared.

RESULTS

A total of 201 patients, all of whom had pre- or postoperative MRI, were analyzed. The TA of the CVJ deformity group was larger than the healthy control group (1.62 ± 0.57 cm2 vs. 1.01 ± 0.18 cm2, p < 0.001). Moreover, patients who had combined anterior odontoidectomy and posterior laminectomy with fixation had the greatest reduction in the TA (1.18 ± 0.58 cm2).

CONCLUSION

In CVJ deformity, the measurement of the cervical TA could indicate the severity of brain stem compression. After surgery, the TA had a varying degree of improvement, which could represent the efficacy of surgery.

Occipital Screw Placement Using a Navigation System for a Pathological Odontoid Fracture With a Dural Venous Sinus Variation

Conventional fluoroscopic guidance can provide enough information to precisely insert an occipital screw in ordinary cases. However, the occipital screw creates a potential risk of dural venous sinus injury or thrombosis. In some cases, with dural sinus variation, surgeons must especially be cautious to avoid its injury. We present a rare case of proper occipital screw placement using a navigation system for a pathological odontoid fracture with a high risk of dural venous sinus injury because of anatomical variations in the transverse and occipital sinuses. A 60-year-old man who underwent thyroidectomy at the age of 37 years for thyroid carcinoma developed acute neck pain and quadriparesis due to falling out of bed. He urgently underwent closed reduction and temporary immobilization with a halo-vest for a pathological odontoid fracture and atlantoaxial dislocation. Preoperative contrast-enhanced CT showed an absent right transverse sinus and a prominent occipital sinus as variations of the dural venous sinuses. Occipito-C7 fusion surgery was performed without intraoperative active venous bleeding or postoperative brain disorder by using a navigation system for the occipital screw placement to avoid injury to the dural sinus. Postoperative computed tomography showed bi-cortical occipital screw placement avoiding the prominent occipital sinus. The patient’s postoperative course was uneventful. In this case, although rigid occipito-cervical fixation using bi-cortical occipital screws was needed for the pathological odontoid fracture, the variation of the occipital sinus created a high risk of injury during occipital screw placement with conventional fluoroscopic guidance. There is an anatomical variation of the dural venous sinuses between individuals. Prominent occipital sinus injury may notably cause fatal complications such as massive bleeding or occlusion. Thus, we safely inserted the occipital screws using a navigation system that enabled us to avoid occipital venous sinus injury. Occipital screw placement with a navigation system can be a better option to prevent dural venous sinus injury in cases where there is variation in the dural venous sinuses, such as with a prominent occipital venous sinus.

Bridging veins of the cerebellum: a magnetic resonance imaging study

PURPOSE

To date, no study has yet explored the bridging veins (BVs) of the cerebellum using neuroimaging modalities. Therefore, this study aimed to characterize them using magnetic resonance imaging (MRI).

METHODS

A total of 90 patients with intact cerebellar hemispheres and intracranial dural sinuses underwent thin-sliced, contrast-enhanced MRI.

RESULTS

The BVs were classified into six routes based on the draining pattern into the dural sinuses. The superior vermian vein emptying into the straight sinus was delineated in 100% of the patients. The inferior vermian vein emptying into the confluence of the sinuses was identified in 66.7% of the patients. The inferior hemispheric and cerebellar cortical veins emptying into the transverse sinus were identified in 54.4% and 26.7% of the patients, respectively. The inferior vermian and cerebellar cortical veins emptying into the straight sinus were identified in 77.8% and 12.2% of the patients, respectively. The cerebellar cortical vein emptying into the tentorial sinus was identified in 83.3% of the patients; it was delineated on 54 sides with an average number per right hemisphere of 1.9 and 63 sides with an average number per left hemisphere of 2. The pontine-trigeminal and anterior hemispheric veins emptying into the superior petrosal sinus were identified in 42.2% of the patients.

CONCLUSIONS

The BVs of the cerebellum can be classified into six distinct routes. Radiological classification may be useful for understanding the drainage pattern of the cerebellum.

Evaluation and Surgical Planning for Craniovertebral Junction Deformity

Craniovertebral junction (CVJ) deformity is a challenging pathology that can result in progressive deformity, myelopathy, severe neck pain, and functional disability, such as difficulty swallowing. Surgical management of CVJ deformity is complex for anatomical reasons; given the discreet relationships involved in the surrounding neurovascular structures and intricate biochemical issues, access to this region is relatively difficult. Evaluation of the reducibility, CVJ alignment, and direction of the mechanical compression may determine surgical strategy. If CVJ deformity is reducible, posterior in situ fixation may be a viable solution. If the deformity is rigid and the C1–2 facet is fixed, osteotomy may be necessary to make the C1–2 facet joint reducible. C1–2 facet release with vertical reduction technique could be useful, especially when the C1–2 facet joint is the primary pathology of CVJ kyphotic deformity or basilar invagination. The indications for transoral surgery are becoming as narrow as a treatment for CVJ deformity. In this article, we will discuss CVJ alignment and various strategies for the management of CVJ deformity and possible ways to prevent complications and improve surgical outcomes.

Anatomical analysis of the occipital bone in patients with basilar invagination: a computed tomography-based study

BACKGROUND CONTEXT

The occipital bone is often involved in the surgical treatment of basilar invagination (BI). However, the anatomy of the occipital bone associated with BI patients has yet to be investigated.

PURPOSE

To present a morphological map of the occipital bone in BI patients and help guide screw placement for occipitocervical fusion.

STUDY DESIGN

A retrospective case-control study.

METHODS

Radiological measurements of the occipital bone were performed on computed tomography images based on a matrix of 99 points centered around the external occipital protuberance (EOP) in a cohort of 50 BI patients and 50 cases with no head and cervical disease. The comparison between the BI group and the control group was assessed using Student t analysis and p<.05 was considered statistically significant.

RESULTS

All thicknesses measured from points of the matrix in the BI group were thinner than those in the control group (p<.05). The maximum thicknesses in both groups were located at the center of the EOP, which were 15.11±2.84 mm in the BI group and 17.56±3.03 mm in the control group, respectively. Additionally, thickness decreased with the distance away from the center of EOP.

CONCLUSIONS

The occipital bone in BI patients is thinner than that in the general population. A limited safe zone in BI patients is available for surgeons to place screws, which may need to be fully evaluated before operation.