Chemiluminescence determination of citrate and pyruvate and their mixtures by the stopped-flow mixing technique

Chemiluminescence data modeling using parallel factor analysis for the simple and sensitive determination of diphenoxylate in human plasma and tablets

In this study, a chemiluminescence (CL) method was developed to determine diphenoxylate in tablets and human plasma. This is the first CL method proposed to determine diphenoxylate. Creating three-dimensional data caused the parallel factor analysis algorithm (PARAFAC) to be used for the first time in CL methods. The method is based on the fact that diphenoxylate enhances the weak CL produced in the reaction of Ru(phen)3 2+ and acidic Ce(IV), and the concentration of Ce(IV) solution has a different effect on the CL response of diphenoxylate and the blank plasma. The calibration curve was linear from 4.0 × 10-8 to 1.6 × 10-6 mol L-1 (R2 = 0.9954), and the detection limit was 1.3 × 10-8 mol L-1 (S/N = 3). The sampling rate was about 30 samples per hour, and the % RSD for 10 repeated measurements of 4 × 10-7 mol L-1 diphenoxylate was 5.4%. The interference effects of some ions, amino acids, and common additives were also investigated. The CL method was successfully used to determine diphenoxylate in tablets, and the results were statistically confirmed by the reference method. The proposed CL method and the PARAFAC algorithm were successfully used to determine the concentration of diphenoxylate in human blood plasma samples.

Simultaneous colorimetric detection of nephrolithiasis biomarkers using a microfluidic paper-based analytical device

A microfluidic paper-based analytical device (μPAD) coupled with colorimetric detection was developed for simultaneous determination of urinary oxalate, citrate and uric acid (UA) which are important biomarkers of nephrolithiasis or kidney stones. The colorimetric detections were based on enzymatic reactions using oxalate oxidase and uricase for oxalate and UA, respectively, while an indicator displacement assay (IDA) using a copper murexide complex was applied for citrate detection. The developed μPAD was successfully applied for simultaneous determination of the three biomarkers in urine within 25 min, with linear ranges of 2-40, 5-150, and 5-45 mg L^-1 and detection limits of 0.6, 2.9 and 3.1 mg L^-1 for oxalate, UA, and citrate, respectively. The values of the percent relative standard deviation (% RSD) were lower than 6.4% for inter-day and intraday measurements of oxalate, citrate and UA standards spiked in urine samples with recovery percentages in the range of 81.0-109.8%, indicating acceptable accuracy and precision of the developed method for determination of the three biomarkers in urine samples. Accordingly, the developed μPAD holds great promise to be a simple, fast, inexpensive, low-sample and reagent volume, reliable and portable tool for simultaneous determination of oxalate, citrate and UA in urine, especially for on-site analysis.

A highly sensitive colorimetric approach based on tris (bipyridine) Ruthenium (II/III) mediator for the enzymatic detection of phenylalanine

The accurate monitoring of phenylalanine concentration plays a prominent role in the treatment of phenylketonuria (PKU). In this study, we present an enzymatic assay based on Phenylalanine Dehydrogenase/NAD⁺ and tris (bipyridine) Ruthenium (II/III) as a colorimetric mediator for the detection of Phenylalanine concentration. The amount of amino acid was quantitatively recognized by optical absorption measurements at 452 nm through the conversion of Ru (byp)₃ ³⁺ to Ru (byp)₃ ²⁺, which is induced by the neoformed NADH. A detection limit of 0.33 µM, a limit of quantification of 1.01 µM, and a sensitivity of 36.6 a.u nM^-1 were obtained. The proposed method was successfully tested using biological specimens from patients affected by hyperphenylalaninemia. The proposed enzymatic assay showed a high selectivity, making it a promising alternative for the development of versatile assays for the detection of phenylalanine in diluted serums.

Stopped-flow chemiluminescence determination of the anticancer drug capecitabine: Application in pharmaceutical analysis and drug-delivery systems

Capecitabine is a chemotherapeutic agent used for the treatment of patients with metastatic cancers. This study aimed at determining the drug capecitabine in a simple chemiluminescence (CL) system of acidic potassium permanganate using the stopped-flow injection technique. Statistical methods were used to detect optimum conditions. The method showed two linear calibration ranges from 6.7 × 10^-6 to 6.7 × 10^-5 mol L^-1 and from 6.7 × 10^-5 to 2.7 × 10^-3 mol L^-1 with a detection limit of 1.5 × 10^-6 mol L^-1 . Chitosan-modified magnetic nanoparticles were studied in the drug-delivery experiments. According to the pH sensitivity of chitosan and low pH values in tumour cells, the chitosan-coated magnetic nanoparticles could provide a good targeting drug-delivery system to tumour sites. To evaluate the applicability of the method, the capecitabine-loaded magnetic chitosan nanoparticles were synthesized with two different cross-linkers; loading and releasing rates of the drug were investigated using the proposed CL method and an ultraviolet-visible light spectrophotometric method (absorption at 305 nm). The results showed a good correlation between the two methods, and it was found that the synthesized chitosan-modified magnetic nanoparticles could be used for pH-dependent release of capecitabine in cancer cells. Moreover, determination of capecitabine in tablets and synthetic samples was performed.

Simultaneous chemiluminescence determination of citric acid and oxalic acid using multi-way partial least squares regression

A novel kinetic chemiluminescent method proposed for the simultaneous determination of oxalic acid and citric acid in their mixtures.

Simultaneous determination of captopril and hydrochlorothiazide by time-resolved chemiluminescence with artificial neural network calibration

The combined use of chemometrics and chemiluminescence (CL) measurements, with the aid of the stopped-flow mixing technique, developed a simple time-resolved CL method for the simultaneous determination of captopril (CPL) and hydrochlorothiazide (HCT). The stopped-flow technique in a continuous-flow system was employed in this work in order to emphasize the kinetic differences between the two analytes in cerium (IV)-rhodamine 6G CL system. After the flow was stopped, an initial rise of CL signal was observed for HCT standards, while a direct decay of CL signal was obtained for CPL standards. The mixed CL signal was monitored and recorded on the whole process of continuousflow/stopped-flow, and the obtained data were processed by the chemometric approach of artificial neural network. The relative prediction error (RPE) of CPL and HCT was 5.9% and 8.7%, respectively. The recoveries of CPL and HCT in tablets were found to fall in the range between 95% and 106%. The proposed method was successfully applied to the simultaneous determination of CPL and HCT in a compound pharmaceutical formulation.

Simultaneous chemiluminescence determination of thebaine and noscapine using support vector machine regression

In this work, a batch chemiluminescence (CL) method has been proposed for the simultaneous determination of two structurally similar alkaloids, noscapine and thebaine. The method is based on the kinetic distinction of the CL reactions of noscapine and thebaine with Ru(bipy)(3)(2+) and Ce(IV) system in a sulfuric acid medium. The least squared support vector machine (LS-SVM) regression was applied for relating the concentrations of both compounds to their CL profiles. The parameters of the model consisting of sigma(2) and gamma were optimized by constructing LS-SVM models with all possible combinations of these two parameters to select the model with the minimum root mean squared error of cross validation (RMSECV) as the best. The parameters of this model were then selected as optimized values. Under the optimized experimental conditions for both compounds, the detection limits obtained using the LS-SVM regression were 0.08 and 0.1 micromo lL(-1) for noscapine and thebaine, respectively. The proposed method was utilized for the simultaneous determination of the compounds in pharmaceutical formulations and plasma samples with satisfactory results.

Sequential injection analysis (SIA)-chemiluminescence determination of indomethacin using tris[(2,2′-bipyridyl)]ruthenium(III) as reagent and its application to semisolid pharmaceutical dosage forms

Automated sequential injection (SIA) method for chemiluminescence (CL) determination of nonsteroidal anti-inflammatory drug indomethacin (I) was devised. The CL radiation was emitted in the reaction of I (dissolved in aqueous 50% v/v ethanol) with intermediate reagent tris(2,2'-bipyridyl)ruthenium(III) (Ru(bipy)(3)(3+)) in the presence of acetate. The Ru(bipy)(3)(3+) was generated on-line in the SIA system by the oxidation of 0.5mM tris(2,2'-bipyridyl)ruthenium(II) (Ru(bipy)(3)(2+)) with Ce(IV) ammonium sulphate in diluted sulphuric acid. The optimum sequence, concentrations, and aspirated volumes of reactant zones were: 15 mM Ce(IV) in 50mM sulphuric acid 41 microL, 0.5 mM Ru(bipy)(3)(2+) 30 microL, 0.4M Na acetate 16 microL and I sample 15 microL; the flow rates were 60 microLs(-1) for the aspiration into the holding coil and 100 microLs(-1) for detection. Calibration curve relating the intensity of CL (peak height of the transient CL signal) to concentration of I was curvilinear (second order polynomial) for 0.1-50 microM I (r=0.9997; n=9) with rectilinear section in the range 0.1-10 microM I (r=0.9995; n=5). The limit of detection (3sigma) was 0.05 microM I. Repeatability of peak heights (R.S.D., n=10) ranged between 2.4% (0.5 microM I) and 2.0% (7 microM I). Sample throughput was 180 h(-1). The method was applied to determination of 1 to 5% of I in semisolid dosage forms (gels and ointments). The results compared well with those of UV spectrophotometric method.

Tris(2,2′-bipyridyl)ruthenium(ii) chemiluminescence enhanced by silver nanoparticles

Mixtures of silver(I) and citrate that are used to produce silver nanoparticles evoke intense chemiluminescence with tris(2,2'-bipyridyl)ruthenium(II) and cerium(IV), which can be exploited for the determination of citrate ions and other analytes over a wide concentration range.

A turn-on fluorescent indicator for citrate with micromolar sensitivity

A turn-on fluorescent indicator for citric acid (citrate) has been developed, displaying high emission enhancement (+1500%) and low interference by other carboxylates. The sensor is based on the non-emissive copper(II) complex of a fluorescent amino amide, which, upon addition of citrate decomplexates to yield the emissive ligand. The detection limit estimated for this new chemosensing system is about 0.5 microM. This novel approach to the analysis of citrate constitutes an alternative ca. 10(2)-10(3) times more sensitive than the standard method based on the enzyme citrate lyase.

Tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence

This paper critically reviews analytical applications of the chemiluminescence from tris(2,2'-bipyridyl)ruthenium(II) and related compounds published in the open literature between mid-1998 and October 2005. Following the introduction, which summarises the reaction chemistry and reagent generation, the review divides into three major sections that focus on: (i) the techniques that utilise this type of detection chemistry, (ii) the range of analytes that can be determined, and (iii) analogues and derivatives of tris(2,2'-bipyridyl)ruthenium(II).